skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Influence of solidification accelerators on structure formation of anhydrite-containing binders

Abstract

The article presents results of scientific analysis of chemical additives influence on acid fluoride binder. It was found that the influence of sulfate nature additives on the process of hydration and solidification of the binder is similar to influence of additives on indissoluble anhydrite. Additives with SO{sub 4}{sup 2−} anion NO{sup −} are more efficient. The mentioned additives according to accelerating effect belong to the following succession: K{sub 2}SO{sub 4} > Na{sub 2}SO{sub 4} > FeSO{sub 4} > MgSO{sub 4}. Facilitation of the process of hydration and solidification of the binder, increase in density and durability of the binder (32 MPa) is to the greatest extent achieved with the introduction of 2% sodium sulfate additive of the binder’s mass into the composition of the binder along with the ultrasonic treatment of water solution. Directed crystal formation process with healing of porous structure by new growths presented as calcium sulfate dehydrate and hydroglauberite provides positive effect.

Authors:
; ; ; ;  [1]
  1. Tomsk State University of Architecture and Building, 2 Solyanaya sq., Tomsk, 634003 (Russian Federation)
Publication Date:
OSTI Identifier:
22494449
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1698; Journal Issue: 1; Conference: AMTC-2015: 2. all-Russian scientific conference of young scientists on advanced materials in technology and construction, Tomsk (Russian Federation), 6-9 Oct 2015; Other Information: (c) 2016 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
37 INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY; ACCELERATORS; ADDITIVES; ANHYDRITE; ANIONS; AQUEOUS SOLUTIONS; BINDERS; CALCIUM SULFATES; FLUORIDES; HARDNESS; HYDRATION; IRON SULFATES; MAGNESIUM SULFATES; NITRIC OXIDE; POROUS MATERIALS; POTASSIUM SULFATES; PRESSURE RANGE MEGA PA 10-100; SERVICE LIFE; SODIUM SULFATES; SOLIDIFICATION; WEAR RESISTANCE

Citation Formats

Anikanova, L., E-mail: alasmit@mail.ru, Volkova, O., E-mail: v.olga.nikitina@gmail.com, Kudyakov, A., Sarkisov, Y., and Tolstov, D. Influence of solidification accelerators on structure formation of anhydrite-containing binders. United States: N. p., 2016. Web. doi:10.1063/1.4937872.
Anikanova, L., E-mail: alasmit@mail.ru, Volkova, O., E-mail: v.olga.nikitina@gmail.com, Kudyakov, A., Sarkisov, Y., & Tolstov, D. Influence of solidification accelerators on structure formation of anhydrite-containing binders. United States. doi:10.1063/1.4937872.
Anikanova, L., E-mail: alasmit@mail.ru, Volkova, O., E-mail: v.olga.nikitina@gmail.com, Kudyakov, A., Sarkisov, Y., and Tolstov, D. Fri . "Influence of solidification accelerators on structure formation of anhydrite-containing binders". United States. doi:10.1063/1.4937872.
@article{osti_22494449,
title = {Influence of solidification accelerators on structure formation of anhydrite-containing binders},
author = {Anikanova, L., E-mail: alasmit@mail.ru and Volkova, O., E-mail: v.olga.nikitina@gmail.com and Kudyakov, A. and Sarkisov, Y. and Tolstov, D.},
abstractNote = {The article presents results of scientific analysis of chemical additives influence on acid fluoride binder. It was found that the influence of sulfate nature additives on the process of hydration and solidification of the binder is similar to influence of additives on indissoluble anhydrite. Additives with SO{sub 4}{sup 2−} anion NO{sup −} are more efficient. The mentioned additives according to accelerating effect belong to the following succession: K{sub 2}SO{sub 4} > Na{sub 2}SO{sub 4} > FeSO{sub 4} > MgSO{sub 4}. Facilitation of the process of hydration and solidification of the binder, increase in density and durability of the binder (32 MPa) is to the greatest extent achieved with the introduction of 2% sodium sulfate additive of the binder’s mass into the composition of the binder along with the ultrasonic treatment of water solution. Directed crystal formation process with healing of porous structure by new growths presented as calcium sulfate dehydrate and hydroglauberite provides positive effect.},
doi = {10.1063/1.4937872},
journal = {AIP Conference Proceedings},
number = 1,
volume = 1698,
place = {United States},
year = {Fri Jan 15 00:00:00 EST 2016},
month = {Fri Jan 15 00:00:00 EST 2016}
}
  • X-ray diffraction, microscopic, and thermogravimetric analysis were used to study the influence of organic binders on the YBa[sub 2]Cu[sub 3]O[sub 7[minus][delta]] and Bi[sup 2[minus]x]Pb[sub x]Ca[sub 2]Sr[sub 2]Cu[sub 3]O[sub y] thick film coating formation. It was a shown by the example of 1,3-butylene glycol, terpineol, tetraethylene glycol, ethylene glycol, and glycerine that during the film synthesis of the organic binder can react with the superconducting phase causing its degradation. The degree of degradation depends on heat treatment conditions of samples and the reducing power of an organic substance chosen to serve as the binding element. A transformation of YBa[sub 2]Cu[sub 3]O[submore » 7[minus][delta]] orthorhombic modification into the tetragonal one is possible at T = 300[degrees]C in air under the influence of strong reductants, such as tetraethylene glycol, ethylene glycol, and glycerine. In a He atmosphere at T = 450[degrees]C this compound completely decomposes into Y[sub 2]O[sub 3], BaCO[sub 3], and metallic Cu. When heated with 1,3-butylene glycol and terpineol in air, Bi[sub 2[minus]x]Pb[sub x]Ca[sub 2]Sr[sub 2]Cu[sub 3]O[sub y] powders do not change considerably, while in the mixture with tetraethylene glycol and glycerine they decompose completely into metallic Bi and Cu and Ca and Sr carbonates at T = 300[degrees]C. A similar effect is produced on Bi[sub 2[minus]x]Pb[sub x]Ca[sub 2]Sr[sub 2]Cu[sub 3]O[sub y] by 1,3-butylene glycol and terpineol when heated in an inert atmosphere. It was determined that ethylene glycol and glycerine rather actively interact with the powder-like Bi[sub 2[minus]x]Pb[sub x]Ca[sub 2]Sr[sub 2]Cu[sub 3]O[sub y] even at room temperatures.« less
  • Results of studies are presented using simulators of wastes from nuclear power plants with RBMK (high-boiling channel reactor) and VVER (Water-cooled-water-moderated power reactor) and AST-500. They studied the effect of separate components of the wastes on the strength of the product formed for three types of binders: Portland cement, slag-1, and Portland blast-furnace cement. The permissible amount of components whose presence is discernible was determined. The studies performed showed that by selecting the appropriate binder and conditions for carrying out the process, products with a high salt content and mechanical strength exceeding 100 kgf/cm/sup 2/ can be obtained.
  • Fly ashes from cellulose industries originate from different internal waste combustion processes. Because they contain considerable amounts of free lime and anhydrite, they are potential secondary raw materials for the production of building products. The source of the CaO is a Ca-bisulfite-sludge originating from the cellulose extraction process. The CaO/anhydrite ratio in this lime-sulfate fly ash depends on the extent of sulphur reduction by organic carbon during the combustion process. A second type of Al-bearing ash contains additionally lowly reactive calcium silicates and highly reactive calcium aluminate phases originating from combusted paper sludge containing kaolinite. Both ashes show a reducedmore » reactivity compared to commercial lime as it is used for the production of autoclaved aerated concrete. The reduced activity is related to the coated surfaces of the CaO and elevated sulfate and alkali contents.« less
  • The use of underwater wet welding for offshore repairs has been limited mainly because of porosity in the resulting welds. With appropriate consumable design, however, it is possible to enhance weld metal toughness and reduce porosity. Surface and underwater wet welds, obtained with E6013 grade electrodes modified with systematic titanium and boron additions, were prepared and analyzed to explain, in terms of the fundamentals of inclusion formation during weld solidification, any increase in acicular ferrite. It was demonstrated that in underwater wet welding, over 60% vol. acicular ferrite can be obtained, through titanium and boron additions to the electrode covering.more » The presence of titanium resulted in the formation of inclusions which assisted the formation of acicular ferrite in the underwater welds and countered the rapid quenching effect of the underwater environment. Boron additions decreased the amount of grain boundary ferrite, further improving the microstructure. It was shown that the weld metal titanium and boron compositional ranges for acicular ferrite maximization varied with the heat input and the cooling rate. Porosity reduction was possible through the addition of calcium carbonate at approximately 13% wt. in the flux covering. However, weld metal decarburization also occurred with the addition. The Zener diameter approach was used to relate the inclusion size and austenite grain size, and to explain the resulting microstructure.« less
  • In this study Direct evidence for subsurface dissolution of interstitial anhydrite in both dolomite grainstones and quartz sandstones includes: cleavage-related dissolution fringe on anhydrite crystal surfaces, and isolated remnants of optically continuous (formerly poikilotopic) anhydrite. Experimentally etched anhydrite surfaces exhibit features that directly compare to the dissolution fringe, whereas experimentally grown anhydrite does not. We deduced the following sequence of anhydrite dissolution within dolomite grainstones and quartz sandstones. Slow incipient dissolution began along the boundaries between anhydrite and adjacent minerals. From these intercrystalline boundaries, solutions penetrated anhydrite cleavages, leading to more rapid preferential dissolution perpendicular to the more prominent cleavagemore » planes. The widened cleavage planes, together with intercrystalline boundaries, acted as conduits for the removal of dissolved ions. In the final stage, as dissolving anhydrite borders retreated toward pore throats, dissolution slowed and was, again, restricted to intercrystalline boundaries. This process was then repeated in adjacent interstices.« less