skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Multiscale surface roughening of commercial purity titanium during uniaxial tension

Abstract

The mechanisms of the surface roughening of the titanium specimens during uniaxial tension were demonstrated. By means of optical profilometry and electron backscattered diffraction it was shown that the formation of surface roughening is a multilevel process. The correlation between the density of slip in some grains, and grain rotation, and their displacement towards the free surface was investigated.

Authors:
 [1];  [2]; ; ;  [1]; ;  [3]
  1. Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation)
  2. (Russian Federation)
  3. National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation)
Publication Date:
OSTI Identifier:
22492578
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1683; Journal Issue: 1; Conference: International conference on advanced materials with hierarchical structure for new technologies and reliable structures 2015, Tomsk (Russian Federation), 21-25 Sep 2015; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; BACKSCATTERING; DENSITY; ELECTRON DIFFRACTION; IMPURITIES; ROTATION; ROUGHNESS; SLIP; SURFACES; TITANIUM

Citation Formats

Panin, Alexey, E-mail: pav@ispms.tsc.ru, National Research Tomsk Polytechnic University, Tomsk, 634050, Kazachenok, Marina, E-mail: kms@ispms.tsc.ru, Kozelskaya, Anna, E-mail: annakozelskaya@gmail.com, Sinyakova, Elena, E-mail: mea@ispms.tsc.ru, Lider, Andrey, E-mail: lider@tpu.ru, and Sklyarova, Elena, E-mail: skea@tpu.ru. Multiscale surface roughening of commercial purity titanium during uniaxial tension. United States: N. p., 2015. Web. doi:10.1063/1.4932863.
Panin, Alexey, E-mail: pav@ispms.tsc.ru, National Research Tomsk Polytechnic University, Tomsk, 634050, Kazachenok, Marina, E-mail: kms@ispms.tsc.ru, Kozelskaya, Anna, E-mail: annakozelskaya@gmail.com, Sinyakova, Elena, E-mail: mea@ispms.tsc.ru, Lider, Andrey, E-mail: lider@tpu.ru, & Sklyarova, Elena, E-mail: skea@tpu.ru. Multiscale surface roughening of commercial purity titanium during uniaxial tension. United States. doi:10.1063/1.4932863.
Panin, Alexey, E-mail: pav@ispms.tsc.ru, National Research Tomsk Polytechnic University, Tomsk, 634050, Kazachenok, Marina, E-mail: kms@ispms.tsc.ru, Kozelskaya, Anna, E-mail: annakozelskaya@gmail.com, Sinyakova, Elena, E-mail: mea@ispms.tsc.ru, Lider, Andrey, E-mail: lider@tpu.ru, and Sklyarova, Elena, E-mail: skea@tpu.ru. 2015. "Multiscale surface roughening of commercial purity titanium during uniaxial tension". United States. doi:10.1063/1.4932863.
@article{osti_22492578,
title = {Multiscale surface roughening of commercial purity titanium during uniaxial tension},
author = {Panin, Alexey, E-mail: pav@ispms.tsc.ru and National Research Tomsk Polytechnic University, Tomsk, 634050 and Kazachenok, Marina, E-mail: kms@ispms.tsc.ru and Kozelskaya, Anna, E-mail: annakozelskaya@gmail.com and Sinyakova, Elena, E-mail: mea@ispms.tsc.ru and Lider, Andrey, E-mail: lider@tpu.ru and Sklyarova, Elena, E-mail: skea@tpu.ru},
abstractNote = {The mechanisms of the surface roughening of the titanium specimens during uniaxial tension were demonstrated. By means of optical profilometry and electron backscattered diffraction it was shown that the formation of surface roughening is a multilevel process. The correlation between the density of slip in some grains, and grain rotation, and their displacement towards the free surface was investigated.},
doi = {10.1063/1.4932863},
journal = {AIP Conference Proceedings},
number = 1,
volume = 1683,
place = {United States},
year = 2015,
month =
}
  • The mechanisms of surface layer fragmentation of titanium specimens subjected to ultrasonic impact treatment is investigated by atomic force microscopy, transmission electron microscopy and electron backscatter diffraction. It is shown that the twin boundaries Σ7b and Σ11b are unable to be strong obstacles for propagation of dislocations and other twins.
  • The deformation and failure of commercial-purity (CP) titanium (grade 2) and AISI 4340 steel (tempered to R{sub c}35) during equal channel angular extrusion were determined at temperatures between 25 C and 325 C and effective strain rates between 0.002 and 2.0 s{sup {minus}1}. The CP titanium alloy underwent segmented failure under all conditions except at low strain rates and high temperatures. By contrast, the 4340 steel deformed uniformly except at the highest temperature and strain rate, at which it also exhibited segmented failure. Using flow curves and fracture data from uniaxial compression and tension tests, workability analysis was conducted tomore » establish that the failures were a result of flow localization prior to the onset of fracture. This conclusion was confirmed by metallographic examination of the failed extrusion specimens.« less
  • Heteroeneous strain was analyzed in polycrystalline, commercial-purity titanium using many experimental techniques that provide information about microstructure, dislocation arrangement, grain orientation, orientation gradients, surface topography, and local strain gradients. The recrystallized microstructure with 50-200 ?m grains was extensively characterized before and after deformation using 4-point bending to strains between 2% and 15%. Extremely heterogeneous deformation occurred along some grain boundaries, leading to orientation gradients exceeding 10{sup o} over 10-20 {micro}m. Patches of highly characterized microstructure were modeled using crystal plasticity finite element (CPFE) analysis to simulate the deformation to evaluate the ability of the CPFE model to capture local deformationmore » processes. Damage nucleation events were identified that are associated with twin interactions with grain boundaries. Progress toward identifying fracture initiation criteria based upon slip and twin interactions with grain boundaries is illustrated with related CPFE simulations of deformation in a TiAl alloy.« less
  • Heterogeneous strain was analyzed in polycrystalline, commercial-purity titanium using many experimental techniques that provide information about microstructure, dislocation arrangement, grain orientation, orientation gradients, surface topography, and local strain gradients. The recrystallized microstructure with 50-200 {micro}m grains was extensively characterized before and after deformation using 4-point bending to strains between 2% and 15%. Extremely heterogeneous deformation occurred along some grain boundaries, leading to orientation gradients exceeding 10{sup o} over 10-20 {micro}m. Patches of highly characterized micro-structure were modeled using crystal plasticity finite element (CPFE) analysis to simulate the deformation to evaluate the ability of the CPFE model to capture local deformationmore » processes. Damage nucleation events were identified that are associated with twin interactions with grain boundaries. Progress toward identifying fracture initiation criteria based upon slip and twin interactions with grain boundaries is illustrated with related CPFE simulations of deformation in a TiAl alloy.« less
  • Shot-peening is a surface treatment for metals largely used to increase their fatigue resistance. According to some authors, shot-peening gives rise to residual compressive stress in the surface layers of the metals, which could explain the fatigue resistance improvement. This is quite reasonable as this compressive stress reduces the net effect of the tensile component of the applied cyclic loading. This effect increases the fatigue resistance. There is however another point of view on this subject that ascribes less importance to the residual compressive stress influence. It is based upon work which shows that cyclic loading promotes residual surface stressmore » modification by a mechanism of local plastic microdeformation. Since in this case a surface stress decrease would occur, these papers report that in the early applied cycles, residual stress could not have any influence on the ultimate fatigue behavior of the metal. This point of view highlights the need for a study to clarify the influence of plastic deformation upon relaxation as a function of variation of the initial surface residual stress. The aim of the present work is to provide a better understanding of these questions. Steel samples of 5Cr-0.5Mo (weight percent) were submitted to shot-penning in order to build up compressive surface residual stress. The samples were plastically deformed by uniaxial tensile test until complete fracture. Longitudinal and transverse residual stresses were measured before and during the test.« less