skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Characterization of coarse bainite transformation in low carbon steel during simulated welding thermal cycles

Abstract

Coarse austenite to bainite transformation in low carbon steel under simulated welding thermal cycles was morphologically and crystallographically characterized by means of optical microscope, transmission electron microscope and electron backscattered diffraction technology. The results showed that the main microstructure changes from a mixture of lath martensite and bainitic ferrite to granular bainite with the increase in cooling time. The width of bainitic laths also increases gradually with the cooling time. For a welding thermal cycle with relatively short cooling time (e.g. t{sub 8/5} is 30 s), the main mode of variant grouping at the scale of individual prior austenite grains changes from Bain grouping to close-packed plane grouping with the progress of phase transformation, which results in inhomogeneous distribution of high angle boundaries. As the cooling time is increased, the Bain grouping of variants becomes predominant mode, which enlarges the effective grain size of product phase. - Highlights: • Main microstructure changes and the width of lath structure increases with cooling time. • Variant grouping changes from Bain zone to close-packed plane grouping with the transformation. • The change of variant grouping results in uneven distribution of high angle grain boundary. • Bain grouping is main mode for large heatmore » input, which lowers the density of high angle boundary.« less

Authors:
 [1];  [1];  [2]
  1. School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819 (China)
  2. State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110819 (China)
Publication Date:
OSTI Identifier:
22476114
Resource Type:
Journal Article
Journal Name:
Materials Characterization
Additional Journal Information:
Journal Volume: 105; Other Information: Copyright (c) 2015 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 1044-5803
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; AUSTENITE; BAINITE; CARBON STEELS; CRYSTALLOGRAPHY; DENSITY; DIFFRACTION; DISTRIBUTION; FERRITES; GRAIN BOUNDARIES; GRAIN SIZE; MARTENSITE; OPTICAL MICROSCOPES; PHASE TRANSFORMATIONS; SIMULATION; TRANSFORMATIONS; TRANSMISSION ELECTRON MICROSCOPY; WELDING

Citation Formats

Lan, Liangyun, State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110819, Kong, Xiangwei, and Qiu, Chunlin. Characterization of coarse bainite transformation in low carbon steel during simulated welding thermal cycles. United States: N. p., 2015. Web. doi:10.1016/J.MATCHAR.2015.05.010.
Lan, Liangyun, State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110819, Kong, Xiangwei, & Qiu, Chunlin. Characterization of coarse bainite transformation in low carbon steel during simulated welding thermal cycles. United States. https://doi.org/10.1016/J.MATCHAR.2015.05.010
Lan, Liangyun, State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110819, Kong, Xiangwei, and Qiu, Chunlin. Wed . "Characterization of coarse bainite transformation in low carbon steel during simulated welding thermal cycles". United States. https://doi.org/10.1016/J.MATCHAR.2015.05.010.
@article{osti_22476114,
title = {Characterization of coarse bainite transformation in low carbon steel during simulated welding thermal cycles},
author = {Lan, Liangyun and State Key Laboratory of Rolling Technology and Automation, Northeastern University, Shenyang 110819 and Kong, Xiangwei and Qiu, Chunlin},
abstractNote = {Coarse austenite to bainite transformation in low carbon steel under simulated welding thermal cycles was morphologically and crystallographically characterized by means of optical microscope, transmission electron microscope and electron backscattered diffraction technology. The results showed that the main microstructure changes from a mixture of lath martensite and bainitic ferrite to granular bainite with the increase in cooling time. The width of bainitic laths also increases gradually with the cooling time. For a welding thermal cycle with relatively short cooling time (e.g. t{sub 8/5} is 30 s), the main mode of variant grouping at the scale of individual prior austenite grains changes from Bain grouping to close-packed plane grouping with the progress of phase transformation, which results in inhomogeneous distribution of high angle boundaries. As the cooling time is increased, the Bain grouping of variants becomes predominant mode, which enlarges the effective grain size of product phase. - Highlights: • Main microstructure changes and the width of lath structure increases with cooling time. • Variant grouping changes from Bain zone to close-packed plane grouping with the transformation. • The change of variant grouping results in uneven distribution of high angle grain boundary. • Bain grouping is main mode for large heat input, which lowers the density of high angle boundary.},
doi = {10.1016/J.MATCHAR.2015.05.010},
url = {https://www.osti.gov/biblio/22476114}, journal = {Materials Characterization},
issn = {1044-5803},
number = ,
volume = 105,
place = {United States},
year = {2015},
month = {7}
}