skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Bench-scale co-processing. Quarterly report No. 5, April 1, 1989--June 30, 1989

Abstract

This quarterly report is the fifth for Contract DE-AC22-87PC79818. Objective is to extend and optimize UOP`s single-stage slurry-catalyzed co-processing scheme, which was devleoped under previous Contract DE-AC22-84PC70002. Particular emphasis is given to defining and improving ssscatalyst utilization and costs, evaluating alternative and disposable slsurry-catalyst systems, and improving catalyst recycle and recovery techniques. Work during this quarter has concentrated on Tasks 3.1.1 (pilot plant modification), 3.1.2 (plant recertification), and 3.1.3 (reactor back-mixing study). Results of these tasks are discussed.

Authors:
; ; ;
Publication Date:
Research Org.:
UOP, Inc., Des Plaines, IL (United States)
Sponsoring Org.:
USDOE, Washington, DC (United States)
OSTI Identifier:
224234
Report Number(s):
DOE/PC/79818-T16
ON: DE96010125
DOE Contract Number:
AC22-87PC79818
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 23 Aug 1989
Country of Publication:
United States
Language:
English
Subject:
01 COAL, LIGNITE, AND PEAT; 02 PETROLEUM; COAL; COPROCESSING; PETROLEUM RESIDUES; CATALYSTS; VANADIUM; CATALYTIC EFFECTS; IRON; PROGRESS REPORT; EXPERIMENTAL DATA; BENCH-SCALE EXPERIMENTS; RECYCLING; FLOWSHEETS

Citation Formats

Nafis, D.A., Gatsis, J.G., Lea, C., and Miller, M.A. Bench-scale co-processing. Quarterly report No. 5, April 1, 1989--June 30, 1989. United States: N. p., 1989. Web. doi:10.2172/224234.
Nafis, D.A., Gatsis, J.G., Lea, C., & Miller, M.A. Bench-scale co-processing. Quarterly report No. 5, April 1, 1989--June 30, 1989. United States. doi:10.2172/224234.
Nafis, D.A., Gatsis, J.G., Lea, C., and Miller, M.A. Wed . "Bench-scale co-processing. Quarterly report No. 5, April 1, 1989--June 30, 1989". United States. doi:10.2172/224234. https://www.osti.gov/servlets/purl/224234.
@article{osti_224234,
title = {Bench-scale co-processing. Quarterly report No. 5, April 1, 1989--June 30, 1989},
author = {Nafis, D.A. and Gatsis, J.G. and Lea, C. and Miller, M.A.},
abstractNote = {This quarterly report is the fifth for Contract DE-AC22-87PC79818. Objective is to extend and optimize UOP`s single-stage slurry-catalyzed co-processing scheme, which was devleoped under previous Contract DE-AC22-84PC70002. Particular emphasis is given to defining and improving ssscatalyst utilization and costs, evaluating alternative and disposable slsurry-catalyst systems, and improving catalyst recycle and recovery techniques. Work during this quarter has concentrated on Tasks 3.1.1 (pilot plant modification), 3.1.2 (plant recertification), and 3.1.3 (reactor back-mixing study). Results of these tasks are discussed.},
doi = {10.2172/224234},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Wed Aug 23 00:00:00 EDT 1989},
month = {Wed Aug 23 00:00:00 EDT 1989}
}

Technical Report:

Save / Share:
  • The high-severity co-processing long-term operability test and the detailed product analyses from the operability test have been completed. Operational data and detailed product analyses have been used to characterize the high-severity co-processing operation. Using the process characterizations, yield estimate for a commercial-sized high-severity co-processing unit has been performed using operational data and detailed product analysis from the long-term operability study. The estimate is based on a co-processing unit processing the vacuum resid from 50,000 barrels per day (BPD) of Lloydminster crude and also processing 2,400 metric tons per day (MT/day) of Illinois No. 6 coal. The feedstock characteristics for themore » yield estimate are summarized in Table 1.« less
  • Under the current contract, the Babcock and Wilcox Company (B and W) and its subcontractors, Westinghouse Electric Corp. and the University of Tennessee Space Institute (UTSI) and its associate, Argonne National Laboratory (ANL) will carry out Phase 1 of a two phase study of an MHD Seed Recovery Process. The process is based on the reduction of the potassium-sulfur compounds in the spent seed/ash mixture to the sulfide in a near adiabatic step. This is followed by the release of sulfur using carbon dioxide from flue gas and conversion of the resulting gaseous sulfur compounds to elemental sulfur. Phase 1more » includes bench-scale investigations of two alternative reduction steps and two alternative sulfur release steps. The results of these studies will be used as part of the input to design a proof-of-concept plant and to estimate the cost of a commercial scale plant. During this reporting period, April 1 through June 30, 1988, the evaluation of the two reduction steps has been completed. Work on the sulfur release has been initiated. Progress made in these areas is presented in this report. 3 tabs.« less
  • The objective of this contract is to extend and optimize UOP`s single-stage, slurry-catalyzed co-processing scheme. The current task is to complete a long-term operability run using a 0.05 wt-% Mo-based catalyst at approximately 460{degrees}C. The objectives of this run are to demonstrate that high-severity conditions can be run for an extended period of time (at least one month) and to collect enough product sample to do a complete Hempel fractionation and detailed characterization of the individual naphtha, distillate, and VGO cuts. This information will be used to reevaluate the engineering design and product upgrading scheme that was developed under themore » first co-processing contract (DE-AC22-84PC70002). During the current two quarters, the long-term operability study was unsuccessfully attempted several times. This report discusses these attempts.« less
  • UOP`s second co-processing contract, DE-AC22-87PC79818, began in April 1988. The major objective of this contract is to establish a database for the optimization of the co-processing concept by improving the effectiveness of the co-processing catalyst system. Two major mechanisms for improving the catalyst system are to be investigated: employment of more effective catalysts and utilization of improved catalytic environments. These two mechanisms are defined in the contract Statement of Work under Task 3.2 as Subtask 3.2.1 and 3.2.2, respectively. This report covers a span of four quarters, starting from July 1, 1992 to June 30, 1993. During this period themore » project was in a hold. As explained below, a request was made to add more funds to the contract to investigate catalytic environment improvements. Most of the time during this four quarters was spent in preparation of the proposal, review of the proposal by PETC, and getting additional funding approved for the contract. No experimental work was carried out on any of the tasks of the contract during these four quarters. Prior to the period covered by this report, UOP had successfully completed Subtask 3.2.1 and identified a molybdenum-based catalyst that is highly active and effective in achieving improved co-processing performance at significantly lower metal concentrations (0.05 % -- 0.1 % by weight of Mo) in the catalyst. The new catalyst was developed in slurry autoclave tests demonstrated in the continuous bench-scale pilot plant.« less
  • Kinetic studies of catalytic methanation in a gradientless reactor represent the first phase of our experimental program. We have examined methanation kinetics at elevated pressures for the iridium-promoted nickel catalyst and compared it to the performance of an industrial nickel methanation catalyst on exposure to syn gas (CO, H/sub 2/). In these measurements, covering a pressure range from 60 to 1000 psig at temperatures from 550 to 575/sup 0/K, the synthesis gas contained up to 25 vol % CO (the remainder was H/sub 2/). The kinetics of methanation exhibit negative order with respect to CO and positive order with respectmore » to H/sub 2/. The hydrogen effect is particularly pronounced for the Ir-promoted Ni/Al/sub 2/O/sub 3/ catalyst. The formation of ethane was observed at H/sub 2//CO < 15. A series of measurements with catalysts partially deactivated by exposure to H/sub 2/S, demonstrated that the Ir-promoted Ni catalyst exhibited much higher activity than the Ni catalyst after the same dosage of the sulfur compound.« less