skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Active and passive kink mode studies in a tokamak with a movable ferromagnetic wall

Abstract

High-resolution active and passive kink mode studies are conducted in a tokamak with an adjustable ferromagnetic wall near the plasma surface. Ferritic tiles made from 5.6 mm thick Hiperco{sup ®} 50 alloy have been mounted on the plasma-facing side of half of the in-vessel movable wall segments in the High Beta Tokamak-Extended Pulse device [D. A. Maurer et al., Plasma Phys. Controlled Fusion 53, 074016 (2011)] in order to explore ferritic resistive wall mode stability. Low-activation ferritic steels are a candidate for structural components of a fusion reactor, and these experiments examine MHD stability of plasmas with nearby ferromagnetic material. Plasma-wall separation for alternating ferritic and non-ferritic wall segments is adjusted between discharges without opening the vacuum vessel. Amplification of applied resonant magnetic perturbations and plasma disruptivity are observed to increase when the ferromagnetic wall is close to plasma surface instead of the standard stainless steel wall. Rapidly rotating m/n=3/1 external kink modes have higher growth rates with the nearby ferritic wall. Feedback suppression of kinks is still as effective as before the installation of ferritic material in vessel, in spite of increased mode growth rates.

Authors:
; ; ; ; ; ; ; ;  [1]
  1. Department of Applied Physics and Applied Mathematics, Columbia University, 500 W. 120th Street, New York, New York 10027 (United States)
Publication Date:
OSTI Identifier:
22410383
Resource Type:
Journal Article
Journal Name:
Physics of Plasmas
Additional Journal Information:
Journal Volume: 22; Journal Issue: 5; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 1070-664X
Country of Publication:
United States
Language:
English
Subject:
70 PLASMA PHYSICS AND FUSION TECHNOLOGY; CONTAINERS; DISTURBANCES; FERRITIC STEELS; FERROMAGNETIC MATERIALS; FIRST WALL; HIGH-BETA PLASMA; HIPERCO; KINK INSTABILITY; MAGNETOHYDRODYNAMICS; STABILITY; STAINLESS STEELS; THERMONUCLEAR REACTORS; TOKAMAK DEVICES

Citation Formats

Levesque, J. P., Hughes, P. E., Bialek, J., Byrne, P. J., Mauel, M. E., Navratil, G. A., Peng, Q., Rhodes, D. J., and Stoafer, C. C. Active and passive kink mode studies in a tokamak with a movable ferromagnetic wall. United States: N. p., 2015. Web. doi:10.1063/1.4918360.
Levesque, J. P., Hughes, P. E., Bialek, J., Byrne, P. J., Mauel, M. E., Navratil, G. A., Peng, Q., Rhodes, D. J., & Stoafer, C. C. Active and passive kink mode studies in a tokamak with a movable ferromagnetic wall. United States. doi:10.1063/1.4918360.
Levesque, J. P., Hughes, P. E., Bialek, J., Byrne, P. J., Mauel, M. E., Navratil, G. A., Peng, Q., Rhodes, D. J., and Stoafer, C. C. Fri . "Active and passive kink mode studies in a tokamak with a movable ferromagnetic wall". United States. doi:10.1063/1.4918360.
@article{osti_22410383,
title = {Active and passive kink mode studies in a tokamak with a movable ferromagnetic wall},
author = {Levesque, J. P. and Hughes, P. E. and Bialek, J. and Byrne, P. J. and Mauel, M. E. and Navratil, G. A. and Peng, Q. and Rhodes, D. J. and Stoafer, C. C.},
abstractNote = {High-resolution active and passive kink mode studies are conducted in a tokamak with an adjustable ferromagnetic wall near the plasma surface. Ferritic tiles made from 5.6 mm thick Hiperco{sup ®} 50 alloy have been mounted on the plasma-facing side of half of the in-vessel movable wall segments in the High Beta Tokamak-Extended Pulse device [D. A. Maurer et al., Plasma Phys. Controlled Fusion 53, 074016 (2011)] in order to explore ferritic resistive wall mode stability. Low-activation ferritic steels are a candidate for structural components of a fusion reactor, and these experiments examine MHD stability of plasmas with nearby ferromagnetic material. Plasma-wall separation for alternating ferritic and non-ferritic wall segments is adjusted between discharges without opening the vacuum vessel. Amplification of applied resonant magnetic perturbations and plasma disruptivity are observed to increase when the ferromagnetic wall is close to plasma surface instead of the standard stainless steel wall. Rapidly rotating m/n=3/1 external kink modes have higher growth rates with the nearby ferritic wall. Feedback suppression of kinks is still as effective as before the installation of ferritic material in vessel, in spite of increased mode growth rates.},
doi = {10.1063/1.4918360},
journal = {Physics of Plasmas},
issn = {1070-664X},
number = 5,
volume = 22,
place = {United States},
year = {2015},
month = {5}
}