skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Feasibility of bit patterned media for HAMR at 5 Tb/in{sup 2}

Abstract

We have investigated the feasibility of BPM for HAMR via Finite Difference Time Domain and atomistic simulation and we have substantiated the feasibility of 5 Tb/in{sup 2} with two filling factors 25% and 56% even when the maximum on-track bit temperature is below the Curie temperature. The success of this underheated switching is attributed to sufficiently low anisotropy instead of reduction of Curie temperature. The temperature gradient in the cross-track direction is almost doubled if the optical head width is reduced by half, indicating the possibility of higher areal densities. Moreover, contrary to continuous media, we also found that the power absorption peaks at the bottom of the bit patterned FePt when the media is illuminated from above, which is probably due to stronger coupling there between FePt and the surrounding materials.

Authors:
; ;  [1]
  1. MINT, Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States)
Publication Date:
OSTI Identifier:
22410005
Resource Type:
Journal Article
Journal Name:
Journal of Applied Physics
Additional Journal Information:
Journal Volume: 117; Journal Issue: 17; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 0021-8979
Country of Publication:
United States
Language:
English
Subject:
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; 71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; ANISOTROPY; COMPUTERIZED SIMULATION; COUPLING; CURIE POINT; DENSITY; ENERGY ABSORPTION; FINITE DIFFERENCE METHOD; INTERMETALLIC COMPOUNDS; IRON; PLATINUM; TEMPERATURE GRADIENTS

Citation Formats

Wang, Sumei, E-mail: wang3936@umn.edu, Ghoreyshi, Ali, and Victora, R. H. Feasibility of bit patterned media for HAMR at 5 Tb/in{sup 2}. United States: N. p., 2015. Web. doi:10.1063/1.4915908.
Wang, Sumei, E-mail: wang3936@umn.edu, Ghoreyshi, Ali, & Victora, R. H. Feasibility of bit patterned media for HAMR at 5 Tb/in{sup 2}. United States. doi:10.1063/1.4915908.
Wang, Sumei, E-mail: wang3936@umn.edu, Ghoreyshi, Ali, and Victora, R. H. Thu . "Feasibility of bit patterned media for HAMR at 5 Tb/in{sup 2}". United States. doi:10.1063/1.4915908.
@article{osti_22410005,
title = {Feasibility of bit patterned media for HAMR at 5 Tb/in{sup 2}},
author = {Wang, Sumei, E-mail: wang3936@umn.edu and Ghoreyshi, Ali and Victora, R. H.},
abstractNote = {We have investigated the feasibility of BPM for HAMR via Finite Difference Time Domain and atomistic simulation and we have substantiated the feasibility of 5 Tb/in{sup 2} with two filling factors 25% and 56% even when the maximum on-track bit temperature is below the Curie temperature. The success of this underheated switching is attributed to sufficiently low anisotropy instead of reduction of Curie temperature. The temperature gradient in the cross-track direction is almost doubled if the optical head width is reduced by half, indicating the possibility of higher areal densities. Moreover, contrary to continuous media, we also found that the power absorption peaks at the bottom of the bit patterned FePt when the media is illuminated from above, which is probably due to stronger coupling there between FePt and the surrounding materials.},
doi = {10.1063/1.4915908},
journal = {Journal of Applied Physics},
issn = {0021-8979},
number = 17,
volume = 117,
place = {United States},
year = {2015},
month = {5}
}