skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Highly (002) textured large grain bcc Cr{sub 80}Mn{sub 20} seed layer on Cr{sub 50}Ti{sub 50} amorphous layer for FePt-C granular film

Abstract

Effect of bcc Cr{sub 80}Mn{sub 20} seed layer and Cr{sub 50}Ti{sub 50} amorphous texture inducing layer on the heteroepitaxy system in FePt-C granular film was studied by introducing a new concept of the layered structure. The concept suggested that the large grain seed layer in which the crystallographic texture was initially formed on an amorphous layer in the layered structure can reduce the angular distribution of (002) c-axis crystal orientation in the FePt-C granular film owing to heteroepitaxial growth. Structure analysis by X-ray diffraction revealed that (1) when the substrate heating temperature was elevated from 300 °C to 500 °C, grain size in the seed layer increased from 9.8 nm to 11.6 nm, and then decreased with further increasing the substrate temperature. The reduction of the grain size over 500 °C corresponds to the crystallization of the amorphous texture inducing layer, (2) when the grain size increased from 9.8 nm to 11.6 nm, the angular distribution of the (002) orientation in the seed layer dramatically decreased from 13.7° to 4.1°. It was shown that the large grain seed layer increased the perpendicular hysteresis in FePt-C granular film.

Authors:
;  [1];  [1];  [2];  [3]
  1. Department of Electronic Engineering, Tohoku University, 6-6-05 Aoba, Aramaki, Aoba-ku, Sendai 980-8579 (Japan)
  2. (PD), 5-3-1, Kojimachi, Chiyoda-ku, Tokyo 102-0083 (Japan)
  3. New Industry Creation Hatchery Center, Tohoku University, 6-6-10 Aoba, Aramaki, Aoba-ku, Sendai 980-8579 (Japan)
Publication Date:
OSTI Identifier:
22409944
Resource Type:
Journal Article
Journal Name:
Journal of Applied Physics
Additional Journal Information:
Journal Volume: 117; Journal Issue: 17; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 0021-8979
Country of Publication:
United States
Language:
English
Subject:
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; ANGULAR DISTRIBUTION; BCC LATTICES; CHROMIUM BASE ALLOYS; CRYSTALLIZATION; CRYSTALS; FILMS; GRAIN SIZE; GRANULAR MATERIALS; HYSTERESIS; LAYERS; MANGANESE ALLOYS; ORIENTATION; SUBSTRATES; TEXTURE; TITANIUM ALLOYS; X-RAY DIFFRACTION

Citation Formats

Jeon, Seong-Jae, E-mail: jsjigst@ecei.tohoku.ac.jp, Saito, Shin, Hinata, Shintaro, Japan Society for the Promotion of Science Research Fellow, and Takahashi, Migaku. Highly (002) textured large grain bcc Cr{sub 80}Mn{sub 20} seed layer on Cr{sub 50}Ti{sub 50} amorphous layer for FePt-C granular film. United States: N. p., 2015. Web. doi:10.1063/1.4919225.
Jeon, Seong-Jae, E-mail: jsjigst@ecei.tohoku.ac.jp, Saito, Shin, Hinata, Shintaro, Japan Society for the Promotion of Science Research Fellow, & Takahashi, Migaku. Highly (002) textured large grain bcc Cr{sub 80}Mn{sub 20} seed layer on Cr{sub 50}Ti{sub 50} amorphous layer for FePt-C granular film. United States. doi:10.1063/1.4919225.
Jeon, Seong-Jae, E-mail: jsjigst@ecei.tohoku.ac.jp, Saito, Shin, Hinata, Shintaro, Japan Society for the Promotion of Science Research Fellow, and Takahashi, Migaku. Thu . "Highly (002) textured large grain bcc Cr{sub 80}Mn{sub 20} seed layer on Cr{sub 50}Ti{sub 50} amorphous layer for FePt-C granular film". United States. doi:10.1063/1.4919225.
@article{osti_22409944,
title = {Highly (002) textured large grain bcc Cr{sub 80}Mn{sub 20} seed layer on Cr{sub 50}Ti{sub 50} amorphous layer for FePt-C granular film},
author = {Jeon, Seong-Jae, E-mail: jsjigst@ecei.tohoku.ac.jp and Saito, Shin and Hinata, Shintaro and Japan Society for the Promotion of Science Research Fellow and Takahashi, Migaku},
abstractNote = {Effect of bcc Cr{sub 80}Mn{sub 20} seed layer and Cr{sub 50}Ti{sub 50} amorphous texture inducing layer on the heteroepitaxy system in FePt-C granular film was studied by introducing a new concept of the layered structure. The concept suggested that the large grain seed layer in which the crystallographic texture was initially formed on an amorphous layer in the layered structure can reduce the angular distribution of (002) c-axis crystal orientation in the FePt-C granular film owing to heteroepitaxial growth. Structure analysis by X-ray diffraction revealed that (1) when the substrate heating temperature was elevated from 300 °C to 500 °C, grain size in the seed layer increased from 9.8 nm to 11.6 nm, and then decreased with further increasing the substrate temperature. The reduction of the grain size over 500 °C corresponds to the crystallization of the amorphous texture inducing layer, (2) when the grain size increased from 9.8 nm to 11.6 nm, the angular distribution of the (002) orientation in the seed layer dramatically decreased from 13.7° to 4.1°. It was shown that the large grain seed layer increased the perpendicular hysteresis in FePt-C granular film.},
doi = {10.1063/1.4919225},
journal = {Journal of Applied Physics},
issn = {0021-8979},
number = 17,
volume = 117,
place = {United States},
year = {2015},
month = {5}
}