skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO{sub 2}) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures

Abstract

Nanoscale heterostructures composed of standing copper oxide nanowires decorated with Au nanoparticles and shells of titania and indium tin oxide were fabricated. The fabrication process involved surfactant-free and wet-chemical nucleation of gold nanoparticles on copper oxide nanowires followed by a line-of-sight sputtering of titania or indium tin oxide. The heterostructures were characterized using high resolution electron microscopy, diffraction, and energy dispersive spectroscopy. The interfaces, morphologies, crystallinity, phases, and chemical compositions were analyzed. The process of direct nucleation of gold nanoparticles on copper oxide nanoparticles resulted in low energy interface with aligned lattice for both the components. Coatings of polycrystalline titania or amorphous indium tin oxide were deposited on standing copper oxide nanowire–gold nanoparticle heterostructures. Self-shadowing effect due to standing nanowire heterostructures was observed for line-of-sight sputter deposition of titania or indium tin oxide coatings. Finally, the heterostructures were studied using Raman spectroscopy and ultraviolet–visible spectroscopy, including band gap energy analysis. Tailing in the band gap energy at longer wavelengths (or lower energies) was observed for the nanowire heterostructures. - Highlights: • Heterostructures comprised of CuO nanowires coated with Au nanoparticles. • Au nanoparticles exhibited nearly flat and low energy interface with nanowire. • Heterostructures were further sputter-coated with oxide shellmore » of TiO{sub 2} or ITO. • The process resulted in coating of polycrystalline TiO{sub 2} and amorphous ITO shell.« less

Authors:
 [1];  [1];  [2]
  1. Metallurgical and Materials Engineering, Center for Materials for Information Technology (MINT), Box 870202, The University of Alabama, Tuscaloosa, AL 35487 (United States)
  2. NSF-REH, Northridge High School, Tuscaloosa, AL 35487 (United States)
Publication Date:
OSTI Identifier:
22403563
Resource Type:
Journal Article
Journal Name:
Materials Characterization
Additional Journal Information:
Journal Volume: 96; Other Information: Copyright (c) 2014 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 1044-5803
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; 75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; CHEMICAL COMPOSITION; COPPER OXIDES; DIFFRACTION; ELECTRON MICROSCOPY; GOLD; INDIUM COMPOUNDS; INTERFACES; MORPHOLOGY; NANOPARTICLES; NANOWIRES; NUCLEATION; POLYCRYSTALS; RAMAN SPECTROSCOPY; SHADOW EFFECT; SPUTTERING; TIN OXIDES; TITANIUM OXIDES; ULTRAVIOLET RADIATION; X-RAY SPECTROSCOPY

Citation Formats

Chopra, Nitin, Department of Biological Sciences, The University of Alabama, Tuscaloosa, AL 35487, Shi, Wenwu, and Lattner, Andrew. Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO{sub 2}) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures. United States: N. p., 2014. Web. doi:10.1016/J.MATCHAR.2014.07.021.
Chopra, Nitin, Department of Biological Sciences, The University of Alabama, Tuscaloosa, AL 35487, Shi, Wenwu, & Lattner, Andrew. Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO{sub 2}) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures. United States. doi:10.1016/J.MATCHAR.2014.07.021.
Chopra, Nitin, Department of Biological Sciences, The University of Alabama, Tuscaloosa, AL 35487, Shi, Wenwu, and Lattner, Andrew. Wed . "Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO{sub 2}) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures". United States. doi:10.1016/J.MATCHAR.2014.07.021.
@article{osti_22403563,
title = {Fabrication and characterization of copper oxide (CuO)–gold (Au)–titania (TiO{sub 2}) and copper oxide (CuO)–gold (Au)–indium tin oxide (ITO) nanowire heterostructures},
author = {Chopra, Nitin and Department of Biological Sciences, The University of Alabama, Tuscaloosa, AL 35487 and Shi, Wenwu and Lattner, Andrew},
abstractNote = {Nanoscale heterostructures composed of standing copper oxide nanowires decorated with Au nanoparticles and shells of titania and indium tin oxide were fabricated. The fabrication process involved surfactant-free and wet-chemical nucleation of gold nanoparticles on copper oxide nanowires followed by a line-of-sight sputtering of titania or indium tin oxide. The heterostructures were characterized using high resolution electron microscopy, diffraction, and energy dispersive spectroscopy. The interfaces, morphologies, crystallinity, phases, and chemical compositions were analyzed. The process of direct nucleation of gold nanoparticles on copper oxide nanoparticles resulted in low energy interface with aligned lattice for both the components. Coatings of polycrystalline titania or amorphous indium tin oxide were deposited on standing copper oxide nanowire–gold nanoparticle heterostructures. Self-shadowing effect due to standing nanowire heterostructures was observed for line-of-sight sputter deposition of titania or indium tin oxide coatings. Finally, the heterostructures were studied using Raman spectroscopy and ultraviolet–visible spectroscopy, including band gap energy analysis. Tailing in the band gap energy at longer wavelengths (or lower energies) was observed for the nanowire heterostructures. - Highlights: • Heterostructures comprised of CuO nanowires coated with Au nanoparticles. • Au nanoparticles exhibited nearly flat and low energy interface with nanowire. • Heterostructures were further sputter-coated with oxide shell of TiO{sub 2} or ITO. • The process resulted in coating of polycrystalline TiO{sub 2} and amorphous ITO shell.},
doi = {10.1016/J.MATCHAR.2014.07.021},
journal = {Materials Characterization},
issn = {1044-5803},
number = ,
volume = 96,
place = {United States},
year = {2014},
month = {10}
}