skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Stress induced anisotropy in CoFeMn soft magnetic nanocomposites

Abstract

The use of processing techniques to create magnetic anisotropy in soft magnetic materials is a well-known method to control permeability and losses. In nanocomposite materials, field annealing below the Curie temperature results in uniaxial anisotropy energies up to ∼2 kJ/m{sup 3}. Higher anisotropies up to ∼10 kJ/m{sup 3} result after annealing Fe-Si compositions under stress due to residual stress in the amorphous matrix acting on body centered cubic crystals. This work describes near zero magnetostriction Co{sub 80−x−y}Fe{sub x}Mn{sub y}Nb{sub 4}B{sub 14}Si{sub 2} soft magnetic nanocomposites, where x and y < 8 at.% with close packed crystalline grains that show stress induced anisotropies up to ∼50 kJ/m{sup 3} and improved mechanical properties with respect to Fe-Si compositions. Difference patterns measured using transmission X-ray diffraction show evidence of affine strain with respect to the stress axis.

Authors:
; ;  [1];  [2]
  1. Materials Science and Engineering Department, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, Pennsylvania 15213 (United States)
  2. Functional Materials Development Division, National Energy Technology Laboratory (NETL), 626 Cochrans Mill Road, Pittsburgh, Pennsylvania 15236 (United States)
Publication Date:
OSTI Identifier:
22403032
Resource Type:
Journal Article
Journal Name:
Journal of Applied Physics
Additional Journal Information:
Journal Volume: 117; Journal Issue: 17; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 0021-8979
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; ANISOTROPY; ANNEALING; BCC LATTICES; COBALT; CRYSTALS; CURIE POINT; INTERMETALLIC COMPOUNDS; IRON; MAGNETIC MATERIALS; MAGNETOSTRICTION; MANGANESE; MECHANICAL PROPERTIES; NANOCOMPOSITES; PERMEABILITY; RESIDUAL STRESSES; STRAINS; X-RAY DIFFRACTION

Citation Formats

Leary, A. M., E-mail: leary@cmu.edu, Keylin, V., McHenry, M. E., and Ohodnicki, P. R. Stress induced anisotropy in CoFeMn soft magnetic nanocomposites. United States: N. p., 2015. Web. doi:10.1063/1.4919230.
Leary, A. M., E-mail: leary@cmu.edu, Keylin, V., McHenry, M. E., & Ohodnicki, P. R. Stress induced anisotropy in CoFeMn soft magnetic nanocomposites. United States. doi:10.1063/1.4919230.
Leary, A. M., E-mail: leary@cmu.edu, Keylin, V., McHenry, M. E., and Ohodnicki, P. R. Thu . "Stress induced anisotropy in CoFeMn soft magnetic nanocomposites". United States. doi:10.1063/1.4919230.
@article{osti_22403032,
title = {Stress induced anisotropy in CoFeMn soft magnetic nanocomposites},
author = {Leary, A. M., E-mail: leary@cmu.edu and Keylin, V. and McHenry, M. E. and Ohodnicki, P. R.},
abstractNote = {The use of processing techniques to create magnetic anisotropy in soft magnetic materials is a well-known method to control permeability and losses. In nanocomposite materials, field annealing below the Curie temperature results in uniaxial anisotropy energies up to ∼2 kJ/m{sup 3}. Higher anisotropies up to ∼10 kJ/m{sup 3} result after annealing Fe-Si compositions under stress due to residual stress in the amorphous matrix acting on body centered cubic crystals. This work describes near zero magnetostriction Co{sub 80−x−y}Fe{sub x}Mn{sub y}Nb{sub 4}B{sub 14}Si{sub 2} soft magnetic nanocomposites, where x and y < 8 at.% with close packed crystalline grains that show stress induced anisotropies up to ∼50 kJ/m{sup 3} and improved mechanical properties with respect to Fe-Si compositions. Difference patterns measured using transmission X-ray diffraction show evidence of affine strain with respect to the stress axis.},
doi = {10.1063/1.4919230},
journal = {Journal of Applied Physics},
issn = {0021-8979},
number = 17,
volume = 117,
place = {United States},
year = {2015},
month = {5}
}