skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Impact of three-dimensional geometry on the performance of isolated electron-injection infrared detectors

Abstract

We present a quantitative study of the influence of three-dimensional geometry of the isolated electron–injection detectors on their characteristics. Significant improvements in the device performance are obtained as a result of scaling the injector diameter with respect to the trapping/absorbing layer diameters. Devices with about ten times smaller injector area with respect to the trapping/absorbing layer areas show more than an order of magnitude lower dark current, as well as an order of magnitude higher optical gain compared with devices of same size injector and trapping/absorbing layer areas. Devices with 10 μm injector diameter and 30 μm trapping/absorbing layer diameter show an optical gain of ∼2000 at bias voltage of −3 V with a cutoff wavelength of 1700 nm. Analytical expressions are derived for the electron-injection detector optical gain to qualitatively explain the significance of scaling the injector with respect to the absorber.

Authors:
; ; ;  [1]
  1. Bio-Inspired Sensors and Optoelectronics Laboratory, Northwestern University, 2145 Sheridan Rd, Evanston, Illinois 60208 (United States)
Publication Date:
OSTI Identifier:
22399084
Resource Type:
Journal Article
Resource Relation:
Journal Name: Applied Physics Letters; Journal Volume: 106; Journal Issue: 2; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS; COMPARATIVE EVALUATIONS; ELECTRIC CURRENTS; ELECTRIC POTENTIAL; ELECTRON BEAM INJECTION; ELECTRONS; GAIN; LAYERS; OPTICS; PERFORMANCE; THREE-DIMENSIONAL LATTICES; TRAPPING

Citation Formats

Fathipour, Vala, Jang, Sung Jun, Nia, Iman Hassani, and Mohseni, Hooman, E-mail: hmohseni@northwestern.edu. Impact of three-dimensional geometry on the performance of isolated electron-injection infrared detectors. United States: N. p., 2015. Web. doi:10.1063/1.4905864.
Fathipour, Vala, Jang, Sung Jun, Nia, Iman Hassani, & Mohseni, Hooman, E-mail: hmohseni@northwestern.edu. Impact of three-dimensional geometry on the performance of isolated electron-injection infrared detectors. United States. doi:10.1063/1.4905864.
Fathipour, Vala, Jang, Sung Jun, Nia, Iman Hassani, and Mohseni, Hooman, E-mail: hmohseni@northwestern.edu. Mon . "Impact of three-dimensional geometry on the performance of isolated electron-injection infrared detectors". United States. doi:10.1063/1.4905864.
@article{osti_22399084,
title = {Impact of three-dimensional geometry on the performance of isolated electron-injection infrared detectors},
author = {Fathipour, Vala and Jang, Sung Jun and Nia, Iman Hassani and Mohseni, Hooman, E-mail: hmohseni@northwestern.edu},
abstractNote = {We present a quantitative study of the influence of three-dimensional geometry of the isolated electron–injection detectors on their characteristics. Significant improvements in the device performance are obtained as a result of scaling the injector diameter with respect to the trapping/absorbing layer diameters. Devices with about ten times smaller injector area with respect to the trapping/absorbing layer areas show more than an order of magnitude lower dark current, as well as an order of magnitude higher optical gain compared with devices of same size injector and trapping/absorbing layer areas. Devices with 10 μm injector diameter and 30 μm trapping/absorbing layer diameter show an optical gain of ∼2000 at bias voltage of −3 V with a cutoff wavelength of 1700 nm. Analytical expressions are derived for the electron-injection detector optical gain to qualitatively explain the significance of scaling the injector with respect to the absorber.},
doi = {10.1063/1.4905864},
journal = {Applied Physics Letters},
number = 2,
volume = 106,
place = {United States},
year = {Mon Jan 12 00:00:00 EST 2015},
month = {Mon Jan 12 00:00:00 EST 2015}
}