skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A review for identification of initiating events in event tree development process on nuclear power plants

Abstract

Initiating event is defined as any event either internal or external to the nuclear power plants (NPPs) that perturbs the steady state operation of the plant, if operating, thereby initiating an abnormal event such as transient or loss of coolant accident (LOCA) within the NPPs. These initiating events trigger sequences of events that challenge plant control and safety systems whose failure could potentially lead to core damage or large early release. Selection for initiating events consists of two steps i.e. first step, definition of possible events, such as by evaluating a comprehensive engineering, and by constructing a top level logic model. Then the second step, grouping of identified initiating event's by the safety function to be performed or combinations of systems responses. Therefore, the purpose of this paper is to discuss initiating events identification in event tree development process and to reviews other probabilistic safety assessments (PSA). The identification of initiating events also involves the past operating experience, review of other PSA, failure mode and effect analysis (FMEA), feedback from system modeling, and master logic diagram (special type of fault tree). By using the method of study for the condition of the traditional US PSA categorization in detail, could bemore » obtained the important initiating events that are categorized into LOCA, transients and external events.« less

Authors:
 [1]
  1. Center for Regulatory Assessment of Nuclear Installation and Materials, Nuclear Energy Regulatory Agency (BAPETEN), Jl. Gajah Mada 8 Jakarta 10120 (Indonesia)
Publication Date:
OSTI Identifier:
22307854
Resource Type:
Journal Article
Journal Name:
AIP Conference Proceedings
Additional Journal Information:
Journal Volume: 1615; Journal Issue: 1; Conference: ICANSE 2013: 4. international conference on advances in nuclear science and engineering, Denpasar, Bali (Indonesia), 16-19 Sep 2013; Other Information: (c) 2014 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); Journal ID: ISSN 0094-243X
Country of Publication:
United States
Language:
English
Subject:
22 GENERAL STUDIES OF NUCLEAR REACTORS; COMPUTERIZED SIMULATION; DIAGRAMS; FAULT TREE ANALYSIS; LOSS OF COOLANT; NUCLEAR POWER PLANTS; PROBABILISTIC ESTIMATION; REACTOR SAFETY; RISK ASSESSMENT; STEADY-STATE CONDITIONS; TRANSIENTS

Citation Formats

Riyadi, Eko H., E-mail: e.riyadi@bapeten.go.id. A review for identification of initiating events in event tree development process on nuclear power plants. United States: N. p., 2014. Web. doi:10.1063/1.4895877.
Riyadi, Eko H., E-mail: e.riyadi@bapeten.go.id. A review for identification of initiating events in event tree development process on nuclear power plants. United States. doi:10.1063/1.4895877.
Riyadi, Eko H., E-mail: e.riyadi@bapeten.go.id. Tue . "A review for identification of initiating events in event tree development process on nuclear power plants". United States. doi:10.1063/1.4895877.
@article{osti_22307854,
title = {A review for identification of initiating events in event tree development process on nuclear power plants},
author = {Riyadi, Eko H., E-mail: e.riyadi@bapeten.go.id},
abstractNote = {Initiating event is defined as any event either internal or external to the nuclear power plants (NPPs) that perturbs the steady state operation of the plant, if operating, thereby initiating an abnormal event such as transient or loss of coolant accident (LOCA) within the NPPs. These initiating events trigger sequences of events that challenge plant control and safety systems whose failure could potentially lead to core damage or large early release. Selection for initiating events consists of two steps i.e. first step, definition of possible events, such as by evaluating a comprehensive engineering, and by constructing a top level logic model. Then the second step, grouping of identified initiating event's by the safety function to be performed or combinations of systems responses. Therefore, the purpose of this paper is to discuss initiating events identification in event tree development process and to reviews other probabilistic safety assessments (PSA). The identification of initiating events also involves the past operating experience, review of other PSA, failure mode and effect analysis (FMEA), feedback from system modeling, and master logic diagram (special type of fault tree). By using the method of study for the condition of the traditional US PSA categorization in detail, could be obtained the important initiating events that are categorized into LOCA, transients and external events.},
doi = {10.1063/1.4895877},
journal = {AIP Conference Proceedings},
issn = {0094-243X},
number = 1,
volume = 1615,
place = {United States},
year = {2014},
month = {9}
}