Nb{sub 3}Sn superconducting magnets for electron cyclotron resonance ion sources
- Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94705 (United States)
Electron cyclotron resonance (ECR) ion sources are an essential component of heavy-ion accelerators. Over the past few decades advances in magnet technology and an improved understanding of the ECR ion source plasma physics have led to remarkable performance improvements of ECR ion sources. Currently third generation high field superconducting ECR ion sources operating at frequencies around 28 GHz are the state of the art ion injectors and several devices are either under commissioning or under design around the world. At the same time, the demand for increased intensities of highly charged heavy ions continues to grow, which makes the development of even higher performance ECR ion sources a necessity. To extend ECR ion sources to frequencies well above 28 GHz, new magnet technology will be needed in order to operate at higher field and force levels. The superconducting magnet program at LBNL has been developing high field superconducting magnets for particle accelerators based on Nb{sub 3}Sn superconducting technology for several years. At the moment, Nb{sub 3}Sn is the only practical conductor capable of operating at the 15 T field level in the relevant configurations. Recent design studies have been focused on the possibility of using Nb{sub 3}Sn in the next generation of ECR ion sources. In the past, LBNL has worked on the VENUS ECR, a 28 GHz source with solenoids and a sextupole made with NbTi operating at fields of 6-7 T. VENUS has now been operating since 2004. We present in this paper the design of a Nb{sub 3}Sn ECR ion source optimized to operate at an rf frequency of 56 GHz with conductor peak fields of 13-15 T. Because of the brittleness and strain sensitivity of Nb{sub 3}Sn, particular care is required in the design of the magnet support structure, which must be capable of providing support to the coils without overstressing the conductor. In this paper, we present the main features of the support structure, featuring an external aluminum shell pretensioned with water-pressurized bladders, and we analyze the expected coil stresses with a two-dimensional finite element mechanical model.
- OSTI ID:
- 22053660
- Journal Information:
- Review of Scientific Instruments, Vol. 81, Issue 2; Conference: ICIS 2009: 13. international conference on ion sources, Gatlinburg, TN (United States), 20-25 Sep 2009; Other Information: (c) 2010 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design of a Nb3Sn Magnet for a 4th Generation ECR Ion Source
Superconducting ECR ion source: From 24-28 GHz SECRAL to 45 GHz fourth generation ECR
Related Subjects
70 PLASMA PHYSICS AND FUSION TECHNOLOGY
75 CONDENSED MATTER PHYSICS
SUPERCONDUCTIVITY AND SUPERFLUIDITY
ALUMINIUM
BRITTLENESS
CONFIGURATION
DESIGN
ECR ION SOURCES
ELECTRON CYCLOTRON-RESONANCE
FINITE ELEMENT METHOD
HEAVY ION ACCELERATORS
NIOBIUM ALLOYS
PERFORMANCE
PLASMA
SENSITIVITY
SOLENOIDS
STRAINS
STRESSES
SUPERCONDUCTING MAGNETS
TIN ALLOYS
TWO-DIMENSIONAL CALCULATIONS
WATER