Measurements of solar flux density distribution on a plane receiver due to a flat heliostat
- King Abdulaziz Univ., Jeddah (Saudi Arabia)
An experimental facility is designed and manufactured to measure the solar flux density distribution on a central flat receiver due to a single flat heliostat. The tracking mechanism of the heliostat is controlled by two stepping motors, one for tilt angle control and the other for azimuth angle control. A x-y traversing mechanism is also designed and mounted on a vertical central receiver plane, where the solar flux density is to be measured. A miniature solar sensor is mounted on the platform of the traversing mechanism, where it is used to measure the solar flux density distribution on the receiver surface. The sensor is connected to a data acquisition card in a host computer. The two stepping motors of the heliostat tracking mechanism and the two stepping motors of the traversing mechanism are all connected to a controller card in the same host computer. A software `TOWER` is prepared to let the heliostat track the sun, move the platform of the traversing mechanism to the points of a preselected grid, and to measure the solar flux density distribution on the receiver plane. Measurements are carried out using rectangular flat mirrors of different dimensions at several distances from the central receiver. Two types of images were identified on the receiver plane - namely, apparent (or visible) and mirror-reflected radiation images. Comparison between measurements and a mathematical model validates the mathematical model. 13 refs., 12 figs., 1 tab.
- OSTI ID:
- 219633
- Journal Information:
- Solar Energy, Vol. 54, Issue 6; Other Information: PBD: Jun 1995
- Country of Publication:
- United States
- Language:
- English
Similar Records
Line focus solar thermal central receiver research study. Final report, April 30, 1977-March 30, 1979
Design, fabrication, and test of a heliostat for a central receiver solar thermal power plant. Project technical report, May 1974--Sep 1975