skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy

Abstract

Biaxial test methods have been used to determine, not only yield behaviour under biaxial conditions, but also the strain response. This paper examines the influence of uniaxial prestrain upon the biaxial r-value by extending the disc compression test procedure proposed by Barlat et al. The extension involved the use of digital image measurements of in-plane strains. The material examined was a 7075-O condition aluminium alloy. The results of the experimental programme indicated that the biaxial r-value is unaffected by uniaxial prestrain. When using the disc compression test, the mode of deformation and therefore the biaxial r-value were found to be very sensitive to the prevailing friction conditions.

Authors:
; ; ;  [1]
  1. Advanced Metal Forming Research Group (AMFoR), University of Ulster, Shore Road, Newtownabbey, Co. Antrim BT37 0QB, Northern Ireland (United Kingdom)
Publication Date:
OSTI Identifier:
21516723
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 1353; Journal Issue: 1; Conference: ESAFORM 2011: 14. international ESAFORM conference on material forming, Belfast, Northern Ireland (United Kingdom), 27-29 Apr 2011; Other Information: DOI: 10.1063/1.3589718; (c) 2011 American Institute of Physics
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; 75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY; ALUMINIUM ALLOYS; COMPRESSION; DEFORMATION; FRICTION; HARDENING; STRAINS; TESTING; ALLOYS

Citation Formats

Anderson, N., Brown, D., McMurray, R. J., and Leacock, A. G. The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy. United States: N. p., 2011. Web. doi:10.1063/1.3589718.
Anderson, N., Brown, D., McMurray, R. J., & Leacock, A. G. The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy. United States. doi:10.1063/1.3589718.
Anderson, N., Brown, D., McMurray, R. J., and Leacock, A. G. 2011. "The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy". United States. doi:10.1063/1.3589718.
@article{osti_21516723,
title = {The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy},
author = {Anderson, N. and Brown, D. and McMurray, R. J. and Leacock, A. G.},
abstractNote = {Biaxial test methods have been used to determine, not only yield behaviour under biaxial conditions, but also the strain response. This paper examines the influence of uniaxial prestrain upon the biaxial r-value by extending the disc compression test procedure proposed by Barlat et al. The extension involved the use of digital image measurements of in-plane strains. The material examined was a 7075-O condition aluminium alloy. The results of the experimental programme indicated that the biaxial r-value is unaffected by uniaxial prestrain. When using the disc compression test, the mode of deformation and therefore the biaxial r-value were found to be very sensitive to the prevailing friction conditions.},
doi = {10.1063/1.3589718},
journal = {AIP Conference Proceedings},
number = 1,
volume = 1353,
place = {United States},
year = 2011,
month = 5
}
  • The development of high strength levels in Al-Mg-Zn-(Cu) alloys is dependent on the decomposition of the supersaturated solid solution ([alpha][sub ss]). The equilibrium phase, [eta], and the transition phase, [eta][prime], have compositions Mg(Zn, Al, Cu)[sub 2] and the GP Zones are solute rich clusters. Several authors have presented evidence that there is another precipitate which forms between the GP Zones and [eta][prime], though there is some controversy whether it is crystallographically distinct from the matrix, [eta][prime], or an ordered GP Zone. Regardless of their structure, these particles are seldom observed and are not usually considered in the decomposition of thesemore » alloys. Most of the previous observations of these particles have been the result of involved transmission electron microscopic and X-ray scattering experiments. This report shows they may also be detected using differential scanning calorimetry (DSC). Also significant is the fact that the particles were observed in AA 7075, an important commercial alloy. Lloyd and Chaturvedi also saw indications of [eta][prime] or ordered zones using DSC, but the results reported herein are different in several important respects. DSC traces of alloys aged for various times at room temperature and 121 C have shown there is at least one phase which can form during the decomposition of aluminum alloy 7075 that is not usually stated in the decomposition reaction. The results of previous studies suggest they may be ordered GP Zones or [eta][prime].« less
  • The mechanical and microstructural properties of 7075 aluminium alloy resulting from Friction Stir Processing (FSP), into sheets of 7 mm thickness, were analysed in the present study. The sheets were processed perpendicularly to the rolling direction; the tensile mechanical properties were evaluated at room temperature in the transverse and longitudinal directions with respect to the processing one. Tensile tests were also performed at higher temperatures and different strain rates in the nugget zone, in order to analyse the superplastic properties of the recrystallized material and to observe the differences from the parent material as a function of the strong grainmore » refinement due to the Friction Stir Process. The high temperature behaviour of the material was studied, in the parallel direction, by means of tensile tests in the temperature and strain rate ranges of 150-500 deg. C and 10{sup -} {sup 2}-10{sup -} {sup 4} s{sup -} {sup 1} respectively, electron microscopy (FEGSEM) observations were carried out to investigate more closely the fracture surfaces of the specimens tested at different temperatures and strain rates.« less
  • The most critical stage in the heat treatment of high strength aluminium alloys is the rapid cooling necessary to form a supersaturated solid solution. A disadvantage of quenching is that the thermal gradients can be sufficient to cause inhomogeneous plastic deformation which in turn leads to the development of large residual stresses. Two 215 mm thick rectilinear forgings have been made from 7000 series alloys with widely different quench sensitivity to determine if solute loss in the form of precipitation during quenching can significantly affect residual stress magnitudes. The forgings were heat treated and immersion quenched using cold water tomore » produce large magnitude residual stresses. The through thickness residual stresses were measured by neutron diffraction and incremental deep hole drilling. The distribution of residual stresses was found to be similar for both alloys varying from highly triaxial and tensile in the interior, to a state of biaxial compression in the surface. The 7010 forging exhibited larger tensile stresses in the interior. The microstructural variation from surface to centre for both forgings was determined using optical and transmission electron microscopy. These observations were used to confirm the origin of the hardness variation measured through the forging thickness. When the microstructural changes were accounted for in the through thickness lattice parameter, the residual stresses in the two forgings were found to be very similar. Solute loss in the 7075 forging appeared to have no significant effect on the residual stress magnitudes when compared to 7010. - Highlights: Black-Right-Pointing-Pointer Through thickness residual stress measurements made on large Al alloy forgings. Black-Right-Pointing-Pointer Residual stress characterised using neutron diffraction and deep hole drilling. Black-Right-Pointing-Pointer Biaxial compressive surface and triaxial subsurface residual stresses. Black-Right-Pointing-Pointer Quench sensitivity of 7075 promotes significant microstructural differences to 7010. Black-Right-Pointing-Pointer When precipitation is accounted for, residual stress in both forgings are similar.« less
  • The surface topography of an 8090 aluminum alloy was studied after uniaxial or biaxial superplastic deformation, with particular reference to grain-boundary sliding (GBS) offsets, grain rotation angles, formation of striated bands (SBs) or fibers, cavity distribution, and cavity formation mechanisms. Additionally, the contribution of GBS or grain separation to the overall strain was evaluated. Striated bands were observed and are thought to be the newly exposed faces of the grains inclined to the specimen`s surface. They were formed by sliding of grains upward and downward relative to the specimen surface. Grooves and crests inside SBs were formed from the relativemore » motion of grain-boundary defects. Fibers were observed and are thought to be the further development of the SBs resulting from the formation of elongated cavities and grain separation. More cavitation was found in equibiaxially strained regions than in other regions subjected to approximately equivalent levels of strain. About 50 pct of the total strain was contributed to GBS in the uniaxial tensile-loaded specimens, as compared to about 30 pct in the biaxial-strained specimens. The effects of grain separation, grain rotation, and secondary GBS may be the reasons for the reduction of the observed strain contribution from GBS in biaxially strained specimens.« less