Fracture Behavior and Properties of Functionally Graded Fiber-Reinforced Concrete
- Department of Civil Engineering University of Illinois at Urbana-Champaign, 205 N. Mathews Ave, Urbana, IL 61801 (United States)
In concrete pavements, a single concrete mixture design is selected to resist mechanical loading without attempting to adversely affect the concrete pavement shrinkage, ride quality, or noise attenuation. An alternative approach is to design distinct layers within the concrete pavement surface which have specific functions thus achieving higher performance at a lower cost. The objective of this research was to address the structural benefits of functionally graded concrete materials (FGCM) for rigid pavements by testing and modeling the fracture behavior of different combinations of layered plain and synthetic fiber-reinforced concrete materials. Fracture parameters and the post-peak softening behavior were obtained for each FGCM beam configuration by the three point bending beam test. The peak loads and initial fracture energy between the plain, fiber-reinforced, and FGCM signified similar crack initiation. The total fracture energy indicated improvements in fracture behavior of FGCM relative to full-depth plain concrete. The fracture behavior of FGCM depended on the position of the fiber-reinforced layer relative to the starter notch. The fracture parameters of both fiber-reinforced and plain concrete were embedded into a finite element-based cohesive zone model. The model successfully captured the experimental behavior of the FGCMs and predicted the fracture behavior of proposed FGCM configurations and structures. This integrated approach (testing and modeling) demonstrates the viability of FGCM for designing layered concrete pavements system.
- OSTI ID:
- 21055261
- Journal Information:
- AIP Conference Proceedings, Vol. 973, Issue 1; Conference: M and FGM 2006: Conference on multiscale and funtionally graded materials 2006, Oahu Island, HI (United States), 15-18 Oct 2006; Other Information: DOI: 10.1063/1.2896831; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
A discrete-continuum coupled finite element modelling approach for fibre reinforced concrete
Toughness of fiber-reinforced titanium as a function of temperature: experimental results and micromechanical modeling