skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Design and Operation of an In Situ High Pressure Reaction Cell for X-Ray Absorption Spectroscopy

Abstract

The design and initial operation of an in situ catalysis reaction cell for x-ray absorption spectroscopy measurements at high pressure is described. The design is based on an x-ray transparent tube fabricated from beryllium. This forms a true plug flow reactor for catalysis studies. The reactor is coupled to a portable microprocessor-controlled versatile feed system, and incorporates on-line analysis of reaction products. XAFS data recorded during the reduction of a NiRe/carbon catalyst at 4 bar are used to illustrate the performance of the reactor.

Authors:
; ;  [1];  [2];  [3]
  1. UOP LLC, Des Plaines, IL, 60016 (United States)
  2. Argonne National Laboratory, Argonne, IL 60439 (United States)
  3. EXAFS Analysis, Bolingbrook, IL 6044 (United States)
Publication Date:
OSTI Identifier:
21054698
Resource Type:
Journal Article
Resource Relation:
Journal Name: AIP Conference Proceedings; Journal Volume: 882; Journal Issue: 1; Conference: XAFS13: 13. international conference on X-ray absorption fine structure, Stanford, CA (United States), 9-14 Jul 2006; Other Information: DOI: 10.1063/1.2644611; (c) 2007 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA)
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; ABSORPTION SPECTROSCOPY; BERYLLIUM; CARBON; CATALYSIS; CATALYSTS; FINE STRUCTURE; INTERFACES; NICKEL COMPOUNDS; PERFORMANCE; PRESSURE DEPENDENCE; RHENIUM COMPOUNDS; X-RAY SPECTRA; X-RAY SPECTROSCOPY

Citation Formats

Bare, Simon R., Mickelson, G. E., Modica, F. S., Yang, N., and Kelly, S. D. Design and Operation of an In Situ High Pressure Reaction Cell for X-Ray Absorption Spectroscopy. United States: N. p., 2007. Web. doi:10.1063/1.2644611.
Bare, Simon R., Mickelson, G. E., Modica, F. S., Yang, N., & Kelly, S. D. Design and Operation of an In Situ High Pressure Reaction Cell for X-Ray Absorption Spectroscopy. United States. doi:10.1063/1.2644611.
Bare, Simon R., Mickelson, G. E., Modica, F. S., Yang, N., and Kelly, S. D. Fri . "Design and Operation of an In Situ High Pressure Reaction Cell for X-Ray Absorption Spectroscopy". United States. doi:10.1063/1.2644611.
@article{osti_21054698,
title = {Design and Operation of an In Situ High Pressure Reaction Cell for X-Ray Absorption Spectroscopy},
author = {Bare, Simon R. and Mickelson, G. E. and Modica, F. S. and Yang, N. and Kelly, S. D.},
abstractNote = {The design and initial operation of an in situ catalysis reaction cell for x-ray absorption spectroscopy measurements at high pressure is described. The design is based on an x-ray transparent tube fabricated from beryllium. This forms a true plug flow reactor for catalysis studies. The reactor is coupled to a portable microprocessor-controlled versatile feed system, and incorporates on-line analysis of reaction products. XAFS data recorded during the reduction of a NiRe/carbon catalyst at 4 bar are used to illustrate the performance of the reactor.},
doi = {10.1063/1.2644611},
journal = {AIP Conference Proceedings},
number = 1,
volume = 882,
place = {United States},
year = {Fri Feb 02 00:00:00 EST 2007},
month = {Fri Feb 02 00:00:00 EST 2007}
}
  • X-ray absorption spectroscopy measurements of catalytic reactions have been instrumental in advancing the understanding of catalytic processes. These measurements require an in situ catalysis reaction cell with unique properties. Here we describe the design and initial operation of an in situ/operando catalysis reaction cell for transmission X-ray absorption spectroscopy measurements. The cell is designed: to be an ideal catalytic reactor with no mass transfer effects; to give the same conversion and selectivity under similar space velocities as standard laboratory micro-reactors; to be operational temperatures up to 600 {sup o}C and pressures up to 14 bar; to be X-ray transparent allowingmore » XAS measurement to be collected in transmission for all elements with Z {>=} 23 (vanadium K-edge at 5.5 keV); to measure the actual catalyst bed temperature; to not use o-ring seals, or water cooling; to be robust, compact, easy to assemble, and use, and relatively low cost to produce. The heart of the cell is fabricated from an X-ray transparent beryllium tube that forms a plug flow reactor. XAFS data recorded during the reduction of a Re/{gamma}-A{sub 2}O{sub 3} catalyst as a function of hydrogen pressure from 0.05 to 8 bar, and from a Pt-Sn/{gamma}-A{sub 2}O{sub 3} catalyst during n-heptane reforming are given as initial examples of the versatility of the reactor.« less
  • The design and initial operation of an in situ catalysis reaction cell for x-ray absorption spectroscopy measurements at high pressure is described. The design is based on an x-ray transparent tube fabricated from beryllium. This forms a true plug flow reactor for catalysis studies. The reactor is coupled to a portable microprocessor-controlled versatile feed system, and incorporates on-line analysis of reaction products. XAFS data recorded during the reduction of a NiRe/carbon catalyst at 4 bar are used to illustrate the performance of the reactor.
  • A high pressure in situ x-ray absorption spectroscopy cell with two different path lengths and path positions is presented for studying element-specifically both the liquid phase and the solid-liquid interface at pressures up to 250 bar and temperatures up to 220 deg. C. For this purpose, one x-ray path probes the bottom, while the other x-ray path penetrates through the middle of the in situ cell. The basic design of the cell resembles a 10 ml volume batch reactor, which is equipped with in- and outlet lines to dose compressed gases and liquids as well as a stirrer for goodmore » mixing. Due to the use of a polyetheretherketone inset it is also suitable for measurements under corrosive conditions. The characteristic features of the cell are illustrated using case studies from catalysis and solid state chemistry: (a) the ruthenium-catalyzed formylation of an amine in 'supercritical' carbon dioxide in the presence of hydrogen; (b) the cycloaddition of carbon dioxide to propylene oxide in the presence of a solid Zn-based catalyst, and (c) the solvothermal synthesis of MoO{sub 3} nanorods from MoO{sub 3}-2H{sub 2}O.« less
  • We present a novel in situ reaction cell for heterogeneous catalysis monitored in situ by x-ray absorption spectroscopy (XAS) and resonant inelastic x-ray scattering (RIXS). The reaction can be carried out at a total pressure up to 1 atm, a regime that has not been accessible to comparable in situ techniques and thus closes the pressure gap to many industrial standard conditions. Two alternate catalyst geometries were tested: (A) a thin film evaporated directly onto an x-ray transparent membrane with a flowing reaction gas mixture behind it or (B) a powder placed behind both the membrane and a gap ofmore » flowing reaction gas mixture. To illustrate the working principle and feasibility of our reaction cell setup we have chosen ethylene epoxidation over a silver catalyst as a test case. The evolution of incorporated oxygen species was monitored by total electron/fluorescence yield O K-XAS as well as O K-RIXS, which is a powerful method to separate contributions from inequivalent sites. We find that our method can reliably detect transient species that exist during catalytic reaction conditions that are hardly accessible using other spectroscopic methods.« less
  • No abstract prepared.