Magnetic Field Measurement System

Journal Article · Fri Jan 19 00:00:00 EST 2007 · AIP Conference Proceedings

DOI:https://doi.org/10.1063/1.2436086· OSTI ID:21052540

Kulesza, Joe; Johnson, Eric; Lyndaker, Aaron; Deyhim, Alex; Waterman, Dave; Blomqvist, K Ingvar ^[1]; Dunn, Jonathan Hunter ^[2]

---

1. Advanced Design Consulting USA, 126 Ridge Road, P.O. Box 187, Lansing, NY 14882 (United States)
2. MAX-lab, SE-221 00 Lund (Sweden)

A magnetic field measurement system was designed, built and installed at MAX Lab, Sweden for the purpose of characterizing the magnetic field produced by Insertion Devices (see Figure 1). The measurement system consists of a large granite beam roughly 2 feet square and 14 feet long that has been polished beyond laboratory grade for flatness and straightness. The granite precision coupled with the design of the carriage yielded minimum position deviations as measured at the probe tip. The Hall probe data collection and compensation technique allows exceptional resolution and range while taking data on the fly to programmable sample spacing. Additional flip coil provides field integral data.

• OSTI ID: 21052540
• Journal Information: AIP Conference Proceedings, Vol. 879, Issue 1; Conference: 9. international conference on synchrotron radiation instrumentation, Daegu (Korea, Republic of), 28 May - 2 Jun 2006; Other Information: DOI: 10.1063/1.2436086; (c) 2007 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
• Country of Publication: United States
• Language: English

Related Subjects

71 CLASSICAL AND QUANTUM MECHANICS
GENERAL PHYSICS
43 PARTICLE ACCELERATORS
ACCURACY
DESIGN
HALL EFFECT
MAGNET COILS
MAGNETIC FIELDS
MAGNETS
MEASURING METHODS
PROBES
SWEDEN