skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Microstructure design and heat treatment selection for casting alloys using the quality index

Abstract

The ductility of casting allows is usually low and it is thus important to simultaneously assess the effect of changes to the microstructure and heat treatment on both ductility and strength of the material. The use for this purpose of the quality index charts is common in the casting industry with regard to the Al-Si-Mg casting alloys A356 and A357. An analytical method of generating quality index charts for any alloy system is presented. Applications of the method are illustrated with case studies involving Al-Si-Mg, Mg-Al-Zn, and Al-Si-Cu-Mg casting alloys. The analytically determined charts indicate the limits to microstructural improvement available for each material. The possibility of using the charts to optimize the relation between mechanical performance, chemical composition, solidification conditions, and temper is discussed.

Authors:
Publication Date:
Research Org.:
Univ. of Queensland, Brisbane (AU)
OSTI Identifier:
20075695
Resource Type:
Journal Article
Resource Relation:
Journal Name: Journal of Materials Engineering and Performance; Journal Volume: 9; Journal Issue: 2; Other Information: PBD: Apr 2000
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; MICROSTRUCTURE; HEAT TREATMENTS; DUCTILITY; YIELD STRENGTH; ALUMINIUM ALLOYS; MAGNESIUM ALLOYS; SILICON ALLOYS; ZINC ALLOYS; COPPER ALLOYS; MATHEMATICAL MODELS

Citation Formats

Caceres, C.H.. Microstructure design and heat treatment selection for casting alloys using the quality index. United States: N. p., 2000. Web. doi:10.1361/105994900770346178.
Caceres, C.H.. Microstructure design and heat treatment selection for casting alloys using the quality index. United States. doi:10.1361/105994900770346178.
Caceres, C.H.. 2000. "Microstructure design and heat treatment selection for casting alloys using the quality index". United States. doi:10.1361/105994900770346178.
@article{osti_20075695,
title = {Microstructure design and heat treatment selection for casting alloys using the quality index},
author = {Caceres, C.H.},
abstractNote = {The ductility of casting allows is usually low and it is thus important to simultaneously assess the effect of changes to the microstructure and heat treatment on both ductility and strength of the material. The use for this purpose of the quality index charts is common in the casting industry with regard to the Al-Si-Mg casting alloys A356 and A357. An analytical method of generating quality index charts for any alloy system is presented. Applications of the method are illustrated with case studies involving Al-Si-Mg, Mg-Al-Zn, and Al-Si-Cu-Mg casting alloys. The analytically determined charts indicate the limits to microstructural improvement available for each material. The possibility of using the charts to optimize the relation between mechanical performance, chemical composition, solidification conditions, and temper is discussed.},
doi = {10.1361/105994900770346178},
journal = {Journal of Materials Engineering and Performance},
number = 2,
volume = 9,
place = {United States},
year = 2000,
month = 4
}