skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Removal of NO over copper supported on activated carbon prepared by electroless plating

Abstract

The effect of copper metal supported on activated carbon on the catalytic reduction of NO has been studied as a short reaction process. It was observed that the adsorption properties of the activated carbons plated with copper metal slightly decrease with an increasing in the plating time or amount of copper metal, within the range of well-developed micropores. The results of reduction show that the presence of copper metal on activated carbon remarkably promotes the NO reduction conversion with the time on stream in the presence of oxygen. But a marginal decrease in the function of plating time is observed. Meanwhile, the NO conversion is almost constant being about 100% after standing 20 h on stream at 500 C in spite of the absence of oxygen. The effects of plating time, experimental temperature, and oxygen amount in the activated carbons have been discussed concerning the NO-copper and/or NO-carbon catalytic reaction.

Authors:
; ;
Publication Date:
Research Org.:
Chungnam National Univ., Taejon (KR)
OSTI Identifier:
20013600
Resource Type:
Journal Article
Journal Name:
Journal of Colloid and Interface Science
Additional Journal Information:
Journal Volume: 217; Journal Issue: 1; Other Information: PBD: 1 Sep 1999; Journal ID: ISSN 0021-9797
Country of Publication:
United States
Language:
English
Subject:
54 ENVIRONMENTAL SCIENCES; 01 COAL, LIGNITE, AND PEAT; 02 PETROLEUM; 03 NATURAL GAS; COPPER; ACTIVATED CARBON; NITRIC OXIDE; SELECTIVE CATALYTIC REDUCTION; AIR POLLUTION CONTROL; CATALYSTS; CHEMICAL PREPARATION

Citation Formats

Park, B.J., Park, S.J., and Ryu, S.K. Removal of NO over copper supported on activated carbon prepared by electroless plating. United States: N. p., 1999. Web. doi:10.1006/jcis.1999.6357.
Park, B.J., Park, S.J., & Ryu, S.K. Removal of NO over copper supported on activated carbon prepared by electroless plating. United States. doi:10.1006/jcis.1999.6357.
Park, B.J., Park, S.J., and Ryu, S.K. Wed . "Removal of NO over copper supported on activated carbon prepared by electroless plating". United States. doi:10.1006/jcis.1999.6357.
@article{osti_20013600,
title = {Removal of NO over copper supported on activated carbon prepared by electroless plating},
author = {Park, B.J. and Park, S.J. and Ryu, S.K.},
abstractNote = {The effect of copper metal supported on activated carbon on the catalytic reduction of NO has been studied as a short reaction process. It was observed that the adsorption properties of the activated carbons plated with copper metal slightly decrease with an increasing in the plating time or amount of copper metal, within the range of well-developed micropores. The results of reduction show that the presence of copper metal on activated carbon remarkably promotes the NO reduction conversion with the time on stream in the presence of oxygen. But a marginal decrease in the function of plating time is observed. Meanwhile, the NO conversion is almost constant being about 100% after standing 20 h on stream at 500 C in spite of the absence of oxygen. The effects of plating time, experimental temperature, and oxygen amount in the activated carbons have been discussed concerning the NO-copper and/or NO-carbon catalytic reaction.},
doi = {10.1006/jcis.1999.6357},
journal = {Journal of Colloid and Interface Science},
issn = {0021-9797},
number = 1,
volume = 217,
place = {United States},
year = {1999},
month = {9}
}