skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Illinois Power's online dynamic optimization of cyclone boilers for efficiency and emissions improvement

Abstract

Illinois Power Company (IP) is a leader in implementing online dynamic optimization at its fossil-fired power stations. As part of the company's Phase II CAAA compliance plan, IP proceeded with similar online systems at its Baldwin, Wood River, Havana, and Vermilion stations for all 10 of its coal-fired units. These Operator Advisory Systems utilize the Ultramax Method{trademark} and Dynamic Optimization, known as ULTRAMAX{reg{underscore}sign}. Of particular interest are the installations on Baldwin Units 1 and 2, which are 575 MW B and W cyclone units. Throughout the power generation industry, there has been great concern about how to deal with high NO{sub x} levels and meet EPA regulations while avoiding excessive capital costs. Based on previous applications of ULTRAMAX to cyclone units, a successful control strategy was employed for optimization of the Baldwin cyclones. These empirical model structures were then integrated with Baldwin's Distributed Control System (DCS), a Westinghouse WDPF interfaced with an Oil Systems Plant Information System (PI), to provide continuous online optimization. The online optimization system meets IP's objectives of NO{sub x} reduction and concurrent improvement in boiler efficiency. IP benefits by achieving compliance with emission regulations while securing cost savings and a rapid return on investment. Implementing ULTRAMAXmore » as an integrated online solution on the Baldwin cyclone boilers, as well as Unit 3, a 595 MW ABB-CE tangential unit, assists the operator when conditions change, simplifies data collection and enables daily updating of boiler models. This continuous use of an integrated dynamic solution offers the opportunity for greater emissions control, fuel savings, and the ability to respond rapidly and flexibly to changes in operating conditions, compliance regulations and the market environment.« less

Authors:
;
Publication Date:
Research Org.:
Illinois Power Co., Havanna, IL (US)
OSTI Identifier:
20013570
Resource Type:
Conference
Resource Relation:
Conference: 1998 International Joint Power Generation Conference, Baltimore, MD (US), 08/23/1998--08/26/1998; Other Information: PBD: 1998; Related Information: In: Proceedings of the 1998 international joint power generation conference (FACT-Vol.22). Volume 1: Fuels and combustion technologies; Gas turbines; Environmental engineering; Nuclear engineering, by Gupta, A.; Natole, R.; Sanyal, A.; Veilleux, J. [eds.], 921 pages.
Country of Publication:
United States
Language:
English
Subject:
01 COAL, LIGNITE, AND PEAT; 20 FOSSIL-FUELED POWER PLANTS; FOSSIL-FUEL POWER PLANTS; CYCLONE COMBUSTORS; THERMAL EFFICIENCY; AIR POLLUTION ABATEMENT; COAL; ON-LINE MEASUREMENT SYSTEMS; NITROGEN OXIDES

Citation Formats

McVay, M., and Patterson, P.D. Illinois Power's online dynamic optimization of cyclone boilers for efficiency and emissions improvement. United States: N. p., 1998. Web.
McVay, M., & Patterson, P.D. Illinois Power's online dynamic optimization of cyclone boilers for efficiency and emissions improvement. United States.
McVay, M., and Patterson, P.D. Wed . "Illinois Power's online dynamic optimization of cyclone boilers for efficiency and emissions improvement". United States. doi:.
@article{osti_20013570,
title = {Illinois Power's online dynamic optimization of cyclone boilers for efficiency and emissions improvement},
author = {McVay, M. and Patterson, P.D.},
abstractNote = {Illinois Power Company (IP) is a leader in implementing online dynamic optimization at its fossil-fired power stations. As part of the company's Phase II CAAA compliance plan, IP proceeded with similar online systems at its Baldwin, Wood River, Havana, and Vermilion stations for all 10 of its coal-fired units. These Operator Advisory Systems utilize the Ultramax Method{trademark} and Dynamic Optimization, known as ULTRAMAX{reg{underscore}sign}. Of particular interest are the installations on Baldwin Units 1 and 2, which are 575 MW B and W cyclone units. Throughout the power generation industry, there has been great concern about how to deal with high NO{sub x} levels and meet EPA regulations while avoiding excessive capital costs. Based on previous applications of ULTRAMAX to cyclone units, a successful control strategy was employed for optimization of the Baldwin cyclones. These empirical model structures were then integrated with Baldwin's Distributed Control System (DCS), a Westinghouse WDPF interfaced with an Oil Systems Plant Information System (PI), to provide continuous online optimization. The online optimization system meets IP's objectives of NO{sub x} reduction and concurrent improvement in boiler efficiency. IP benefits by achieving compliance with emission regulations while securing cost savings and a rapid return on investment. Implementing ULTRAMAX as an integrated online solution on the Baldwin cyclone boilers, as well as Unit 3, a 595 MW ABB-CE tangential unit, assists the operator when conditions change, simplifies data collection and enables daily updating of boiler models. This continuous use of an integrated dynamic solution offers the opportunity for greater emissions control, fuel savings, and the ability to respond rapidly and flexibly to changes in operating conditions, compliance regulations and the market environment.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Wed Jul 01 00:00:00 EDT 1998},
month = {Wed Jul 01 00:00:00 EDT 1998}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share: