skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Polycrystalline silicon thin films on glass by aluminum-induced crystallization

Abstract

This work focuses on the development and characterization of device quality thin-film crystalline silicon layers directly onto low-temperature glass. The material requirements and crystallographic quality necessary for high-performance device fabrication are studied and discussed. The processing technique investigated is aluminum-induced crystallization (AIC) of sputtered amorphous silicon on Al-coated glass substrates. Electron and ion beam microscopy are employed to study the crystallization process and the structure of the continuous polycrystalline silicon layer. The formation of this layer is accompanied by the juxtaposed layers of Al and Si films exchanging places during annealing. The grain sized of the poly-Si material are many times larger than the film's thickness. Raman and thin-film X-ray diffraction measurements verify the good crystalline quality of the Si layers. The electrical properties are investigated by temperature dependent Hall effect measurements. They show that the electrical transport is governed by the properties within the crystallites rather than the grain boundaries. The specific advantages of AIC are: (1) its simplicity and industrial relevance, particularly for the processes of sputter deposition and thermal evaporation, (2) it requires only low-temperature processing at 500 C, (3) its short processing times, and (4) its ability to produce polycrystalline material with good crystallographic and electricalmore » properties. These advantages make the poly-Si material formed by AIC highly interesting and suitable for subsequent device fabrication such as for poly-Si thin-film solar cells.« less

Authors:
; ; ;
Publication Date:
Research Org.:
Univ. of New South Wales, Sydney (AU)
Sponsoring Org.:
Australian Research Council; Deutscher Akademischer Austauschdienst
OSTI Identifier:
20006079
Resource Type:
Journal Article
Journal Name:
IEEE Transactions on Electron Devices (Institute of Electrical and Electronics Engineers)
Additional Journal Information:
Journal Volume: 46; Journal Issue: 10; Other Information: PBD: Oct 1999; Journal ID: ISSN 0018-9383
Country of Publication:
United States
Language:
English
Subject:
14 SOLAR ENERGY; 36 MATERIALS SCIENCE; SILICON SOLAR CELLS; FABRICATION; CRYSTAL GROWTH; SPUTTERING; THIN FILMS

Citation Formats

Nast, O, Brehme, S, Neuhaus, D H, and Wenham, S R. Polycrystalline silicon thin films on glass by aluminum-induced crystallization. United States: N. p., 1999. Web. doi:10.1109/16.791997.
Nast, O, Brehme, S, Neuhaus, D H, & Wenham, S R. Polycrystalline silicon thin films on glass by aluminum-induced crystallization. United States. https://doi.org/10.1109/16.791997
Nast, O, Brehme, S, Neuhaus, D H, and Wenham, S R. 1999. "Polycrystalline silicon thin films on glass by aluminum-induced crystallization". United States. https://doi.org/10.1109/16.791997.
@article{osti_20006079,
title = {Polycrystalline silicon thin films on glass by aluminum-induced crystallization},
author = {Nast, O and Brehme, S and Neuhaus, D H and Wenham, S R},
abstractNote = {This work focuses on the development and characterization of device quality thin-film crystalline silicon layers directly onto low-temperature glass. The material requirements and crystallographic quality necessary for high-performance device fabrication are studied and discussed. The processing technique investigated is aluminum-induced crystallization (AIC) of sputtered amorphous silicon on Al-coated glass substrates. Electron and ion beam microscopy are employed to study the crystallization process and the structure of the continuous polycrystalline silicon layer. The formation of this layer is accompanied by the juxtaposed layers of Al and Si films exchanging places during annealing. The grain sized of the poly-Si material are many times larger than the film's thickness. Raman and thin-film X-ray diffraction measurements verify the good crystalline quality of the Si layers. The electrical properties are investigated by temperature dependent Hall effect measurements. They show that the electrical transport is governed by the properties within the crystallites rather than the grain boundaries. The specific advantages of AIC are: (1) its simplicity and industrial relevance, particularly for the processes of sputter deposition and thermal evaporation, (2) it requires only low-temperature processing at 500 C, (3) its short processing times, and (4) its ability to produce polycrystalline material with good crystallographic and electrical properties. These advantages make the poly-Si material formed by AIC highly interesting and suitable for subsequent device fabrication such as for poly-Si thin-film solar cells.},
doi = {10.1109/16.791997},
url = {https://www.osti.gov/biblio/20006079}, journal = {IEEE Transactions on Electron Devices (Institute of Electrical and Electronics Engineers)},
issn = {0018-9383},
number = 10,
volume = 46,
place = {United States},
year = {Fri Oct 01 00:00:00 EDT 1999},
month = {Fri Oct 01 00:00:00 EDT 1999}
}