Skip to main content
OSTI.GOVU.S. Department of Energy Office of Scientific and Technical Information
U.S. Department of Energy
Office of Scientific and Technical Information
 

Effects of the Selective Alkoxy Side Chain Position in Quinoxaline-Based Polymer Acceptors on the Performance of All-Polymer Solar Cells

Journal Article · · ACS Applied Materials and Interfaces
 [1];  [1];  [2];  [1];  [1];  [2];  [1]
  1. Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
  2. School of Chemical Engineering and Materials Science, Chung-Ang University (CAU), Seoul 06974, Republic of Korea
+ Show Author Affiliations

Not provided.

Research Organization:
Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Advanced Light Source (ALS)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC02-05CH11231
OSTI ID:
1981978
Journal Information:
ACS Applied Materials and Interfaces, Vol. 13, Issue 40; ISSN 1944-8244
Publisher:
American Chemical Society (ACS)
Country of Publication:
United States
Language:
English

References (69)

Polymer Acceptors Containing B←N Units for Organic Photovoltaics July 2020
All-Polymer Solar Cells: Recent Progress, Challenges, and Prospects February 2019
Recent research progress of polymer donor/polymer acceptor blend solar cells January 2016
Thermally Stable All-Polymer Solar Cells with High Tolerance on Blend Ratios March 2018
Ambient Processable and Stable All-Polymer Organic Solar Cells January 2019
Recent Advances, Design Guidelines, and Prospects of All-Polymer Solar Cells June 2019
Influence of Acceptor Type and Polymer Molecular Weight on the Mechanical Properties of Polymer Solar Cells September 2019
Comparative Study of Thermal Stability, Morphology, and Performance of All-Polymer, Fullerene–Polymer, and Ternary Blend Solar Cells Based on the Same Polymer Donor August 2017
Toward Efficient All-Polymer Solar Cells via Halogenation on Polymer Acceptors June 2020
A Universal Fluorinated Polymer Acceptor Enables All-Polymer Solar Cells with >15% Efficiency November 2020
Efficient All-Polymer Solar Cells based on a New Polymer Acceptor Achieving 10.3% Power Conversion Efficiency January 2019
Fluorinated End Group Enables High‐Performance All‐Polymer Solar Cells with Near‐Infrared Absorption and Enhanced Device Efficiency over 14% December 2020
Over 14% efficiency all-polymer solar cells enabled by a low bandgap polymer acceptor with low energy loss and efficient charge separation January 2020
Controlling Molecular Mass of Low-Band-Gap Polymer Acceptors for High-Performance All-Polymer Solar Cells May 2020
High‐Performance All‐Polymer Solar Cells: Synthesis of Polymer Acceptor by a Random Ternary Copolymerization Strategy June 2020
High-Efficiency All-Polymer Solar Cells with Poly-Small-Molecule Acceptors Having π-Extended Units with Broad Near-IR Absorption January 2021
Efficient, Thermally Stable, and Mechanically Robust All‐Polymer Solar Cells Consisting of the Same Benzodithiophene Unit‐Based Polymer Acceptor and Donor with High Molecular Compatibility December 2020
The Importance of Entanglements in Optimizing the Mechanical and Electrical Performance of All-Polymer Solar Cells June 2019
Importance of Critical Molecular Weight of Semicrystalline n-Type Polymers for Mechanically Robust, Efficient Electroactive Thin Films April 2019
Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms March 2020
A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11% January 2019
Aggregation‐Induced Multilength Scaled Morphology Enabling 11.76% Efficiency in All‐Polymer Solar Cells Using Printing Fabrication August 2019
Flexible, highly efficient all-polymer solar cells October 2015
Highly Flexible and Efficient All-Polymer Solar Cells with High-Viscosity Processing Polymer Additive toward Potential of Stretchable Devices September 2018
Improving the Photovoltaic Performance and Mechanical Stability of Flexible All-Polymer Solar Cells via Tailoring Intermolecular Interactions June 2019
Molecular packing control enables excellent performance and mechanical property of blade-cast all-polymer solar cells May 2019
Origin of the High Donor–Acceptor Composition Tolerance in Device Performance and Mechanical Robustness of All-Polymer Solar Cells November 2019
Naphthalenediimide (NDI) polymers for all-polymer photovoltaics May 2018
Efficient Tin-Free Route to a Donor–Acceptor Semiconducting Copolymer with Variable Molecular Weights June 2014
Defect-free Naphthalene Diimide Bithiophene Copolymers with Controlled Molar Mass and High Performance via Direct Arylation Polycondensation May 2015
Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells February 2019
A Narrow‐Bandgap n‐Type Polymer Semiconductor Enabling Efficient All‐Polymer Solar Cells September 2019
Constructing a Strongly Absorbing Low-Bandgap Polymer Acceptor for High-Performance All-Polymer Solar Cells September 2017
From Fullerene–Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control October 2016
Organoboron Polymer for 10% Efficiency All-Polymer Solar Cells January 2020
High‐Performance All‐Polymer Solar Cells Enabled by n‐Type Polymers with an Ultranarrow Bandgap Down to 1.28 eV June 2020
Polymer Acceptor Based on Double B←N Bridged Bipyridine (BNBP) Unit for High-Efficiency All-Polymer Solar Cells May 2016
Distannylated Bithiophene Imide: Enabling High‐Performance n‐Type Polymer Semiconductors with an Acceptor–Acceptor Backbone July 2020
Isoindigo-3,4-Difluorothiophene Polymer Acceptors Yield “All-Polymer” Bulk-Heterojunction Solar Cells with over 7 % Efficiency December 2017
Polymer Solar Cells with Diketopyrrolopyrrole Conjugated Polymers as the Electron Donor and Electron Acceptor March 2014
Incorporation of 2,6-Connected Azulene Units into the Backbone of Conjugated Polymers: Towards High-Performance Organic Optoelectronic Materials December 2017
Thieno[3,4- c ]pyrrole-4,6-dione-3,4-difluorothiophene Polymer Acceptors for Efficient All-Polymer Bulk Heterojunction Solar Cells October 2016
Aromatic‐Diimide‐Based n‐Type Conjugated Polymers for All‐Polymer Solar Cell Applications October 2018
Cyano‐Functionalized Quinoxaline‐Based Polymer Acceptors for All‐Polymer Solar Cells and Organic Transistors March 2021
Development of quinoxaline based polymers for photovoltaic applications January 2017
Recent Development of Quinoxaline Based Polymers/Small Molecules for Organic Photovoltaics July 2017
Fluorination Enhances NIR‐II Fluorescence of Polymer Dots for Quantitative Brain Tumor Imaging September 2020
Effect of side chain position and conformation of quinacridone–quinoxaline based conjugated polymers on photovoltaic properties February 2016
Molecular energy level modulation by changing the position of electron-donating side groups January 2012
Tailored side-chain architecture of benzil voltage stabilizers for enhanced dielectric strength of cross-linked polyethylene June 2014
Siloxane-Terminated Side Chain Engineering of Acceptor Polymers Leading to Over 7% Power Conversion Efficiencies in All-Polymer Solar Cells November 2017
All-Polymer Solar Cells with 9.4% Efficiency from Naphthalene Diimide-Biselenophene Copolymer Acceptor August 2018
Naphthalene Diimide-Based Terpolymers with Controlled Crystalline Properties for Producing High Electron Mobility and Optimal Blend Morphology in All-Polymer Solar Cells March 2020
Polymer Donors with Temperature-Insensitive, Strong Aggregation Properties Enabling Additive-Free, Processing Temperature-Tolerant High-Performance All-Polymer Solar Cells December 2020
Design of Cyanovinylene-Containing Polymer Acceptors with Large Dipole Moment Change for Efficient Charge Generation in High-Performance All-Polymer Solar Cells September 2017
o -Methoxy Substituents in Spiro-OMeTAD for Efficient Inorganic–Organic Hybrid Perovskite Solar Cells May 2014
Donor–acceptor type conjugated copolymers based on alternating BNBP and oligothiophene units: from electron acceptor to electron donor and from amorphous to semicrystalline January 2020
Effect of Systematically Tuning Conjugated Donor Polymer Lowest Unoccupied Molecular Orbital Levels via Cyano Substitution on Organic Photovoltaic Device Performance July 2016
Enhanced Photovoltaic Performance of Indacenodithiophene-Quinoxaline Copolymers by Side-Chain Modulation June 2014
High-Performance All-Polymer Solar Cells Via Side-Chain Engineering of the Polymer Acceptor: The Importance of the Polymer Packing Structure and the Nanoscale Blend Morphology March 2015
Trap-limited hole mobility in semiconducting poly(3-hexylthiophene) December 2004
Determining Optimal Crystallinity of Diketopyrrolopyrrole-Based Terpolymers for Highly Efficient Polymer Solar Cells and Transistors December 2014
Recombination in polymer-fullerene bulk heterojunction solar cells December 2010
Mobility Guidelines for High Fill Factor Solution-Processed Small Molecule Solar Cells July 2014
Competition between recombination and extraction of free charges determines the fill factor of organic solar cells May 2015
Device Physics of PolymerFullerene Bulk Heterojunction Solar Cells June 2007
Importance of Terminal Group Pairing of Polymer Donor and Small‐Molecule Acceptor in Optimizing Blend Morphology and Voltage Loss of High‐Performance Solar Cells April 2021
Side Chain Engineered Naphthalene Diimide-Based Terpolymer for Efficient and Mechanically Robust All-Polymer Solar Cells January 2021
Efficient Exciton Dissociation Enabled by the End Group Modification in Non-Fullerene Acceptors March 2020

Similar Records

Related Subjects

Science & Technology - Other Topics
Materials Science