Improving the Pitting Corrosion Performance of Additively Manufactured 316L Steel Via Optimized Selective Laser Melting Processing Parameters

Sopcisak, Joseph J.; Ouyang, Mingxi; Macatangay, Duane A.; Croom, Brendan P.; Montalbano, Timothy J.; Sprouster, David J.; Kelly, Robert G.; Trelewicz, Jason R.; Srinivasan, Rengaswamy; Storck, Steven M.

doi:10.1007/s11837-022-05207-1

Improving the Pitting Corrosion Performance of Additively Manufactured 316L Steel Via Optimized Selective Laser Melting Processing Parameters

Journal Article · 11 March 2022 · JOM. Journal of the Minerals, Metals & Materials Society

DOI:https://doi.org/10.1007/s11837-022-05207-1· OSTI ID:1981506

Sopcisak, Joseph J.; Ouyang, Mingxi; Macatangay, Duane A.; Croom, Brendan P.; Montalbano, Timothy J.; Sprouster, David J.; Kelly, Robert G.; Trelewicz, Jason R.; Srinivasan, Rengaswamy; Storck, Steven M.

Not provided.

Research Organization:: Brookhaven National Laboratory (BNL), Upton, NY (United States). National Synchrotron Light Source II (NSLS-II)

Sponsoring Organization:: USDOE Office of Science (SC)

DOE Contract Number:: SC0012704

OSTI ID:: 1981506

Journal Information:: JOM. Journal of the Minerals, Metals & Materials Society, Journal Name: JOM. Journal of the Minerals, Metals & Materials Society Journal Issue: 4 Vol. 74; ISSN 1047-4838

Publisher:: Springer

Country of Publication:: United States

Language:: English

References (75)

Corrosion behavior of 316L austenitic steel processed by selective laser melting, hot-isostatic pressing, and casting Geenen, K.; Röttger, A.; Theisen, W. Materials and Corrosion, Vol. 68, Issue 7 https://doi.org/10.1002/maco.201609210	journal	January 2017
Metastable pitting behaviour of austenite stainless steel under compressive residual stress Guan, Lei; Cai, Jianmin; Yang, Xiangyu Materials and Corrosion, Vol. 71, Issue 4 https://doi.org/10.1002/maco.201911304	journal	November 2019
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel Wu, Amanda S.; Brown, Donald W.; Kumar, Mukul Metallurgical and Materials Transactions A, Vol. 45, Issue 13 https://doi.org/10.1007/s11661-014-2549-x	journal	September 2014
Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel Sun, Y.; Moroz, A.; Alrbaey, K. Journal of Materials Engineering and Performance, Vol. 23, Issue 2 https://doi.org/10.1007/s11665-013-0784-8	journal	November 2013
Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting Under Different Scanning Speeds Ni, Xiaoqing; Kong, Decheng; Wu, Wenheng Journal of Materials Engineering and Performance, Vol. 27, Issue 7 https://doi.org/10.1007/s11665-018-3446-z	journal	June 2018
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel Trelewicz, Jason R.; Halada, Gary P.; Donaldson, Olivia K. JOM, Vol. 68, Issue 3 https://doi.org/10.1007/s11837-016-1822-4	journal	February 2016
Trends in Solidification Grain Size and Morphology for Additive Manufacturing of Ti-6Al-4V Gockel, Joy; Sheridan, Luke; Narra, Sneha P. JOM, Vol. 69, Issue 12 https://doi.org/10.1007/s11837-017-2601-6	journal	September 2017
The initiation of pitting corrosion at MnS inclusions Baker, M. A.; Castle, J. E. Corrosion Science, Vol. 34, Issue 4 https://doi.org/10.1016/0010-938X(93)90279-P	journal	April 1993
A Comprehensive Comparison of the Analytical and Numerical Prediction of the Thermal History and Solidification Microstructure of Inconel 718 Products Made by Laser Powder-Bed Fusion Promoppatum, Patcharapit; Yao, Shi-Chune; Pistorius, P. Chris Engineering, Vol. 3, Issue 5 https://doi.org/10.1016/J.ENG.2017.05.023	journal	October 2017
Evaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction Shintani, Takashi; Murata, Yoshinori Acta Materialia, Vol. 59, Issue 11 https://doi.org/10.1016/j.actamat.2011.03.055	journal	June 2011
Orientation-dependent evolution of the dislocation density in grain populations with different crystallographic orientations relative to the tensile axis in a polycrystalline aggregate of stainless steel Ungár, Tamás; Stoica, Alexandru D.; Tichy, Géza Acta Materialia, Vol. 66 https://doi.org/10.1016/j.actamat.2013.11.012	journal	March 2014
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing Wang, Zhuqing; Palmer, Todd A.; Beese, Allison M. Acta Materialia, Vol. 110 https://doi.org/10.1016/j.actamat.2016.03.019	journal	May 2016
Additive manufacturing of metals Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric Acta Materialia, Vol. 117 https://doi.org/10.1016/j.actamat.2016.07.019	journal	September 2016
Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting Gao, Shubo; Hu, Zhiheng; Duchamp, Martial Acta Materialia, Vol. 200 https://doi.org/10.1016/j.actamat.2020.09.015	journal	November 2020
Selective laser melting of 304L stainless steel: Role of volumetric energy density on the microstructure, texture and mechanical properties Ghayoor, Milad; Lee, Kijoon; He, Yujuan Additive Manufacturing, Vol. 32 https://doi.org/10.1016/j.addma.2019.101011	journal	March 2020
Defect structure process maps for laser powder bed fusion additive manufacturing Gordon, Jerard V.; Narra, Sneha P.; Cunningham, Ross W. Additive Manufacturing, Vol. 36 https://doi.org/10.1016/j.addma.2020.101552	journal	December 2020
Corrosion performance of additively manufactured stainless steel parts: A review Hemmasian Ettefagh, Ali; Guo, Shengmin; Raush, Jonathan Additive Manufacturing, Vol. 37 https://doi.org/10.1016/j.addma.2020.101689	journal	January 2021
Dislocation microstructure and its influence on corrosion behavior in laser additively manufactured 316L stainless steel Sprouster, David J.; Streit Cunningham, W.; Halada, Gary P. Additive Manufacturing, Vol. 47 https://doi.org/10.1016/j.addma.2021.102263	journal	November 2021
The enhancement of microstructure on the passive and pitting behaviors of selective laser melting 316L SS in simulated body fluid Man, Cheng; Dong, Chaofang; Liu, Tingting Applied Surface Science, Vol. 467-468 https://doi.org/10.1016/j.apsusc.2018.10.150	journal	February 2019
The passivity of selective laser melted 316L stainless steel Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing Applied Surface Science, Vol. 504 https://doi.org/10.1016/j.apsusc.2019.144495	journal	February 2020
Real time pit initiation studies on stainless steels: The effect of sulphide inclusions Wijesinghe, T. L. Sudesh L.; Blackwood, Daniel John Corrosion Science, Vol. 49, Issue 4 https://doi.org/10.1016/j.corsci.2006.10.025	journal	April 2007
Pitting corrosion behaviour of austenitic stainless steels – combining effects of Mn and Mo additions Pardo, A.; Merino, M. C.; Coy, A. E. Corrosion Science, Vol. 50, Issue 6 https://doi.org/10.1016/j.corsci.2008.04.005	journal	June 2008
An experimental study of crevice corrosion behaviour of 316L stainless steel in artificial seawater Cai, Baoping; Liu, Yonghong; Tian, Xiaojie Corrosion Science, Vol. 52, Issue 10 https://doi.org/10.1016/j.corsci.2010.05.040	journal	October 2010
Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion Williams, David E.; Kilburn, Matt R.; Cliff, John Corrosion Science, Vol. 52, Issue 11 https://doi.org/10.1016/j.corsci.2010.07.021	journal	November 2010
Improving the corrosion behaviour of powder metallurgical 316L alloy by prepassivation in 20% nitric acid Kargar, B. Shahabi; Moayed, M. H.; Babakhani, A. Corrosion Science, Vol. 53, Issue 1 https://doi.org/10.1016/j.corsci.2010.09.004	journal	January 2011
On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting Laleh, Majid; Hughes, Anthony E.; Xu, Wei Corrosion Science, Vol. 161 https://doi.org/10.1016/j.corsci.2019.108189	journal	December 2019
Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores Duan, Zhiwei; Man, Cheng; Dong, Chaofang Corrosion Science, Vol. 167 https://doi.org/10.1016/j.corsci.2020.108520	journal	May 2020
Heat transfer and phase transition in the selective laser melting process Li, Yingli; Zhou, Kun; Tor, Shu Beng International Journal of Heat and Mass Transfer, Vol. 108 https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.093	journal	May 2017
Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical properties Guo, Meng; Gu, Dongdong; Xi, Lixia International Journal of Refractory Metals and Hard Materials, Vol. 84 https://doi.org/10.1016/j.ijrmhm.2019.105025	journal	November 2019
Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting Saeidi, K.; Gao, X.; Lofaj, F. Journal of Alloys and Compounds, Vol. 633 https://doi.org/10.1016/j.jallcom.2015.01.249	journal	June 2015
Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel Liverani, E.; Toschi, S.; Ceschini, L. Journal of Materials Processing Technology, Vol. 249 https://doi.org/10.1016/j.jmatprotec.2017.05.042	journal	November 2017
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting Zhong, Yuan; Liu, Leifeng; Wikman, Stefan Journal of Nuclear Materials, Vol. 470 https://doi.org/10.1016/j.jnucmat.2015.12.034	journal	March 2016
An investigation of the corrosion behavior of 316L stainless steel fabricated by SLM and SPS techniques Kale, Amol B.; Kim, Byung-Kyu; Kim, Dong-Ik Materials Characterization, Vol. 163 https://doi.org/10.1016/j.matchar.2020.110204	journal	May 2020
Austenite-preferential corrosion attack in 316 austenitic stainless steel weld metals Cui, Y.; Lundin, Carl D. Materials & Design, Vol. 28, Issue 1 https://doi.org/10.1016/j.matdes.2005.05.022	journal	January 2007
Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel LeBrun, Tyler; Nakamoto, Takayuki; Horikawa, Keitaro Materials & Design, Vol. 81 https://doi.org/10.1016/j.matdes.2015.05.026	journal	September 2015
Physical-mechanical and electrochemical corrosion behaviors of additively manufactured Cr-Ni-based stainless steel formed by laser cladding Zhang, Peirong; Liu, Zhanqiang Materials & Design, Vol. 100 https://doi.org/10.1016/j.matdes.2016.03.151	journal	June 2016
Selective laser melting of stainless steel 316L with low porosity and high build rates Sun, Zhongji; Tan, Xipeng; Tor, Shu Beng Materials & Design, Vol. 104 https://doi.org/10.1016/j.matdes.2016.05.035	journal	August 2016
An evaluation of diffraction peak profile analysis (DPPA) methods to study plastically deformed metals Simm, T. H.; Withers, P. J.; Quinta da Fonseca, J. Materials & Design, Vol. 111 https://doi.org/10.1016/j.matdes.2016.08.091	journal	December 2016
Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting Kong, Decheng; Ni, Xiaoqing; Dong, Chaofang Materials & Design, Vol. 152 https://doi.org/10.1016/j.matdes.2018.04.058	journal	August 2018
The effect of sub-grain structure on intergranular corrosion of 316L stainless steel fabricated via selective laser melting Man, Cheng; Duan, Zhiwei; Cui, Zhongyu Materials Letters, Vol. 243 https://doi.org/10.1016/j.matlet.2019.02.047	journal	May 2019
Effects of process variables and size-scale on solidification microstructure in beam-based fabrication of bulky 3D structures Bontha, Srikanth; Klingbeil, Nathan W.; Kobryn, Pamela A. Materials Science and Engineering: A, Vol. 513-514 https://doi.org/10.1016/j.msea.2009.02.019	journal	July 2009
Hardened austenite steel with columnar sub-grain structure formed by laser melting Saeidi, K.; Gao, X.; Zhong, Y. Materials Science and Engineering: A, Vol. 625 https://doi.org/10.1016/j.msea.2014.12.018	journal	February 2015
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel Yadollahi, Aref; Shamsaei, Nima; Thompson, Scott M. Materials Science and Engineering: A, Vol. 644 https://doi.org/10.1016/j.msea.2015.07.056	journal	September 2015
The microstructure, mechanical properties and corrosion resistance of 316L stainless steel fabricated using laser engineered net shaping Ziętala, Michał; Durejko, Tomasz; Polański, Marek Materials Science and Engineering: A, Vol. 677 https://doi.org/10.1016/j.msea.2016.09.028	journal	November 2016
Mechanical behavior of selective laser melted 316L stainless steel Suryawanshi, Jyoti; Prashanth, K. G.; Ramamurty, U. Materials Science and Engineering: A, Vol. 696 https://doi.org/10.1016/j.msea.2017.04.058	journal	June 2017
Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties Moussaoui, K.; Rubio, W.; Mousseigne, M. Materials Science and Engineering: A, Vol. 735 https://doi.org/10.1016/j.msea.2018.08.037	journal	September 2018
Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting Larimian, Taban; Kannan, Manigandan; Grzesiak, Dariusz Materials Science and Engineering: A, Vol. 770 https://doi.org/10.1016/j.msea.2019.138455	journal	January 2020
Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials—review Sumita, M.; Hanawa, T.; Teoh, S. H. Materials Science and Engineering: C, Vol. 24, Issue 6-8 https://doi.org/10.1016/j.msec.2004.08.030	journal	December 2004
Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites Shi, Qimin; Gu, Dongdong; Xia, Mujian Optics & Laser Technology, Vol. 84 https://doi.org/10.1016/j.optlastec.2016.04.009	journal	October 2016
Anisotropy of Mechanical Properties and its Correlation with the Structure of the Stainless Steel 316L Produced by the SLM Method Deev, A. A.; Kuznetcov, P. A.; Petrov, S. N. Physics Procedia, Vol. 83 https://doi.org/10.1016/j.phpro.2016.08.081	journal	January 2016
Influence of laser scan speed on micro-segregation in selective laser melting of an iron-carbon alloy: A multi-scale simulation study Wang, Yachao; Shi, Jing Procedia Manufacturing, Vol. 26 https://doi.org/10.1016/j.promfg.2018.07.121	journal	January 2018
Structural characterization of nanoscale intermetallic precipitates in highly neutron irradiated reactor pressure vessel steels Sprouster, D. J.; Sinsheimer, J.; Dooryhee, E. Scripta Materialia, Vol. 113 https://doi.org/10.1016/j.scriptamat.2015.10.019	journal	March 2016
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel Chao, Qi; Cruz, Victor; Thomas, Sebastian Scripta Materialia, Vol. 141 https://doi.org/10.1016/j.scriptamat.2017.07.037	journal	December 2017
Why stainless steel corrodes Ryan, Mary P.; Williams, David E.; Chater, Richard J. Nature, Vol. 415, Issue 6873 https://doi.org/10.1038/415770a	journal	February 2002
Stainless-steel corrosion and MnS inclusions Meng, Q.; Frankel, G. S.; Colijn, H. O. Nature, Vol. 424, Issue 6947 https://doi.org/10.1038/424389b	journal	July 2003
Additively manufactured hierarchical stainless steels with high strength and ductility Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T. Nature Materials, Vol. 17, Issue 1 https://doi.org/10.1038/nmat5021	journal	October 2017
The metallurgy and processing science of metal additive manufacturing Sames, W. J.; List, F. A.; Pannala, S. International Materials Reviews, Vol. 61, Issue 5 https://doi.org/10.1080/09506608.2015.1116649	journal	March 2016
Is the energy density a reliable parameter for materials synthesis by selective laser melting? Prashanth, K. G.; Scudino, S.; Maity, T. Materials Research Letters, Vol. 5, Issue 6 https://doi.org/10.1080/21663831.2017.1299808	journal	March 2017
Elastic Property Maps of Austenitic Stainless Steels Vitos, L.; Korzhavyi, P. A.; Johansson, B. Physical Review Letters, Vol. 88, Issue 15 https://doi.org/10.1103/PhysRevLett.88.155501	journal	March 2002
Rietveld refinement guidelines McCusker, L. B.; Von Dreele, R. B.; Cox, D. E. Journal of Applied Crystallography, Vol. 32, Issue 1 https://doi.org/10.1107/S0021889898009856	journal	February 1999
Whole powder pattern modelling macros for TOPAS Scardi, Paolo; Azanza Ricardo, Cristy L.; Perez-Demydenko, Camilo Journal of Applied Crystallography, Vol. 51, Issue 6 https://doi.org/10.1107/S160057671801289X	journal	October 2018
Residual stresses in selective laser sintering and selective laser melting Mercelis, Peter; Kruth, Jean‐Pierre Rapid Prototyping Journal, Vol. 12, Issue 5 https://doi.org/10.1108/13552540610707013	journal	October 2006
Power–Velocity Process Design Charts for Powder Bed Additive Manufacturing Clymer, Daniel R.; Cagan, Jonathan; Beuth, Jack Journal of Mechanical Design, Vol. 139, Issue 10 https://doi.org/10.1115/1.4037302	journal	August 2017
The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L Schaller, Rebecca F.; Mishra, Ajit; Rodelas, Jeffrey M. Journal of The Electrochemical Society, Vol. 165, Issue 5 https://doi.org/10.1149/2.0431805jes	journal	January 2018
Pit Propagation at the Boundary between Manganese Sulfide Inclusions and Austenitic Stainless Steel 303 and the Role of Copper Lillard, R. S.; Kashfipour, M. A.; Niu, W. Journal of The Electrochemical Society, Vol. 163, Issue 8 https://doi.org/10.1149/2.0461608jes	journal	January 2016
On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting Sander, G.; Thomas, S.; Cruz, V. Journal of The Electrochemical Society, Vol. 164, Issue 6 https://doi.org/10.1149/2.0551706jes	journal	January 2017
Porous Metals Shapovalov, Vladimir MRS Bulletin, Vol. 19, Issue 4 https://doi.org/10.1557/S0883769400039476	journal	April 1994
Isothermal compression of face-centered cubic iron Nishihara, Y.; Nakajima, Y.; Akashi, A. American Mineralogist, Vol. 97, Issue 8-9 https://doi.org/10.2138/am.2012.3958	journal	August 2012
Stainless Steels for Design Engineers McGuire, Michael F. https://doi.org/10.31399/asm.tb.ssde.9781627082860	book	December 2007
Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines Gokuldoss, Prashanth Konda; Kolla, Sri; Eckert, Jürgen Materials, Vol. 10, Issue 6 https://doi.org/10.3390/ma10060672	journal	June 2017
Pitting Corrosion of Very Clean Type 304 Stainless Steel Jun, Jiheon; Holguin, K.; Frankel, G. S. CORROSION, Vol. 70, Issue 2 https://doi.org/10.5006/0995	journal	February 2014
Unexpected Interface Corrosion and Sensitization Susceptibility in Additively Manufactured Austenitic Stainless Steel Macatangay, D. A.; Thomas, S.; Birbilis, N. Corrosion, Vol. 74, Issue 2 https://doi.org/10.5006/2723	journal	December 2017
Corrosion of Additively Manufactured Alloys: A Review Sander, G.; Tan, J.; Balan, P. CORROSION, Vol. 74, Issue 12 https://doi.org/10.5006/2926	journal	October 2018
Effect of Microstructural Bands on the Localized Corrosion of Laser Surface-Melted 316L Stainless Steel Hwa, Yoon; Kumai, Christopher S.; Yang, Nancy Corrosion, Vol. 77, Issue 9 https://doi.org/10.5006/3779	journal	June 2021
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control Slotwinski, John A.; Garboczi, Edward J.; Hebenstreit, Keith M. Journal of Research of the National Institute of Standards and Technology, Vol. 119 https://doi.org/10.6028/jres.119.019	journal	January 2014

Similar Records

Improving the Pitting Corrosion Performance of Additively Manufactured 316L Steel Via Optimized Selective Laser Melting Processing Parameters

Journal Article · 2022 · JOM. Journal of the Minerals, Metals & Materials Society · OSTI ID:1860311

Analysis of Pitting Corrosion on Wrought and Additively Manufactured 316L Stainless Steel.

Conference · 2022 · OSTI ID:2005477

Related Subjects

Materials Science
Metallurgy & Metallurgical Engineering
Mineralogy
Mining & Mineral Processing

Improving the Pitting Corrosion Performance of Additively Manufactured 316L Steel Via Optimized Selective Laser Melting Processing Parameters

Citation Formats

References (75)

Similar Records

Related Subjects