Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Characterizing environment-dependent fracture mechanisms of ceramic matrix composites via digital image correlation

Journal Article · · Journal of the American Ceramic Society
DOI:https://doi.org/10.1111/jace.17961· OSTI ID:1980627

Not provided.

Research Organization:
Univ. of Virginia, Charlottesville, VA (United States)
Sponsoring Organization:
USDOE Office of Nuclear Energy (NE)
DOE Contract Number:
NE0008706
OSTI ID:
1980627
Journal Information:
Journal of the American Ceramic Society, Vol. 104, Issue 12; ISSN 0002-7820
Publisher:
American Ceramic Society
Country of Publication:
United States
Language:
English

References (59)

Analysis of SiC/SiC composites for energy applications at ambient conditions September 2020
Scalable measurements of tow architecture variability in braided ceramic composite tubes April 2018
Mechanical properties of SiC/SiC braided tubes for fuel cladding October 2014
In-situ damage monitoring of a SiC/SiC ceramic matrix composite using acoustic emission and digital image correlation December 2016
Estimation of crack-tip-opening displacement and crack extension of glass fiber reinforced polymer mortars using digital image correlation method January 2012
Handbook of SiC properties for fuel performance modeling September 2007
Stress redistribution around mechanical attachments in ceramic matrix composites January 1995
Relaxation of residual microstress in reaction bonded silicon carbide July 2018
Unveiling 3D Deformations in Polymer Composites by Coupled Micro X-Ray Computed Tomography and Volumetric Digital Image Correlation February 2016
In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite December 2016
Cyclic loading of a SiC-fiber reinforced ceramic matrix composite reveals damage mechanisms and thermal residual stress state January 2013
Stress-dependent matrix cracking in 2D woven SiC-fiber reinforced melt-infiltrated SiC matrix composites July 2004
Design Guidelines for In-Plane Mechanical Properties of SiC Fiber-Reinforced Melt-Infiltrated SiC Composites March 2009
Effect of high temperature heat treatment in vacuum on microstructure and bending properties of SiCf/SiC composites prepared by CVI October 1998
Silicon carbide fiber oxidation behavior in the presence of boron nitride June 2018
Hi-NicalonTM-SSiC Fiber Oxidation and Scale Crystallization Kinetics June 2011
Rig and Engine Testing of Melt Infiltrated Ceramic Composites for Combustor and Shroud Applications June 2002
Variations in Young's modulus and intrinsic stress of LPCVD-polysilicon due to high-temperature annealing June 1995
The maturing of nuclear fuel: Past to Accident Tolerant Fuel January 2018
Stability of interfaces in hybrid EBC/TBC coatings for Si-based ceramics in corrosive environments March 2015
Unveiling hermetic failure of ceramic tubes by digital image correlation and acoustic emission October 2019
Study of optimal subset size in digital image correlation of speckle pattern images September 2007
Improved three‐dimensional image correlation for surface displacement measurement July 1996
Localized mechanical property assessment of SiC/SiC composite materials March 2015
Matrix Cracking in 3D Orthogonal Melt-Infiltrated SiC/SiC Composites with Various Z-Fiber Types: Matrix Cracking in 3D Orthogonal Melt-Infiltrated Composites December 2004
Thermophysical and Mechanical Properties of a Three-Dimensional Hi-Nicalon/SiC Composite January 2006
Anisotropic damage behavior of SiC/SiC composite tubes: Multiaxial testing and damage characterization September 2015
High-Temperature Nanoindentation of SiC/SiC Composites November 2019
Optimization of Digital Image Correlation for High-Resolution Strain Mapping of Ceramic Composites April 2012
Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading May 2007
Micro/nanomechanical characterization of ceramic films for microdevices February 1999
Research and Development Methodology for Practical Use of Accident Tolerant Fuel in Light Water Reactors February 2016
Characterization of SiC/SiC composites damage mechanisms using Digital Image Correlation at the tow scale January 2015
Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview February 2004
A Review of SiC Fiber Oxidation with a New Study of Hi-Nicalon SiC Fiber Oxidation : A Review of SiC Fiber Oxidation… June 2016
Optimized digital speckle patterns for digital image correlation by consideration of both accuracy and efficiency January 2018
Characterization of SiC–SiC composites for accident tolerant fuel cladding November 2015
Optimization of a three-dimensional digital image correlation system for deformation measurements in extreme environments January 2012
Effects of non-uniform strains on tensile fracture of fiber-reinforced ceramic composites December 2012
Quantifying the three-dimensional damage and stress redistribution mechanisms of braided SiC/SiC composites by in situ volumetric digital image correlation March 2017
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments June 1992
Crack opening behavior in ceramic matrix composites June 2017
Issue Update to LWR SiC/SiC Cladding Handbook of Properties August 2018
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology January 2004
Application of Weakest-Link Fracture Statistics to Fiber-Reinforced Ceramic-Matrix Composites June 1997
Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System September 1980
The Effect of Heat Treatment on the Properties of SiC f /SiC Composites Prepared with Different SiC Fibers November 2018
Delayed failure of ceramic matrix composites in tension at elevated temperatures June 2005
High-temperature cyclic fatigue-crack growth behavior in an in situ toughened silicon carbide February 2000
Load-rate dependency of ultimate tensile strength in ceramic matrix composites at elevated temperatures May 2005
Mechanical properties and real-time damage evaluations of environmental barrier coated SiC/SiC CMCs subjected to tensile loading under thermal gradients December 2015
Fabrication of SiC–SiC composites for fuel cladding in advanced reactor designs May 2012
Design, Manufacture, and Characterization of a Carbon Fiber-Reinforced Silicon Carbide Nozzle Extension October 2015
Four-point bending tests for the fracture properties of concrete April 2019
Characterizing Weave Geometry in Textile Ceramic Composites Using Digital Image Correlation July 2013
In-Plane Cracking Behavior and Ultimate Strength for 2D Woven and Braided Melt-Infiltrated SiC/SiC Composites Tensile Loaded in Off-Axis Fiber Directions October 2007
Full-Field Deformation Measurement and Crack Mapping on Confined Masonry Walls Using Digital Image Correlation June 2014
A method to determine fracture toughness using cube-corner indentation February 2010
Structural materials challenges for advanced reactor systems March 2009