Improved additive manufacturing of silicon carbide parts via pressureless electric field-assisted sintering

Bratten, Adam; Chen, Ruoyu; Rittenhouse, Joshua; Leu, Ming; Wen, Haiming

doi:10.1111/ijac.14105

Title: Improved additive manufacturing of silicon carbide parts via pressureless electric field-assisted sintering

Journal Article · 21 June 2022 · International Journal of Applied Ceramic Technology

DOI:https://doi.org/10.1111/ijac.14105· OSTI ID:1980624

^[1];

^[2];

^[1]; Leu, Ming ^[3]; Wen, Haiming ^[4]

Department of Materials Science and Engineering Missouri University of Science and Technology Rolla Missouri USA
Department of Materials Science and Engineering Missouri University of Science and Technology Rolla Missouri USA; Department of Materials Science and Technology Nanjing University of Aeronautics and Astronautics Nanjing China
Department of Mechanical and Aerospace Engineering Missouri University of Science and Technology Rolla Missouri USA
Department of Materials Science and Engineering Missouri University of Science and Technology Rolla Missouri USA; Department of Nuclear Engineering and Radiation Science Missouri University of Science and Technology Rolla Missouri USA

Not provided.

Cite

Export

Save

Research Organization:: Univ. of Missouri, Columbia, MO (United States)

Sponsoring Organization:: USDOE Office of Nuclear Energy (NE)

DOE Contract Number:: NE0008753

OSTI ID:: 1980624

Journal Information:: International Journal of Applied Ceramic Technology, Vol. 19, Issue 5; ISSN 1546-542X

Publisher:: Wiley

Country of Publication:: United States

Language:: English

References (35)

Extrusion-based additive manufacturing of ZrO2 using photoinitiated polymerization Faes, M.; Vleugels, J.; Vogeler, F. CIRP Journal of Manufacturing Science and Technology, Vol. 14 https://doi.org/10.1016/j.cirpj.2016.05.002	journal	August 2016
Potentials of the “Direct inkjet printing” method for manufacturing 3Y-TZP based dental restorations Özkol, Emre; Zhang, Wen; Ebert, Jörg Journal of the European Ceramic Society, Vol. 32, Issue 10 https://doi.org/10.1016/j.jeurceramsoc.2012.03.006	journal	August 2012
Handbook of SiC properties for fuel performance modeling Snead, Lance L.; Nozawa, Takashi; Katoh, Yutai Journal of Nuclear Materials, Vol. 371, Issue 1-3 https://doi.org/10.1016/j.jnucmat.2007.05.016	journal	September 2007
The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: A review khodaei, Mahdi; yaghobizadeh, Omid; Naghavi Alhosseini, S. Hojat Journal of the European Ceramic Society, Vol. 39, Issue 7 https://doi.org/10.1016/j.jeurceramsoc.2019.02.042	journal	July 2019
Pressureless sintering of silicon carbide ceramics containing zirconium diboride Yang, Hui; Zhang, Lingjie; Guo, Xingzhong Ceramics International, Vol. 37, Issue 6 https://doi.org/10.1016/j.ceramint.2011.01.048	journal	August 2011
Progress and challenges towards additive manufacturing of SiC ceramic He, Rujie; Zhou, Niping; Zhang, Keqiang Journal of Advanced Ceramics, Vol. 10, Issue 4 https://doi.org/10.1007/s40145-021-0484-z	journal	July 2021
Fabrication of YBa2Cu3O7−x (YBCO) superconductor bulk structures by extrusion freeforming Wei, Xiangxia; Nagarajan, Ragavendran Sundaram; Peng, Erwin Ceramics International, Vol. 42, Issue 14 https://doi.org/10.1016/j.ceramint.2016.07.052	journal	November 2016
A diffraction approach for the study of the mechanism of 3C to 6H transformation in SiC Kabra, V. K.; Pandey, Dhananjai; Lele, Shrikant Journal of Materials Science, Vol. 21, Issue 5 https://doi.org/10.1007/BF01114722	journal	May 1986
Investigation of the effect of Al2O3–Y2O3–CaO (AYC) additives on sinterability, microstructure and mechanical properties of SiC matrix composites: A review Khodaei, Mahdi; Yaghobizadeh, Omid; Shahraki, Alireza Alipour International Journal of Refractory Metals and Hard Materials, Vol. 78 https://doi.org/10.1016/j.ijrmhm.2018.08.008	journal	January 2019
Micro-fabrication of ceramics: Additive manufacturing and conventional technologies Hassanin, Hany; Essa, Khamis; Elshaer, Amr Journal of Advanced Ceramics, Vol. 10, Issue 1 https://doi.org/10.1007/s40145-020-0422-5	journal	January 2021
Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration Fleisher, A.; Zolotaryov, D.; Kovalevsky, A. Ceramics International, Vol. 45, Issue 14 https://doi.org/10.1016/j.ceramint.2019.06.021	journal	October 2019
Additive Manufacturing of Ceramic-Based Materials: Additive Manufacturing of Ceramic-Based Materials Travitzky, Nahum; Bonet, Alexander; Dermeik, Benjamin Advanced Engineering Materials, Vol. 16, Issue 6 https://doi.org/10.1002/adem.201400097	journal	April 2014
Liquid phase formation in the system SiC, Al2O3, Y2O3 Neher, R.; Herrmann, M.; Brandt, K. Journal of the European Ceramic Society, Vol. 31, Issue 1-2 https://doi.org/10.1016/j.jeurceramsoc.2010.09.002	journal	January 2011
Additive manufacturing of silicon carbide for nuclear applications Koyanagi, Takaaki; Terrani, Kurt; Harrison, Shay Journal of Nuclear Materials, Vol. 543 https://doi.org/10.1016/j.jnucmat.2020.152577	journal	January 2021
Fabrication of Silicon Carbide Fiber-Reinforced Silicon Carbide Matrix Composites Using Binder Jetting Additive Manufacturing from Irregularly-Shaped and Spherical Powders Polozov, Igor; Razumov, Nikolay; Masaylo, Dmitriy Materials, Vol. 13, Issue 7 https://doi.org/10.3390/ma13071766	journal	April 2020
Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting Cai, Kunpeng; Román-Manso, Benito; Smay, Jim E. Journal of the American Ceramic Society, Vol. 95, Issue 8 https://doi.org/10.1111/j.1551-2916.2012.05276.x	journal	June 2012
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities Zocca, Andrea; Colombo, Paolo; Gomes, Cynthia M. Journal of the American Ceramic Society, Vol. 98, Issue 7 https://doi.org/10.1111/jace.13700	journal	July 2015
Phase transformations, habit changes and crystal growth in SiC Bootsma, G. A.; Knippenberg, W. F.; Verspui, G. Journal of Crystal Growth, Vol. 8, Issue 4 https://doi.org/10.1016/0022-0248(71)90263-6	journal	April 1971
Solvent-based paste extrusion solid freeforming Lu, Xuesong; Lee, Yoonjae; Yang, Shoufeng Journal of the European Ceramic Society, Vol. 30, Issue 1 https://doi.org/10.1016/j.jeurceramsoc.2009.07.019	journal	January 2010
Effect of gravity on dimensional change during sintering—I. Shrinkage anisotropy Olevsky, E. A.; German, R. M. Acta Materialia, Vol. 48, Issue 5 https://doi.org/10.1016/S1359-6454(99)00368-7	journal	March 2000
Thermal etching of SiC van der Berg, N. G.; Malherbe, Johan B.; Botha, A. J. Applied Surface Science, Vol. 258, Issue 15 https://doi.org/10.1016/j.apsusc.2011.12.132	journal	May 2012
A novel freeform extrusion fabrication process for producing solid ceramic components with uniform layered radiation drying Ghazanfari, Amir; Li, Wenbin; Leu, Ming C. Additive Manufacturing, Vol. 15 https://doi.org/10.1016/j.addma.2017.04.001	journal	May 2017
Additive manufacturing alumina components with lattice structures by digital light processing technique Zeng, Qingfeng; Yang, Changhao; Tang, Dingyi Journal of Materials Science & Technology, Vol. 35, Issue 12 https://doi.org/10.1016/j.jmst.2019.08.001	journal	December 2019
Phase Formation of the Yttrium Aluminates in the Y2O3-Al2O3-SiC System Wei, Zhenbang; Jiang, Yong; Liu, Limeng Journal of Phase Equilibria and Diffusion, Vol. 37, Issue 2 https://doi.org/10.1007/s11669-015-0435-x	journal	December 2015
Anisotropic shrinkage induced by particle rearrangement in sintering Wakai, Fumihiro; Chihara, Kentarou; Yoshida, Michiyuki Acta Materialia, Vol. 55, Issue 13 https://doi.org/10.1016/j.actamat.2007.04.027	journal	August 2007
3D printing of ceramics: A review Chen, Zhangwei; Li, Ziyong; Li, Junjie Journal of the European Ceramic Society, Vol. 39, Issue 4 https://doi.org/10.1016/j.jeurceramsoc.2018.11.013	journal	April 2019
Effect of Spark Plasma Sintering on Densification and Mechanical Properties of Silicon Carbide Tamari, Nobuyuki; Tanaka, Takahiro; Tanaka, Koji Journal of the Ceramic Society of Japan, Vol. 103, Issue 1199 https://doi.org/10.2109/jcersj.103.740	journal	January 1995
Gelcasting and pressureless sintering of silicon carbide ceramics using Al2O3–Y2O3 as the sintering additives Zhang, Jingxian; Jiang, Dongliang; Lin, Qingling Journal of the European Ceramic Society, Vol. 33, Issue 10 https://doi.org/10.1016/j.jeurceramsoc.2013.02.009	journal	September 2013
Thermodynamic analysis of dissociative volatilization of silicon carbide Yudin, B. F.; Borisov, V. G. Refractories, Vol. 8, Issue 7-8 https://doi.org/10.1007/BF01284829	journal	July 1967
3D printing of high‐purity silicon carbide Terrani, Kurt; Jolly, Brian; Trammell, Michael Journal of the American Ceramic Society, Vol. 103, Issue 3 https://doi.org/10.1111/jace.16888	journal	October 2019
Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration Wang, Wenqing; Bai, Xuejian; Zhang, Lu Ceramics International, Vol. 48, Issue 3 https://doi.org/10.1016/j.ceramint.2021.10.176	journal	February 2022
Laser additive manufacturing and homogeneous densification of complicated shape SiC ceramic parts Liu, Kai; Wu, Tian; Bourell, David L. Ceramics International, Vol. 44, Issue 17 https://doi.org/10.1016/j.ceramint.2018.08.143	journal	December 2018
Stereolithography‐based additive manufacturing of gray‐colored SiC ceramic green body Ding, Guojiao; He, Rujie; Zhang, Keqiang Journal of the American Ceramic Society, Vol. 102, Issue 12 https://doi.org/10.1111/jace.16648	journal	June 2019
The preparation of SiC-based ceramics by one novel strategy combined 3D printing technology and liquid silicon infiltration process Zhang, Heng; Yang, Yong; Liu, Bin Ceramics International, Vol. 45, Issue 8 https://doi.org/10.1016/j.ceramint.2019.02.154	journal	June 2019
Densification of additive-free polycrystalline β-SiC by spark-plasma sintering Lara, Ana; Ortiz, Angel L.; Muñoz, Antonio Ceramics International, Vol. 38, Issue 1 https://doi.org/10.1016/j.ceramint.2011.06.036	journal	January 2012

Similar Records

Field testing of pressureless sintered silicon carbide for choke trim

Journal Article · 1983 · Am. Soc. Mech. Eng., (Pap.); (United States) · OSTI ID:1980624

Regitz, A; Keene, K

The Manufacturing of High Porosity Iron with an Ultra-Fine Microstructure via Free Pressureless Spark Plasma Sintering

Journal Article · 2016 · Materials · OSTI ID:1980624

Cui, Guodong; Wei, Xialu; Olevsky, Eugene; +2 more

Processing of complex-shaped collimators made via binder jet additive manufacturing of B₄C and pressureless melt infiltration of Al

Journal Article · 2019 · Materials & Design · OSTI ID:1980624

Cramer, Corson L.; Elliott, Amy M.; Kiggans, James O.; +2 more

Related Subjects

Materials Science

Title: Improved additive manufacturing of silicon carbide parts via pressureless electric field-assisted sintering

Citation Formats

References (35)

Similar Records

Related Subjects