Skip to main content

Heterostructured stainless steel: Properties, current trends, and future perspectives

Journal Article · 01 August 2022 · Materials Science and Engineering. R, Reports

DOI:https://doi.org/10.1016/j.mser.2022.100691· OSTI ID:1977472

Romero-Resendiz, L.; El-Tahawy, M.; Zhang, T.; Rossi, M. C.; Marulanda-Cardona, D. M.; Yang, T.; Amigó-Borrás, V.; Huang, Y.; Mirzadeh, H.; Beyerlein, I. J.; Huang, J. C.; Langdon, T. G.; Zhu, Y. T.

Not provided.

Print

Research Organization:: Univ. of California, Santa Barbara, CA (United States)

Sponsoring Organization:: USDOE Office of Science (SC)

DOE Contract Number:: SC0018901

OSTI ID:: 1977472

Journal Information:: Materials Science and Engineering. R, Reports, Vol. 150, Issue C; ISSN 0927-796X

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

References (694)

Evolution of dislocation structure induced by cyclic deformation in a directionally solidified cobalt base superalloy Lu, Z.; Xu, Y. B.; Hu, Z. Q. Materials Science and Technology, Vol. 15, Issue 2 https://doi.org/10.1179/026708399101505707	journal	February 1999
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility Wu, Xiaolei; Yang, Muxin; Yuan, Fuping Proceedings of the National Academy of Sciences, Vol. 112, Issue 47 https://doi.org/10.1073/pnas.1517193112	journal	November 2015
Heterostructures: new opportunities for functional materials Zhang, Xiangyi Materials Research Letters, Vol. 8, Issue 2 https://doi.org/10.1080/21663831.2019.1691668	journal	November 2019
Heterostructured materials: superior properties from hetero-zone interaction Zhu, Yuntian; Ameyama, Kei; Anderson, Peter M. Materials Research Letters, Vol. 9, Issue 1 https://doi.org/10.1080/21663831.2020.1796836	journal	September 2020
Introduction to Heterostructured Materials: A Fast Emerging Field Zhu, Yuntian Metallurgical and Materials Transactions A, Vol. 52, Issue 11 https://doi.org/10.1007/s11661-021-06438-8	journal	September 2021
Graded Materials for Resistance to Contact Deformation and Damage Suresh, S. Science, Vol. 292, Issue 5526 https://doi.org/10.1126/science.1059716	journal	June 2001
Anisotropic mechanical behaviors and their structural dependences of crossed-lamellar structure in a bivalve shell Jiao, D.; Liu, Z. Q.; Qu, R. T. Materials Science and Engineering: C, Vol. 59 https://doi.org/10.1016/j.msec.2015.11.003	journal	February 2016
Biological and Bioinspired Composites with Spatially Tunable Heterogeneous Architectures Studart, André R. Advanced Functional Materials, Vol. 23, Issue 36 https://doi.org/10.1002/adfm.201300340	journal	May 2013
Structural Design Elements in Biological Materials: Application to Bioinspiration Naleway, Steven E.; Porter, Michael M.; McKittrick, Joanna Advanced Materials, Vol. 27, Issue 37 https://doi.org/10.1002/adma.201502403	journal	August 2015
Nature’s hierarchical materials Fratzl, Peter; Weinkamer, Richard Progress in Materials Science, Vol. 52, Issue 8 https://doi.org/10.1016/j.pmatsci.2007.06.001	journal	November 2007
Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications Liu, Zengqian; Meyers, Marc A.; Zhang, Zhefeng Progress in Materials Science, Vol. 88 https://doi.org/10.1016/j.pmatsci.2017.04.013	journal	July 2017
The key role of impurities in ancient damascus steel blades Verhoeven, J. D.; Pendray, A. H.; Dauksch, W. E. JOM, Vol. 50, Issue 9 https://doi.org/10.1007/s11837-998-0419-y	journal	September 1998
On the Bulat—Damascus steels revisited Wadsworth, Jeffrey; Sherby, Oleg D. Progress in Materials Science, Vol. 25, Issue 1 https://doi.org/10.1016/0079-6425(80)90014-6	journal	January 1980
The history of the metallographic study of the Japanese sword Notis, Michael R. Materials Characterization, Vol. 45, Issue 4-5 https://doi.org/10.1016/S1044-5803(01)00101-2	journal	October 2000
Study of Japanese sword from a viewpoint of steel strength Yaso, Muneo; Takaiwa, Toshifumi; Minagi, Yoshihiro Journal of Alloys and Compounds, Vol. 577 https://doi.org/10.1016/j.jallcom.2012.06.141	journal	November 2013
Heterogeneous materials: a new class of materials with unprecedented mechanical properties Wu, Xiaolei; Zhu, Yuntian Materials Research Letters, Vol. 5, Issue 8 https://doi.org/10.1080/21663831.2017.1343208	journal	June 2017
Back stress in strain hardening of carbon nanotube/aluminum composites Xu, Run; Fan, Genlian; Tan, Zhanqiu Materials Research Letters, Vol. 6, Issue 2 https://doi.org/10.1080/21663831.2017.1405371	journal	November 2017
Back stress strengthening and strain hardening in gradient structure Yang, Muxin; Pan, Yue; Yuan, Fuping Materials Research Letters, Vol. 4, Issue 3 https://doi.org/10.1080/21663831.2016.1153004	journal	March 2016
Perspective on hetero-deformation induced (HDI) hardening and back stress Zhu, Yuntian; Wu, Xiaolei Materials Research Letters, Vol. 7, Issue 10 https://doi.org/10.1080/21663831.2019.1616331	journal	May 2019
Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure Li, Jiansheng; Cao, Yang; Gao, Bo Journal of Materials Science, Vol. 53, Issue 14 https://doi.org/10.1007/s10853-018-2322-4	journal	April 2018
Influence of high hydrostatic pressure annealing on the recrystallization of nanostructured austenitic stainless steel Krawczynska, Agnieszka Teresa; Suchecki, Przemyslaw; Adamczyk-Cieslak, Boguslawa Materials Science and Engineering: A, Vol. 767 https://doi.org/10.1016/j.msea.2019.138381	journal	November 2019
Design for strength-ductility synergy of 316L stainless steel with heterogeneous lamella structure through medium cold rolling and annealing Li, Jiansheng; Gao, Bo; Huang, Zhaowen Vacuum, Vol. 157 https://doi.org/10.1016/j.vacuum.2018.08.049	journal	November 2018
Property enhancement in Type 316L stainless steel by spray forming Üçok, İbrahim; Ando, Teiichi; Grant, Nicholas J. Materials Science and Engineering: A, Vol. 133 https://doi.org/10.1016/0921-5093(91)90070-4	journal	March 1991
Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles Yan, F. K.; Liu, G. Z.; Tao, N. R. Acta Materialia, Vol. 60, Issue 3 https://doi.org/10.1016/j.actamat.2011.11.009	journal	February 2012
Achieving high strength and high ductility in 304 stainless steel through bi-modal microstructure prepared by post-ECAP annealing Zheng, Z. J.; Liu, J. W.; Gao, Y. Materials Science and Engineering: A, Vol. 680 https://doi.org/10.1016/j.msea.2016.11.004	journal	January 2017
Effect of temperature on the stacking fault energy and deformation behaviour in 316L austenitic stainless steel Molnár, Dávid; Sun, Xun; Lu, Song Materials Science and Engineering: A, Vol. 759 https://doi.org/10.1016/j.msea.2019.05.079	journal	June 2019
The effect of grain size on the bulk formability and tensile properties of austenitic stainless steel types 304 and 316 Ulvan, E.; Koursaris, A. Metallurgical Transactions A, Vol. 19, Issue 9 https://doi.org/10.1007/BF02645052	journal	September 1988
Mechanical Property of Duplex Stainless Steel with Nanostructured Layer by Surface Mechanical Attrition Treatment Chen, Liu; Xu, Xiao Lei Materials Science Forum, Vol. 682 https://doi.org/10.4028/www.scientific.net/MSF.682.123	journal	March 2011
Improving strength-ductility synergy in 301 stainless steel by combining gradient structure and TRIP effect He, Q.; Wang, Y. F.; Wang, M. S. Materials Science and Engineering: A, Vol. 780 https://doi.org/10.1016/j.msea.2020.139146	journal	April 2020
Gradient Microstructure Design in Stainless Steel: A Strategy for Uniting Strength-Ductility Synergy and Corrosion Resistance He, Qiong; Wei, Wei; Wang, Ming-Sai Nanomaterials, Vol. 11, Issue 9 https://doi.org/10.3390/nano11092356	journal	September 2021
Mechanical Properties of 316L Stainless Steel with Nanostructure Surface Layer Induced by Surface Mechanical Attrition Treatment Yang, Xiao Hua; Dui, Wei Zhen; Liu, Gang Key Engineering Materials, Vol. 353-358 https://doi.org/10.4028/www.scientific.net/KEM.353-358.1810	journal	September 2007
Laser aided additive manufacturing of spatially heterostructured steels Tan, Chaolin; Chew, Youxiang; Weng, Fei International Journal of Machine Tools and Manufacture, Vol. 172 https://doi.org/10.1016/j.ijmachtools.2021.103817	journal	January 2022
Comparison of strength–ductility combinations between nanotwinned austenite and martensite–austenite stainless steels Yi, H. Y.; Yan, F. K.; Tao, N. R. Materials Science and Engineering: A, Vol. 647 https://doi.org/10.1016/j.msea.2015.08.065	journal	October 2015
Work hardening behavior of nanotwinned austenitic grains in a metastable austenitic stainless steel Yi, H. Y.; Yan, F. K.; Tao, N. R. Scripta Materialia, Vol. 114 https://doi.org/10.1016/j.scriptamat.2015.12.021	journal	March 2016
Deformation mechanisms of 304L stainless steel with heterogeneous lamella structure Li, Jiansheng; Fang, Chao; Liu, Yanfang Materials Science and Engineering: A, Vol. 742 https://doi.org/10.1016/j.msea.2018.11.047	journal	January 2019
316L Austenite Stainless Steels Strengthened by Means of Nano-scale Twins Liu, G. Z.; Tao, N. R.; Lu, K. Journal of Materials Science & Technology, Vol. 26, Issue 4 https://doi.org/10.1016/S1005-0302(10)60048-5	journal	April 2010
Towards strength-ductility synergy through hierarchical microstructure design in an austenitic stainless steel Zheng, Ruixiao; Liu, Maowen; Zhang, Zhe Scripta Materialia, Vol. 169 https://doi.org/10.1016/j.scriptamat.2019.05.017	journal	August 2019
Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics Zhang, Zhe; Vajpai, Sanjay Kumar; Orlov, Dmitry Materials Science and Engineering: A, Vol. 598 https://doi.org/10.1016/j.msea.2014.01.023	journal	March 2014
Importance of Bimodal Structure Topology in the Control of Mechanical Properties of a Stainless Steel: Importance of Bimodal Structure Topology … Zhang, Zhe; Orlov, Dmitry; Vajpai, Sanjay Kumar Advanced Engineering Materials, Vol. 17, Issue 6 https://doi.org/10.1002/adem.201400358	journal	September 2014
Harmonic Structure Design of a SUS329J1 Two Phase Stainless Steel and Its Mechanical Properties Ciuca, Octav Paul; Ota, Mie; Deng, Shan MATERIALS TRANSACTIONS, Vol. 54, Issue 9 https://doi.org/10.2320/matertrans.MH201321	journal	January 2013
The role of martensitic transformation on bimodal grain structure in ultrafine grained AISI 304L stainless steel Sabooni, S.; Karimzadeh, F.; Enayati, M. H. Materials Science and Engineering: A, Vol. 636 https://doi.org/10.1016/j.msea.2015.03.101	journal	June 2015
Tensile deformation characteristics of bulk ultrafine-grained austenitic stainless steel produced by thermal cycling Ravi Kumar, B.; Raabe, Dierk Scripta Materialia, Vol. 66, Issue 9 https://doi.org/10.1016/j.scriptamat.2012.01.052	journal	May 2012
Tensile properties of spark plasma sintered AISI 316L stainless steel with unimodal and bimodal grain size distributions Flipon, B.; Keller, C.; de la Cruz, L. Garcia Materials Science and Engineering: A, Vol. 729 https://doi.org/10.1016/j.msea.2018.05.064	journal	June 2018
Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets Yanagimoto, J.; Oya, T.; Kawanishi, S. CIRP Annals, Vol. 59, Issue 1 https://doi.org/10.1016/j.cirp.2010.03.109	journal	January 2010
Gradient twinned 304 stainless steels for high strength and high ductility Chen, Aiying; Liu, Jiabin; Wang, Hongtao Materials Science and Engineering: A, Vol. 667 https://doi.org/10.1016/j.msea.2016.04.070	journal	June 2016
Surface mechanical attrition treatment of additively manufactured 316L stainless steel yields gradient nanostructure with superior strength and ductility Ghosh, Sumit; Bibhanshu, Nitish; Suwas, Satyam Materials Science and Engineering: A, Vol. 820 https://doi.org/10.1016/j.msea.2021.141540	journal	July 2021
Non-uniform phase separation in ferrite of a duplex stainless steel Zhang, B.; Xue, F.; Li, S. L. Acta Materialia, Vol. 140 https://doi.org/10.1016/j.actamat.2017.08.044	journal	November 2017
Improving the yield strength of an antibacterial 304Cu austenitic stainless steel by the reversion treatment Somani, Mahesh C.; Jaskari, Matias; Sadeghpour, Saeed Materials Science and Engineering: A, Vol. 793 https://doi.org/10.1016/j.msea.2020.139885	journal	August 2020
Effects of reversion and recrystallization on microstructure and mechanical properties of Nb-alloyed low-Ni high-Mn austenitic stainless steels Kisko, A.; Hamada, A. S.; Talonen, J. Materials Science and Engineering: A, Vol. 657 https://doi.org/10.1016/j.msea.2016.01.093	journal	March 2016
The significant role of heating rate on reverse transformation and coordinated straining behavior in a cold-rolled austenitic stainless steel Sun, G. -S.; Hu, J.; Zhang, B. Materials Science and Engineering: A, Vol. 732 https://doi.org/10.1016/j.msea.2018.07.024	journal	August 2018
Mechanical properties of copper/bronze laminates: Role of interfaces Ma, Xiaolong; Huang, Chongxiang; Moering, Jordan Acta Materialia, Vol. 116 https://doi.org/10.1016/j.actamat.2016.06.023	journal	September 2016
Bulk texture evolution of Cu–Nb nanolamellar composites during accumulative roll bonding Carpenter, J. S.; Vogel, S. C.; LeDonne, J. E. Acta Materialia, Vol. 60, Issue 4 https://doi.org/10.1016/j.actamat.2011.11.045	journal	February 2012
Design of Graded Materials by Particle Reinforcement During Accumulative Roll Bonding Schmidt, Christian W.; Ruppert, Mathis; Höppel, Heinz Werner Advanced Engineering Materials, Vol. 14, Issue 11 https://doi.org/10.1002/adem.201200046	journal	July 2012
Thermal stability of Cu–Nb nanolamellar composites fabricated via accumulative roll bonding Carpenter, J. S.; Zheng, S. J.; Zhang, R. F. Philosophical Magazine, Vol. 93, Issue 7 https://doi.org/10.1080/14786435.2012.731527	journal	March 2013
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper Fang, T. H.; Li, W. L.; Tao, N. R. Science, Vol. 331, Issue 6024 https://doi.org/10.1126/science.1200177	journal	February 2011
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures Li, Y. S.; Tao, N. R.; Lu, K. Acta Materialia, Vol. 56, Issue 2 https://doi.org/10.1016/j.actamat.2007.09.020	journal	January 2008
Effect of Gradient Nanostructures on Tribological Properties of 316L Stainless Steel with High Energy Ion Implantation Tungsten Carbide Zhao, X. H.; Nie, D. W.; Xu, D. S. Tribology Transactions, Vol. 62, Issue 2 https://doi.org/10.1080/10402004.2018.1508797	journal	January 2019
Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging Zherebtsov, S.; Kudryavtsev, E.; Kostjuchenko, S. Materials Science and Engineering: A, Vol. 536 https://doi.org/10.1016/j.msea.2011.12.102	journal	February 2012
Formation of bimodal grain structures in high purity Al by reversal high pressure torsion Orlov, Dmitry; Todaka, Yoshikazu; Umemoto, Minoru Scripta Materialia, Vol. 64, Issue 6 https://doi.org/10.1016/j.scriptamat.2010.11.020	journal	March 2011
High tensile ductility in a nanostructured metal Wang, Yinmin; Chen, Mingwei; Zhou, Fenghua Nature, Vol. 419, Issue 6910 https://doi.org/10.1038/nature01133	journal	October 2002
Effect of a duplex grain size on the tensile ductility of an ultra-fine grained Al–Mg alloy, AA5754, produced by asymmetric rolling and annealing Jin, H.; Lloyd, D. J. Scripta Materialia, Vol. 50, Issue 10 https://doi.org/10.1016/j.scriptamat.2004.02.021	journal	May 2004
Relationship between yield strength and grain size for a bimodal structural ultrafine-grained ferrite/cementite steel Zhao, Ming-Chun; Yin, Fuxing; Hanamura, Toshihiro Scripta Materialia, Vol. 57, Issue 9 https://doi.org/10.1016/j.scriptamat.2007.06.062	journal	November 2007
Structural evolutions of metallic materials processed by severe plastic deformation Cao, Yang; Ni, Song; Liao, Xiaozhou Materials Science and Engineering: R: Reports, Vol. 133 https://doi.org/10.1016/j.mser.2018.06.001	journal	November 2018
Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later Valiev, Ruslan Z.; Estrin, Yuri; Horita, Zenji JOM, Vol. 68, Issue 4 https://doi.org/10.1007/s11837-016-1820-6	journal	February 2016
Commercialization of Nanostructured Metals Produced by Severe Plastic Deformation Processing Lowe, T. C.; Zhu, Y. T. Advanced Engineering Materials, Vol. 5, Issue 5 https://doi.org/10.1002/adem.200310076	journal	May 2003
Review on superior strength and enhanced ductility of metallic nanomaterials Ovid'ko, I. A.; Valiev, R. Z.; Zhu, Y. T. Progress in Materials Science, Vol. 94 https://doi.org/10.1016/j.pmatsci.2018.02.002	journal	May 2018
The conflicts between strength and toughness Ritchie, Robert O. Nature Materials, Vol. 10, Issue 11 https://doi.org/10.1038/nmat3115	journal	October 2011
Interface affected zone for optimal strength and ductility in heterogeneous laminate Huang, C. X.; Wang, Y. F.; Ma, X. L. Materials Today, Vol. 21, Issue 7 https://doi.org/10.1016/j.mattod.2018.03.006	journal	September 2018
Making strong nanomaterials ductile with gradients Lu, K. Science, Vol. 345, Issue 6203 https://doi.org/10.1126/science.1255940	journal	September 2014
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys Li, Xiaoyan; Lu, Lei; Li, Jianguo Nature Reviews Materials, Vol. 5, Issue 9 https://doi.org/10.1038/s41578-020-0212-2	journal	July 2020
Gradient and lamellar heterostructures for superior mechanical properties Wu, Xiaolei; Zhu, Yuntian MRS Bulletin, Vol. 46, Issue 3 https://doi.org/10.1557/s43577-021-00056-w	journal	March 2021
Stress/strain gradient plasticity model for size effects in heterogeneous nano-microstructures Lyu, Hao; Hamid, Mehdi; Ruimi, Annie International Journal of Plasticity, Vol. 97 https://doi.org/10.1016/j.ijplas.2017.05.009	journal	October 2017
Alloy design strategies to increase strength and its trade-offs together Han, Seung Zeon; Choi, Eun-Ae; Lim, Sung Hwan Progress in Materials Science, Vol. 117 https://doi.org/10.1016/j.pmatsci.2020.100720	journal	April 2021
Stability and design of stainless steel structures – Review and outlook Gardner, Leroy Thin-Walled Structures, Vol. 141 https://doi.org/10.1016/j.tws.2019.04.019	journal	August 2019
Corrosion, Tribology, and Tribocorrosion Research in Biomedical Implants: Progressive Trend in the Published Literature Villanueva, J.; Trino, L.; Thomas, J. Journal of Bio- and Tribo-Corrosion, Vol. 3, Issue 1 https://doi.org/10.1007/s40735-016-0060-1	journal	October 2016
Effect of Microstructural Characteristics on Mechanical Properties of Austenitic, Ferritic, and γ-α Duplex Stainless Steels Okayasu, Mitsuhiro; Ishida, Daiki Metallurgical and Materials Transactions A, Vol. 50, Issue 3 https://doi.org/10.1007/s11661-018-5083-4	journal	January 2019
Removal of a fractured needle during inferior alveolar nerve block: two case reports You, Jae-seek; Kim, Su-Gwan; Oh, Ji-Su Journal of Dental Anesthesia and Pain Medicine, Vol. 17, Issue 3 https://doi.org/10.17245/jdapm.2017.17.3.225	journal	January 2017
Removal of a suture needle: a case report Seon, Suyun; Lee, Baek-Soo; Choi, Byung-Joon Maxillofacial Plastic and Reconstructive Surgery, Vol. 43, Issue 1 https://doi.org/10.1186/s40902-021-00309-3	journal	July 2021
Needle fracture as a complication of dental local anesthesia: recommendations for prevention and a comprehensive treatment algorithm based on literature from the past four decades Acham, Stephan; Truschnegg, Astrid; Rugani, Petra Clinical Oral Investigations, Vol. 23, Issue 3 https://doi.org/10.1007/s00784-018-2525-8	journal	June 2018
Grain size distribution effects on the corrosion behaviour of materials Gollapudi, Srikant Corrosion Science, Vol. 62 https://doi.org/10.1016/j.corsci.2012.04.040	journal	September 2012
Effect of Grain Size on Corrosion: A Review Ralston, K. D.; Birbilis, N. CORROSION, Vol. 66, Issue 7 https://doi.org/10.5006/1.3462912	journal	July 2010
Ductility and strain hardening in gradient and lamellar structured materials Wu, Xiaolei; Zhu, Yuntian; Lu, Ke Scripta Materialia, Vol. 186 https://doi.org/10.1016/j.scriptamat.2020.05.025	journal	September 2020
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress Feaugas, X. Acta Materialia, Vol. 47, Issue 13 https://doi.org/10.1016/S1359-6454(99)00222-0	journal	October 1999
In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium Mompiou, Frédéric; Caillard, Daniel; Legros, Marc Acta Materialia, Vol. 60, Issue 8 https://doi.org/10.1016/j.actamat.2012.02.049	journal	May 2012
Deformation-induced long-range internal stresses and lattice plane misorientations and the role of geometrically necessary dislocations Mughrabi, H. Philosophical Magazine, Vol. 86, Issue 25-26 https://doi.org/10.1080/14786430500509054	journal	September 2006
XLI. The equilibrium of linear arrays of dislocations. Eshelby, J. D.; Frank, F. C.; Nabarro, F. R. N. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 42, Issue 327 https://doi.org/10.1080/14786445108561060	journal	April 1951
Extra strengthening and work hardening in gradient nanotwinned metals Cheng, Zhao; Zhou, Haofei; Lu, Qiuhong Science, Vol. 362, Issue 6414 https://doi.org/10.1126/science.aau1925	journal	November 2018
Synergetic Strengthening by Gradient Structure Wu, X. L.; Jiang, P.; Chen, L. Materials Research Letters, Vol. 2, Issue 4 https://doi.org/10.1080/21663831.2014.935821	journal	July 2014
Harmonic-structured copper: performance and proof of fabrication concept based on severe plastic deformation of powders Sawangrat, Choncharoen; Kato, Shota; Orlov, Dmitry Journal of Materials Science, Vol. 49, Issue 19 https://doi.org/10.1007/s10853-014-8258-4	journal	May 2014
Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel Park, Kyosun; Nishiyama, Masato; Nakada, Nobuo Materials Science and Engineering: A, Vol. 604 https://doi.org/10.1016/j.msea.2014.02.058	journal	May 2014
Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging Calcagnotto, Marion; Adachi, Yoshitaka; Ponge, Dirk Acta Materialia, Vol. 59, Issue 2 https://doi.org/10.1016/j.actamat.2010.10.002	journal	January 2011
Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility Wu, X. L.; Yang, M. X.; Yuan, F. P. Acta Materialia, Vol. 112 https://doi.org/10.1016/j.actamat.2016.04.045	journal	June 2016
Establishment of Constitutive Relationships for Laminated Composites Considering the Variation of the Microhardness with the Strain in the Heterostructure Layers and Bonding Regions Huang, Tao; Zhan, Mei; Pei, Yanbo JOM, Vol. 71, Issue 11 https://doi.org/10.1007/s11837-019-03747-7	journal	September 2019
Bauschinger Effect and Back Stress in Gradient Cu-Ge Alloy Hu, Xianzhi; Jin, Shenbao; Zhou, Hao Metallurgical and Materials Transactions A, Vol. 48, Issue 9 https://doi.org/10.1007/s11661-017-4176-9	journal	June 2017
Extraordinary Bauschinger effect in gradient structured copper Liu, Xiaolong; Yuan, Fuping; Zhu, Yuntian Scripta Materialia, Vol. 150 https://doi.org/10.1016/j.scriptamat.2018.03.007	journal	June 2018
Residual stress provides significant strengthening and ductility in gradient structured materials Yang, Mu-Xin; Li, Run-Guang; Jiang, Ping Materials Research Letters, Vol. 7, Issue 11 https://doi.org/10.1080/21663831.2019.1635537	journal	July 2019
Back Stress Work Hardening Confirmed by Bauschinger Effect in a TRIP Steel Using Bending Tests Kato, Hiroyuki; Moat, Richard; Mori, Tsutomu ISIJ International, Vol. 54, Issue 7 https://doi.org/10.2355/isijinternational.54.1715	journal	January 2014
The Bauschinger effect in precipitation strengthened aluminum alloys Stoltz, R. E.; Pelloux, R. M. Metallurgical Transactions A, Vol. 7, Issue 9 https://doi.org/10.1007/BF02658814	journal	September 1976
Isotropic and kinematic hardening in a dispersion-strengthened aluminum alloy Reynolds, A. P.; Lyons, J. S. Metallurgical and Materials Transactions A, Vol. 28, Issue 5 https://doi.org/10.1007/s11661-997-0285-1	journal	May 1997
Strain hardening in Fe–16Mn–10Al–0.86C–5Ni high specific strength steel Yang, M. X.; Yuan, F. P.; Xie, Q. G. Acta Materialia, Vol. 109 https://doi.org/10.1016/j.actamat.2016.02.044	journal	May 2016
Dislocation dynamics simulations of the Bauschinger effect in metallic thin films Zhou, Caizhi; LeSar, Richard Computational Materials Science, Vol. 54 https://doi.org/10.1016/j.commatsci.2011.09.031	journal	March 2012
Bauschinger effect in thin metal films Xiang, Y.; Vlassak, J. J. Scripta Materialia, Vol. 53, Issue 2 https://doi.org/10.1016/j.scriptamat.2005.03.048	journal	July 2005
Bauschinger and size effects in thin-film plasticity Xiang, Y.; Vlassak, J. J. Acta Materialia, Vol. 54, Issue 20 https://doi.org/10.1016/j.actamat.2006.06.059	journal	December 2006
The bauschinger effect in copper Pedersen, O. B.; Brown, L. M.; Stobbs, W. M. Acta Metallurgica, Vol. 29, Issue 11 https://doi.org/10.1016/0001-6160(81)90110-3	journal	November 1981
A comparison of two simple methods for measuring cyclic internal and effective stresses Dickson, J. I.; Boutin, J.; Handfield, L. Materials Science and Engineering, Vol. 64, Issue 1 https://doi.org/10.1016/0025-5416(84)90083-1	journal	May 1984
Analysis of the hysteresis loops of a martensitic steel Fournier, B.; Sauzay, M.; Caës, C. Materials Science and Engineering: A, Vol. 437, Issue 2 https://doi.org/10.1016/j.msea.2006.08.086	journal	November 2006
Peak Broadening Anisotropy and the Contrast Factor in Metal Alloys Simm, Thomas Crystals, Vol. 8, Issue 5 https://doi.org/10.3390/cryst8050212	journal	May 2018
Revisiting Stacking Fault Energy of Steels Das, Arpan Metallurgical and Materials Transactions A, Vol. 47, Issue 2 https://doi.org/10.1007/s11661-015-3266-9	journal	December 2015
Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment Zhang, H. W.; Hei, Z. K.; Liu, G. Acta Materialia, Vol. 51, Issue 7 https://doi.org/10.1016/S1359-6454(02)00594-3	journal	April 2003
The composition dependence of stacking fault energy in austenitic stainless steels Rhodes, Cecil G.; Thompson, Anthony W. Metallurgical Transactions A, Vol. 8, Issue 12 https://doi.org/10.1007/BF02646563	journal	December 1977
The bauschinger effect and stacking fault energy Abel, A.; Muir, H. Philosophical Magazine, Vol. 27, Issue 3 https://doi.org/10.1080/14786437308219233	journal	March 1973
Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior Lou, Xiaoyuan; Andresen, Peter L.; Rebak, Raul B. Journal of Nuclear Materials, Vol. 499 https://doi.org/10.1016/j.jnucmat.2017.11.036	journal	February 2018
Controlling intermetallic compounds formation during laser welding of NiTi to 316L stainless steel Shamsolhodaei, A.; Oliveira, J. P.; Schell, N. Intermetallics, Vol. 116 https://doi.org/10.1016/j.intermet.2019.106656	journal	January 2020
Characterisation of Intermetallic Phases in Fusion Welded Commercially Pure Titanium and Stainless Steel 304 Pasang, Timotius; Pramana, Stevin; Kracum, Michael Metals, Vol. 8, Issue 11 https://doi.org/10.3390/met8110863	journal	October 2018
Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening Huang, J. Y.; Zhu, Y. T.; Jiang, H. Acta Materialia, Vol. 49, Issue 9 https://doi.org/10.1016/S1359-6454(01)00069-6	journal	May 2001
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging Gutierrez-Urrutia, I.; Raabe, D. Acta Materialia, Vol. 59, Issue 16 https://doi.org/10.1016/j.actamat.2011.07.009	journal	September 2011
On the origin of planar slip in f.c.c. alloys Gerold, V.; Karnthaler, H. P. Acta Metallurgica, Vol. 37, Issue 8 https://doi.org/10.1016/0001-6160(89)90143-0	journal	August 1989
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys Yang, T.; Zhao, Y. L.; Tong, Y. Science, Vol. 362, Issue 6417 https://doi.org/10.1126/science.aas8815	journal	November 2018
Stacking fault energies in austenitic stainless steels Lu, Jun; Hultman, Lars; Holmström, Erik Acta Materialia, Vol. 111 https://doi.org/10.1016/j.actamat.2016.03.042	journal	June 2016
Twinning-induced plasticity (TWIP) steels De Cooman, Bruno C.; Estrin, Yuri; Kim, Sung Kyu Acta Materialia, Vol. 142 https://doi.org/10.1016/j.actamat.2017.06.046	journal	January 2018
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys Allain, S.; Chateau, J. -P.; Bouaziz, O. Materials Science and Engineering: A, Vol. 387-389 https://doi.org/10.1016/j.msea.2004.01.059	journal	December 2004
Recent developments in stainless steels Lo, K. H.; Shek, C. H.; Lai, J. K. L. Materials Science and Engineering: R: Reports, Vol. 65, Issue 4-6 https://doi.org/10.1016/j.mser.2009.03.001	journal	May 2009
Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility Ye, Chang; Telang, Abhishek; Gill, Amrinder S. Materials Science and Engineering: A, Vol. 613 https://doi.org/10.1016/j.msea.2014.06.114	journal	September 2014
Strain hardening in gradient nano-grained Cu at 77 K Zhou, X.; Li, X. Y.; Lu, K. Scripta Materialia, Vol. 153 https://doi.org/10.1016/j.scriptamat.2018.04.039	journal	August 2018
Development of new metallic alloys for biomedical applications Niinomi, Mitsuo; Nakai, Masaaki; Hieda, Junko Acta Biomaterialia, Vol. 8, Issue 11 https://doi.org/10.1016/j.actbio.2012.06.037	journal	November 2012
Biomedical Implants: Corrosion and its Prevention - A Review Manivasagam, Geetha; Dhinasekaran, Durgalakshmi; Rajamanickam, Asokamani Recent Patents on Corrosion Science, Vol. 2, Issue 1 https://doi.org/10.2174/1877610801002010040	journal	May 2010
Effect of cold deformation on pitting corrosion of 00Cr18Mn15Mo2N0.86 stainless steel for coronary stent application Ren, Yibin; Zhao, Haochuan; Liu, Wenpeng Materials Science and Engineering: C, Vol. 60 https://doi.org/10.1016/j.msec.2015.11.048	journal	March 2016
Microstructure and corrosion resistance of stainless steel manufactured by laser melting deposition Yang, S. F.; Li, C. W.; Chen, A. Y. Journal of Manufacturing Processes, Vol. 65 https://doi.org/10.1016/j.jmapro.2021.03.051	journal	May 2021
Failure of a super duplex stainless steel reaction vessel Linton, V. M.; Laycock, N. J.; Thomsen, S. J. Engineering Failure Analysis, Vol. 11, Issue 2 https://doi.org/10.1016/j.engfailanal.2003.05.011	journal	April 2004
Failure analysis of a stainless steel pipeline Suresh Kumar, M.; Sujata, M.; Venkataswamy, M. A. Engineering Failure Analysis, Vol. 15, Issue 5 https://doi.org/10.1016/j.engfailanal.2007.05.002	journal	July 2008
Failure of stainless steel 304L air cooler tubes due to stress corrosion cracking caused by organic chlorides Ravindranath, K.; Alazemi, R. Engineering Failure Analysis, Vol. 102 https://doi.org/10.1016/j.engfailanal.2019.04.029	journal	August 2019
Failure analysis of AISI 304 stainless steel shaft Fuller, R. W.; Ehrgott, J. Q.; Heard, W. F. Engineering Failure Analysis, Vol. 15, Issue 7 https://doi.org/10.1016/j.engfailanal.2007.11.001	journal	October 2008
Properties and in-service performance of components reated with thermo reactive deposition/diffusion Marulanda, D. M.; Toro, D.; Castillejo, F. E. Ingeniare. Revista chilena de ingeniería, Vol. 26, Issue 3 https://doi.org/10.4067/S0718-33052018000300440	journal	January 2018
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment Roland, T.; Retraint, D.; Lu, K. Scripta Materialia, Vol. 54, Issue 11 https://doi.org/10.1016/j.scriptamat.2006.01.049	journal	June 2006
The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review Gupta, R. K.; Birbilis, N. Corrosion Science, Vol. 92 https://doi.org/10.1016/j.corsci.2014.11.041	journal	March 2015
Impact property of high-strength 316L stainless steel with heterostructures Li, Jiansheng; Mao, Qingzhong; Nie, Jinfeng Materials Science and Engineering: A, Vol. 754 https://doi.org/10.1016/j.msea.2019.03.105	journal	April 2019
Corrosion and biological behavior of nanostructured 316L stainless steel processed by severe plastic deformation Hajizadeh, K.; Maleki-Ghaleh, H.; Arabi, A. Surface and Interface Analysis, Vol. 47, Issue 10 https://doi.org/10.1002/sia.5806	journal	September 2015
Enhanced pitting resistance through designing a high-strength 316L stainless steel with heterostructure Li, Jiansheng; Mao, Qingzhong; Chen, Ming Journal of Materials Research and Technology, Vol. 10 https://doi.org/10.1016/j.jmrt.2020.12.005	journal	January 2021
Effects of interfaces on the helium bubble formation and radiation hardening of an austenitic stainless steel achieved by additive manufacturing Sun, Xiangyu; Chen, Feida; Huang, Hai Applied Surface Science, Vol. 467-468 https://doi.org/10.1016/j.apsusc.2018.10.268	journal	February 2019
Influence of solidification structures on radiation-induced swelling in an additively-manufactured austenitic stainless steel Meric de Bellefon, G.; Bertsch, K. M.; Chancey, M. R. Journal of Nuclear Materials, Vol. 523 https://doi.org/10.1016/j.jnucmat.2019.06.012	journal	September 2019
Hydrogen embrittlement of 3-D printing manufactured austenitic stainless steel part for hydrogen service Baek, Seung-Wook; Song, Eun Ju; Kim, Jung Hyun Scripta Materialia, Vol. 130 https://doi.org/10.1016/j.scriptamat.2016.11.020	journal	March 2017
Superior resistance to hydrogen damage for selective laser melted 316L stainless steel in a proton exchange membrane fuel cell environment Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing Corrosion Science, Vol. 166 https://doi.org/10.1016/j.corsci.2019.108425	journal	April 2020
Wear properties of functionally gradient layers on stainless steel substrates for high temperature applications Cetinel, H.; Uyulgan, B.; Tekmen, C. Surface and Coatings Technology, Vol. 174-175 https://doi.org/10.1016/S0257-8972(03)00385-2	journal	September 2003
Influence of temperature on corrosion behavior, wettability, and surface conductivity of 304 stainless steel in simulated cathode environment of proton exchange membrane fuel cells Xuan, Junji; Xu, Likun; Bai, Shuangfeng International Journal of Hydrogen Energy, Vol. 46, Issue 44 https://doi.org/10.1016/j.ijhydene.2021.04.119	journal	June 2021
A novel stainless steel with intensive silver nanoparticles showing superior antibacterial property Liu, L. T.; Li, Y. Z.; Yu, K. P. Materials Research Letters, Vol. 9, Issue 6 https://doi.org/10.1080/21663831.2021.1894613	journal	March 2021
Development of silver-containing austenite antibacterial stainless steels for biomedical applications Part I: microstructure characteristics, mechanical properties and antibacterial mechanisms Huang, Chiung-Fang; Chiang, Hsi-Jen; Lan, Wen-Chien Biofouling, Vol. 27, Issue 5 https://doi.org/10.1080/08927014.2011.582642	journal	May 2011
Study of copper precipitation behavior in a Cu-bearing austenitic antibacterial stainless steel Ren, Ling; Nan, Li; Yang, Ke Materials & Design, Vol. 32, Issue 4 https://doi.org/10.1016/j.matdes.2010.11.030	journal	April 2011
Antibacterial activity against Porphyromonas gingivalis and biological characteristics of antibacterial stainless steel Zhang, Dan; Ren, Ling; Zhang, Yang Colloids and Surfaces B: Biointerfaces, Vol. 105 https://doi.org/10.1016/j.colsurfb.2012.12.025	journal	May 2013
Investigation into manufacturing Fe–Cu–C alloy parts through indirect selective laser sintering Zhang, J.; Shi, Y. S.; Liu, J. H. Materials Science and Technology, Vol. 23, Issue 3 https://doi.org/10.1179/174328407X161213	journal	March 2007
Study on properties of copper-containing austenitic antibacterial stainless steel Luo, Feifei; Tang, Zhenghua; Xiao, Sufen Materials Technology, Vol. 34, Issue 9 https://doi.org/10.1080/10667857.2019.1591726	journal	March 2019
The significance of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) structure on the strain hardening behavior and deformation mechanism in copper-bearing antimicrobial austenitic stainless steel Dong, H.; Li, Z. C.; Somani, M. C. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 119 https://doi.org/10.1016/j.jmbbm.2021.104489	journal	July 2021
On the influence of deformation mechanism during cold and warm rolling on annealing behavior of a 304 stainless steel Sun, Guosheng; Du, Linxiu; Hu, Jun Materials Science and Engineering: A, Vol. 746 https://doi.org/10.1016/j.msea.2019.01.020	journal	February 2019
Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect Shirdel, M.; Mirzadeh, H.; Parsa, M. H. Materials Characterization, Vol. 103 https://doi.org/10.1016/j.matchar.2015.03.031	journal	May 2015
Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel Shakhova, I.; Dudko, V.; Belyakov, A. Materials Science and Engineering: A, Vol. 545 https://doi.org/10.1016/j.msea.2012.02.101	journal	May 2012
Annealing behavior of a 304L stainless steel processed by large strain cold and warm rolling Odnobokova, Marina; Belyakov, Andrey; Enikeev, Nariman Materials Science and Engineering: A, Vol. 689 https://doi.org/10.1016/j.msea.2017.02.073	journal	March 2017
Ensuring the strength and ductility synergy in an austenitic stainless steel: single- or multi-phase hetero-structures design Li, Yong; Li, Wei; Li, Shilei Scripta Materialia, Vol. 193 https://doi.org/10.1016/j.scriptamat.2020.10.041	journal	March 2021
Mechanism of twinning-induced grain boundary engineering in low stacking-fault energy materials Randle, V. Acta Materialia, Vol. 47, Issue 15-16 https://doi.org/10.1016/S1359-6454(99)00277-3	journal	November 1999
Heterogeneous nanostructure developed in heavily cold-rolled stainless steels and the specific mechanical properties Miura, H.; Kobayashi, M.; Todaka, Y. Scripta Materialia, Vol. 133 https://doi.org/10.1016/j.scriptamat.2017.02.016	journal	May 2017
Deformation twinning in nanocrystalline materials Zhu, Y. T.; Liao, X. Z.; Wu, X. L. Progress in Materials Science, Vol. 57, Issue 1 https://doi.org/10.1016/j.pmatsci.2011.05.001	journal	January 2012
Twinning and martensite in a 304 austenitic stainless steel Shen, Y. F.; Li, X. X.; Sun, X. Materials Science and Engineering: A, Vol. 552 https://doi.org/10.1016/j.msea.2012.05.080	journal	August 2012
Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels Nakada, Nobuo; Ito, Hidetoshi; Matsuoka, Yoshikazu Acta Materialia, Vol. 58, Issue 3 https://doi.org/10.1016/j.actamat.2009.10.004	journal	February 2010
Evolution of defect structures during cold rolling of ultrafine-grained Cu and Cu–Zn alloys: Influence of stacking fault energy Zhao, Y. H.; Horita, Z.; Langdon, T. G. Materials Science and Engineering: A, Vol. 474, Issue 1-2 https://doi.org/10.1016/j.msea.2007.06.014	journal	February 2008
Cold rolling behaviour and textural evolution in AISI 316L austenitic stainless steel Chowdhury, Sandip Ghosh; Das, Samar; De, P. K. Acta Materialia, Vol. 53, Issue 14 https://doi.org/10.1016/j.actamat.2005.05.006	journal	August 2005
Crystal plasticity modeling the deformation in nanodomained heterogenous structures Chen, Tianju; Zhou, Caizhi Journal of Materials Research, Vol. 34, Issue 9 https://doi.org/10.1557/jmr.2019.63	journal	March 2019
Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steel Donadille, C.; Valle, R.; Dervin, P. Acta Metallurgica, Vol. 37, Issue 6 https://doi.org/10.1016/0001-6160(89)90123-5	journal	June 1989
Grain boundary stability governs hardening and softening in extremely fine nanograined metals Hu, J.; Shi, Y. N.; Sauvage, X. Science, Vol. 355, Issue 6331 https://doi.org/10.1126/science.aal5166	journal	March 2017
Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels Ravi Kumar, B.; Mahato, B.; Bandyopadhyay, N. R. Materials Science and Engineering: A, Vol. 394, Issue 1-2 https://doi.org/10.1016/j.msea.2004.11.057	journal	March 2005
The temperature dependence of stacking fault energy in Fe-Cr-Ni alloys Latanision, R. M.; Ruff, A. W. Metallurgical Transactions, Vol. 2, Issue 2 https://doi.org/10.1007/BF02663341	journal	February 1971
Temperature dependence of stacking fault energy in close-packed metals and alloys Rémy, L.; Pineau, A.; Thomas, B. Materials Science and Engineering, Vol. 36, Issue 1 https://doi.org/10.1016/0025-5416(78)90194-5	journal	November 1978
Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate Curtze, S.; Kuokkala, V. -T. Acta Materialia, Vol. 58, Issue 15 https://doi.org/10.1016/j.actamat.2010.05.049	journal	September 2010
Effect of reverse austenitic transformation on mechanical property and associated texture evolution in AISI 316 austenitic stainless steel processed by low temperature rolling and annealing Chattopadhyay, Soham; Anand, G.; Chowdhury, Sandip Ghosh Materials Science and Engineering: A, Vol. 734 https://doi.org/10.1016/j.msea.2018.07.087	journal	September 2018
Hardening and softening mechanisms in a nano-lamellar austenitic steel induced by electropulsing treatment Ma, Y. R.; Yang, H. J.; Tian, Y. Z. Materials Science and Engineering: A, Vol. 713 https://doi.org/10.1016/j.msea.2017.12.011	journal	January 2018
High density nano-scale twins in Cu induced by dynamic plastic deformation Zhao, W.; Tao, N.; Guo, J. Scripta Materialia, Vol. 53, Issue 6 https://doi.org/10.1016/j.scriptamat.2005.05.022	journal	September 2005
Residual Stress Distribution through Thickness in Cold-Rolled Aluminum Sheet Hattori, Nobuyuki; Matsumoto, Ryo; Utsunomiya, Hiroshi Key Engineering Materials, Vol. 622-623 https://doi.org/10.4028/www.scientific.net/KEM.622-623.1000	journal	September 2014
Effect of Strain Rate Upon Plastic Flow of Steel Zener, C.; Hollomon, J. H. Journal of Applied Physics, Vol. 15, Issue 1 https://doi.org/10.1063/1.1707363	journal	January 1944
Grain growth behaviour of type 316L stainless steel Kashyap, B. P.; Tangri, K. Materials Science and Engineering: A, Vol. 149, Issue 2 https://doi.org/10.1016/0921-5093(92)90392-E	journal	January 1992
Lattice and grain-boundary diffusion of⁵⁹Fe in 316 stainless steel Patil, R. V.; Sharma, B. D. Metal Science, Vol. 16, Issue 8 https://doi.org/10.1179/030634582790427406	journal	August 1982
Reversion Mechanism from Deformation Induced Martensite to Austenite in Metastable Austenitic Stainless Steels. Tomimura, Kouki; Takaki, Setsuo; Tokunaga, Youichi ISIJ International, Vol. 31, Issue 12 https://doi.org/10.2355/isijinternational.31.1431	journal	January 1991
Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment Sun, G. S.; Du, L. X.; Hu, J. Materials Characterization, Vol. 110 https://doi.org/10.1016/j.matchar.2015.11.001	journal	December 2015
Annealing of Cold-worked Austenitic Stainless Steels. Padilha, Angelo Fernando; Plaut, Ronald Lesley; Rios, Paulo Rangel ISIJ International, Vol. 43, Issue 2 https://doi.org/10.2355/isijinternational.43.135	journal	January 2003
Optimal Chemical Composition in Fe-Cr-Ni Alloys for Ultra Grain Refining by Reversion of Deformation Induced Martensite Takaki, Setsuo; Tanimoto, Seiji; Tomimura, Kouki Tetsu-to-Hagane, Vol. 74, Issue 6 https://doi.org/10.2355/tetsutohagane1955.74.6_1052	journal	January 1988
Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels Sohrabi, Mohammad Javad; Mirzadeh, Hamed; Dehghanian, Changiz Journal of Materials Engineering and Performance, Vol. 29, Issue 5 https://doi.org/10.1007/s11665-020-04798-7	journal	April 2020
Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel Naghizadeh, Meysam; Mirzadeh, Hamed Metallurgical and Materials Transactions A, Vol. 49, Issue 6 https://doi.org/10.1007/s11661-018-4583-6	journal	March 2018
Thermodynamics basis of saturation of martensite content during reversion annealing of cold rolled metastable austenitic steel Sohrabi, Mohammad Javad; Mirzadeh, Hamed; Dehghanian, Changiz Vacuum, Vol. 174 https://doi.org/10.1016/j.vacuum.2020.109220	journal	April 2020
Cu-assisted austenite reversion and enhanced TRIP effect in maraging stainless steels Niu, M. C.; Yang, K.; Luan, J. H. Journal of Materials Science & Technology, Vol. 104 https://doi.org/10.1016/j.jmst.2021.06.055	journal	March 2022
Literature review on the mechanical properties of materials after surface mechanical attrition treatment (SMAT) Olugbade, Temitope Olumide; Lu, Jian Nano Materials Science, Vol. 2, Issue 1 https://doi.org/10.1016/j.nanoms.2020.04.002	journal	March 2020
Excellent strength-toughness synergy in metastable austenitic stainless steel due to gradient structure formation Panov, D. O.; Chernichenko, R. S.; Naumov, S. V. Materials Letters, Vol. 303 https://doi.org/10.1016/j.matlet.2021.130585	journal	November 2021
Enhanced tensile and bending yield strengths of 304 stainless steel and H62 brass by surface spinning strengthening Ren, C. X.; Wang, Q.; Zhang, Z. J. Materials Science and Engineering: A, Vol. 754 https://doi.org/10.1016/j.msea.2019.03.113	journal	April 2019
Enhanced mechanical behaviors of gradient nano-grained austenite stainless steel by means of ultrasonic impact treatment Yang, Xinjun; Wang, Xinyue; Ling, Xiang Results in Physics, Vol. 7 https://doi.org/10.1016/j.rinp.2017.04.002	journal	January 2017
On strain hardening mechanism in gradient nanostructures Li, Jianjun; Weng, G. J.; Chen, Shaohua International Journal of Plasticity, Vol. 88 https://doi.org/10.1016/j.ijplas.2016.10.003	journal	January 2017
Gradient transition zone structure in “steel–copper” sample produced by double wire-feed electron beam additive manufacturing Osipovich, Kseniya S.; Astafurova, Elena G.; Chumaevskii, Andrey V. Journal of Materials Science, Vol. 55, Issue 22 https://doi.org/10.1007/s10853-020-04549-y	journal	March 2020
Extraordinary strain hardening by gradient structure Wu, X.; Jiang, P.; Chen, L. Proceedings of the National Academy of Sciences, Vol. 111, Issue 20 https://doi.org/10.1073/pnas.1324069111	journal	May 2014
Nanostructural metallic materials: Structures and mechanical properties Sun, L. G.; Wu, G.; Wang, Q. Materials Today, Vol. 38 https://doi.org/10.1016/j.mattod.2020.04.005	journal	September 2020
Stabilizing nanostructures in metals using grain and twin boundary architectures Lu, K. Nature Reviews Materials, Vol. 1, Issue 5 https://doi.org/10.1038/natrevmats.2016.19	journal	March 2016
A state-of-the-art review on fatigue life prediction methods for metal structures Cui, Weicheng Journal of Marine Science and Technology, Vol. 7, Issue 1 https://doi.org/10.1007/s007730200012	journal	June 2002
Sliding wear behaviour of surface mechanical attrition treated AISI 304 stainless steel Sun, Y. Tribology International, Vol. 57 https://doi.org/10.1016/j.triboint.2012.07.015	journal	January 2013
Analysis of fatigue resistance improvements via surface severe plastic deformation Dai, K.; Shaw, L. International Journal of Fatigue, Vol. 30, Issue 8 https://doi.org/10.1016/j.ijfatigue.2007.10.010	journal	August 2008
An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel Torres, M. International Journal of Fatigue, Vol. 24, Issue 8 https://doi.org/10.1016/S0142-1123(01)00205-5	journal	August 2002
Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel Mordyuk, B. N.; Prokopenko, G. I.; Vasylyev, M. A. Materials Science and Engineering: A, Vol. 458, Issue 1-2 https://doi.org/10.1016/j.msea.2006.12.049	journal	June 2007
Mechanical properties of DLC coating sputter deposited on surface nanocrystallized 304 stainless steel Fu, T.; Zhou, Z. F.; Zhou, Y. M. Surface and Coatings Technology, Vol. 207 https://doi.org/10.1016/j.surfcoat.2012.07.076	journal	August 2012
Microstructural Evolution of SS304 upon Various Shot Peening Treatments He, Yinsheng; Li, Kejian; Shik Cho, In Microscopy and Microanalysis, Vol. 20, Issue S3 https://doi.org/10.1017/S1431927614005947	journal	August 2014
Torsional deformation-induced gradient hierarchical structure in a 304 stainless steel Tian, Jia-long; Hu, Guang; Wang, Wei Journal of Iron and Steel Research International, Vol. 28, Issue 6 https://doi.org/10.1007/s42243-020-00526-6	journal	January 2021
Fatigue crack initiation and propagation on shot-peened surfaces in A316 stainless steel Delosrios, E.; Walley, A.; Milan, M. International Journal of Fatigue, Vol. 17, Issue 7 https://doi.org/10.1016/0142-1123(95)00044-T	journal	October 1995
Influence of peening on the corrosion properties of AISI 304 stainless steel Lee, Han-sang; Kim, Doo-soo; Jung, Jine-sung Corrosion Science, Vol. 51, Issue 12 https://doi.org/10.1016/j.corsci.2009.08.008	journal	December 2009
Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 1Cr18Ni9Ti stainless steel Wang, Tiansheng; Yu, Jinku; Dong, Bingfeng Surface and Coatings Technology, Vol. 200, Issue 16-17 https://doi.org/10.1016/j.surfcoat.2005.04.046	journal	April 2006
Study of the austenitic stainless steel with gradient structured surface fabricated via shot peening He, Yinsheng; Yoo, Keun-Bong; Ma, Houyu Materials Letters, Vol. 215 https://doi.org/10.1016/j.matlet.2017.12.021	journal	March 2018
The effect of shot peening on stress corrosion cracking behaviour of 2205-duplex stainless steel Al-Obaid, Y. F. Engineering Fracture Mechanics, Vol. 51, Issue 1 https://doi.org/10.1016/0013-7944(94)00213-2	journal	May 1995
Surface nanocrystallization and gradient microstructural evolutions in the surface layers of 321 stainless steel alloy treated via severe shot peening Pour-Ali, Sadegh; Kiani-Rashid, Ali-Reza; Babakhani, Abolfazl Vacuum, Vol. 144 https://doi.org/10.1016/j.vacuum.2017.07.016	journal	October 2017
Insights into formation of gradient nanostructured (GNS) layer and deformation induced martensite in AISI 316 stainless steel subjected to severe shot peening Jayalakshmi, M.; Huilgol, Prashant; Bhat, Badekai Ramachandra Surface and Coatings Technology, Vol. 344 https://doi.org/10.1016/j.surfcoat.2018.03.028	journal	June 2018
An experimental study on the erosion of stainless steel wire mesh sand screen using sand blasting technique Kanesan, Dinesh; Mohyaldinn, Mysara Eissa; Ismail, Noor Ilyana Journal of Natural Gas Science and Engineering, Vol. 65 https://doi.org/10.1016/j.jngse.2019.03.017	journal	May 2019
Corrosion behaviour of glass-bead blasted stainless steel sheets and other sheets with dull surface finish in a chloride solution Faller, M.; Buzzi, St.; v. Trzebiatowski, O. Materials and Corrosion, Vol. 56, Issue 6 https://doi.org/10.1002/maco.200403846	journal	June 2005
Surface preparation of stainless steel 316L, bronze CW451K and titanium Ti6Al4V for bonding to polyurethane in marine cable connector assemblies Makama, Z.; Doble, I.; Nicolson, D. Transactions of the IMF, Vol. 89, Issue 5 https://doi.org/10.1179/174591911X13125496893308	journal	September 2011
Mechanization of the Grit Blasting Process for Thermal Spray Coating Applications: A Parameter Study Begg, Henry; Riley, Melissa; de Villiers Lovelock, Heidi Journal of Thermal Spray Technology, Vol. 25, Issue 1-2 https://doi.org/10.1007/s11666-015-0324-1	journal	October 2015
Surface morphology characterization of grade 304L stainless steel after abrasive blasting Tshimanga, Ngalula L.; Combrink, Gregory A.; Wa Kalenga, Michel Materials Today: Proceedings, Vol. 38 https://doi.org/10.1016/j.matpr.2020.02.397	journal	January 2021
Mechanical and electrochemical behavior of nanocrystalline surface of 304 stainless steel Wang, X. Y.; Li, D. Y. Electrochimica Acta, Vol. 47, Issue 24 https://doi.org/10.1016/S0013-4686(02)00365-1	journal	September 2002
Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties Multigner, M.; Ferreira-Barragáns, S.; Frutos, E. Surface and Coatings Technology, Vol. 205, Issue 7 https://doi.org/10.1016/j.surfcoat.2010.07.126	journal	December 2010
Surface Engineering of Stainless Steels: Role of Surface Mechanical Attrition Treatment (SMAT) Gatey, Atul M.; Hosmani, Santosh S.; Singh, Rajkumar Advanced Materials Research, Vol. 794 https://doi.org/10.4028/www.scientific.net/AMR.794.238	journal	September 2013
Inhomogeneity of plastic deformation in austenitic stainless steel after surface mechanical attrition treatment Bajda, Szymon; Ratuszek, Wiktoria; Krzyzanowski, Michal Surface and Coatings Technology, Vol. 329 https://doi.org/10.1016/j.surfcoat.2017.09.049	journal	November 2017
On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature Novelli, M.; Fundenberger, J-J.; Bocher, P. Applied Surface Science, Vol. 389 https://doi.org/10.1016/j.apsusc.2016.08.009	journal	December 2016
Experimental study of microstructure changes due to low cycle fatigue of a steel nanocrystallised by Surface Mechanical Attrition Treatment (SMAT) Sun, Z.; Retraint, D.; Baudin, T. Materials Characterization, Vol. 124 https://doi.org/10.1016/j.matchar.2016.12.017	journal	February 2017
Electrochemical Behaviour of Surface Modified AISI 304 Grade Stainless Steel in Ringer’s Solution Balusamy, T.; Kumar, Satendra; Sankara Narayanan, T. S. N. Transactions of the Indian Institute of Metals, Vol. 64, Issue 4-5 https://doi.org/10.1007/s12666-011-0076-7	journal	October 2011
Effect of surface mechanical attrition treatment on low cycle fatigue properties of an austenitic stainless steel Zhou, J.; Sun, Z.; Kanouté, P. International Journal of Fatigue, Vol. 103 https://doi.org/10.1016/j.ijfatigue.2017.06.011	journal	October 2017
Enhancing the mechanical and biological performance of a metallic biomaterial for orthopedic applications through changes in the surface oxide layer by nanocrystalline surface modification Bahl, Sumit; Shreyas, P.; Trishul, M. A. Nanoscale, Vol. 7, Issue 17 https://doi.org/10.1039/C5NR00574D	journal	January 2015
A Facile Method to Modify the Characteristics and Corrosion Behavior of 304 Stainless Steel by Surface Nanostructuring toward Biomedical Applications Thangaraj, Balusamy; T. S. Nellaiappan, Sankara Narayanan; Kulandaivelu, Ravichandran ACS Applied Materials & Interfaces, Vol. 7, Issue 32 https://doi.org/10.1021/acsami.5b03877	journal	August 2015
Effect of surface mechanical attrition treatment on corrosion behavior of 316 stainless steel Hao, Yun-wei; Deng, Bo; Zhong, Cheng Journal of Iron and Steel Research International, Vol. 16, Issue 2 https://doi.org/10.1016/S1006-706X(09)60030-3	journal	February 2009
Twin density gradient induces enhanced yield strength-and-ductility synergy in a S31254 super austenitic stainless steel Chen, Ting-Ting; Wang, Jing; Zhang, Yi Materials Science and Engineering: A, Vol. 837 https://doi.org/10.1016/j.msea.2022.142727	journal	March 2022
Effect of surface nanocrystallization on the corrosion behaviour of AISI 409 stainless steel Balusamy, T.; Kumar, Satendra; Sankara Narayanan, T. S. N. Corrosion Science, Vol. 52, Issue 11 https://doi.org/10.1016/j.corsci.2010.07.004	journal	November 2010
Tensile properties of a nanocrystalline 316L austenitic stainless steel Chen, X. H.; Lu, J.; Lu, L. Scripta Materialia, Vol. 52, Issue 10 https://doi.org/10.1016/j.scriptamat.2005.01.023	journal	May 2005
Enhanced mechanical behavior of a nanocrystallised stainless steel and its thermal stability Roland, T.; Retraint, D.; Lu, K. Materials Science and Engineering: A, Vol. 445-446 https://doi.org/10.1016/j.msea.2006.09.041	journal	February 2007
Evaluation of stress corrosion cracking susceptibility of stainless steel 304L with surface nanocrystallization by small punch test Bai, Tao; Chen, Peng; Guan, Kaishu Materials Science and Engineering: A, Vol. 561 https://doi.org/10.1016/j.msea.2012.10.071	journal	January 2013
Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel Balusamy, T.; Sankara Narayanan, T. S. N.; Ravichandran, K. Corrosion Science, Vol. 74 https://doi.org/10.1016/j.corsci.2013.04.056	journal	September 2013
Enhanced repeated frictional sliding properties in 304 stainless steel with a gradient nanostructured surface Bernoulli, Daniel; Cao, Shan Cecilia; Lu, Jian Surface and Coatings Technology, Vol. 339 https://doi.org/10.1016/j.surfcoat.2018.01.081	journal	April 2018
Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment Lu, K.; Lu, J. Materials Science and Engineering: A, Vol. 375-377 https://doi.org/10.1016/j.msea.2003.10.261	journal	July 2004
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer Huang, H. W.; Wang, Z. B.; Lu, J. Acta Materialia, Vol. 87 https://doi.org/10.1016/j.actamat.2014.12.057	journal	April 2015
Anti-corrosion and corrosive wear properties of AISI 316L stainless steel with surface nanocrystallization by surface mechanical rolling treatment Shen, Ming-Xue; Rong, Kang-Jie; Liu, De-Jia Surface Topography: Metrology and Properties, Vol. 8, Issue 3 https://doi.org/10.1088/2051-672X/aba7a4	journal	July 2020
Cyclic deformation and fatigue behavior of 316L stainless steel processed by surface mechanical rolling treatment Carneiro, Luiz; Wang, Xiaogui; Jiang, Yanyao International Journal of Fatigue, Vol. 134 https://doi.org/10.1016/j.ijfatigue.2019.105469	journal	May 2020
Enhanced fatigue performance and surface mechanical properties of AISI 304 stainless steel induced by electropulsing-assisted ultrasonic surface rolling process Wang, Hai-bo; Yang, Xin-hua; Li, He Journal of Materials Research, Vol. 33, Issue 22 https://doi.org/10.1557/jmr.2018.307	journal	September 2018
Corrosion behaviour of nanocrystallines 304 stainless steel in simulated secondary side environment Liu, Jiang; Wang, Chunming; Zhang, Wenlong Materials Science and Technology, Vol. 35, Issue 8 https://doi.org/10.1080/02670836.2019.1595896	journal	March 2019
Surface nanocrystallization of 17-4 precipitation-hardening stainless steel subjected to ultrasonic surface rolling process Liu, Dan; Liu, Daoxin; Zhang, Xiaohua Materials Science and Engineering: A, Vol. 726 https://doi.org/10.1016/j.msea.2018.04.033	journal	May 2018
Enhanced Wear Resistance of 316 L Stainless Steel with a Nanostructured Surface Layer Prepared by Ultrasonic Surface Rolling Wang, Cong; Han, Jing; Zhao, Jiyun Coatings, Vol. 9, Issue 4 https://doi.org/10.3390/coatings9040276	journal	April 2019
Fatigue behaviors of 2205 duplex stainless steel with gradient nanostructured surface layer Liu, Yi-Xin; Chen, Hao; Wang, Run-Zi International Journal of Fatigue, Vol. 147 https://doi.org/10.1016/j.ijfatigue.2021.106170	journal	June 2021
Fabrication of Low Roughness Gradient Nanostructured Inner Surface on an AISI 304 Stainless Steel Pipe via Ultra-Sonic Rolling Treatment (USRT) Han, Xiaolei; Li, Changji; Chen, Chunhuan Nanomaterials, Vol. 11, Issue 7 https://doi.org/10.3390/nano11071769	journal	July 2021
Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process Wang, Haibo; Song, Guolin; Tang, Guoyi Materials Science and Engineering: A, Vol. 662 https://doi.org/10.1016/j.msea.2016.03.097	journal	April 2016
Microstructure and surface properties of 17-4PH stainless steel by ultrasonic surface rolling technology Zhang, Qinglong; Hu, Zhanqi; Su, Wenwen Surface and Coatings Technology, Vol. 321 https://doi.org/10.1016/j.surfcoat.2017.04.052	journal	July 2017
Correlation of orientation relationships and strain-induced martensitic transformation sequences in a gradient austenitic stainless steel He, Yinsheng; Wang, Kai; Shin, Keesam Journal of Materials Science, Vol. 56, Issue 7 https://doi.org/10.1007/s10853-020-05551-0	journal	November 2020
Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment Novelli, M.; Bocher, P.; Grosdidier, T. Materials Characterization, Vol. 139 https://doi.org/10.1016/j.matchar.2018.02.028	journal	May 2018
Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening Liu, G.; Lu, J.; Lu, K. Materials Science and Engineering: A, Vol. 286, Issue 1 https://doi.org/10.1016/S0921-5093(00)00686-9	journal	June 2000
Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel Mordyuk, B. N.; Milman, Yu. V.; Iefimov, M. O. Surface and Coatings Technology, Vol. 202, Issue 19 https://doi.org/10.1016/j.surfcoat.2008.04.080	journal	June 2008
On the microstructural evolution pattern toward nano-scale of an AISI 304 stainless steel during high strain rate surface deformation Zhang, Hongwang; Zhao, Yiming; Wang, Yuhui Journal of Materials Science & Technology, Vol. 44 https://doi.org/10.1016/j.jmst.2020.01.027	journal	May 2020
Fabrication of nanostructure in inner-surface of AISI 304 stainless steel pipe with surface plastic deformation Zhang, Hongwang; Zhao, Yiming; Wang, Yuhui Journal of Materials Science & Technology, Vol. 34, Issue 11 https://doi.org/10.1016/j.jmst.2018.05.012	journal	November 2018
Tensile ductility and deformation mechanisms of a nanotwinned 316L austenitic stainless steel Zhang, Y. Z.; Wang, J. J.; Tao, N. R. Journal of Materials Science & Technology, Vol. 36 https://doi.org/10.1016/j.jmst.2019.02.008	journal	January 2020
Enhancing torsion fatigue behaviour of a martensitic stainless steel by generating gradient nanograined layer via surface mechanical grinding treatment Huang, H. W.; Wang, Z. B.; Yong, X. P. Materials Science and Technology, Vol. 29, Issue 10 https://doi.org/10.1179/1743284712Y.0000000192	journal	October 2013
In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT) Samih, Y.; Beausir, B.; Bolle, B. Materials Characterization, Vol. 83 https://doi.org/10.1016/j.matchar.2013.06.006	journal	September 2013
Surface Modification and Biological Approaches for Tackling Titanium Wear-Induced Aseptic Loosening Vishnu, Jithin; Manivasagam, Geetha Journal of Bio- and Tribo-Corrosion, Vol. 7, Issue 1 https://doi.org/10.1007/s40735-021-00474-y	journal	January 2021
Microstructure Evolution and Mechanical Properties of Austenite Stainless Steel with Gradient Twinned Structure by Surface Mechanical Attrition Treatment Chen, Aiying; Wang, Chen; Jiang, Jungan Nanomaterials, Vol. 11, Issue 6 https://doi.org/10.3390/nano11061624	journal	June 2021
Toughened austenitic stainless steel by surface severe plastic deformation Fan, Jitang; Fu, Tao Materials Science and Engineering: A, Vol. 552 https://doi.org/10.1016/j.msea.2012.05.052	journal	August 2012
Microstructure and mechanical properties of AISI 316L steel with an inverse gradient nanostructure fabricated by electro-magnetic induction heating Long, Q. Y.; Lu, J. X.; Fang, T. H. Materials Science and Engineering: A, Vol. 751 https://doi.org/10.1016/j.msea.2019.02.061	journal	March 2019
On the processing, microstructure, mechanical and wear properties of cermet/stainless steel layer composites Farid, Akhtar; Guo, Shiju Acta Materialia, Vol. 55, Issue 4 https://doi.org/10.1016/j.actamat.2006.10.009	journal	February 2007
The martensite phases in 304 stainless steel Mangonon, Pat L.; Thomas, Gareth Metallurgical Transactions, Vol. 1, Issue 6 https://doi.org/10.1007/BF02642003	journal	June 1970
Deformation-Induced Martensite: A New Paradigm for Exceptional Steels Djaziri, Soundes; Li, Yujiao; Nematollahi, Gh. Ali Advanced Materials, Vol. 28, Issue 35 https://doi.org/10.1002/adma.201601526	journal	July 2016
A novel atomic movement mechanism of intersection-induced bct-α → bcc-α′ martensitic phase transformation Fu, Hui; Yuan, Shuqing; Sun, Wanting Scripta Materialia, Vol. 204 https://doi.org/10.1016/j.scriptamat.2021.114153	journal	November 2021
Quantifying the spread in crystallographic textures due to transients in strain path in shot-peening Wang, Zhiyu; Rifat, Mustafa; Saldana, Christopher Materialia, Vol. 2 https://doi.org/10.1016/j.mtla.2018.08.005	journal	October 2018
Evolution of texture and microstructure in pulsed electro-deposited Cu treated by Surface Mechanical Attrition Treatment (SMAT) Blonde, Romain; Chan, Hoi-Lam; Allain-Bonasso, Nathalie Journal of Alloys and Compounds, Vol. 504 https://doi.org/10.1016/j.jallcom.2010.04.040	journal	August 2010
Texture Evolution in Nanocrystalline Fe Induced by Surface Mechanical Attrition Treatment Chen, Wei Ye; Tong, Wei Ping; He, Chang Shu Materials Science Forum, Vol. 706-709 https://doi.org/10.4028/www.scientific.net/MSF.706-709.2663	journal	January 2012
�ber den Mechanismus der Stahlh�rtung Kurdjumow, G.; Sachs, G. Zeitschrift f�r Physik, Vol. 64, Issue 5-6 https://doi.org/10.1007/BF01397346	journal	May 1930
Nanoscale surface modification of AISI 316L stainless steel by severe shot peening Bagherifard, Sara; Slawik, Sebastian; Fernández-Pariente, Inés Materials & Design, Vol. 102 https://doi.org/10.1016/j.matdes.2016.03.162	journal	July 2016
Die martensitischen Umwandlungen in kohlenstoffarmen austenitischen Chrom-Nickel-Stählen Schumann, Hermann; von Fircks, Hans-Jochen Archiv für das Eisenhüttenwesen, Vol. 40, Issue 7 https://doi.org/10.1002/srin.196904358	journal	July 1969
A review of high-strength nanolaminates and evaluation of their properties Nasim, Mohammad; Li, Yuncang; Wen, Ming Journal of Materials Science & Technology, Vol. 50 https://doi.org/10.1016/j.jmst.2020.03.011	journal	August 2020
Ultra-Low Thermal Conductivity in W/Al2O3 Nanolaminates Costescu, R. M. Science, Vol. 303, Issue 5660 https://doi.org/10.1126/science.1093711	journal	February 2004
Characterisation of nanolayered aluminium/palladium thin films using nanoindentation Dayal, P.; Savvides, N.; Hoffman, M. Thin Solid Films, Vol. 517, Issue 13 https://doi.org/10.1016/j.tsf.2009.01.174	journal	May 2009
Structural characterization of TiN/NbN multilayers: X-ray diffraction, energy-filtered TEM and Fresnel contrast techniques compared Lloyd, S. J.; Molina-Aldareguia, J. M.; Clegg, W. J. Journal of Microscopy, Vol. 217, Issue 3 https://doi.org/10.1111/j.1365-2818.2005.01454.x	journal	March 2005
Structure, hardness and thermal stability of TiAlN and nanolayered TiAlN/CrN multilayer films Barshilia, Harish C.; Prakash, M. Surya; Jain, Anjana Vacuum, Vol. 77, Issue 2 https://doi.org/10.1016/j.vacuum.2004.08.020	journal	January 2005
Design of crystalline-amorphous nanolaminates using deformation mechanism maps Cheng, Bin; Trelewicz, Jason R. Acta Materialia, Vol. 153 https://doi.org/10.1016/j.actamat.2018.05.006	journal	July 2018
Superplastic-like deformation in metallic amorphous/crystalline nanolayered micropillars Liu, M. C.; Du, X. H.; Lin, I. C. Intermetallics, Vol. 30 https://doi.org/10.1016/j.intermet.2012.03.037	journal	November 2012
Mechanical behavior of nanoscale Cu/PdSi multilayers Knorr, I.; Cordero, N. M.; Lilleodden, E. T. Acta Materialia, Vol. 61, Issue 13 https://doi.org/10.1016/j.actamat.2013.04.047	journal	August 2013
Structure and high-temperature mechanical behavior relationship in nano-scaled multilayered materials Mara, N.; Sergueeva, A.; Misra, A. Scripta Materialia, Vol. 50, Issue 6 https://doi.org/10.1016/j.scriptamat.2003.11.051	journal	March 2004
Optimum high temperature strength of two-dimensional nanocomposites Monclús, M. A.; Zheng, S. J.; Mayeur, J. R. APL Materials, Vol. 1, Issue 5 https://doi.org/10.1063/1.4828757	journal	November 2013
Microstructure analysis and observation of peculiar mechanical properties of Al/Cu/Zn/Ni multi-layered composite produced by Accumulative-Roll-Bonding (ARB) Jafarian, H. R.; Mahdavian, M. M.; Shams, S. A. A. Materials Science and Engineering: A, Vol. 805 https://doi.org/10.1016/j.msea.2020.140556	journal	February 2021
Structural properties of TiN films grown on stainless steel substrates by a reactive radio-frequency sputtering technique at low temperature Kang, T. W.; Kim, T. W. Applied Surface Science, Vol. 150, Issue 1-4 https://doi.org/10.1016/S0169-4332(98)00613-8	journal	August 1999
Enhanced Photocatalytic Activity of CuWO4 Doped TiO2 Photocatalyst Towards Carbamazepine Removal under UV Irradiation Anucha, Chukwuka Bethel; Altin, Ilknur; Bacaksız, Emin Separations, Vol. 8, Issue 3 https://doi.org/10.3390/separations8030025	journal	February 2021
Enhancement of antimicrobial and long-term biostability of the zinc-incorporated hydroxyapatite coated 316L stainless steel implant for biomedical application Sutha, S.; Karunakaran, G.; Rajendran, V. Ceramics International, Vol. 39, Issue 5 https://doi.org/10.1016/j.ceramint.2012.12.019	journal	July 2013
Self-poled Pb(Zr,Ti)O3 films with improved pyroelectric properties via the use of (La0.8Sr0.2)MnO3/metal substrate heterostructures Es-Souni, M.; Kuhnke, M.; Iakovlev, S. Applied Physics Letters, Vol. 86, Issue 2 https://doi.org/10.1063/1.1851610	journal	January 2005
Advanced Fabrication Method for the Preparation of MOF Thin Films: Liquid-Phase Epitaxy Approach Meets Spin Coating Method Chernikova, Valeriya; Shekhah, Osama; Eddaoudi, Mohamed ACS Applied Materials & Interfaces, Vol. 8, Issue 31 https://doi.org/10.1021/acsami.6b04701	journal	July 2016
Microstructure, corrosion and tribological and antibacterial properties of Ti–Cu coated stainless steel Jin, Xiaomin; Gao, Lizhen; Liu, Erqiang Journal of the Mechanical Behavior of Biomedical Materials, Vol. 50 https://doi.org/10.1016/j.jmbbm.2015.06.004	journal	October 2015
Construction of SnS2/SnO2 heterostructures with enhanced potassium storage performance Suo, Guoquan; Li, Dan; Feng, Lei Journal of Materials Science & Technology, Vol. 55 https://doi.org/10.1016/j.jmst.2019.05.074	journal	October 2020
Fabrication of CuO–ZnO nanowires on a stainless steel mesh for highly efficient photocatalytic applications Jung, Sungmook; Yong, Kijung Chemical Communications, Vol. 47, Issue 9 https://doi.org/10.1039/c0cc04985a	journal	January 2011
Synchronization of charge carrier separation by tailoring the interface of Si–Au–TiO2 heterostructures via click chemistry for PEC water splitting Behara, Dilip Kumar; Sharma, Gyan Prakash; Upadhyay, Arun Prakash Chemical Engineering Science, Vol. 154 https://doi.org/10.1016/j.ces.2016.06.063	journal	November 2016
Tin-alloy heterostructures encapsulated in amorphous carbon nanotubes as hybrid anodes in rechargeable lithium ion batteries Li, Xifei; Zhong, Yu; Cai, Mei Electrochimica Acta, Vol. 89 https://doi.org/10.1016/j.electacta.2012.11.097	journal	February 2013
Core–shell heterostructures of SnM (M=(Fe, Ni, and Cr) or Cu) alloy nanowires @ CNTs on metallic substrates Zhong, Yu; Zhang, Yong; Cai, Mei Applied Surface Science, Vol. 270 https://doi.org/10.1016/j.apsusc.2013.01.138	journal	April 2013
Construction of MnO2 nanosheets@graphenated carbon nanotube networks core-shell heterostructure on 316L stainless steel as binder-free supercapacitor electrodes Lei, Rui; Gao, Jianhong; Qi, Lifang International Journal of Hydrogen Energy, Vol. 45, Issue 53 https://doi.org/10.1016/j.ijhydene.2019.09.070	journal	October 2020
Development of polyaniline/Cu2ZnSnS4 (CZTS) thin film based heterostructure as room temperature LPG sensor Shinde, N. M.; Deshmukh, P. R.; Patil, S. V. Sensors and Actuators A: Physical, Vol. 193 https://doi.org/10.1016/j.sna.2012.12.022	journal	April 2013
Carbon nanotube–nanocrystal heterostructures fabricated by electrophoretic deposition Mahajan, S. V.; Hasan, S. A.; Cho, J. Nanotechnology, Vol. 19, Issue 19 https://doi.org/10.1088/0957-4484/19/19/195301	journal	April 2008
Designing of Functionalized MWCNTs/Anodized Stainless Steel Heterostructure Electrode for Anodic Oxidation of Low Concentration As(III) in Drinking Water Sarkar, Arpan; Sarkar, Ayan; Paul, Biswajit ChemistrySelect, Vol. 4, Issue 32 https://doi.org/10.1002/slct.201901239	journal	August 2019
Enhanced photoelectrochemical activity of MoS2-decorated ZnO nanowires electrodeposited onto stainless steel mesh for hydrogen production Lamouchi, A.; Assaker, I. Ben; Chtourou, R. Applied Surface Science, Vol. 478 https://doi.org/10.1016/j.apsusc.2019.02.030	journal	June 2019
Direct Growth of Si, Ge, and Si–Ge Heterostructure Nanowires Using Electroplated Zn: An Inexpensive Seeding Technique for Li‐Ion Alloying Anodes Kilian, Seamus; McCarthy, Kieran; Stokes, Killian Small, Vol. 17, Issue 10 https://doi.org/10.1002/smll.202005443	journal	January 2021
A novel ion-exchange strategy for the fabrication of high strong BiOI/BiOBr heterostructure film coated metal wire mesh with tunable visible-light-driven photocatalytic reactivity Wang, Yi; Long, Yang; Yang, Zhiqing Journal of Hazardous Materials, Vol. 351 https://doi.org/10.1016/j.jhazmat.2018.02.027	journal	June 2018
Analytical characterization and antimicrobial properties of novel copper nanoparticle–loaded electrosynthesized hydrogel coatings Cometa, Stefania; Iatta, Roberta; Ricci, Maria Antonietta Journal of Bioactive and Compatible Polymers, Vol. 28, Issue 5 https://doi.org/10.1177/0883911513498960	journal	August 2013
Bactericidal behavior of Cu-containing stainless steel surfaces Zhang, Xiangyu; Huang, Xiaobo; Ma, Yong Applied Surface Science, Vol. 258, Issue 24 https://doi.org/10.1016/j.apsusc.2012.06.074	journal	October 2012
Solvent Vapor Growth of Axial Heterostructure Nanowires with Multiple Alternating Segments of Silicon and Germanium Flynn, Grace; Ramasse, Quentin M.; Ryan, Kevin M. Nano Letters, Vol. 16, Issue 1 https://doi.org/10.1021/acs.nanolett.5b03950	journal	December 2015
Axial Si–Ge Heterostructure Nanowires as Lithium-Ion Battery Anodes Stokes, Killian; Flynn, Grace; Geaney, Hugh Nano Letters, Vol. 18, Issue 9 https://doi.org/10.1021/acs.nanolett.8b01988	journal	August 2018
Epitaxial Growth of Branched α-Fe2O3/SnO2 Nano-Heterostructures with Improved Lithium-Ion Battery Performance Zhou, Weiwei; Cheng, Chuanwei; Liu, Jinping Advanced Functional Materials, Vol. 21, Issue 13 https://doi.org/10.1002/adfm.201100088	journal	March 2011
Highly flexible solution processable heterostructured zinc oxide nanowires mesh for environmental clean-up applications Ong, Wei Li; Yew, Ken Wee; Tan, Chuan Fu RSC Adv., Vol. 4, Issue 52 https://doi.org/10.1039/C4RA03951C	journal	January 2014
Effects of Laser Treatment for the Pb(Zr, Ti)O₃/(La, Sr)MnO₃Heterostructure Prepared onto the Stainless Steel Substrate Shye, Der-Chi; Chou, Chen-Chia; Liou, Bo-Heng Ferroelectrics, Vol. 383, Issue 1 https://doi.org/10.1080/00150190902873485	journal	June 2009
Additive manufacturing of multi-scale heterostructured high-strength steels Tan, Chaolin; Chew, Youxiang; Duan, Ranxi Materials Research Letters, Vol. 9, Issue 7 https://doi.org/10.1080/21663831.2021.1904299	journal	March 2021
Development and characterization of Ti-6Al-4V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing Reichardt, Ashley; Dillon, R. Peter; Borgonia, John Paul Materials & Design, Vol. 104 https://doi.org/10.1016/j.matdes.2016.05.016	journal	August 2016
Multi-layer functional graded stainless steel fabricated by laser melting deposition Zhang, C. H.; Zhang, H.; Wu, C. L. Vacuum, Vol. 141 https://doi.org/10.1016/j.vacuum.2017.04.020	journal	July 2017
Comparison of preferred orientation and stress in silver thin films on different substrates using x-ray diffraction Zoo, Yeongseok; Alford, T. L. Journal of Applied Physics, Vol. 101, Issue 3 https://doi.org/10.1063/1.2401654	journal	February 2007
Study of texture effect on elastic properties of Au thin films by X-ray diffraction and in situ tensile testing Faurie, D.; Renault, P. -O.; Le Bourhis, E. Acta Materialia, Vol. 54, Issue 17 https://doi.org/10.1016/j.actamat.2006.05.036	journal	October 2006
Influence of stress and texture on soft magnetic properties of thin films No authors listed IEEE Transactions on Magnetics, Vol. 38, Issue 5 https://doi.org/10.1109/TMAG.2002.802705	journal	September 2002
Advanced Package Prototyping Using Nano-Particle Silver Printed Interconnects Joo, Sungchul; Baldwin, Daniel F. IEEE Transactions on Electronics Packaging Manufacturing, Vol. 33, Issue 2 https://doi.org/10.1109/TEPM.2010.2044887	journal	April 2010
Epitaxial growth of CdTe thin film on cube-textured Ni by metal-organic chemical vapor deposition Gaire, C.; Rao, S.; Riley, M. Thin Solid Films, Vol. 520, Issue 6 https://doi.org/10.1016/j.tsf.2011.09.019	journal	January 2012
Importance of initial surface film in the degradation of stainless steels by atmospheric exposure Asami, K.; Hashimoto, K. Corrosion Science, Vol. 45, Issue 10 https://doi.org/10.1016/S0010-938X(03)00047-7	journal	October 2003
Development of a thin ceramic-graphene nanolaminate coating for corrosion protection of stainless steel Mondal, Jayanta; Marques, Andreia; Aarik, Lauri Corrosion Science, Vol. 105 https://doi.org/10.1016/j.corsci.2016.01.013	journal	April 2016
Corrosion fatigue of a 12%Cr low pressure turbine blade steel in simulated service environments Perkins, K.; Bache, M. International Journal of Fatigue, Vol. 27, Issue 10-12 https://doi.org/10.1016/j.ijfatigue.2005.06.031	journal	October 2005
Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties Kota, Navya; Charan, Munagala Sai; Laha, Tapas Ceramics International, Vol. 48, Issue 2 https://doi.org/10.1016/j.ceramint.2021.09.232	journal	January 2022
Quantification of hardening contribution of G-Phase precipitation and spinodal decomposition in aged duplex stainless steel: APT analysis and micro-hardness measurements Badyka, R.; Monnet, G.; Saillet, S. Journal of Nuclear Materials, Vol. 514 https://doi.org/10.1016/j.jnucmat.2018.12.002	journal	February 2019
Characterization of the intermetallic G-phase in an AISI 329 duplex stainless steel Mateo, A.; Llanes, L.; Anglada, M. Journal of Materials Science, Vol. 32, Issue 17, p. 4533-4540 https://doi.org/10.1023/A:1018669217124	journal	January 1997
Hardening of Aged Duplex Stainless Steels by Spinodal Decomposition Danoix, F.; Auger, P.; Blavette, D. Microscopy and Microanalysis, Vol. 10, Issue 3 https://doi.org/10.1017/S1431927604040516	journal	June 2004
Ferrite and austenite phase identification in duplex stainless steel using SPM techniques Guo, L. Q.; Lin, M. C.; Qiao, L. J. Applied Surface Science, Vol. 287 https://doi.org/10.1016/j.apsusc.2013.09.041	journal	December 2013
Nanoindentation Characterization of Mechanical Properties of Ferrite and Austenite in Duplex Stainless Steel Wang, Xiu Fang; Yang, Xiao Ping; Guo, Zhen Dan Advanced Materials Research, Vol. 26-28 https://doi.org/10.4028/www.scientific.net/AMR.26-28.1165	journal	October 2007
Relationships Between Stretch-Flangeability and Microstructure-Mechanical Properties in Ultra-High-Strength Dual-Phase Steels Yoon, Jae Ik; Jung, Jaimyun; Lee, Hak Hyeon Metals and Materials International, Vol. 25, Issue 5 https://doi.org/10.1007/s12540-019-00270-x	journal	April 2019
Nano-precipitates evolution and their effects on mechanical properties of 17-4 precipitation-hardening stainless steel Wang, Zemin; Li, Hui; Shen, Qin Acta Materialia, Vol. 156 https://doi.org/10.1016/j.actamat.2018.06.031	journal	September 2018
Interaction of Dislocations and Interfaces in Crystalline Heterostructures: A Review of Atomistic Studies Zhang, Zhibo; Shao, Cancan; Wang, Shuncheng Crystals, Vol. 9, Issue 11 https://doi.org/10.3390/cryst9110584	journal	November 2019
Strengthening of stainless steel by titanium carbide addition and grain refinement during selective laser melting AlMangour, Bandar; Baek, Min-Seok; Grzesiak, Dariusz Materials Science and Engineering: A, Vol. 712 https://doi.org/10.1016/j.msea.2017.11.126	journal	January 2018
Additive manufacturing of ultrafine-grained austenitic stainless steel matrix composite via vanadium carbide reinforcement addition and selective laser melting: Formation mechanism and strengthening effect Li, Bo; Qian, Bo; Xu, Yi Materials Science and Engineering: A, Vol. 745 https://doi.org/10.1016/j.msea.2019.01.008	journal	February 2019
Rapid fabrication of bulk-form TiB2/316L stainless steel nanocomposites with novel reinforcement architecture and improved performance by selective laser melting AlMangour, Bandar; Grzesiak, Dariusz; Yang, Jenn-Ming Journal of Alloys and Compounds, Vol. 680 https://doi.org/10.1016/j.jallcom.2016.04.156	journal	September 2016
Selective laser melting of TiB2/316L stainless steel composites: The roles of powder preparation and hot isostatic pressing post-treatment AlMangour, Bandar; Grzesiak, Dariusz; Yang, Jenn-Ming Powder Technology, Vol. 309 https://doi.org/10.1016/j.powtec.2016.12.073	journal	March 2017
Rapid fabrication of TiN/AISI 420 stainless steel composite by selective laser melting additive manufacturing Zhao, X.; Wei, Q. S.; Gao, N. Journal of Materials Processing Technology, Vol. 270 https://doi.org/10.1016/j.jmatprotec.2019.01.028	journal	August 2019
Effects of ion irradiation on microstructure of 316L stainless steel strengthened by disperse nano TiC through selective laser melting Sun, Zhangjie; Xu, Yuanye; Chen, Feida Materials Characterization, Vol. 180 https://doi.org/10.1016/j.matchar.2021.111420	journal	October 2021
Investigation of microbial corrosion inhibition of Cu-bearing 316L stainless steel in the presence of acid producing bacterium Acidithiobacillus caldus SM-1 Dong, Yuqiao; Li, Jiaqi; Xu, Dake Journal of Materials Science & Technology, Vol. 64 https://doi.org/10.1016/j.jmst.2020.05.070	journal	February 2021
Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease Cappello, Valentina; Marchetti, Laura; Parlanti, Paola Scientific Reports, Vol. 6, Issue 1 https://doi.org/10.1038/s41598-016-0001-8	journal	December 2016
Passivation potential regulating corrosion resistance and antibacterial property of 316L-Cu stainless steel in different simulated body fluids Sun, Yujun; Zhao, Jinlong; Liu, Lichu Materials Technology, Vol. 36, Issue 2 https://doi.org/10.1080/10667857.2020.1734723	journal	March 2020
Antibacterial mechanism of Cu-bearing 430 ferritic stainless steel Zhang, Zhuang; Zhang, Xin-Rui; Jin, Tao Rare Metals, Vol. 41, Issue 2 https://doi.org/10.1007/s12598-021-01751-y	journal	June 2021
A review of recent progress in mechanical and corrosion properties of dual phase steels Kalhor, Alireza; Soleimani, Maryam; Mirzadeh, Hamed Archives of Civil and Mechanical Engineering, Vol. 20, Issue 3 https://doi.org/10.1007/s43452-020-00088-0	journal	July 2020
Transformation-induced plasticity (TRIP) in advanced steels: A review Soleimani, Maryam; Kalhor, Alireza; Mirzadeh, Hamed Materials Science and Engineering: A, Vol. 795 https://doi.org/10.1016/j.msea.2020.140023	journal	September 2020
Thermomechanical processing of advanced high strength steels Zhao, Jingwei; Jiang, Zhengyi Progress in Materials Science, Vol. 94 https://doi.org/10.1016/j.pmatsci.2018.01.006	journal	May 2018
Processing routes, resulting microstructures, and strain rate dependent deformation behaviour of advanced high strength steels for automotive applications Nanda, Tarun; Singh, Vishal; Singh, Gurpreet Archives of Civil and Mechanical Engineering, Vol. 21, Issue 1 https://doi.org/10.1007/s43452-020-00149-4	journal	January 2021
The characterization of G-phase in Fe20Cr9Ni cast duplex stainless steel Chen, Yuefeng; Dai, Xin; Chen, Xudong Materials Characterization, Vol. 149 https://doi.org/10.1016/j.matchar.2019.01.012	journal	March 2019
Ce addition enhances the microbially induced corrosion resistance of Cu-bearing 2205 duplex stainless steel in presence of sulfate reducing bacteria Yin, Lu; Xu, Dake; Yang, Chunguang Corrosion Science, Vol. 179 https://doi.org/10.1016/j.corsci.2020.109141	journal	February 2021
Tensile properties and deformation behavior of ferrite and austenite duplex stainless steel at cryogenic temperatures Koga, Norimitsu; Nameki, Tatsuya; Umezawa, Osamu Materials Science and Engineering: A, Vol. 801 https://doi.org/10.1016/j.msea.2020.140442	journal	January 2021
Stress-Induced Martensitic Transformation Behaviors at Various Temperatures and Their TRIP Effects in SUS304 Metastable Austenitic Stainless Steel Tsuchida, Noriyuki; Morimoto, Yoshiki; Tonan, Tomoyuki ISIJ International, Vol. 51, Issue 1 https://doi.org/10.2355/isijinternational.51.124	journal	January 2011
Investigation on deformation mode dependence of strain-induced martensitic transformation in trip steels and modelling of transformation kinetics Iwamoto, Takeshi; Tsuta, Toshio; Tomita, Yoshihiro International Journal of Mechanical Sciences, Vol. 40, Issue 2-3 https://doi.org/10.1016/S0020-7403(97)00047-7	journal	February 1998
Experimental study on the martensitic transformation in AISI 304 steel sheets subjected to tension under wide ranges of strain rate at room temperature Rodríguez-Martínez, J. A.; Pesci, R.; Rusinek, A. Materials Science and Engineering: A, Vol. 528, Issue 18 https://doi.org/10.1016/j.msea.2011.04.030	journal	July 2011
The influence of copper addition on the formability of AISI 304 stainless steel Gonzalez, B. M.; Castro, C. S. B.; Buono, V. T. L. Materials Science and Engineering: A, Vol. 343, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00362-3	journal	February 2003
Effect of strain rate on the strain-induced γ → α′-martensite transformation and mechanical properties of austenitic stainless steels Talonen, Juho; Hänninen, Hannu; Nenonen, Pertti Metallurgical and Materials Transactions A, Vol. 36, Issue 2 https://doi.org/10.1007/s11661-005-0313-y	journal	February 2005
Influence of phase transformations on the mechanical properties of austenitic stainless steels Lebedev, A. A.; Kosarchuk, V. V. International Journal of Plasticity, Vol. 16, Issue 7-8 https://doi.org/10.1016/S0749-6419(99)00085-6	journal	June 2000
Effect of strain rate on stress-strain behavior of alloy 309 and 304L austenitic stainless steel Lichtenfeld, Joshua A.; Van Tyne, Chester J.; Mataya, Martin C. Metallurgical and Materials Transactions A, Vol. 37, Issue 1 https://doi.org/10.1007/s11661-006-0160-5	journal	January 2006
Effect of Ni content on the tensile properties and strain-induced martensite transformation for 304 stainless steel Ryoo, Do-Yeal; Kang, Namhyun; Kang, Chung-Yun Materials Science and Engineering: A, Vol. 528, Issue 6 https://doi.org/10.1016/j.msea.2010.12.022	journal	March 2011
Effect of nickel and nitrogen addition on the microstructure and mechanical properties of power beam processed duplex stainless steel (UNS 31803) weld metals Muthupandi, V.; Bala Srinivasan, P.; Shankar, V. Materials Letters, Vol. 59, Issue 18 https://doi.org/10.1016/j.matlet.2005.03.010	journal	August 2005
Role of stress-induced martensitic transformation in TRIP effect of metastable austenitic steels Tsuchida, Noriyuki; Kawabata, Saya; Fukaura, Kenzo Journal of Alloys and Compounds, Vol. 577 https://doi.org/10.1016/j.jallcom.2011.11.071	journal	November 2013
Deformation induced martensitic transformation in a 201 modified austenitic stainless steel Tavares, S. S. M.; Pardal, J. M.; da Silva, M. J. Gomes Materials Characterization, Vol. 60, Issue 8 https://doi.org/10.1016/j.matchar.2009.02.001	journal	August 2009
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels Talonen, J.; Hänninen, H. Acta Materialia, Vol. 55, Issue 18 https://doi.org/10.1016/j.actamat.2007.07.015	journal	October 2007
Effect of microstructure on mechanical properties of a novel high-Mn TWIP stainless steel bearing vanadium Hamada, Atef; Kömi, Jukka Materials Science and Engineering: A, Vol. 718 https://doi.org/10.1016/j.msea.2018.01.132	journal	March 2018
Quenching and Partitioning (Q&P) Processing of Martensitic Stainless Steels Mola, Javad; De Cooman, Bruno C. Metallurgical and Materials Transactions A, Vol. 44, Issue 2 https://doi.org/10.1007/s11661-012-1420-1	journal	September 2012
Quenching and partitioning treatment of a low-carbon martensitic stainless steel Tsuchiyama, Toshihiro; Tobata, Junya; Tao, Teruyuki Materials Science and Engineering: A, Vol. 532 https://doi.org/10.1016/j.msea.2011.10.125	journal	January 2012
Contribution of deformation mechanisms to strength and ductility in two Cr–Mn grade austenitic stainless steels Hamada, A. S.; Karjalainen, L. P.; Misra, R. D. K. Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.08.108	journal	January 2013
The fracture toughness behaviour of interpenetrating phase composites Wegner, L. D.; Gibson, L. J. International Journal of Mechanical Sciences, Vol. 43, Issue 8 https://doi.org/10.1016/S0020-7403(01)00016-9	journal	August 2001
The mechanical behaviour of interpenetrating phase composites – II: a case study of a three-dimensionally printed material Wegner, L. D.; Gibson, L. J. International Journal of Mechanical Sciences, Vol. 42, Issue 5 https://doi.org/10.1016/S0020-7403(99)00026-0	journal	May 2000
The mechanical behaviour of interpenetrating phase composites — III: resin-impregnated porous stainless steel Wegner, L. D.; Gibson, L. J. International Journal of Mechanical Sciences, Vol. 43, Issue 4 https://doi.org/10.1016/S0020-7403(00)00035-7	journal	April 2001
Investigation of Compressive and Tensile Behavior of Stainless Steel/Dissolvable Aluminum Bimetallic Composites by Finite Element Modeling and Digital Image Correlation Li, Xiuhui; Ghasri-Khouzani, Morteza; Bogno, Abdoul-Aziz Materials, Vol. 14, Issue 13 https://doi.org/10.3390/ma14133654	journal	June 2021
Anisotropic Dry Sliding Friction and Wear Properties of a Novel Stainless Steel/ZA8 Alloy Interpenetrating Phase Composite Produced by Squeeze Casting Yao, Bibo; Zhou, Zhaoyao; Chen, Zengtao Tribology Transactions, Vol. 63, Issue 3 https://doi.org/10.1080/10402004.2020.1728456	journal	March 2020
Anisotropic compressive properties and energy absorption of metal–resin interpenetrating phase composites Yao, Bibo; Zhou, Zhaoyao; Duan, Liuyang Journal of Materials Research, Vol. 33, Issue 17 https://doi.org/10.1557/jmr.2018.158	journal	May 2018
Production and anisotropic compressibility of 304 stainless steel fiber/ZA8 zinc alloy interpenetrating phase composites Zhou, Zhaoyao; Yao, Bibo; Duan, Liuyang Journal of Alloys and Compounds, Vol. 727 https://doi.org/10.1016/j.jallcom.2017.07.180	journal	December 2017
Damage-tolerant metallic composites via melt infiltration of additively manufactured preforms Pawlowski, Alexander E.; Cordero, Zachary C.; French, Matthew R. Materials & Design, Vol. 127 https://doi.org/10.1016/j.matdes.2017.04.072	journal	August 2017
Large tensile plasticity in Zr-based metallic glass/stainless steel interpenetrating-phase composites prepared by high pressure die casting Gao, W. J.; Zhang, W. W.; Zhang, T. Composites Part B: Engineering, Vol. 224 https://doi.org/10.1016/j.compositesb.2021.109226	journal	November 2021
Anisotropic Charpy impact behavior of novel interpenetrating phase composites Yao, Bibo; Zhou, Zhaoyao; Duan, Liuyang Vacuum, Vol. 155 https://doi.org/10.1016/j.vacuum.2018.05.031	journal	September 2018
Hypervelocity impact of PrintCast 316L/A356 composites Poole, Lauren L.; Gonzales, Manny; French, Matthew R. International Journal of Impact Engineering, Vol. 136 https://doi.org/10.1016/j.ijimpeng.2019.103407	journal	February 2020
Characterization of three-point bending properties of metal–resin interpenetrating phase composites Yao, Bibo; Zhou, Zhaoyao; Duan, Liuyang RSC Advances, Vol. 8, Issue 29 https://doi.org/10.1039/C8RA01953C	journal	January 2018
Microstructure and Mechanical Properties of Magnesium Matrix Composites Interpenetrated by Different Reinforcement Wu, Shuxu; Wang, Shouren; Wen, Daosheng Applied Sciences, Vol. 8, Issue 11 https://doi.org/10.3390/app8112012	journal	October 2018
Microstructure and wear performance of arc-sprayed Al/316L stainless-steel composite coating Li, Qiaolei; Song, Peng; Ji, Qiang Surface and Coatings Technology, Vol. 374 https://doi.org/10.1016/j.surfcoat.2019.06.006	journal	September 2019
Modeling of elastoplastic behavior of stainless-steel/bronze interpenetrating phase composites with damage evolution Cheng, Feifei; Kim, Sun-Myung; Reddy, J. N. International Journal of Plasticity, Vol. 61 https://doi.org/10.1016/j.ijplas.2014.05.001	journal	October 2014
Numerical prediction of elasto-plastic behaviour of interpenetrating phase composites by EFGM Agarwal, Ankit; Singh, I. V.; Mishra, B. K. Composites Part B: Engineering, Vol. 51 https://doi.org/10.1016/j.compositesb.2013.03.022	journal	August 2013
Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials Vajpai, Sanjay Kumar; Ota, Mie; Zhang, Zhe Materials Research Letters, Vol. 4, Issue 4 https://doi.org/10.1080/21663831.2016.1218965	journal	August 2016
Creation of Harmonic Structure Materials with Outstanding Mechanical Properties Ameyama, Kei; Fujiwara, Hiroshi Materials Science Forum, Vol. 706-709 https://doi.org/10.4028/www.scientific.net/MSF.706-709.9	journal	January 2012
Obtaining Copper with Harmonic Structure for the Optimal Balance of Structure-Performance Relationship Orlov, Dmitry; Fujiwara, Hiroshi; Ameyama, Kei MATERIALS TRANSACTIONS, Vol. 54, Issue 9 https://doi.org/10.2320/matertrans.MH201320	journal	January 2013
Application of High Pressure Gas Jet Mill Process to Fabricate High Performance Harmonic Structure Designed Pure Titanium Ota, Mie; Vajpai, Sanjay Kumar; Imao, Ryota MATERIALS TRANSACTIONS, Vol. 56, Issue 1 https://doi.org/10.2320/matertrans.M2014280	journal	January 2015
Dislocation network in additive manufactured steel breaks strength–ductility trade-off Liu, Leifeng; Ding, Qingqing; Zhong, Yuan Materials Today, Vol. 21, Issue 4 https://doi.org/10.1016/j.mattod.2017.11.004	journal	May 2018
Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion Elangeswaran, Chola; Cutolo, Antonio; Muralidharan, Gokula Krishna International Journal of Fatigue, Vol. 123 https://doi.org/10.1016/j.ijfatigue.2019.01.013	journal	June 2019
Corrosion fatigue crack growth of laser additively-manufactured 316L stainless steel in high temperature water Lou, Xiaoyuan; Othon, Michelle A.; Rebak, Raul B. Corrosion Science, Vol. 127 https://doi.org/10.1016/j.corsci.2017.08.023	journal	October 2017
Response of solidification cellular structures in additively manufactured 316 stainless steel to heavy ion irradiation: an in situ study Shang, Z.; Fan, C.; Xue, S. Materials Research Letters, Vol. 7, Issue 7 https://doi.org/10.1080/21663831.2019.1604442	journal	April 2019
Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion Yan, Fuyao; Xiong, Wei; Faierson, Eric Scripta Materialia, Vol. 155 https://doi.org/10.1016/j.scriptamat.2018.06.011	journal	October 2018
Microstructure, Solidification Texture, and Thermal Stability of 316 L Stainless Steel Manufactured by Laser Powder Bed Fusion Krakhmalev, Pavel; Fredriksson, Gunnel; Svensson, Krister Metals, Vol. 8, Issue 8 https://doi.org/10.3390/met8080643	journal	August 2018
Tensile properties, strain rate sensitivity, and activation volume of additively manufactured 316L stainless steels Li, Zan; Voisin, Thomas; McKeown, Joseph T. International Journal of Plasticity, Vol. 120 https://doi.org/10.1016/j.ijplas.2019.05.009	journal	September 2019
Effect of Cover Plate on the Ballistic Performance of Ceramic Armor Sun, Miao; Cao, Wuxiong; Hu, Diqi Materials, Vol. 14, Issue 1 https://doi.org/10.3390/ma14010001	journal	December 2020
Low cycle fatigue of additively manufactured thin-walled stainless steel 316L Yu, Cheng-Han; Leicht, Alexander; Peng, Ru Lin Materials Science and Engineering: A, Vol. 821 https://doi.org/10.1016/j.msea.2021.141598	journal	July 2021
Investigation of the strengthening mechanism in 316L stainless steel produced with laser powder bed fusion Riabov, D.; Leicht, A.; Ahlström, J. Materials Science and Engineering: A, Vol. 822 https://doi.org/10.1016/j.msea.2021.141699	journal	August 2021
Dependence of microstructures on fatigue performance of polycrystals: A comparative study of conventional and additively manufactured 316L stainless steel Cui, Luqing; Jiang, Fuqing; Peng, Ru Lin International Journal of Plasticity, Vol. 149 https://doi.org/10.1016/j.ijplas.2021.103172	journal	February 2022
The role of the solidification structure on orientation-dependent hardness in stainless steel 316L produced by laser powder bed fusion Tekumalla, Sravya; Selvarajou, Balaji; Raman, Sudharshan Materials Science and Engineering: A, Vol. 833 https://doi.org/10.1016/j.msea.2021.142493	journal	January 2022
Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel Cui, Luqing; Jiang, Shuang; Xu, Jinghao Materials & Design, Vol. 198 https://doi.org/10.1016/j.matdes.2020.109385	journal	January 2021
Dynamic recrystallization's role in strength-ductility trade-off in polycrystalline Fe–Cr–Ni stainless steels produced by laser powder bed fusion Heidarzadeh, Akbar; Zavašnik, Janez; Shabadi, Rajashekhara Materials Science and Engineering: A, Vol. 814 https://doi.org/10.1016/j.msea.2021.141214	journal	May 2021
Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering Sabzi, Hossein Eskandari; Hernandez-Nava, Everth; Li, Xiao-Hui Materials & Design, Vol. 212 https://doi.org/10.1016/j.matdes.2021.110246	journal	December 2021
Mechanical behavior of additively manufactured and wrought 316L stainless steels before and after neutron irradiation Byun, T. S.; Garrison, B. E.; McAlister, M. R. Journal of Nuclear Materials, Vol. 548 https://doi.org/10.1016/j.jnucmat.2021.152849	journal	May 2021
In situ high-energy X-ray study of deformation mechanisms in additively manufactured 316L stainless steel Zhang, Xuan; Kenesei, Peter; Park, Jun-Sang Journal of Nuclear Materials, Vol. 549 https://doi.org/10.1016/j.jnucmat.2021.152874	journal	June 2021
Corrosion resistance of 13wt.% Cr martensitic stainless steels: Additively manufactured CX versus wrought Ni-containing AISI 420 Shahriari, Ayda; Ghaffari, Mahya; Khaksar, Ladan Corrosion Science, Vol. 184 https://doi.org/10.1016/j.corsci.2021.109362	journal	May 2021
High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained Shamsujjoha, Md.; Agnew, Sean R.; Fitz-Gerald, James M. Metallurgical and Materials Transactions A, Vol. 49, Issue 7 https://doi.org/10.1007/s11661-018-4607-2	journal	April 2018
Double-slit photoelectron interference in strong-field ionization of the neon dimer Kunitski, Maksim; Eicke, Nicolas; Huber, Pia Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-018-07882-8	journal	January 2019
Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes Li, Zan; He, Bo; Guo, Qiang Scripta Materialia, Vol. 177 https://doi.org/10.1016/j.scriptamat.2019.10.005	journal	March 2020
New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion Voisin, Thomas; Forien, Jean-Baptiste; Perron, Aurelien Acta Materialia, Vol. 203 https://doi.org/10.1016/j.actamat.2020.11.018	journal	January 2021
Additively manufactured hierarchical stainless steels with high strength and ductility Wang, Y. Morris; Voisin, Thomas; McKeown, Joseph T. Nature Materials, Vol. 17, Issue 1 https://doi.org/10.1038/nmat5021	journal	October 2017
Reducing energy poverty through carbon tax revenues in South Africa Winkler, Harald Journal of Energy in Southern Africa, Vol. 28, Issue 3 https://doi.org/10.17159/2413-3051/2017/v28i3a2332	journal	September 2017
Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment Chen, Nan; Ma, Guoqiang; Zhu, Wanquan Materials Science and Engineering: A, Vol. 759 https://doi.org/10.1016/j.msea.2019.04.111	journal	June 2019
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting Salman, O. O.; Gammer, C.; Chaubey, A. K. Materials Science and Engineering: A, Vol. 748 https://doi.org/10.1016/j.msea.2019.01.110	journal	March 2019
Mechanical behavior of selective laser melted 316L stainless steel Suryawanshi, Jyoti; Prashanth, K. G.; Ramamurty, U. Materials Science and Engineering: A, Vol. 696 https://doi.org/10.1016/j.msea.2017.04.058	journal	June 2017
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting Sun, Zhongji; Tan, Xipeng; Tor, Shu Beng NPG Asia Materials, Vol. 10, Issue 4 https://doi.org/10.1038/s41427-018-0018-5	journal	April 2018
Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: A comparative study bringing insights into the impact of microstructure on their passivity Revilla, Reynier I.; Van Calster, Matthieu; Raes, Marc Corrosion Science, Vol. 176 https://doi.org/10.1016/j.corsci.2020.108914	journal	November 2020
Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting Godec, Matjaž; Zaefferer, Stefan; Podgornik, Bojan Materials Characterization, Vol. 160 https://doi.org/10.1016/j.matchar.2019.110074	journal	February 2020
Non-metallic inclusions in 17-4PH stainless steel parts produced by selective laser melting Sun, Yu; Hebert, Rainer J.; Aindow, Mark Materials & Design, Vol. 140 https://doi.org/10.1016/j.matdes.2017.11.063	journal	February 2018
Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells Kong, Decheng; Ni, Xiaoqing; Dong, Chaofang Electrochimica Acta, Vol. 276 https://doi.org/10.1016/j.electacta.2018.04.188	journal	June 2018
Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing Journal of Materials Science & Technology, Vol. 35, Issue 7 https://doi.org/10.1016/j.jmst.2019.03.003	journal	July 2019
In-situ observation of asymmetrical deformation around inclusion in a heterogeneous additively manufactured 316L stainless steel Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing Journal of Materials Science & Technology, Vol. 89 https://doi.org/10.1016/j.jmst.2021.02.022	journal	October 2021
Transformation of austenite to duplex austenite-ferrite assembly in annealed stainless steel 316L consolidated by laser melting Saeidi, K.; Gao, X.; Lofaj, F. Journal of Alloys and Compounds, Vol. 633 https://doi.org/10.1016/j.jallcom.2015.01.249	journal	June 2015
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting Cherry, J. A.; Davies, H. M.; Mehmood, S. The International Journal of Advanced Manufacturing Technology, Vol. 76, Issue 5-8 https://doi.org/10.1007/s00170-014-6297-2	journal	September 2014
Effects of Cell Network Structure on the Strength of Additively Manufactured Stainless Steels Kim, Jung Gi; Seol, Jae Bok; Park, Jeong Min Metals and Materials International, Vol. 27, Issue 8 https://doi.org/10.1007/s12540-021-00991-y	journal	March 2021
Enhancement of fatigue resistance of additively manufactured 304L SS by unique heterogeneous microstructure Zhang, Hongzhuang; Xu, Mengtao; Kumar, Punit Virtual and Physical Prototyping, Vol. 16, Issue 2 https://doi.org/10.1080/17452759.2021.1881869	journal	February 2021
Hall-Petch relationship in selective laser melting additively manufactured metals: using grain or cell size? Wang, Yin; Wang, Yue-ting; Li, Rui-di Journal of Central South University, Vol. 28, Issue 4 https://doi.org/10.1007/s11771-021-4678-x	journal	April 2021
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L Bertsch, K. M.; Meric de Bellefon, G.; Kuehl, B. Acta Materialia, Vol. 199 https://doi.org/10.1016/j.actamat.2020.07.063	journal	October 2020
Hetero-deformation-induced stress in additively manufactured 316L stainless steel Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing Materials Research Letters, Vol. 8, Issue 10 https://doi.org/10.1080/21663831.2020.1775149	journal	June 2020
Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting Kong, Decheng; Ni, Xiaoqing; Dong, Chaofang Materials & Design, Vol. 152 https://doi.org/10.1016/j.matdes.2018.04.058	journal	August 2018
The passivity of selective laser melted 316L stainless steel Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing Applied Surface Science, Vol. 504 https://doi.org/10.1016/j.apsusc.2019.144495	journal	February 2020
Formation of strain-induced martensite in selective laser melting austenitic stainless steel Hong, Yuanjian; Zhou, Chengshuang; Zheng, Yuanyuan Materials Science and Engineering: A, Vol. 740-741 https://doi.org/10.1016/j.msea.2018.10.121	journal	January 2019
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel Chao, Qi; Cruz, Victor; Thomas, Sebastian Scripta Materialia, Vol. 141 https://doi.org/10.1016/j.scriptamat.2017.07.037	journal	December 2017
Post-treatment of additively manufactured Fe–Cr–Ni stainless steels by high pressure torsion: TRIP effect Heidarzadeh, Akbar; Neikter, Magnus; Enikeev, Nariman Materials Science and Engineering: A, Vol. 811 https://doi.org/10.1016/j.msea.2021.141086	journal	April 2021
Revealing relationships between heterogeneous microstructure and strengthening mechanism of austenitic stainless steels fabricated by directed energy deposition (DED) Yan, Zhou; Zou, Ke; Cheng, Manping Journal of Materials Research and Technology, Vol. 15 https://doi.org/10.1016/j.jmrt.2021.08.036	journal	November 2021
Unearthing principal strengthening factors tuning the additive manufactured 15-5 PH stainless steel Chae, Hobyung; Luo, Mao Yuan; Huang, E-Wen Materials Characterization, Vol. 184 https://doi.org/10.1016/j.matchar.2021.111645	journal	February 2022
High-temperature structure and properties of grain boundaries: long-range vs. short-range structural effects Wolf, Dieter Current Opinion in Solid State and Materials Science, Vol. 5, Issue 5 https://doi.org/10.1016/S1359-0286(01)00024-9	journal	October 2001
Theory of plastic deformation: - properties of low energy dislocation structures Kuhlmann-Wilsdorf, D. Materials Science and Engineering: A, Vol. 113 https://doi.org/10.1016/0921-5093(89)90290-6	journal	July 1989
Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals Ma, Evan; Zhu, Ting Materials Today, Vol. 20, Issue 6 https://doi.org/10.1016/j.mattod.2017.02.003	journal	July 2017
Harmonic Structure Design: A Strategy for Outstanding Mechanical Properties in Structural Materials Sharma, Bhupendra; Dirras, Guy; Ameyama, Kei Metals, Vol. 10, Issue 12 https://doi.org/10.3390/met10121615	journal	December 2020
Enhanced Mechanical Properties of Nano/Meso Hybrid Structure Materials Produced by Hot Roll Sintering Process Fujiwara, Hiroshi; Akada, Ryota; Noro, Atsushi MATERIALS TRANSACTIONS, Vol. 49, Issue 1 https://doi.org/10.2320/matertrans.ME200703	journal	January 2008
Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP Tang, Lingling; Zhao, Yonghao; Islamgaliev, R. K. Materials Science and Engineering: A, Vol. 670 https://doi.org/10.1016/j.msea.2016.06.031	journal	July 2016
Plastic Deformation Modes in Mono- and Bimodal-Type Ultrafine-Grained Austenitic Stainless Steel Ravi Kumar, B.; Gujral, Amandeep Metallography, Microstructure, and Analysis, Vol. 3, Issue 5 https://doi.org/10.1007/s13632-014-0152-6	journal	September 2014
Cyclic Deformation Behavior of a 316L Austenitic Stainless Steel Processed by High Pressure Torsion Renk, Oliver; Hohenwarter, Anton; Pippan, Reinhard Advanced Engineering Materials, Vol. 14, Issue 11 https://doi.org/10.1002/adem.201200015	journal	June 2012
Exceptional cavitation erosion-corrosion behavior of dual-phase bimodal structure in austenitic stainless steel Selvam, Karthikeyan; Saini, Jaskaran; Perumal, Gopinath Tribology International, Vol. 134 https://doi.org/10.1016/j.triboint.2019.01.018	journal	June 2019
Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion Gubicza, Jenő; El-Tahawy, Moustafa; Huang, Yi Materials Science and Engineering: A, Vol. 657 https://doi.org/10.1016/j.msea.2016.01.057	journal	March 2016
High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion El-Tahawy, Moustafa; Huang, Yi; Choi, Hyelim Materials Science and Engineering: A, Vol. 682 https://doi.org/10.1016/j.msea.2016.11.066	journal	January 2017
High Tensile Ductility and Strength in Dual-phase Bimodal Steel through Stationary Friction Stir Processing Arora, H. S.; Ayyagari, A.; Saini, J. Scientific Reports, Vol. 9, Issue 1 https://doi.org/10.1038/s41598-019-38707-3	journal	February 2019
In-situ alloying in laser-based additive manufacturing processes: A critical review Mosallanejad, Mohammad Hossein; Niroumand, Behzad; Aversa, Alberta Journal of Alloys and Compounds, Vol. 872 https://doi.org/10.1016/j.jallcom.2021.159567	journal	August 2021
The influence of key process parameters on melt pool geometry in direct energy deposition additive manufacturing systems Sampson, Robert; Lancaster, Robert; Sutcliffe, Mark Optics & Laser Technology, Vol. 134 https://doi.org/10.1016/j.optlastec.2020.106609	journal	February 2021
Effect of Cyclic Thermal Process on Ultrafine Grain Formation in AISI 304L Austenitic Stainless Steel Ravi Kumar, B.; Mahato, B.; Sharma, Sailaja Metallurgical and Materials Transactions A, Vol. 40, Issue 13 https://doi.org/10.1007/s11661-009-0033-9	journal	October 2009
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility Kim, Sang-Heon; Kim, Hansoo; Kim, Nack J. Nature, Vol. 518, Issue 7537 https://doi.org/10.1038/nature14144	journal	February 2015
Phase field modelling of microstructural evolution during the quenching and partitioning treatment in low-alloy steels Mecozzi, M. G.; Eiken, J.; Santofimia, M. J. Computational Materials Science, Vol. 112 https://doi.org/10.1016/j.commatsci.2015.10.048	journal	February 2016
Taming martensitic transformation via concentration modulation at nanoscale Zhu, Jiaming; Gao, Yipeng; Wang, Dong Acta Materialia, Vol. 130 https://doi.org/10.1016/j.actamat.2017.03.042	journal	May 2017
Finite element simulation of strain induced austenite–martensite transformation and fine grain production in stainless steel Bontcheva, N.; Petrov, P.; Petzov, G. Computational Materials Science, Vol. 40, Issue 1 https://doi.org/10.1016/j.commatsci.2006.11.003	journal	July 2007
Phase-field modeling of austenite grain size effect on martensitic transformation in stainless steels Yeddu, Hemantha Kumar Computational Materials Science, Vol. 154 https://doi.org/10.1016/j.commatsci.2018.07.040	journal	November 2018
Phase-Field Modeling of Sigma-Phase Precipitation in 25Cr7Ni4Mo Duplex Stainless Steel Malik, Amer; Odqvist, Joakim; Höglund, Lars Metallurgical and Materials Transactions A, Vol. 48, Issue 10 https://doi.org/10.1007/s11661-017-4214-7	journal	July 2017
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation Jiang, Suihe; Wang, Hui; Wu, Yuan Nature, Vol. 544, Issue 7651 https://doi.org/10.1038/nature22032	journal	April 2017
A Review on Nano-Scale Precipitation in Steels Kong, Hao; Liu, Chain Technologies, Vol. 6, Issue 1 https://doi.org/10.3390/technologies6010036	journal	March 2018
Novel transformation pathway and heterogeneous precipitate microstructure in Ti-alloys Zhang, Tianlong; Wang, Dong; Wang, Yunzhi Acta Materialia, Vol. 196 https://doi.org/10.1016/j.actamat.2020.06.048	journal	September 2020
Phase field study of the copper precipitation in Fe-Cu alloy Zhu, Jiaming; Zhang, Tianlong; Yang, Yong Acta Materialia, Vol. 166 https://doi.org/10.1016/j.actamat.2019.01.009	journal	March 2019
Three-dimensional Monte Carlo simulation of discontinuous grain growth in HAZ of stainless steel during GTAW process Wei, Yanhong; Xu, Yanli; Dong, Zhibo Journal of Materials Processing Technology, Vol. 209, Issue 3 https://doi.org/10.1016/j.jmatprotec.2008.03.062	journal	February 2009
Computer simulation of recrystallization—II. Heterogeneous nucleation and growth Srolovitz, D. J.; Grest, G. S.; Anderson, M. P. Acta Metallurgica, Vol. 36, Issue 8 https://doi.org/10.1016/0001-6160(88)90313-6	journal	August 1988
Computer simulation of recrystallization—I. Homogeneous nucleation and growth Srolovitz, D. J.; Grest, G. S.; Anderson, M. P. Acta Metallurgica, Vol. 34, Issue 9 https://doi.org/10.1016/0001-6160(86)90128-8	journal	September 1986
Computer simulation of recrystallization—III. Influence of a dispersion of fine particles Rollett, A. D.; Srolovitz, D. J.; Anderson, M. P. Acta Metallurgica et Materialia, Vol. 40, Issue 12 https://doi.org/10.1016/0956-7151(92)90062-J	journal	December 1992
2D cellular automaton simulation of the recrystallization texture of an IF sheet steel under consideration of Zener pinning Raabe, Dierk; Hantcherli, Luc Computational Materials Science, Vol. 34, Issue 4 https://doi.org/10.1016/j.commatsci.2004.12.067	journal	December 2005
A hybrid model for mesoscopic simulation of recrystallization Rollett, A. D.; Raabe, D. Computational Materials Science, Vol. 21, Issue 1 https://doi.org/10.1016/S0927-0256(00)00216-0	journal	May 2001
Gradient plasticity in gradient nano-grained metals Zeng, Zhi; Li, Xiaoyan; Xu, Dongsheng Extreme Mechanics Letters, Vol. 8 https://doi.org/10.1016/j.eml.2015.12.005	journal	September 2016
Mechanical properties and optimal grain size distribution profile of gradient grained nickel Lin, Y.; Pan, J.; Zhou, H. F. Acta Materialia, Vol. 153 https://doi.org/10.1016/j.actamat.2018.04.065	journal	July 2018
Microstructures-based constitutive analysis for mechanical properties of gradient-nanostructured 304 stainless steels Zhu, Linli; Ruan, Haihui; Chen, Aiying Acta Materialia, Vol. 128 https://doi.org/10.1016/j.actamat.2017.02.035	journal	April 2017
A study of dynamic plasticity in austenite stainless steels with a gradient distribution of nanoscale twins Zhu, Linli; Wen, Chunsheng; Gao, Chongyang Scripta Materialia, Vol. 133 https://doi.org/10.1016/j.scriptamat.2017.02.005	journal	May 2017
Static and dynamic mechanical behaviors of gradient-nanotwinned stainless steel with a composite structure: Experiments and modeling Zhu, Linli; Wen, Chunsheng; Gao, Chongyang International Journal of Plasticity, Vol. 114 https://doi.org/10.1016/j.ijplas.2018.11.005	journal	March 2019
Crystal Plasticity Simulation on Effect of Heterogeneous-nanostructure Induced by Severe Cold-rolling on Mechanical Properties of Austenitic Stainless Steel Aoyagi, Yoshiteru; Watanabe, Chihiro; Kobayashi, Masakazu Tetsu-to-Hagane, Vol. 105, Issue 2 https://doi.org/10.2355/tetsutohagane.TETSU-2018-078	journal	January 2019
Probing deformation mechanisms of gradient nanostructured CrCoNi medium entropy alloy Li, Jia; Li, Li; Jiang, Chao Journal of Materials Science & Technology, Vol. 57 https://doi.org/10.1016/j.jmst.2020.03.064	journal	November 2020
The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals Bieler, T. R.; Eisenlohr, P.; Roters, F. International Journal of Plasticity, Vol. 25, Issue 9 https://doi.org/10.1016/j.ijplas.2008.09.002	journal	September 2009
A phase field method to simulate crack nucleation and propagation in strongly heterogeneous materials from direct imaging of their microstructure Nguyen, T. T.; Yvonnet, J.; Zhu, Q. -Z. Engineering Fracture Mechanics, Vol. 139 https://doi.org/10.1016/j.engfracmech.2015.03.045	journal	May 2015
Role of interfacial transition zone in phase field modeling of fracture in layered heterogeneous structures Nguyen, Thanh-Tung; Waldmann, Danièle; Bui, Tinh Quoc Journal of Computational Physics, Vol. 386 https://doi.org/10.1016/j.jcp.2019.02.022	journal	June 2019
Phase-field modelling of failure in hybrid laminates Alessi, R.; Freddi, F. Composite Structures, Vol. 181 https://doi.org/10.1016/j.compstruct.2017.08.073	journal	December 2017
A novel FFT-based phase field model for damage and cracking behavior of heterogeneous materials Cao, Y. J.; Shen, W. Q.; Shao, J. F. International Journal of Plasticity, Vol. 133 https://doi.org/10.1016/j.ijplas.2020.102786	journal	October 2020
Texture simulation of a severely cold rolled low carbon steel using polycrystal modeling Takajo, S.; Tomé, C. N.; Vogel, S. C. International Journal of Plasticity, Vol. 109 https://doi.org/10.1016/j.ijplas.2018.06.001	journal	October 2018
Effect of austenitic texture on tensile behavior of lean duplex stainless steel with transformation induced plasticity (TRIP) Kang, Jun-Yun; Kim, Hoyoung; Kim, Kyung-Il Materials Science and Engineering: A, Vol. 681 https://doi.org/10.1016/j.msea.2016.11.001	journal	January 2017
Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites AlMangour, Bandar; Grzesiak, Dariusz; Yang, Jenn-Ming Journal of Alloys and Compounds, Vol. 728 https://doi.org/10.1016/j.jallcom.2017.08.022	journal	December 2017
Orientation relationships of intragranular austenite in duplex stainless steel weld metals Karlsson, L.; Börjesson, J. Science and Technology of Welding and Joining, Vol. 19, Issue 4 https://doi.org/10.1179/1362171813Y.0000000192	journal	January 2014
The formation of ferrite and sigma-phase in some austenitic stainless steels Singhal, L. K.; Martin, J. W. Acta Metallurgica, Vol. 16, Issue 12 https://doi.org/10.1016/0001-6160(68)90039-4	journal	December 1968
Precipitate orientation relationships and interfacial structures in duplex stainless steel Zeron-100 Jiao, Huisheng; Aindow, Mark; Pond, Robert C. Philosophical Magazine, Vol. 83, Issue 16 https://doi.org/10.1080/1478643031000107249	journal	January 2003
Relation between applied stress and orientation relationship of α′ martensite in stainless steel single crystals Higo, Yakichi; Lecroisey, Francis; Mori, T. Acta Metallurgica, Vol. 22, Issue 3 https://doi.org/10.1016/0001-6160(74)90170-9	journal	March 1974
Structure–Property–Functionality of Bimetal Interfaces Beyerlein, I. J.; Mara, N. A.; Wang, J. JOM, Vol. 64, Issue 10 https://doi.org/10.1007/s11837-012-0431-0	journal	September 2012
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness Nishita, Michiru; Park, Seung-Yeol; Nishio, Tadashi Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-016-0028-x	journal	January 2017
Tensile behavior and flow stress anisotropy of accumulative roll bonded Cu-Nb nanolaminates Nizolek, Thomas; Beyerlein, Irene J.; Mara, Nathan A. Applied Physics Letters, Vol. 108, Issue 5 https://doi.org/10.1063/1.4941043	journal	February 2016
Influence of slip and twinning on the crystallographic stability of bimetal interfaces in nanocomposites under deformation Beyerlein, I. J.; Mayeur, J. R.; McCabe, R. J. Acta Materialia, Vol. 72 https://doi.org/10.1016/j.actamat.2014.03.041	journal	June 2014
Room temperature deformation mechanisms of Mg/Nb nanolayered composites Ardeljan, Milan; Knezevic, Marko; Jain, Manish Journal of Materials Research, Vol. 33, Issue 10 https://doi.org/10.1557/jmr.2018.107	journal	May 2018
Emergence of stable interfaces under extreme plastic deformation Beyerlein, I. J.; Mayeur, J. R.; Zheng, S. Proceedings of the National Academy of Sciences, Vol. 111, Issue 12 https://doi.org/10.1073/pnas.1319436111	journal	March 2014
Atomic structure variations of mechanically stable fcc-bcc interfaces Kang, K.; Wang, J.; Beyerlein, I. J. Journal of Applied Physics, Vol. 111, Issue 5 https://doi.org/10.1063/1.3693015	journal	March 2012
Predicting the size scaling in strength of nanolayered materials by a discrete slip crystal plasticity model Chen, Tianju; Yuan, Rui; Beyerlein, Irene J. International Journal of Plasticity, Vol. 124 https://doi.org/10.1016/j.ijplas.2019.08.016	journal	January 2020
Strain fields induced by kink band propagation in Cu-Nb nanolaminate composites Nizolek, T. J.; Begley, M. R.; McCabe, R. J. Acta Materialia, Vol. 133 https://doi.org/10.1016/j.actamat.2017.04.050	journal	July 2017
Texture evolution via combined slip and deformation twinning in rolled silver–copper cast eutectic nanocomposite Beyerlein, Irene J.; Mara, Nathan A.; Bhattacharyya, Dhriti International Journal of Plasticity, Vol. 27, Issue 1 https://doi.org/10.1016/j.ijplas.2010.05.007	journal	January 2011
Interface structure and energy in Cu–71.8wt.% Ag Liu, J. B.; Zeng, Y. W.; Meng, L. Journal of Alloys and Compounds, Vol. 464, Issue 1-2 https://doi.org/10.1016/j.jallcom.2007.10.015	journal	September 2008
Cold rolling texture in AISI 304 stainless steel Kumar, B. Ravi; Singh, A. K.; Das, Samar Materials Science and Engineering: A, Vol. 364, Issue 1-2 https://doi.org/10.1016/j.msea.2003.08.012	journal	January 2004
Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel Wang, Y. D.; Lin Peng, R.; Wang, X. -L Acta Materialia, Vol. 50, Issue 7 https://doi.org/10.1016/S1359-6454(02)00021-6	journal	April 2002
Effect of Warm Rolling and Annealing on Microstructure, Texture, and Mechanical Properties of a 2205 Duplex Stainless Steel Tavares, Tairine Berbert; Rodrigues, Daniella Gomes; Santos, Dagoberto Brandão steel research international, Vol. 91, Issue 4 https://doi.org/10.1002/srin.201900543	journal	April 2020
Strain partitioning and texture evolution during cold rolling of AISI 201 austenitic stainless steel Souza Filho, I. R.; Zilnyk, K. D.; Sandim, M. J. R. Materials Science and Engineering: A, Vol. 702 https://doi.org/10.1016/j.msea.2017.07.010	journal	August 2017
Effect of thermo-mechanical processing on texture evolution in austenitic stainless steel 316L Nezakat, Majid; Akhiani, Hamed; Hoseini, Majid Materials Characterization, Vol. 98 https://doi.org/10.1016/j.matchar.2014.10.006	journal	December 2014
Microstructure and texture evolution of duplex stainless steels with different molybdenum contents Malta, Paula O.; Dias, Francislaynne L.; de Souza, Ana Clara M. Materials Characterization, Vol. 142 https://doi.org/10.1016/j.matchar.2018.06.006	journal	August 2018
In-situ observation of dislocation dynamics near heterostructured interfaces Zhou, Hao; Huang, Chongxiang; Sha, Xuechao Materials Research Letters, Vol. 7, Issue 9 https://doi.org/10.1080/21663831.2019.1616330	journal	May 2019
Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient Wang, Y. F.; Huang, C. X.; Fang, X. T. Scripta Materialia, Vol. 174 https://doi.org/10.1016/j.scriptamat.2019.08.022	journal	January 2020
A micromechanical approach to inelastic behaviour of metals Cailletaud, G. International Journal of Plasticity, Vol. 8, Issue 1 https://doi.org/10.1016/0749-6419(92)90038-E	journal	January 1992
Strengthening mechanisms in directed energy deposited austenitic stainless steel Smith, Thale R.; Sugar, Joshua D.; San Marchi, Chris Acta Materialia, Vol. 164 https://doi.org/10.1016/j.actamat.2018.11.021	journal	February 2019
Effect of thermal annealing on mechanical properties of a nanostructured copper prepared by means of dynamic plastic deformation Li, Y.; Zhang, Y.; Tao, N. Scripta Materialia, Vol. 59, Issue 4 https://doi.org/10.1016/j.scriptamat.2008.04.043	journal	August 2008
Revisiting the Considère criterion from the viewpoint of dislocation theory fundamentals Yasnikov, I. S.; Vinogradov, A.; Estrin, Y. Scripta Materialia, Vol. 76 https://doi.org/10.1016/j.scriptamat.2013.12.009	journal	April 2014
Strain rate sensitivity of the ultrastrong gradient nanocrystalline 316L stainless steel and its rate-dependent modeling at nanoscale Yin, Fei; Hu, Shan; Xu, Rong International Journal of Plasticity, Vol. 129 https://doi.org/10.1016/j.ijplas.2020.102696	journal	June 2020
Dislocation-Based Deformation Mechanisms in Metallic Nanolaminates Anderson, P. M.; Foecke, T.; Hazzledine, P. M. MRS Bulletin, Vol. 24, Issue 2 https://doi.org/10.1557/S0883769400051514	journal	February 1999
Hall-Petch relations for multilayered materials Anderson, P. M.; Li, C. Nanostructured Materials, Vol. 5, Issue 3 https://doi.org/10.1016/0965-9773(95)00250-I	journal	March 1995
The limiting grain size dependence of the strength of a polycrystalline aggregate Armstrong†, R. W.; Chou, Y. T.; Fisher, R. M. Philosophical Magazine, Vol. 14, Issue 131 https://doi.org/10.1080/14786436608244765	journal	October 1966
A unified mechanistic model for Hall–Petch and inverse Hall–Petch relations of nanocrystalline metals based on intragranular dislocation storage Han, Quanfeng; Yi, Xin Journal of the Mechanics and Physics of Solids, Vol. 154 https://doi.org/10.1016/j.jmps.2021.104530	journal	September 2021
The inverse hall–petch relation in nanocrystalline metals: A discrete dislocation dynamics analysis Quek, Siu Sin; Chooi, Zheng Hoe; Wu, Zhaoxuan Journal of the Mechanics and Physics of Solids, Vol. 88 https://doi.org/10.1016/j.jmps.2015.12.012	journal	March 2016
What is behind the inverse Hall–Petch effect in nanocrystalline materials? Carlton, C. E.; Ferreira, P. J. Acta Materialia, Vol. 55, Issue 11 https://doi.org/10.1016/j.actamat.2007.02.021	journal	June 2007
The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals Naik, Sneha N.; Walley, Stephen M. Journal of Materials Science, Vol. 55, Issue 7 https://doi.org/10.1007/s10853-019-04160-w	journal	November 2019
Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting Sun, Shi-Hai; Ishimoto, Takuya; Hagihara, Koji Scripta Materialia, Vol. 159 https://doi.org/10.1016/j.scriptamat.2018.09.017	journal	January 2019
Advantages of architectured harmonic structure in structural performance Orlov, Dmytro; Zhou, Jinming; Hall, Stephen IOP Conference Series: Materials Science and Engineering, Vol. 580, Issue 1 https://doi.org/10.1088/1757-899X/580/1/012019	journal	August 2019
High Temperature Mechanical Properties of Harmonic Structure Designed SUS304L Austenitic Stainless Steel Nakatani, Masashi; Fujiki, Yuya; Ota, Mie Materials Science Forum, Vol. 879 https://doi.org/10.4028/www.scientific.net/MSF.879.2507	journal	November 2016
Effect of Annealing Temperature on the Microstructure and Mechanical Properties of High-Pressure Torsion-Produced 316LN Stainless Steel Dong, Yuanyuan; Zhang, Zhe; Yang, Zhihai Materials, Vol. 15, Issue 1 https://doi.org/10.3390/ma15010181	journal	December 2021
On the development of a novel multi-phase high entropy alloy with transformation-induced plasticity effect Radi, Amin; Asghari-Rad, Peyman; Kim, Hyoung Seop Journal of Alloys and Compounds, Vol. 905 https://doi.org/10.1016/j.jallcom.2022.164014	journal	June 2022
Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains Niu, Gang; Tang, Qibo; Zurob, Hatem S. Materials Science and Engineering: A, Vol. 759 https://doi.org/10.1016/j.msea.2019.04.112	journal	June 2019
Alloy design by dislocation engineering Huang, M. X.; He, B. B. Journal of Materials Science & Technology, Vol. 34, Issue 3 https://doi.org/10.1016/j.jmst.2017.11.045	journal	March 2018
Developing stable fine–grain microstructures by large strain deformation Humphreys, F. J.; Prangnell, P. B.; Bowen, J. R. Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, Vol. 357, Issue 1756 https://doi.org/10.1098/rsta.1999.0395	journal	June 1999
Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing El-Tahawy, Moustafa; Pereira, Pedro Henrique R.; Huang, Yi Materials Letters, Vol. 214 https://doi.org/10.1016/j.matlet.2017.12.040	journal	March 2018
Strain-hardening due to Dispersed Cementite for Low Carbon Ultrafine-grained Steels Ohmori, Akio; Torizuka, Shiro; Nagai, Kotobu ISIJ International, Vol. 44, Issue 6 https://doi.org/10.2355/isijinternational.44.1063	journal	January 2004
Particle size, volume fraction and matrix strength effects on fatigue behavior and particle fracture in 2124 aluminum-SiCp composites Hall, Jody N.; Wayne Jones, J.; Sachdev, Anil K. Materials Science and Engineering: A, Vol. 183, Issue 1-2 https://doi.org/10.1016/0921-5093(94)90891-5	journal	June 1994
Fracture Resistance of Advanced High-Strength Steel Sheets for Automotive Applications Frómeta, D.; Lara, A.; Grifé, L. Metallurgical and Materials Transactions A, Vol. 52, Issue 2 https://doi.org/10.1007/s11661-020-06119-y	journal	January 2021
Thermal stability and tensile property of 316L stainless steel with heterogeneous lamella structure Wang, Shuaizhuo; Li, Jiansheng; Cao, Yang Vacuum, Vol. 152 https://doi.org/10.1016/j.vacuum.2018.03.040	journal	June 2018
The deformation of plastically non-homogeneous materials Ashby, M. F. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, Vol. 21, Issue 170 https://doi.org/10.1080/14786437008238426	journal	February 1970
A critical assessment of the effect of indentation spacing on the measurement of hardness and modulus using instrumented indentation testing Sudharshan Phani, P.; Oliver, W. C. Materials & Design, Vol. 164 https://doi.org/10.1016/j.matdes.2018.107563	journal	February 2019
Mapping of mechanical properties at microstructural length scale in WC-Co cemented carbides: Assessment of hardness and elastic modulus by means of high speed massive nanoindentation and statistical analysis Roa, J. J.; Sudharshan Phani, P.; Oliver, W. C. International Journal of Refractory Metals and Hard Materials, Vol. 75 https://doi.org/10.1016/j.ijrmhm.2018.04.019	journal	September 2018
Nanoindentation analysis as a two-dimensional tool for mapping the mechanical properties of complex surfaces Randall, Nicholas X.; Vandamme, Matthieu; Ulm, Franz-Josef Journal of Materials Research, Vol. 24, Issue 3 https://doi.org/10.1557/jmr.2009.0149	journal	March 2009
Effect of selective-precipitations process on the corrosion resistance and hardness of dual-phase high-carbon steel Handoko, Wilson; Anurag, Aayush; Pahlevani, Farshid Scientific Reports, Vol. 9, Issue 1 https://doi.org/10.1038/s41598-019-52228-z	journal	October 2019
Microstructures and element distributions in an aged hyper duplex stainless steel and corresponding hardness variation Kumar, Sanjeev; Krisam, Sabine; Jacob, Aurélie Materials & Design, Vol. 194 https://doi.org/10.1016/j.matdes.2020.108951	journal	September 2020
Fretting wear mechanism for harmonic, non-harmonic and conventional 316L stainless steels Rai, Prabhat K.; Shekhar, S.; Yagi, K. Wear, Vol. 424-425 https://doi.org/10.1016/j.wear.2019.02.005	journal	April 2019
Improvement in tribocorrosion behavior of 304 stainless steel by surface mechanical attrition treatment Sun, Y.; Bailey, R. Surface and Coatings Technology, Vol. 253 https://doi.org/10.1016/j.surfcoat.2014.05.057	journal	August 2014
Annealing behavior of nano-crystalline austenitic SUS316L produced by HPT Wang, Hongcai; Shuro, Innocent; Umemoto, Minoru Materials Science and Engineering: A, Vol. 556 https://doi.org/10.1016/j.msea.2012.07.089	journal	October 2012
Effect of pre-strain on mechanical properties and deformation induced transformation of 304 stainless steel Zulfi, Fahri R.; Korda, Akhmad A. Journal of Physics: Conference Series, Vol. 739 https://doi.org/10.1088/1742-6596/739/1/012039	journal	August 2016
Investigations on the transformation behavior of the intermetallic phase (Fe, Cr)2Al5 formed on MANET II steel by aluminizing Stein-Fechner, K.; Konys, J.; Wedemeyer, O. Journal of Nuclear Materials, Vol. 249, Issue 1 https://doi.org/10.1016/S0022-3115(97)00208-0	journal	September 1997
Hardness and elastic modulus of TiN based on continuous indentation technique and new correlation Stone, D. S.; Yoder, K. B.; Sproul, W. D. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, Vol. 9, Issue 4 https://doi.org/10.1116/1.577270	journal	July 1991
Re-epithelialization and immune cell behaviour in an ex vivo human skin model Rakita, Ana; Nikolić, Nenad; Mildner, Michael Scientific Reports, Vol. 10, Issue 1 https://doi.org/10.1038/s41598-019-56847-4	journal	January 2020
Improved fatigue resistance of gradient nanograined metallic materials: Suppress strain localization and damage accumulation Pan, Qingsong; Lu, Lei Scripta Materialia, Vol. 187 https://doi.org/10.1016/j.scriptamat.2020.06.038	journal	October 2020
Low-cycle fatigue behavior of austenitic stainless steels with gradient structured surface layer Ho, H. S.; Zhou, W. L.; Li, Y. International Journal of Fatigue, Vol. 134 https://doi.org/10.1016/j.ijfatigue.2020.105481	journal	May 2020
Simultaneous enhancement of stress- and strain-controlled fatigue properties in 316L stainless steel with gradient nanostructure Lei, Y. B.; Wang, Z. B.; Xu, J. L. Acta Materialia, Vol. 168 https://doi.org/10.1016/j.actamat.2019.02.008	journal	April 2019
Effect of bimodal harmonic structure on fatigue properties of austenitic stainless steel under axial loading Kikuchi, Shoichi; Nukui, Yuhei; Nakatsuka, Yuta International Journal of Fatigue, Vol. 127 https://doi.org/10.1016/j.ijfatigue.2019.06.016	journal	October 2019
Evaluation of Fatigue Properties under Four-point Bending and Fatigue Crack Propagation in Austenitic Stainless Steel with a Bimodal Harmonic Structure Kikuchi, Shoichi; Nakatsuka, Yuta; Nakai, Yoshikazu Frattura ed Integrità Strutturale, Vol. 13, Issue 48 https://doi.org/10.3221/IGF-ESIS.48.52	journal	March 2019
Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting Casati, R.; Lemke, J.; Vedani, M. Journal of Materials Science & Technology, Vol. 32, Issue 8 https://doi.org/10.1016/j.jmst.2016.06.016	journal	August 2016
Deformation compatibility between nanotwinned and recrystallized grains enhances resistance to interface cracking in cyclic loaded stainless steel Li, Q.; Yan, F. K.; Tao, N. R. Acta Materialia, Vol. 165 https://doi.org/10.1016/j.actamat.2018.11.033	journal	February 2019
Enhanced high-cycle fatigue resistance of 304 austenitic stainless steel with nanotwinned grains Cui, F.; Pan, Q. S.; Tao, N. R. International Journal of Fatigue, Vol. 143 https://doi.org/10.1016/j.ijfatigue.2020.105994	journal	February 2021
Enhanced resistance to fatigue crack propagation in metastable austenitic stainless steel by nanotwin bundles Matsushita, Aya; Mine, Yoji; Takashima, Kazuki Scripta Materialia, Vol. 201 https://doi.org/10.1016/j.scriptamat.2021.113976	journal	August 2021
Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications Zhai, Wenzheng; Bai, Lichun; Zhou, Runhua Advanced Science, Vol. 8, Issue 11 https://doi.org/10.1002/advs.202003739	journal	March 2021
Tribology of multilayer coatings for wear reduction: A review Khadem, Mahdi; Penkov, Oleksiy V.; Yang, Hee-Kyung Friction, Vol. 5, Issue 3 https://doi.org/10.1007/s40544-017-0181-7	journal	September 2017
Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing Bressan, J. D.; Daros, D. P.; Sokolowski, A. Journal of Materials Processing Technology, Vol. 205, Issue 1-3 https://doi.org/10.1016/j.jmatprotec.2007.11.251	journal	August 2008
Research on oxidation wear mechanism of the cast steels Cui, X. H.; Wang, S. Q.; Wang, F. Wear, Vol. 265, Issue 3-4 https://doi.org/10.1016/j.wear.2007.11.015	journal	July 2008
Friction and Wear Mechanisms of 316L Stainless Steel in Dry Sliding Contact: Effect of Abrasive Particle Size Jourani, A.; Bouvier, S. Tribology Transactions, Vol. 58, Issue 1 https://doi.org/10.1080/10402004.2014.955229	journal	October 2014
Wear Behavior of Harmonic Structured 304L Stainless Steel Rai, Prabhat K.; Shekhar, S.; Nakatani, M. Journal of Materials Engineering and Performance, Vol. 26, Issue 6 https://doi.org/10.1007/s11665-017-2719-2	journal	May 2017
Some metallurgical factors controlling the adhesive and abrasive wear resistance of steels. A review Hurricks, P. L. Wear, Vol. 26, Issue 3 https://doi.org/10.1016/0043-1648(73)90184-1	journal	December 1973
The role of microstructure on wear mechanisms and anisotropy of additively manufactured 316L stainless steel in dry sliding Bahshwan, Mohanad; Myant, Connor W.; Reddyhoff, Tom Materials & Design, Vol. 196 https://doi.org/10.1016/j.matdes.2020.109076	journal	November 2020
The abrasive-corrosive wear of stainless steels Allen, C.; Ball, A.; Protheroe, B. E. Wear, Vol. 74, Issue 2 https://doi.org/10.1016/0043-1648(81)90169-1	journal	December 1981
Annealing Effect on Wear Resistance of Nanostructured 316L Stainless Steel Subjected to Dynamic Plastic Deformation Wang, Bo; Yao, Bin; Han, Zhong Journal of Materials Science & Technology, Vol. 28, Issue 10 https://doi.org/10.1016/S1005-0302(12)60145-5	journal	October 2012
Tribological behaviour of AISI 316L stainless steel for biomedical applications Fellah, M.; Labaïz, M.; Assala, O. Tribology - Materials, Surfaces & Interfaces, Vol. 7, Issue 3 https://doi.org/10.1179/1751584X13Y.0000000032	journal	September 2013
High diffusivity pathways govern massively enhanced oxidation during tribological sliding Rau, Julia S.; Balachandran, Shanoob; Schneider, Reinhard Acta Materialia, Vol. 221 https://doi.org/10.1016/j.actamat.2021.117353	journal	December 2021
Contact and Rubbing of Flat Surfaces Archard, J. F. Journal of Applied Physics, Vol. 24, Issue 8 https://doi.org/10.1063/1.1721448	journal	August 1953
Simulation of wear in a rolling–sliding contact by a semi-Winkler model and the Archard’s wear law Telliskivi, Tanel Wear, Vol. 256, Issue 7-8 https://doi.org/10.1016/S0043-1648(03)00524-6	journal	April 2004
Thermal Mechanisms of Grain Refinement in Steels: A Review Nasiri, Zahra; Ghaemifar, Sajad; Naghizadeh, Meysam Metals and Materials International https://doi.org/10.1007/s12540-020-00700-1	journal	April 2020
Nondestructive measurement of machining-induced amorphous layers in single-crystal silicon by laser micro-Raman spectroscopy Yan, Jiwang; Asami, Tooru; Kuriyagawa, Tsunemoto Precision Engineering, Vol. 32, Issue 3 https://doi.org/10.1016/j.precisioneng.2007.08.006	journal	July 2008
Zirconia-alumina nanolaminate for perforated pitting corrosion protection of stainless steel Gaertner, W. F.; Hoppe, E. E.; Omari, M. A. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, Vol. 22, Issue 2 https://doi.org/10.1116/1.1642650	journal	March 2004
Pitting corrosion protection of stainless steel by sputter deposited hafnia, alumina, and hafnia-alumina nanolaminate films Almomani, M. A.; Aita, C. R. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, Vol. 27, Issue 3 https://doi.org/10.1116/1.3100216	journal	May 2009
Localized Corrosion of Nanocrystalline 304 Type Stainless Steel Films Inturi, R. B.; Szklarska-Smialowska, Z. CORROSION, Vol. 48, Issue 5 https://doi.org/10.5006/1.3315951	journal	May 1992
Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion Williams, David E.; Kilburn, Matt R.; Cliff, John Corrosion Science, Vol. 52, Issue 11 https://doi.org/10.1016/j.corsci.2010.07.021	journal	November 2010
Pitting corrosion of 304ss nanocrystalline thin film Pan, Chen; Liu, Li; Li, Ying Corrosion Science, Vol. 73 https://doi.org/10.1016/j.corsci.2013.03.022	journal	August 2013
Sudden Onset of Pitting Corrosion on Stainless Steel as a Critical Phenomenon Punckt, C. Science, Vol. 305, Issue 5687 https://doi.org/10.1126/science.1101358	journal	August 2004
Corrosion behaviour of Al 1050 severely deformed by rotary swaging Abdulstaar, Mustafa; Mhaede, Mansour; Wagner, Lothar Materials & Design, Vol. 57 https://doi.org/10.1016/j.matdes.2014.01.005	journal	May 2014
Influence of grain refinement on the corrosion behavior of metallic materials: A review Wang, Pan-jun; Ma, Ling-wei; Cheng, Xue-qun International Journal of Minerals, Metallurgy and Materials, Vol. 28, Issue 7 https://doi.org/10.1007/s12613-021-2308-0	journal	July 2021
Reduction of austenite-ferrite galvanic activity in the heat-affected zone of a Gleeble-simulated grade 2205 duplex stainless steel weld Reccagni, P.; Guilherme, L. H.; Lu, Q. Corrosion Science, Vol. 161 https://doi.org/10.1016/j.corsci.2019.108198	journal	December 2019
Influence of microstructure and elemental partitioning on pitting corrosion resistance of duplex stainless steel welding joints Zhang, Zhiqiang; Jing, Hongyang; Xu, Lianyong Applied Surface Science, Vol. 394 https://doi.org/10.1016/j.apsusc.2016.10.047	journal	February 2017
Elemental partitioning and microstructural development in duplex stainless steel weld metal Atamert, S.; King, J. E. Acta Metallurgica et Materialia, Vol. 39, Issue 3 https://doi.org/10.1016/0956-7151(91)90306-L	journal	March 1991
The beneficial galvanic effect of the constituent phases in 2205 duplex stainless steel on the passive films formed in a 3.5% NaCl solution Cheng, Xuequn; Wang, Yi; Dong, Chaofang Corrosion Science, Vol. 134 https://doi.org/10.1016/j.corsci.2018.02.033	journal	April 2018
Interaction between austein-ferrite phases on passive performance of 2205 duplex stainless steel Cheng, Xuequn; Wang, Yi; Li, Xiaogang Journal of Materials Science & Technology, Vol. 34, Issue 11 https://doi.org/10.1016/j.jmst.2018.02.020	journal	November 2018
On the contribution of triple junctions to the structure and properties of nanocrystalline materials Palumbo, G.; Thorpe, S. J.; Aust, K. T. Scripta Metallurgica et Materialia, Vol. 24, Issue 7 https://doi.org/10.1016/0956-716X(90)90354-J	journal	July 1990
Electrochemical Corrosion Behavior of Nanocrystalline Materials—a Review Liu, Li; Li, Ying; Wang, Fuhui Journal of Materials Science & Technology, Vol. 26, Issue 1 https://doi.org/10.1016/S1005-0302(10)60001-1	journal	January 2010
Free energy of active atoms in grain boundaries of nanocrystalline copper, nickel and palladium Kirchheim, R.; Huang, X. Y.; Cui, P. Nanostructured Materials, Vol. 1, Issue 2 https://doi.org/10.1016/0965-9773(92)90071-5	journal	March 1992
Diffusion of chromium in nanocrystalline iron produced by means of surface mechanical attrition treatment Wang, Z. B.; Tao, N. R.; Tong, W. P. Acta Materialia, Vol. 51, Issue 14 https://doi.org/10.1016/S1359-6454(03)00260-X	journal	August 2003
The Electrochemical Corrosion Behavior of Nanocrystalline 304 Stainless Steel Prepared by Magnetron Sputtering Pan, Chen; Liu, Li; Li, Ying Journal of The Electrochemical Society, Vol. 159, Issue 11 https://doi.org/10.1149/2.034211jes	journal	January 2012
Electronic properties and corrosion resistance of passive films on austenitic and duplex stainless steels Tranchida, G.; Clesi, M.; Di Franco, F. Electrochimica Acta, Vol. 273 https://doi.org/10.1016/j.electacta.2018.04.058	journal	May 2018
Degradation in pitting resistance of 316L stainless steel under hydrostatic pressure Zhang, Cheng; Zhang, Zhi-Wei; Liu, Lin Electrochimica Acta, Vol. 210 https://doi.org/10.1016/j.electacta.2016.05.169	journal	August 2016
Influence of nanocrystallization on pitting corrosion behavior of an austenitic stainless steel by stochastic approach and in situ AFM analysis Liu, Li; Li, Ying; Wang, Fuhui Electrochimica Acta, Vol. 55, Issue 7 https://doi.org/10.1016/j.electacta.2009.11.088	journal	February 2010
Microstructures and Corrosion Behaviors of an Austenitic Stainless Steel Strengthened by Nanotwinned Austenitic Grains Yan, Fengkai; Tao, Nairong; Pan, Chen Advanced Engineering Materials, Vol. 18, Issue 4 https://doi.org/10.1002/adem.201500368	journal	October 2015
Using grain boundary engineering to evaluate the diffusion characteristics in ultrafine-grained Al–Mg and Al–Zn alloys Fujita, Takashi; Horita, Zenji; Langdon, Terence G. Materials Science and Engineering: A, Vol. 371, Issue 1-2 https://doi.org/10.1016/j.msea.2003.12.042	journal	April 2004
Effect of Nanocrystalline and twin Boundaries on Corrosion Behavior of 316l Stainless Steel Using smat Lu, A.; Zhang, Y.; Li, Y. Acta Metallurgica Sinica (English Letters), Vol. 19, Issue 3 https://doi.org/10.1016/S1006-7191(06)60042-2	journal	June 2006
Mechanical, stress corrosion cracking and crystallographic study on flat components processed by two combined severe plastic deformation techniques Romero-Resendiz, L.; Cabrera, J. M.; Elizalde, S. Journal of Materials Research and Technology, Vol. 18 https://doi.org/10.1016/j.jmrt.2022.03.010	journal	May 2022
Effect of the microstructure generated by Repetitive Corrugation and Straightening (RCS) process on the mechanical properties and stress corrosion cracking of Al-7075 alloy Romero-Resendiz, L.; Amigó-Borrás, V.; Vicente-Escuder, A. Journal of Materials Research and Technology, Vol. 15 https://doi.org/10.1016/j.jmrt.2021.10.043	journal	November 2021
Corrosion of Iron by Sulfate-Reducing Bacteria: New Views of an Old Problem Enning, Dennis; Garrelfs, Julia Applied and Environmental Microbiology, Vol. 80, Issue 4 https://doi.org/10.1128/AEM.02848-13	journal	December 2013
Bacterial Biofilms in Nature and Disease Costerton, J. W.; Cheng, K. J.; Geesey, G. G. Annual Review of Microbiology, Vol. 41, Issue 1, p. 435-464 https://doi.org/10.1146/annurev.mi.41.100187.002251	journal	October 1987
Microbiological corrosion: mechanism, control and impact—a review Loto, C. A. The International Journal of Advanced Manufacturing Technology, Vol. 92, Issue 9-12 https://doi.org/10.1007/s00170-017-0494-8	journal	May 2017
Biofouling and Biocorrosion in Industrial Water Systems Coetser, S. E.; Cloete, T. E. Critical Reviews in Microbiology, Vol. 31, Issue 4 https://doi.org/10.1080/10408410500304074	journal	January 2005
Inhibition or acceleration: Bacterial test media can determine the course of microbiologically influenced corrosion Javed, M. A.; Stoddart, P. R.; Palombo, E. A. Corrosion Science, Vol. 86 https://doi.org/10.1016/j.corsci.2014.05.003	journal	September 2014
Influence of sulfate reducing bacterial biofilm on corrosion behavior of low-alloy, high-strength steel (API-5L X80) AlAbbas, Faisal M.; Williamson, Charles; Bhola, Shaily M. International Biodeterioration & Biodegradation, Vol. 78 https://doi.org/10.1016/j.ibiod.2012.10.014	journal	March 2013
Adhesion ofDesulfovibrio desulfuricansandPseudomonas fluorescensto mild steel surfaces Beech, Iwona B.; Gaylarde, Christine C. Journal of Applied Bacteriology, Vol. 67, Issue 2 https://doi.org/10.1111/j.1365-2672.1989.tb03396.x	journal	August 1989
Effect of temperature and growth media on the attachment of Listeria monocytogenes to stainless steel Mai, Tam L.; Conner, Donald E. International Journal of Food Microbiology, Vol. 120, Issue 3 https://doi.org/10.1016/j.ijfoodmicro.2007.09.006	journal	December 2007
Surface topographical factors influencing bacterial attachment Crawford, Russell J.; Webb, Hayden K.; Truong, Vi Khanh Advances in Colloid and Interface Science, Vol. 179-182 https://doi.org/10.1016/j.cis.2012.06.015	journal	November 2012
The effect of metal microstructure on the initial attachment ofEscherichia colito 1010 carbon steel Javed, M. A.; Stoddart, P. R.; McArthur, S. L. Biofouling, Vol. 29, Issue 8 https://doi.org/10.1080/08927014.2013.820826	journal	September 2013
Microbiologically influenced corrosion (MIC) in stainless steel heat exchanger Huttunen-Saarivirta, E.; Honkanen, M.; Lepistö, T. Applied Surface Science, Vol. 258, Issue 17 https://doi.org/10.1016/j.apsusc.2012.03.068	journal	June 2012
Rapid MIC attack on 2205 duplex stainless steel pipe in a yacht Liu, William Engineering Failure Analysis, Vol. 42 https://doi.org/10.1016/j.engfailanal.2014.04.001	journal	July 2014
Accelerated corrosion of 2304 duplex stainless steel by marine Pseudomonas aeruginosa biofilm Zhou, Enze; Li, Huabing; Yang, Chuntian International Biodeterioration & Biodegradation, Vol. 127 https://doi.org/10.1016/j.ibiod.2017.11.003	journal	February 2018
Microbiologically influenced corrosion of 304L stainless steel caused by an alga associated bacterium Halomonas titanicae Dong, Yuqiao; Lekbach, Yassir; Li, Zhong Journal of Materials Science & Technology, Vol. 37 https://doi.org/10.1016/j.jmst.2019.06.023	journal	January 2020
Microbiologically influenced corrosion of 304 stainless steel by nitrate reducing Bacillus cereus in simulated Beijing soil solution Yu, Si; Lou, Yuntian; Zhang, Dawei Bioelectrochemistry, Vol. 133 https://doi.org/10.1016/j.bioelechem.2020.107477	journal	June 2020
Salvia officinalis extract mitigates the microbiologically influenced corrosion of 304L stainless steel by Pseudomonas aeruginosa biofilm Lekbach, Yassir; Li, Zhong; Xu, Dake Bioelectrochemistry, Vol. 128 https://doi.org/10.1016/j.bioelechem.2019.04.006	journal	August 2019
Accelerated corrosion of 2205 duplex stainless steel caused by marine aerobic Pseudomonas aeruginosa biofilm Xu, Dake; Xia, Jin; Zhou, Enze Bioelectrochemistry, Vol. 113 https://doi.org/10.1016/j.bioelechem.2016.08.001	journal	February 2017
Microbiologically influenced corrosion of 316L stainless steel in the presence of Chlorella vulgaris Liu, Hongwei; Sharma, Mohita; Wang, Junlei International Biodeterioration & Biodegradation, Vol. 129 https://doi.org/10.1016/j.ibiod.2018.03.001	journal	April 2018
Development and Comparison of Quantitative Phase Analysis for Duplex Stainless Steel Weld Varbai, Balázs; Pickle, Timothy; Májlinger, Kornél Periodica Polytechnica Mechanical Engineering, Vol. 62, Issue 3 https://doi.org/10.3311/PPme.12234	journal	May 2018
Influence of multiple thermal cycles on microstructure of heat-affected zone in TIG-welded super duplex stainless steel Hosseini, Vahid A.; Valiente Bermejo, M. Asunción; Gårdstam, Johannes Welding in the World, Vol. 60, Issue 2 https://doi.org/10.1007/s40194-016-0300-5	journal	February 2016
Numerical analysis of the deformation behavior of 2205 duplex stainless steel TIG weld joint based on the microstructure and micro-mechanical properties Gao, Song; Geng, Shaoning; Jiang, Ping Materials Science and Engineering: A, Vol. 815 https://doi.org/10.1016/j.msea.2021.141303	journal	May 2021
Effect of grain boundary character distribution on weld heat-affected zone liquation cracking behavior of AISI 316Ti austenitic stainless steel K., RamReddy; E., Nandha Kumar; R., Jeyaraam Materials Characterization, Vol. 142 https://doi.org/10.1016/j.matchar.2018.05.020	journal	August 2018
Metallographic screening of duplex stainless steel weld microstructure with a bipolar electrochemistry technique Zhou, Yiqi; Kablan, Abdulaziz; Engelberg, Dirk Lars Materials Characterization, Vol. 169 https://doi.org/10.1016/j.matchar.2020.110605	journal	November 2020
Physical and kinetic simulation of nitrogen loss in high temperature heat affected zone of duplex stainless steels A. Hosseini, Vahid; Karlsson, Leif Materialia, Vol. 6 https://doi.org/10.1016/j.mtla.2019.100325	journal	June 2019
Gradient characteristics and strength matching in friction stir welded joints of Fe–18Cr–16Mn–2Mo–0.85N austenitic stainless steel Du, Dongxu; Fu, Ruidong; Li, Yijun Materials Science and Engineering: A, Vol. 616 https://doi.org/10.1016/j.msea.2014.08.012	journal	October 2014
Microstructural characterization of simulated heat affected zone in a nitrogen-containing 2205 duplex stainless steel Chen, T. H.; Yang, J. R. Materials Science and Engineering: A, Vol. 338, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00065-5	journal	December 2002
Effect of heat input and role of nitrogen on the phase evolution of 2205 duplex stainless steel weldment Varbai, Balázs; Pickle, Timothy; Májlinger, Kornél International Journal of Pressure Vessels and Piping, Vol. 176 https://doi.org/10.1016/j.ijpvp.2019.103952	journal	September 2019
Mechanical properties and microstructural evaluation of the heat-affected zone in ultra-high strength steels Amraei, Mohsen; Afkhami, Shahriar; Javaheri, Vahid Thin-Walled Structures, Vol. 157 https://doi.org/10.1016/j.tws.2020.107072	journal	December 2020
The effect of large heat input on the microstructure and corrosion behaviour of simulated heat affected zone in 2205 duplex stainless steel Yang, Yinhui; Yan, Biao; Li, Jie Corrosion Science, Vol. 53, Issue 11 https://doi.org/10.1016/j.corsci.2011.07.022	journal	November 2011
Effect of welding process on the microstructure and properties of dissimilar weld joints between low alloy steel and duplex stainless steel Wang, Jing; Lu, Min-xu; Zhang, Lei International Journal of Minerals, Metallurgy, and Materials, Vol. 19, Issue 6 https://doi.org/10.1007/s12613-012-0589-z	journal	June 2012
Microstructure and Mechanical Properties of Heat-Affected Zone of Repeated Welding AISI 304N Austenitic Stainless Steel by Gleeble Simulator Guo, Y. H.; Lin, Li; Zhang, Donghui Metals, Vol. 8, Issue 10 https://doi.org/10.3390/met8100773	journal	September 2018
Microstructure and corrosion behavior of S32101 stainless steel underwater dry and wet welded joints Sun, Kun; Zeng, Min; Shi, Yonghua Journal of Materials Processing Technology, Vol. 256 https://doi.org/10.1016/j.jmatprotec.2018.02.018	journal	June 2018
Characterization of inhomogeneous microstructure and mechanical property in an ultra-thick duplex stainless steel welding joint Wan, Yu; Jiang, Wenchun; Wei, Wen Materials Science and Engineering: A, Vol. 822 https://doi.org/10.1016/j.msea.2021.141640	journal	August 2021
Microstructure and corrosion behavior of the heat affected zone of a stainless steel 308L-316L weld joint Ma, Cheng; Peng, Qunjia; Mei, Jinna Journal of Materials Science & Technology, Vol. 34, Issue 10 https://doi.org/10.1016/j.jmst.2017.12.016	journal	October 2018
Experimental investigation of temperature field and fusion zone microstructure in dissimilar pulsed laser welding of austenitic stainless steel and copper Nguyen, Quyen; Azadkhou, Alireza; Akbari, Mohammad Journal of Manufacturing Processes, Vol. 56 https://doi.org/10.1016/j.jmapro.2020.03.037	journal	August 2020
An investigation of fusion zone microstructures in electron beam welding of copper–stainless steel Magnabosco, I.; Ferro, P.; Bonollo, F. Materials Science and Engineering: A, Vol. 424, Issue 1-2 https://doi.org/10.1016/j.msea.2006.03.096	journal	May 2006
Microstructural characterization of low alloy steel A508 – 309/308L stainless steel dissimilar weld metals Okonkwo, Bright O.; Ming, Hongliang; Wang, Jianqiu International Journal of Pressure Vessels and Piping, Vol. 190 https://doi.org/10.1016/j.ijpvp.2020.104297	journal	April 2021
Experimental investigation on microstructure, mechanical properties, and residual stresses of dissimilar welded joint of martensitic P92 and AISI 304L austenitic stainless steel Dak, Gaurav; Pandey, Chandan International Journal of Pressure Vessels and Piping, Vol. 194 https://doi.org/10.1016/j.ijpvp.2021.104536	journal	December 2021
The heat affected zone of X20Cr13 martensitic stainless steel after multiple repair welding: Microstructure and mechanical properties assessment Shojaati, Mohammad; Kashani Bozorg, Seyed Farshid; Vatanara, Masoud International Journal of Pressure Vessels and Piping, Vol. 188 https://doi.org/10.1016/j.ijpvp.2020.104205	journal	December 2020
An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steel Mortezaie, A.; Shamanian, M. International Journal of Pressure Vessels and Piping, Vol. 116 https://doi.org/10.1016/j.ijpvp.2014.01.002	journal	April 2014
Microstructure evolution in heat affected zone of T4003 ferritic stainless steel Zhang, Zhaohan; Wang, Zhibin; Wang, Wenxian Materials & Design, Vol. 68 https://doi.org/10.1016/j.matdes.2014.12.018	journal	March 2015
Microstructure, mechanical properties and corrosion behavior of laser welded dissimilar joints between ferritic stainless steel and carbon steel Wu, Wenyong; Hu, Shengsun; Shen, Junqi Materials & Design (1980-2015), Vol. 65 https://doi.org/10.1016/j.matdes.2014.09.064	journal	January 2015
Microstructure and hardness studies of electron beam welded Inconel 625 and stainless steel 304L Shakil, M.; Ahmad, M.; Tariq, N. H. Vacuum, Vol. 110 https://doi.org/10.1016/j.vacuum.2014.08.016	journal	December 2014
Bacterial attachment to stainless steel welds: Significance of substratum microstructure Sreekumari, Kurissery R.; Nandakumar, Kanavillil; Kikuchi, Yasushi Biofouling, Vol. 17, Issue 4 https://doi.org/10.1080/08927010109378490	journal	December 2001
Influence of Emulsifier on Surface Mass Transfer Based on Molecular Dynamics Simulations Kong, Lingyun; Luo, Wanli; Feng, Biao Frontiers in Materials, Vol. 7 https://doi.org/10.3389/fmats.2020.00001	journal	January 2020
Influence of Surface Characteristics and Microstructure on Adhesion of Bacterial Cells onto a Type 304 Stainless Steel George, R. P.; Muraleedharan, P.; Sreekumari, K. R. Biofouling, Vol. 19, Issue 1 https://doi.org/10.1080/08927010290031017	journal	February 2003
Effects of sulfidation of passive film in the presence of SRB on the pitting corrosion behaviors of stainless steels Li, Fushao; An, Maozhong; Liu, Guangzhou Materials Chemistry and Physics, Vol. 113, Issue 2-3 https://doi.org/10.1016/j.matchemphys.2008.08.077	journal	February 2009
AFM study of microbial colonization and its deleterious effect on 304 stainless steel by Pseudomonas NCIMB 2021 and Desulfovibrio desulfuricans in simulated seawater Yuan, S. J.; Pehkonen, S. O. Corrosion Science, Vol. 51, Issue 6 https://doi.org/10.1016/j.corsci.2009.03.037	journal	June 2009
Surface chemistry and corrosion behaviour of 304 stainless steel in simulated seawater containing inorganic sulphide and sulphate-reducing bacteria Yuan, Shaojun; Liang, Bin; Zhao, Yu Corrosion Science, Vol. 74 https://doi.org/10.1016/j.corsci.2013.04.058	journal	September 2013
MIC of stainless steels: A technical review on the influence of microstructure Ibars, J. R.; Moreno, D. A.; Ranninger, C. International Biodeterioration & Biodegradation, Vol. 29, Issue 3-4 https://doi.org/10.1016/0964-8305(92)90051-O	journal	January 1992
Antibacterial Behavior of a Cu-bearing Type 200 Stainless Steel Nan, Li; Cheng, Jinglong; Yang, Ke Journal of Materials Science & Technology, Vol. 28, Issue 11 https://doi.org/10.1016/S1005-0302(12)60174-1	journal	November 2012
Synergistic effect of sulfate-reducing bacteria and elastic stress on corrosion of X80 steel in soil solution Wu, Tangqing; Xu, Jin; Yan, Maocheng Corrosion Science, Vol. 83 https://doi.org/10.1016/j.corsci.2014.01.017	journal	June 2014
Use of Plasma Technologies for Antibacterial Surface Properties of Metals Benčina, Metka; Resnik, Matic; Starič, Pia Molecules, Vol. 26, Issue 5 https://doi.org/10.3390/molecules26051418	journal	March 2021
Calcium phosphate coatings for bio-implant applications: Materials, performance factors, and methodologies Paital, Sameer R.; Dahotre, Narendra B. Materials Science and Engineering: R: Reports, Vol. 66, Issue 1-3 https://doi.org/10.1016/j.mser.2009.05.001	journal	August 2009
Effect of crystalline grain structures on the mechanical properties of twinning-induced plasticity steel Wang, Kun; Wang, Dan; Han, Fusheng Acta Mechanica Sinica, Vol. 32, Issue 1 https://doi.org/10.1007/s10409-015-0513-7	journal	September 2015
Effect of grain size on mechanical, surface and biological properties of microwave sintered hydroxyapatite Dasgupta, Sudip; Tarafder, Solaiman; Bandyopadhyay, Amit Materials Science and Engineering: C, Vol. 33, Issue 5 https://doi.org/10.1016/j.msec.2013.03.004	journal	July 2013
Mechanical and biological properties of the micro-/nano-grain functionally graded hydroxyapatite bioceramics for bone tissue engineering Zhou, Changchun; Deng, Congying; Chen, Xuening Journal of the Mechanical Behavior of Biomedical Materials, Vol. 48 https://doi.org/10.1016/j.jmbbm.2015.04.002	journal	August 2015
In vitro and in vivo studies of ultrafine-grain Ti as dental implant material processed by ECAP An, Baili; Li, Zhirui; Diao, Xiaoou Materials Science and Engineering: C, Vol. 67 https://doi.org/10.1016/j.msec.2016.04.105	journal	October 2016
Mechanical properties and biological responses of ultrafine-grained pure titanium fabricated by multi-directional forging Ito, Yusuke; Hoshi, Noriyuki; Hayakawa, Tohru Materials Science and Engineering: B, Vol. 245 https://doi.org/10.1016/j.mseb.2019.05.002	journal	June 2019
Cell Response to Nanocrystallized Metallic Substrates Obtained through Severe Plastic Deformation Bagherifard, Sara; Ghelichi, Ramin; Khademhosseini, Ali ACS Applied Materials & Interfaces, Vol. 6, Issue 11 https://doi.org/10.1021/am501119k	journal	May 2014
Effect of ultrafine-grained titanium surfaces on adhesion of bacteria Truong, Vi Khanh; Rundell, Stuart; Lapovok, Rimma Applied Microbiology and Biotechnology, Vol. 83, Issue 5 https://doi.org/10.1007/s00253-009-1944-5	journal	July 2009
Tissue reaction in rabbit muscle exposed to metallic implants Laing, Patrick G.; Ferguson, Albert B.; Hodge, Edwin S. Journal of Biomedical Materials Research, Vol. 1, Issue 1 https://doi.org/10.1002/jbm.820010113	journal	March 1967
Effect of surface modification by nitrogen ion implantation on the electrochemical and cellular behaviors of super-elastic NiTi shape memory alloy Maleki-Ghaleh, H.; Khalil-Allafi, J.; Sadeghpour-Motlagh, M. Journal of Materials Science: Materials in Medicine, Vol. 25, Issue 12 https://doi.org/10.1007/s10856-014-5283-4	journal	July 2014
The influence of nanostructured features on bacterial adhesion and bone cell functions on severely shot peened 316L stainless steel Bagherifard, Sara; Hickey, Daniel J.; de Luca, Alba C. Biomaterials, Vol. 73 https://doi.org/10.1016/j.biomaterials.2015.09.019	journal	December 2015
Surface modification of austenitic stainless steel with plasma nitriding for biomedical applications Ou, Keng-Liang; Chou, Hsin-Hua; Liu, Chung-Ming Surface and Coatings Technology, Vol. 206, Issue 6 https://doi.org/10.1016/j.surfcoat.2011.08.001	journal	December 2011
Investigations into the antibacterial behavior of copper nanoparticles against Escherichia coli Raffi, Muhammad; Mehrwan, Saba; Bhatti, Tariq Mahmood Annals of Microbiology, Vol. 60, Issue 1 https://doi.org/10.1007/s13213-010-0015-6	journal	February 2010
Copper nanoparticles with high antimicrobial activity Bogdanović, Una; Lazić, Vesna; Vodnik, Vesna Materials Letters, Vol. 128 https://doi.org/10.1016/j.matlet.2014.04.106	journal	August 2014
Antimicrobial Nanoparticles: applications and mechanisms of action Fernando, Ssn; Gunasekara, Tdcp; Holton, J. Sri Lankan Journal of Infectious Diseases, Vol. 8, Issue 1 https://doi.org/10.4038/sljid.v8i1.8167	journal	May 2018
The Influential Factors on Antibacterial Behaviour of Copper and Silver Nanoparticles Khodashenas, Bahareh Indian Chemical Engineer, Vol. 58, Issue 3 https://doi.org/10.1080/00194506.2015.1026950	journal	March 2015
Biocidal Efficacy of Copper Alloys against Pathogenic Enterococci Involves Degradation of Genomic and Plasmid DNAs Warnes, S. L.; Green, S. M.; Michels, H. T. Applied and Environmental Microbiology, Vol. 76, Issue 16 https://doi.org/10.1128/AEM.03050-09	journal	August 2010
Bacterial Killing by Dry Metallic Copper Surfaces Santo, Christophe Espírito; Lam, Ee Wen; Elowsky, Christian G. Applied and Environmental Microbiology, Vol. 77, Issue 3 https://doi.org/10.1128/AEM.01599-10	journal	December 2010
Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1 van Doremalen, Neeltje; Bushmaker, Trenton; Morris, Dylan H. New England Journal of Medicine, Vol. 382, Issue 16 https://doi.org/10.1056/NEJMc2004973	journal	April 2020
Corrosion Study of Industrially Sintered Copper Alloyed 316L Austenitic Stainless Steel Fedrizzi, L.; Molinari, A.; DeFlorian, F. British Corrosion Journal, Vol. 26, Issue 1 https://doi.org/10.1179/000705991798269378	journal	January 1991
Deformation mechanism and ductile fracture behavior in high strength high ductility nano/ultrafine grained Fe-17Cr-6Ni austenitic steel Lei, Chengshuai; Li, Xiaolin; Deng, Xiangtao Materials Science and Engineering: A, Vol. 709 https://doi.org/10.1016/j.msea.2017.10.043	journal	January 2018
Self-Assembled Multimeric-Enzyme Nanoreactor for Robust and Efficient Biocatalysis Yin, Liang; Guo, Xiang; Liu, Lu ACS Biomaterials Science & Engineering, Vol. 4, Issue 6 https://doi.org/10.1021/acsbiomaterials.8b00279	journal	May 2018
Effects of severe plastic deformation on pre-osteoblast cell behavior and proliferation on AISI 304 and Ti-6Al-4V metallic substrates Tevlek, Atakan; Aydin, Halil Murat; Maleki, Erfan Surface and Coatings Technology, Vol. 366 https://doi.org/10.1016/j.surfcoat.2019.03.034	journal	May 2019
Micro/nano-structure leads to super strength and excellent plasticity in nanostructured 304 stainless steel Sheng, Jie; Wei, Jiafu; Li, Zhengning Journal of Materials Research and Technology, Vol. 17 https://doi.org/10.1016/j.jmrt.2021.12.117	journal	March 2022
Evaluation of the resistance of steel–concrete adhesive connection in reinforced concrete beams using guided wave propagation Zima, B.; Kędra, R. Archives of Civil and Mechanical Engineering, Vol. 20, Issue 1 https://doi.org/10.1007/s43452-019-0008-6	journal	December 2019
Thermal stability of ultrafine-grained austenitic stainless steels Etienne, A.; Radiguet, B.; Genevois, C. Materials Science and Engineering: A, Vol. 527, Issue 21-22 https://doi.org/10.1016/j.msea.2010.05.049	journal	August 2010
Recent advances in the kinetics of normal/abnormal grain growth: a review Najafkhani, Fateme; Kheiri, Sara; Pourbahari, Bita Archives of Civil and Mechanical Engineering, Vol. 21, Issue 1 https://doi.org/10.1007/s43452-021-00185-8	journal	February 2021
Abnormal grain growth in AISI 304L stainless steel Shirdel, M.; Mirzadeh, H.; Parsa, M. H. Materials Characterization, Vol. 97 https://doi.org/10.1016/j.matchar.2014.08.022	journal	November 2014
Microstructural Evolution During Normal/Abnormal Grain Growth in Austenitic Stainless Steel Shirdel, Mohammad; Mirzadeh, Hamed; Habibi Parsa, Mohammad Metallurgical and Materials Transactions A, Vol. 45, Issue 11 https://doi.org/10.1007/s11661-014-2426-7	journal	July 2014
Effects of nanostructural hierarchy on the hardness and thermal stability of an austenitic stainless steel Jiang, Wei; Cao, Yang; Jiang, Yingda Journal of Materials Research and Technology, Vol. 12 https://doi.org/10.1016/j.jmrt.2021.02.100	journal	May 2021
Statically Recrystallized Microstructure and Texture of Heterogeneous Nanostructured SUS316LN Austenite Stainless Steels Miura, Hiromi; Kobayashi, Masakazu; Tsuji, Tomoki MATERIALS TRANSACTIONS, Vol. 63, Issue 3 https://doi.org/10.2320/matertrans.MT-M2021231	journal	March 2022
Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress Motallebi, Reza; Savaedi, Zeinab; Mirzadeh, Hamed Current Opinion in Solid State and Materials Science, Vol. 26, Issue 3 https://doi.org/10.1016/j.cossms.2022.100992	journal	June 2022
A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys Savaedi, Zeinab; Motallebi, Reza; Mirzadeh, Hamed Journal of Alloys and Compounds, Vol. 903 https://doi.org/10.1016/j.jallcom.2022.163964	journal	May 2022
Recrystallization and Grain Growth Behavior in Severe Cold-rolling Deformed SUS316L Steel under Anisothermal Annealing Condition Hirota, Noriaki; Yin, Fuxing; Inoue, Tadanobu ISIJ International, Vol. 48, Issue 4 https://doi.org/10.2355/isijinternational.48.475	journal	January 2008
Recrystallization and grain growth of a nano/ultrafine structured austenitic stainless steel during annealing under high hydrostatic pressure Krawczynska, Agnieszka Teresa; Gierlotka, Stanislaw; Suchecki, Przemyslaw Journal of Materials Science, Vol. 53, Issue 16 https://doi.org/10.1007/s10853-018-2459-1	journal	May 2018
Copper precipitation behavior and mechanical properties of Cu-bearing 316L austenitic stainless steel: A comprehensive cross-correlation study Xi, Tong; Babar Shahzad, M.; Xu, Dake Materials Science and Engineering: A, Vol. 675 https://doi.org/10.1016/j.msea.2016.08.058	journal	October 2016
Coherent precipitation of copper in Super304H austenite steel Bai, J. W.; Liu, P. P.; Zhu, Y. M. Materials Science and Engineering: A, Vol. 584 https://doi.org/10.1016/j.msea.2013.06.082	journal	November 2013
Ostwald ripening in multicomponent alloys Umantsev, A.; Olson, G. B. Scripta Metallurgica et Materialia, Vol. 29, Issue 8 https://doi.org/10.1016/0956-716X(93)90191-T	journal	October 1993
Static Recrystallization Behavior and Mechanical Properties of Heterogeneous Nanostructured Duplex Phase Stainless Steel Miura, Hiromi; Kobayashi, Masakazu; Watanabe, Chihiro MATERIALS TRANSACTIONS, Vol. 61, Issue 2 https://doi.org/10.2320/matertrans.MT-M2019302	journal	February 2020
Elucidating the Effect of Alloying Elements on the Behavior of Austenitic Stainless Steels at Elevated Temperatures Naghizadeh, Meysam; Mirzadeh, Hamed Metallurgical and Materials Transactions A, Vol. 47, Issue 12 https://doi.org/10.1007/s11661-016-3764-4	journal	September 2016
Description of the kinetics of normal and abnormal grain growth in austenitic stainless steel Mizera, Jarosław; Wyrzykowski, Jerzy W.; Kurzydłowski, Krzysztof J. Materials Science and Engineering: A, Vol. 104 https://doi.org/10.1016/0025-5416(88)90417-X	journal	October 1988
Effect of Nb Microalloying on Reversion and Grain Growth in a High-Mn 204Cu Austenitic Stainless Steel Kisko, Anna; Talonen, Juho; Porter, David Arthur ISIJ International, Vol. 55, Issue 10 https://doi.org/10.2355/isijinternational.ISIJINT-2015-156	journal	January 2015
Static Grain Growth in an Austenitic Stainless Steel Subjected to Intense Plastic Straining Tikhonova, Marina; Belyakov, Andrey; Kaibyshev, Rustam Materials Science Forum, Vol. 783-786 https://doi.org/10.4028/www.scientific.net/MSF.783-786.1021	journal	May 2014
Level-Set Modeling of Grain Growth in 316L Stainless Steel under Different Assumptions Regarding Grain Boundary Properties Murgas, Brayan; Flipon, Baptiste; Bozzolo, Nathalie Materials, Vol. 15, Issue 7 https://doi.org/10.3390/ma15072434	journal	March 2022
Phase Field Modelling of Abnormal Grain Growth Liu, Ying; Militzer, Matthias; Perez, Michel Materials, Vol. 12, Issue 24 https://doi.org/10.3390/ma12244048	journal	December 2019
Critical assessment 30: Grain growth – Unresolved issues Rios, P. R.; Zöllner, D. Materials Science and Technology, Vol. 34, Issue 6 https://doi.org/10.1080/02670836.2018.1434863	journal	February 2018
Effect of plastic deformation on the magnetic properties of selected austenitic stainless steels Oršulová, Tatiana; Palček, Peter; Kúdelčík, Jozef Production Engineering Archives, Vol. 14, Issue 14 https://doi.org/10.30657/pea.2017.14.04	journal	March 2017
The clinical significance of a small focus of well-differentiated carcinoma at prostate biopsy Hoedemaeker, R. F.; van der Kwast, T. H.; Schroder, F. H. BJU International, Vol. 92, Issue s2 https://doi.org/10.1111/j.1465-5101.2003.04406.x	journal	December 2003
Magnetic properties and microstructural characterization of cold-rolled and annealed 317L austenitic stainless steel Sandim, M. J. R.; Mauro, V.; Tavares, S. S. M. Journal of Magnetism and Magnetic Materials, Vol. 539 https://doi.org/10.1016/j.jmmm.2021.168336	journal	December 2021
Magnetic properties of the UNS S39205 duplex stainless steel Tavares, S. S. M.; Pedrosa, P. D. S.; Teodósio, J. R. Journal of Alloys and Compounds, Vol. 351, Issue 1-2 https://doi.org/10.1016/S0925-8388(02)01076-9	journal	March 2003
Effects of strain-induced martensite and its reversion on the magnetic properties of AISI 201 austenitic stainless steel Souza Filho, I. R.; Sandim, M. J. R.; Cohen, R. Journal of Magnetism and Magnetic Materials, Vol. 419 https://doi.org/10.1016/j.jmmm.2016.06.027	journal	December 2016
Magnetism of Stainless Steel 304 Due to Cold Rolling Mubarok, Naila; Notonegoro, Hamdan Akbar FLYWHEEL : Jurnal Teknik Mesin Untirta https://doi.org/10.36055/fwl.v0i0.12567	journal	December 2021
Change of magnetic properties in austenitic stainless steels due to plastic deformation Oršulová, Tatiana; Palček, Peter; Roszak, Marek Procedia Structural Integrity, Vol. 13 https://doi.org/10.1016/j.prostr.2018.12.352	journal	January 2018
Magnetic phase quantification of the UNS S32750 superduplex stainless steel Tavares, S. S. M.; Pardal, J. M.; de Souza, J. A. Journal of Alloys and Compounds, Vol. 416, Issue 1-2 https://doi.org/10.1016/j.jallcom.2005.09.006	journal	June 2006
Magnetic detection of sigma phase in duplex stainless steel UNS S31803 Tavares, S. S. M.; Pardal, J. M.; Guerreiro, J. L. Journal of Magnetism and Magnetic Materials, Vol. 322, Issue 17 https://doi.org/10.1016/j.jmmm.2010.02.055	journal	September 2010
Magnetic Study of Martensitic Transformation in Austenitic Stainless Steel by Low Field Hysteresis Loops Analysis Zhang, Lefu AIP Conference Proceedings https://doi.org/10.1063/1.1916858	conference	January 2005
Effects of precipitated phases on the magnetic properties of 2304 duplex stainless steel Alinejad, Hossein; Abbasi, Majid Journal of Magnetism and Magnetic Materials, Vol. 537 https://doi.org/10.1016/j.jmmm.2021.168244	journal	November 2021
Breaking Material Property Trade-offs via Macrodesign of Microstructure Mao, Qingzhong; Zhang, Yusheng; Liu, Jizi Nano Letters, Vol. 21, Issue 7 https://doi.org/10.1021/acs.nanolett.1c00451	journal	March 2021
Machine Learning Approach to Design High Entropy Alloys with Heterogeneous Grain Structures Li, Li; Xie, Baobin; Fang, Qihong Metallurgical and Materials Transactions A, Vol. 52, Issue 2 https://doi.org/10.1007/s11661-020-06099-z	journal	January 2021

Similar Records

Direct Observation of Sample Dynamics in the Gaseous Environment: A Perspective on Current Trends and Future Directions of In Situ Gas Cell Transmission Electron Microscopy

Journal Article · 2023 · Journal of Physical Chemistry. C · OSTI ID:2422142

De Alwis Goonatilleke, Manisha; Thomas, Melonie P.; Ullah, Ahamed; +2 more

Combustion synthesis of zero-, one-, two- and three-dimensional nanostructures: Current trends and future perspectives

Journal Article · 2017 · Progress in Energy and Combustion Science · OSTI ID:1538706

Nersisyan, Hayk H.; Lee, Jong Hyeon; Ding, Jin-Rui; +3 more

Combustion synthesis of zero-, one-, two- and three-dimensional nanostructures: Current trends and future perspectives

Journal Article · 2017 · Progress in Energy and Combustion Science · OSTI ID:1550026

Nersisyan, Hayk H.; Lee, Jong Hyeon; Ding, Jin-Rui; +3 more

Related Subjects

Materials Science
Physics