Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

High-temperature fatigue crack growth under transient overloading: application to Alloy 617

Journal Article · · International Journal of Fracture

Not provided.

Research Organization:
Purdue Univ., West Lafayette, IN (United States); Oregon State Univ., Corvallis, OR (United States)
Sponsoring Organization:
USDOE Office of Fossil Energy (FE)
DOE Contract Number:
FE0011796; NE0000722
OSTI ID:
1976673
Journal Information:
International Journal of Fracture, Vol. 232, Issue 1; ISSN 0376-9429
Publisher:
Springer
Country of Publication:
United States
Language:
English

References (61)

Temperature and Load Interaction Effects on the Fatigue Crack Growth Rate and Fracture Surface Morphology of IN100 Superalloy April 2012
Cyclic and time-dependent crack growth mechanisms in Alloy 617 at 800 °C November 2018
Creep relaxation of stress around a crack tip January 1981
Threshold Stress Creep Behavior of Alloy 617 at Intermediate Temperatures March 2014
A cohesive zone model for fatigue and creep–fatigue crack growth in single crystal superalloys May 2009
Void Growth and Collapse in Viscous Solids January 1982
A Grain Boundary Fracture Model for Predicting Dynamic Embrittlement and Oxidation-Induced Cracking in Superalloys March 2015
Experimental and modeling results of creep–fatigue life of Inconel 617 and Haynes 230 at 850°C January 2013
Fatigue crack closure under cyclic tension July 1970
Analysis of high-strain-rate elastic-plastic crack growth January 1986
Hold-time effect of a single overload on crack retardation at elevated temperature January 1979
High temperature fatigue crack growth behaviour of Inconel 718 under hold time and overload conditions March 2013
Transient crack growth under creep conditions January 1986
Time-Dependent Crack Growth in a Heat-Resistant Alloy Inconel 617 April 1993
The asymptotic stress and strain field near the tip of a growing crack under creep conditions August 1981
Finite element simulation of creep-fatigue crack growth behavior for P91 steel at 625 °C considering creep-fatigue interaction May 2017
A diffusion-based approach for modelling crack tip behaviour under fatigue-oxidation conditions September 2018
General remarks on cyclic cohesive zone models November 2015
Characterization of near tip stress and deformation fields in creeping solids March 1988
Creep crack growth by grain boundary cavitation: crack tip fields and crack growth rates under transient conditions December 1988
Fatigue crack growth retardation behavior of in-100 at elevated temperature January 1979
Creep–Environment Interactions in Dwell-Fatigue Crack Growth of Nickel Based Superalloys February 2014
Thermal–mechanical stress analysis of pressurized water reactor pressure vessel with/without a preexisting crack under grid load following conditions December 2016
Oxidation effects on the fatigue crack growth behaviour of alloy 718 at high temperature February 1997
The effects of overloads on sustained-load crack growth in a nickel-base superalloy: part I—analysis October 1991
The effects of overloads on sustained-load crack growth in a nickel-base superalloy: part II—experiments October 1991
Rate sensitivity of mixed mode interface toughness of dissimilar metallic materials: Studied at steady state February 2012
A Critical Analysis of Crack Propagation Laws December 1963
Overloads in ductile and brittle materials November 2005
A closure model for predicting crack growth under creep-fatigue loading August 2019
Plastic strain gradients and transient fatigue crack growth: A computational study March 2019
Influence of strain rate sensitivity on localization and void coalescence February 2020
A Review on Current Status of Alloys 617 and 230 for Gen IV Nuclear Reactor Internals and Heat Exchangers 1 May 2009
Tensile Cracks in Creeping Solids January 1980
Fatigue and creep crack growth of Alloy 800 and Alloy 617 at high temperatures December 1992
An irreversible cohesive zone model for interface fatigue crack growth simulation January 2003
On the creep crack growth prediction by a local approach January 1986
Influence of overloads on dwell time fatigue crack growth in Inconel 718 August 2014
Analysis of overload effects and related phenomena September 1999
Separating plasticity-induced closure and residual stress contributions to fatigue crack retardation following an overload January 2017
Creep and creep–fatigue crack growth February 2015
Accounting for crack tip cyclic plasticity and creep reversal in estimating ( C t ) avg during creep‐fatigue crack growth June 2019
The significance of crack closure under high temperature fatigue crack growth with hold periods January 1989
Stationary and propagating cracks in a strain gradient visco-plastic solid September 2016
Mechanical behavior of crystalline solids at elevated temperature January 1968
A numerical study of transient fatigue crack growth by use of an irreversible cohesive zone model September 2004
Damage factors and upper bounds for interactive creep-fatigue crack growth December 2008
Load interaction effects during fatigue crack growth under variable amplitude loading-a literature review. Part II: qualitative interpretation October 1999
Void growth versus void collapse in a creeping single crystal May 2013
A damage-based cohesive zone model of intergranular crack growth in a nickel-based superalloy December 2012
Transient crack growth in a viscoplastic solid October 1993
Ratchetting strain as a driving force for fatigue crack growth January 2013
A multiaxial creep-damage model for creep crack growth considering cavity growth and microcrack interaction June 2014
Creep crack growth by grain boundary cavitation under monotonic and cyclic loading November 2017
Environmentally enhanced creep crack growth by grain boundary cavitation under cyclic loading July 2018
Characterization of elevated temperature properties of heat exchanger and steam generator alloys October 2012
Updated Draft ASME Boiler and Pressure Vessel Code Case for Use of Alloy 617 for Construction of Nuclear Components for Section III Division 5 September 2018
Void nucleation by inclusion debonding in a crystal matrix January 1993
Effect of cyclic overload on the crack growth behavior during hold period at elevated temperature February 1993
High temperature indentation based property measurements of IN-617 September 2017
A viscoplastic study of crack-tip deformation and crack growth in a nickel-based superalloy at elevated temperature December 2008

Similar Records

A study on fatigue crack growth behavior subjected to a single tensile overload: Part II. Transfer of stress concentration and its role in overload-induced transient crack growth
Journal Article · 2011 · Acta Materialia · OSTI ID:1001304

Assessment of modelling methodologies for prediction of high-temperature creep-fatigue behaviour of Alloy 617
Journal Article · 2020 · International Journal of Pressure Vessels and Piping · OSTI ID:1809526

Cyclic and time-dependent crack growth mechanisms in Alloy 617 at 800 °C
Journal Article · 2018 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1613842

Related Subjects