Hole number effect on internal and discharged flow characteristics of diesel injector during transie

Atac, Omer Faruk; Moon, Seoksu; Huang, Weidi; Ozawa, Daisuke

doi:10.1016/j.flowmeasinst.2022.102252

Hole number effect on internal and discharged flow characteristics of diesel injector during transie

Journal Article · 30 November 2022 · Flow Meas. Instr.

DOI:https://doi.org/10.1016/j.flowmeasinst.2022.102252· OSTI ID:1901185

Atac, Omer Faruk; Moon, Seoksu; Huang, Weidi; Ozawa, Daisuke

Research Organization:: Advanced Photon Source (APS), Argonne National Laboratory (ANL), Argonne, IL (US)

Sponsoring Organization:: DOE - Office Of Science; FOREIGN

OSTI ID:: 1901185

Journal Information:: Flow Meas. Instr., Journal Name: Flow Meas. Instr. Vol. 88

Country of Publication:: United States

Language:: ENGLISH

References (53)

Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics Payri, R.; Garcia, J.; Salvador, F. Fuel, Vol. 84, Issue 5 https://doi.org/10.1016/j.fuel.2004.10.009	journal	March 2005
An investigation of string cavitation in a true-scale fuel injector flow geometry at high pressure Reid, B. A.; Hargrave, G. K.; Garner, C. P. Physics of Fluids, Vol. 22, Issue 3 https://doi.org/10.1063/1.3372174	journal	March 2010
Vortex flow and cavitation in diesel injector nozzles Andriotis, A.; Gavaises, M.; Arcoumanis, C. Journal of Fluid Mechanics, Vol. 610 https://doi.org/10.1017/S0022112008002668	journal	August 2008
A Numerical Study of the Influence of Diesel Nozzle Geometry on the Inner Cavitating Flow Payri, R.; Margot, X.; Salvador, F. J. SAE 2002 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2002-01-0215	conference	March 2002
Hole number effect on spray dynamics of multi-hole diesel nozzles: An observation from three- to nine-hole nozzles Huang, Weidi; Moon, Seoksu; Gao, Ya Experimental Thermal and Fluid Science, Vol. 102 https://doi.org/10.1016/j.expthermflusci.2018.12.022	journal	April 2019
String flash-boiling in gasoline direct injection simulations with transient needle motion Baldwin, E. T.; Grover, R. O.; Parrish, S. E. International Journal of Multiphase Flow, Vol. 87 https://doi.org/10.1016/j.ijmultiphaseflow.2016.09.004	journal	December 2016
The use of micro-orifice nozzles and swirl in a small HSDI engine operating at a late split-injection LTC regime Benajes, J.; Molina, S.; De Rudder, K. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 220, Issue 12 https://doi.org/10.1243/09544070JAUTO383	journal	December 2006
Jet-Jet and Jet-Wall Interactions of Transient Jets from Multi-Hole Injectors Abraham, J.; Khan, A.; Magi, V. SAE Technical Paper Series https://doi.org/10.4271/1999-01-0513	conference	March 1999
Comparison of In-Nozzle Flow Characteristics of Naphtha and N-Dodecane Fuels Torelli, Roberto; Som, Sibendu; Pei, Yuanjiang WCX™ 17: SAE World Congress Experience, SAE Technical Paper Series https://doi.org/10.4271/2017-01-0853	conference	April 2017
Investigation of Cavitation in a Vertical Multi-Hole Injector Arcoumanis, C.; Flora, H.; Gavaises, M. International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/1999-01-0524	conference	March 1999
Experimental investigation on the effects of nozzle-hole number on combustion and emission characteristics of ethanol/diesel dual-fuel engine Dong, Shijun; Yang, Can; Ou, Biao Fuel, Vol. 217 https://doi.org/10.1016/j.fuel.2017.12.024	journal	April 2018
Characteristics of a Common Rail Diesel Injection System under Pilot and Post Injection Modes Henein, N. A.; Lai, Ming-Chia; Singh, I. P. SAE Technical Paper Series https://doi.org/10.4271/2002-01-0218	conference	March 2002
Study of the influence of the needle lift on the internal flow and cavitation phenomenon in diesel injector nozzles by CFD using RANS methods Salvador, F. J.; Martínez-López, J.; Caballer, M. Energy Conversion and Management, Vol. 66 https://doi.org/10.1016/j.enconman.2012.10.011	journal	February 2013
Study of combustion, performance and emissions of a diesel engine fueled with ternary fuel in blended and fumigation modes Ghadikolaei, Meisam Ahmadi; Cheung, Chun Shun; Yung, Ka-Fu Fuel, Vol. 235 https://doi.org/10.1016/j.fuel.2018.07.089	journal	January 2019
Influence of Fuel Injector Nozzle Geometry on Internal and External Flow Characteristics Koo, Ja Ye; Hong, Seung Tae; Shakal, Joseph S. SAE Technical Paper Series https://doi.org/10.4271/970354	conference	February 1997
Cavitation Inside Multi-hole Injectors for Large Diesel Engines and Its Effect on the Near-nozzle Spray Structure Gavaises, M.; Andriotis, A. SAE 2006 World Congress & Exhibition, SAE Technical Paper Series https://doi.org/10.4271/2006-01-1114	conference	April 2006
On the formation of string cavitation inside fuel injectors Reid, B. A.; Gavaises, M.; Mitroglou, N. Experiments in Fluids, Vol. 55, Issue 1 https://doi.org/10.1007/s00348-013-1662-8	journal	January 2014
Biodiesel effects on transient needle motion and near-exit flow characteristics of a high-pressure diesel injector Moon, Seoksu; Tsujimura, Taku; Gao, Yuan International Journal of Engine Research, Vol. 15, Issue 4 https://doi.org/10.1177/1468087413497951	journal	September 2013
Effect of Off-Axis Needle Motion on Internal Nozzle and Near Exit Flow in a Multi-Hole Diesel Injector Battistoni, Michele; Xue, Qingluan; Som, Sibendu SAE International Journal of Fuels and Lubricants, Vol. 7, Issue 1 https://doi.org/10.4271/2014-01-1426	journal	April 2014
First observation and characterization of vortex flow in steel micronozzles for high-pressure diesel injection Moon, Seoksu; Huang, Weidi; Wang, Jin Experimental Thermal and Fluid Science, Vol. 105 https://doi.org/10.1016/j.expthermflusci.2019.04.018	journal	July 2019
Analysis of the Flow in the Nozzle of a Vertical Multi-Hole Diesel Engine Injector Arcoumanis, C.; Gavaises, M.; Nouri, J. M. International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/980811	conference	February 1998
The Influence of Injection Parameters on Diesel Spray Characteristics Arrègle, Jean; Pastor, José V.; Ruiz, Santiago International Congress & Exposition, SAE Technical Paper Series https://doi.org/10.4271/1999-01-0200	conference	March 1999
Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve Emissions, Noise and Fuel Economy Trade-Off in Low CR Engines Mendez, Sylvain; Thirouard, Benoist SAE International Journal of Fuels and Lubricants, Vol. 1, Issue 1 https://doi.org/10.4271/2008-01-1329	journal	April 2008
Coupled Eulerian Internal Nozzle Flow and Lagrangian Spray Simulations for GDI Systems Saha, Kaushik; Quan, Shaoping; Battistoni, Michele WCX™ 17: SAE World Congress Experience, SAE Technical Paper Series https://doi.org/10.4271/2017-01-0834	conference	April 2017
Computational investigation of diesel nozzle internal flow during the complete injection event Salvador, F. J.; De la Morena, J.; Bracho, G. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, Issue 3 https://doi.org/10.1007/s40430-018-1074-z	journal	February 2018
Characterization of string cavitation in large-scale Diesel nozzles with tapered holes Gavaises, M.; Andriotis, A.; Papoulias, D. Physics of Fluids, Vol. 21, Issue 5 https://doi.org/10.1063/1.3140940	journal	May 2009
The Influence of Pilot and Split-Main Injection Parameters on Diesel Emissions and Fuel Consumption Shayler, P. J.; Brooks, T. D.; Pugh, G. J. SAE Technical Paper Series https://doi.org/10.4271/2005-01-0375	conference	April 2005
Evaluation of Shot-to-Shot In-Nozzle Flow Variations in a Heavy-Duty Diesel Injector Using Real Nozzle Geometry Torelli, Roberto; Matusik, Katarzyna E.; Nelli, Kyle C. SAE International Journal of Fuels and Lubricants, Vol. 11, Issue 4 https://doi.org/10.4271/2018-01-0303	journal	February 2018
Effect of Multi-Injection Strategy on Cavitation Development in Diesel Injector Nozzle Holes Roth, H.; Giannadakis, E.; Gavaises, M. SAE Technical Paper Series https://doi.org/10.4271/2005-01-1237	conference	April 2005
Analysis of the Influence of Diesel Nozzle Geometry in the Injection Rate Characteristic Benajes, J.; Pastor, J. V.; Payri, R. Journal of Fluids Engineering, Vol. 126, Issue 1 https://doi.org/10.1115/1.1637636	journal	January 2004
Numerical study on flash-boiling spray of multicomponent fuel Kawano, Daisuke; Ishii, Hajime; Suzuki, Hisakazu Heat Transfer—Asian Research, Vol. 35, Issue 5 https://doi.org/10.1002/htj.20117	journal	January 2006
The internal flow of diesel fuel injector nozzles: A review Schmidt, D. P.; Corradini, M. L. International Journal of Engine Research, Vol. 2, Issue 1 https://doi.org/10.1243/1468087011545316	journal	February 2001
Effect of the Injector Nozzle Hole Diameter and Number on the Spray Characteristics and the Combustion Performance in Medium-Speed Diesel Marine Engines Kim, Byong-Seok; Yoon, Wook Hyeon; Ryu, Sung Hyup SAE Technical Paper Series https://doi.org/10.4271/2005-01-3853	conference	October 2005
Large-eddy simulation of cavitating nozzle flow and primary jet break-up Örley, F.; Trummler, T.; Hickel, S. Physics of Fluids, Vol. 27, Issue 8 https://doi.org/10.1063/1.4928701	journal	August 2015
Large-eddy simulation analysis of the influence of the needle lift on the cavitation in diesel injector nozzles Desantes, José María; Salvador, Francisco Javier; Carreres, Marcos Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 229, Issue 4 https://doi.org/10.1177/0954407014542627	journal	August 2014
Highly resolved Eulerian simulations of fuel spray transients in single and multi-hole injectors: Nozzle flow and near-exit dynamics Battistoni, Michele; Som, Sibendu; Powell, Christopher F. Fuel, Vol. 251 https://doi.org/10.1016/j.fuel.2019.04.076	journal	September 2019
Experimental Characterization of Internal Nozzle flow and Diesel Spray Behavior. part i: Nonevaporative Conditions Desantes, J. M.; Payri, R.; Pastor, J. M. Atomization and Sprays, Vol. 15, Issue 5 https://doi.org/10.1615/AtomizSpr.v15.i5.20	journal	January 2005
Large-Eddy Simulation of turbulent, cavitating fuel flow inside a 9-hole Diesel injector including needle movement Örley, Felix; Hickel, Stefan; Schmidt, Steffen J. International Journal of Engine Research, Vol. 18, Issue 3 https://doi.org/10.1177/1468087416643901	journal	July 2016
Influence of the Diesel Injector Hole Geometry on the Flow Conditions Emerging from the Nozzle Brusiani, Federico; Falfari, Stefania; Pelloni, Piero Energy Procedia, Vol. 45 https://doi.org/10.1016/j.egypro.2014.01.080	journal	January 2014
Characterization of the Near-Field Spray and Internal Flow of Single-Hole and Multi-Hole Sac Nozzles using Phase Contrast X-Ray Imaging and CFD Lai, Ming-Chia; Zheng, Yi; Xie, Xing-Bin SAE International Journal of Engines, Vol. 4, Issue 1 https://doi.org/10.4271/2011-01-0681	journal	April 2011
Effect of the number and position of nozzle holes on in- and near-nozzle dynamic characteristics of diesel injection Moon, Seoksu; Gao, Yuan; Park, Suhan Fuel, Vol. 150 https://doi.org/10.1016/j.fuel.2015.01.097	journal	June 2015
Study of the Influence of Geometrical and Injection Parameters on Diesel Sprays Characteristics in Isothermal Conditions Desantes, J. M.; Payri, R.; Salvador, F. J. SAE Technical Paper Series https://doi.org/10.4271/2005-01-0913	conference	April 2005
Effects of the swirl ratio and injector hole number on the combustion and emission characteristics of a light duty diesel engine Yoon, Sungjun; Lee, Seungpil; Kwon, Hyuckmo Applied Thermal Engineering, Vol. 142 https://doi.org/10.1016/j.applthermaleng.2018.06.076	journal	September 2018
Multi-hole Injectors for DISI Engines: Nozzle Hole Configuration Influence on Spray Formation Dahlander, Petter; Lindgren, Ronny SAE International Journal of Engines, Vol. 1, Issue 1 https://doi.org/10.4271/2008-01-0136	journal	April 2008
Experimental investigation on the effect of injector hole number on engine performance and particle number emissions in a light-duty diesel engine Mohiuddin, Khawar; Kwon, Heesun; Choi, Minhoo International Journal of Engine Research, Vol. 22, Issue 8 https://doi.org/10.1177/1468087420934605	journal	July 2020
Cavitation in Diesel Fuel Injector Nozzles and its Influence on Atomization and Spray Sun, Yubiao; Guan, Zhiqiang; Hooman, Kamel Chemical Engineering & Technology, Vol. 42, Issue 1 https://doi.org/10.1002/ceat.201800323	journal	November 2018
Near-field dynamics of high-speed diesel sprays: Effects of orifice inlet geometry and injection pressure Moon, Seoksu; Gao, Yuan; Wang, Jin Fuel, Vol. 133 https://doi.org/10.1016/j.fuel.2014.05.024	journal	October 2014
Near-nozzle dynamics of diesel spray under varied needle lifts and its prediction using analytical model Huang, Weidi; Moon, Seoksu; Ohsawa, Katsuyuki Fuel, Vol. 180 https://doi.org/10.1016/j.fuel.2016.04.042	journal	September 2016
Eccentric needle motion effect on near-nozzle dynamics of diesel spray Huang, Weidi; Moon, Seoksu; Gao, Ya Fuel, Vol. 206 https://doi.org/10.1016/j.fuel.2017.06.012	journal	October 2017
The Effects of Diesel Injector Needle Motion on Spray Structure Powell, C. F.; Kastengren, A. L.; Liu, Z. Journal of Engineering for Gas Turbines and Power, Vol. 133, Issue 1 https://doi.org/10.1115/1.4001073	journal	September 2010
Diesel Combustion with Reduced Nozzle Orifice Diameter Bergstrand, Pär; Denbratt, Ingemar SAE Technical Paper Series https://doi.org/10.4271/2001-01-2010	conference	May 2001
Effect of the number of fuel injector holes on characteristics of combustion and emissions in a diesel engine Lee, B. H.; Song, J. H.; Chang, Y. J. International Journal of Automotive Technology, Vol. 11, Issue 6 https://doi.org/10.1007/s12239-010-0093-2	journal	December 2010
Characterization of Internal Flow and Spray Behaviors of Hole-Type Nozzle under Tiny and Normal Injection Quantity Conditions for Diesel Engine Dong, PengBo; Nishida, Keiya; Inaba, Takuya SAE International Journal of Fuels and Lubricants, Vol. 9, Issue 1 https://doi.org/10.4271/2016-01-0862	journal	April 2016

Similar Records

Hole number effect on internal and discharged flow characteristics of diesel injector during transient operation

Journal Article · 2022 · Flow Measurement and Instrumentation · OSTI ID:1961101

Effect of asymmetric structural characteristics of multi-hole marine diesel injectors on internal cavitation patterns and flow characteristics: A numerical study

Journal Article · 2020 · Fuel · OSTI ID:1810923

Influence of fuel properties on internal nozzle flow development in a multi-hole diesel injector

Journal Article · 2017 · Fuel · OSTI ID:1413755

Hole number effect on internal and discharged flow characteristics of diesel injector during transie

Citation Formats

References (53)

Similar Records

Related Subjects