Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

X-ray computed tomography analysis of pore deformation in IN718 made with directed energy deposition

Journal Article · · Int. J. Solids Struct.

Research Organization:
Argonne National Laboratory (ANL), Argonne, IL (United States). Advanced Photon Source (APS)
Sponsoring Organization:
DOE - Office Of Science; National Science Foundation (NSF)
OSTI ID:
1901161
Journal Information:
Int. J. Solids Struct., Vol. 256
Country of Publication:
United States
Language:
ENGLISH

References (53)

δ Phase precipitation in Inconel 718 and associated mechanical properties journal January 2017
AMB2018-04: Benchmark Physical Property Measurements for Powder Bed Fusion Additive Manufacturing of Polyamide 12 journal August 2019
Relating additively manufactured part tensile properties to thermal metrics journal January 2021
Thermal effect on clad dimension for laser deposited Inconel 718 journal August 2017
Tracking Defects and Microstructural Heterogeneities in Meso-Scale Tensile Specimens Excised from Additively Manufactured Parts journal October 2019
The mechanical and microstructural characteristics of laser-deposited IN718 journal December 2005
Damage evolution and failure mechanisms in additively manufactured stainless steel journal January 2016
Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization journal September 2017
Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights journal February 2020
A method for measuring single-crystal elastic moduli using high-energy X-ray diffraction and a crystal-based finite element model journal October 2010
Data-Driven Microstructure and Microhardness Design in Additive Manufacturing Using a Self-Organizing Map journal August 2019
Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders journal December 2020
Mechanical properties of hybrid additively manufactured Inconel 718 parts created via thermal control after secondary treatment processes journal May 2021
Quantification of location-dependence in a large-scale additively manufactured build through experiments and micromechanical modeling journal September 2019
Additive manufacturing in the context of structural integrity journal January 2017
Influence of interlayer dwell time on the microstructure of Inconel 718 Laser Cladded components journal August 2020
Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension: As-built and heat treated conditions journal June 2021
Laser Additive Manufacturing using directed energy deposition of Inconel-718 wall structures with tailored characteristics journal August 2019
Image-based multiscale modeling with spatially varying microstructures from experiments: Demonstration with additively manufactured metal in fatigue and fracture journal May 2021
Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography journal June 2020
Deformation Behavior and Microstructure of Ti6Al4V Manufactured by SLM journal January 2016
Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components journal July 2013
Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels journal December 2011
Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing journal August 2017
Heterogenous void growth revealed by in situ 3-D X-ray microtomography using automatic cavity tracking journal January 2014
Cross Polarization for Improved Digital Image Correlation journal February 2016
Predicting the effective mechanical property of heterogeneous materials by image based modeling and deep learning journal April 2019
Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation journal May 2010
The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718 journal March 2011
Recrystallization and its influence on microstructures and mechanical properties of laser solid formed nickel base superalloy Inconel 718 journal March 2011
Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography journal October 2008
Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests journal December 2007
Initiation and propagation of complex 3D networks of cracks in heterogeneous quasi-brittle materials: Direct comparison between in situ testing-microCT experiments and phase field simulations journal October 2016
Ultrasonic Vibration-Assisted Laser Engineered Net Shaping of Inconel 718 Parts: Microstructural and Mechanical Characterization journal April 2018
In situ Imaging of Materials using X-ray Tomography journal August 2018
Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718 journal August 2009
Comparison of Microstructural Response to Heat Treatment of Inconel 718 Prepared by Three Different Metal Additive Manufacturing Processes journal January 2020
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering journal January 2015
In-situ stress and strain measurements around cracks using synchrotron X-ray diffraction journal July 2011
In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction journal May 2006
The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing journal February 2019
Three-dimensional strain mapping using in situ X-ray synchrotron microtomography journal July 2011
Defects-dictated tensile properties of selective laser melted Ti-6Al-4V journal November 2018
Evaluation of a modified void descriptor function to uniquely characterize pore networks and predict fracture-related properties in additively manufactured metals journal January 2022
Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials journal July 2008
Nondestructive quantitative characterisation of material phases in metal additive manufacturing using multi-energy synchrotron X-rays microtomography journal December 2019
An integrated process–structure–property modeling framework for additive manufacturing journal September 2018
Self-consistent clustering analysis for multiscale modeling at finite strains journal June 2019
Influence of process parameters and heat treatments on the microstructures and dynamic mechanical behaviors of Inconel 718 superalloy manufactured by laser metal deposition journal April 2018
Microstructure development in a high-nickel austenitic stainless steel using EBSD during in situ tensile deformation journal January 2018
Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition journal January 2020
Study on microstructure and mechanical properties of laser rapid forming Inconel 718 journal April 2008
Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition journal May 2016