Production of gas-atomized powders of [(Fe[subscript 0.6]Co[subscript 0.4])[subscript 0.75]B[subscri

de Araujo Santana, Diego; Kiminami, Claudio Shyinti; Coury, Francisco Gil; Gargarella, Piter; Cava, Regis Daniel; Kaufman, Michael Joseph

doi:10.1016/j.jallcom.2022.167605

Production of gas-atomized powders of [(Fe[subscript 0.6]Co[subscript 0.4])[subscript 0.75]B[subscri

Journal Article · 31 December 2022 · J. Alloy Comp.

DOI:https://doi.org/10.1016/j.jallcom.2022.167605· OSTI ID:1901128

de Araujo Santana, Diego; Kiminami, Claudio Shyinti; Coury, Francisco Gil; Gargarella, Piter; Cava, Regis Daniel; Kaufman, Michael Joseph

Research Organization:: Advanced Photon Source (APS), Argonne National Laboratory (ANL), Argonne, IL (US)

Sponsoring Organization:: DOE - Office Of Science; FOREIGN

OSTI ID:: 1901128

Journal Information:: J. Alloy Comp., Journal Name: J. Alloy Comp. Vol. 931

Country of Publication:: United States

Language:: ENGLISH

References (66)

Solidification progress and heat transfer analysis of gas-atomized alloy droplets during spray forming Lee, Eon-Sik; Ahn, S. Acta Metallurgica et Materialia, Vol. 42, Issue 9 https://doi.org/10.1016/0956-7151(94)90421-9	journal	September 1994
Thermodynamics, kinetics, and crystallization of Pt57.3Cu14.6Ni5.3P22.8 bulk metallic glass Legg, Benjamin A.; Schroers, Jan; Busch, Ralf Acta Materialia, Vol. 55, Issue 3 https://doi.org/10.1016/j.actamat.2006.09.024	journal	February 2007
Atomization and characterization of a glass forming alloy {(Fe0.6Co0.4)0.75B0.2Si0.05}96Nb4 Ciftci, N.; Ellendt, N.; von Bargen, R. Journal of Non-Crystalline Solids, Vol. 394-395 https://doi.org/10.1016/j.jnoncrysol.2014.03.023	journal	July 2014
Consolidation mechanism of aluminum-based amorphous alloy powders during warm extrusion Kawamura, Yoshihito; Inoue, Akihisa; Sasamori, Kenichiro Materials Science and Engineering: A, Vol. 181-182 https://doi.org/10.1016/0921-5093(94)90826-5	journal	May 1994
Influence of Small Content Elements Additions on the Glass Forming Ability of Zr-based Bulk Metallic Glasses Alloys Campos Neto, Nelson Delfino de; Paula, Wesley Marques de; Pereira, Flavio Soares Materials Research, Vol. 21, Issue 6 https://doi.org/10.1590/1980-5373-mr-2017-1088	journal	September 2018
A numerical study of oxidation behavior during reactive atomization and deposition Lin, Yaojun; Zhou, Yizhang; Lavernia, Enrique J. Metallurgical and Materials Transactions B, Vol. 35, Issue 6 https://doi.org/10.1007/s11663-004-0072-y	journal	December 2004
Fabrication, properties and applications of bulk glassy alloys in late transition metal-based systems Inoue, Akihisa; Shen, Baolong; Takeuchi, Akira Materials Science and Engineering: A, Vol. 441, Issue 1-2 https://doi.org/10.1016/j.msea.2006.02.416	journal	December 2006
Cooling rates in splat cooling Ruhl, Robert C. Materials Science and Engineering, Vol. 1, Issue 6 https://doi.org/10.1016/0025-5416(67)90013-4	journal	March 1967
Crystallization kinetics of Cu47Zr47Al6 and (Cu47Zr47Al6)99Sn1 bulk metallic glasses Rashidi, Reza; Malekan, Mehdi; Gholamipour, Reza Journal of Non-Crystalline Solids, Vol. 498 https://doi.org/10.1016/j.jnoncrysol.2018.06.042	journal	October 2018
The surface structure of gas-atomized metallic glass powders Yan, M.; Yu, P.; Kim, K. B. Scripta Materialia, Vol. 62, Issue 5 https://doi.org/10.1016/j.scriptamat.2009.11.013	journal	March 2010
Mechanical properties of amorphous alloy compacts prepared by a closed processing system Kawamura, Y.; Inoue, A.; Masumoto, T. Scripta Metallurgica et Materialia, Vol. 29, Issue 1 https://doi.org/10.1016/0956-716X(93)90248-Q	journal	July 1993
Cu-based bulk amorphous alloys prepared by consolidation of amorphous powders in the supercooled liquid region Kim, H. J.; Lee, J. K.; Shin, S. Y. Intermetallics, Vol. 12, Issue 10-11 https://doi.org/10.1016/j.intermet.2004.04.016	journal	October 2004
Consolidation of Fe-Based Metallic Glass Powders by Hot Pressing Santana, Diego de Araujo; Kiminami, Claudio Shyinti; Coury, Francisco Gil Materials Research, Vol. 22, Issue 2 https://doi.org/10.1590/1980-5373-mr-2018-0581	journal	January 2019
Stability and nucleation behavior of glass-forming Pd–Cu–Ni–P alloy with a critical cooling rate of 0.067 K/s Nishiyama, Nobuyuki; Inoue, Akihisa Intermetallics, Vol. 10, Issue 11-12 https://doi.org/10.1016/S0966-9795(02)00151-6	journal	November 2002
High Tensile Strength Bulk Glassy Alloy Zr₆₅Al₁₀Ni₁₀Cu₁₅ Prepared by Extrusion of Atomized Glassy Powder Kato, Hidemi; Kawamura, Yoshihito; Inoue, Akihisa Materials Transactions, JIM, Vol. 37, Issue 1 https://doi.org/10.2320/matertrans1989.37.70	journal	January 1996
Effect of thickness reduction on consolidation and crystallization of Cu based bulk metallic glass alloy during powder rolling in supercooled liquid region Park, E. S.; Huh, M. Y.; Kim, H. J. Journal of Alloys and Compounds, Vol. 504 https://doi.org/10.1016/j.jallcom.2010.02.140	journal	August 2010
Fabrication of bulk amorphous Fe67Co9.5Nd3Dy0.5B20 alloy by hot extrusion of ribbon and study of the magnetic properties Biswas, K.; Ram, S.; Roth, S. Journal of Materials Science, Vol. 41, Issue 11 https://doi.org/10.1007/s10853-005-5619-z	journal	April 2006
Corrosion resistance of Fe-based amorphous alloys Botta, W. J.; Berger, J. E.; Kiminami, C. S. Journal of Alloys and Compounds, Vol. 586 https://doi.org/10.1016/j.jallcom.2012.12.130	journal	February 2014
Iron-based bulk metallic glasses Suryanarayana, C.; Inoue, A. International Materials Reviews, Vol. 58, Issue 3 https://doi.org/10.1179/1743280412Y.0000000007	journal	April 2013
Viscosity and fragility of the supercooled liquids and melts from the Fe–Co–B–Si–Nb and Fe–Mo–P–C–B–Si glass-forming alloy systems Parthiban, R.; Stoica, M.; Kaban, I. Intermetallics, Vol. 66 https://doi.org/10.1016/j.intermet.2015.06.016	journal	November 2015
Preparation and characterization of the structure and corrosion behavior of wedge mold cast Fe43.2Co28.8B19.2Si4.8Nb4 bulk amorphous alloy Ríos, Carlos Triveño; de Souza, Juliana Sarango; Antunes, Renato Altobelli Journal of Alloys and Compounds, Vol. 682 https://doi.org/10.1016/j.jallcom.2016.05.014	journal	October 2016
Structures and mechanical properties of amorphous alloy compacts prepared in an inert atmosphere Takagi, M.; Kawamura, Y.; Imura, T. Journal of Materials Science, Vol. 27, Issue 4 https://doi.org/10.1007/BF01197648	journal	February 1992
Amorphous and nanocrystalline materials for applications as soft magnets McHenry, Michael E.; Willard, Matthew A.; Laughlin, David E. Progress in Materials Science, Vol. 44, Issue 4 https://doi.org/10.1016/S0079-6425(99)00002-X	journal	October 1999
Deformation behavior of Zr₆₅Al₁₀Ni₁₀Cu₁₅ glassy alloy with wide supercooled liquid region Kawamura, Yoshihito; Shibata, Tsutomu; Inoue, Akihisa Applied Physics Letters, Vol. 69, Issue 9 https://doi.org/10.1063/1.117413	journal	August 1996
Full strength compacts by extrusion of glassy metal powder at the supercooled liquid state Kawamura, Yoshihito; Kato, Hidemi; Inoue, Akihisa Applied Physics Letters, Vol. 67, Issue 14 https://doi.org/10.1063/1.114769	journal	October 1995
The viscosity of the Zr _46.75 Ti _8.25 Cu _7.5 Ni ₁₀ Be _27.5 bulk metallic glass forming alloy in the supercooled liquid Bakke, E.; Busch, R.; Johnson, W. L. Applied Physics Letters, Vol. 67, Issue 22 https://doi.org/10.1063/1.114891	journal	November 1995
Ti50Cu25Ni20Sn5 bulk metallic glass fabricated by powder consolidation Choi, P. P.; Kim, J. S.; Nguyen, O. T. H. Materials Letters, Vol. 61, Issue 23-24 https://doi.org/10.1016/j.matlet.2007.02.066	journal	September 2007
Ni59Zr20Ti16Si5 bulk amorphous alloy obtained by mechanical alloying and powder consolidation Oleszak, D.; Kolesnikov, D.; Kulik, T. Materials Science and Engineering: A, Vol. 449-451 https://doi.org/10.1016/j.msea.2006.02.270	journal	March 2007
Fabrication of Co40Fe22Nb8B30 bulk metallic glasses by consolidation of gas-atomized powders and their soft-magnetic properties Itoi, T.; Takamizawa, T.; Kawamura, Y. Scripta Materialia, Vol. 45, Issue 10 https://doi.org/10.1016/S1359-6462(01)01122-8	journal	November 2001
Al–La–Ni Amorphous Alloys with a Wide Supercooled Liquid Region Inoue, Akihisa; Zhang, Tao; Masumoto, Tsuyoshi Materials Transactions, JIM, Vol. 30, Issue 12 https://doi.org/10.2320/matertrans1989.30.965	journal	January 1989
Crystallization kinetics of Zr 60 Cu 25 Fe 5 Al 10 bulk metallic glass Peng, C.; Chen, Z. H.; Zhao, X. Y. Journal of Non-Crystalline Solids, Vol. 405 https://doi.org/10.1016/j.jnoncrysol.2014.08.030	journal	December 2014
Consolidation of the Cu46Zr42Al7Y5 amorphous ribbons and powder alloy by hot extrusion Melle, Ana Karla; Peres, Mauricio Mhirdaui; Bolfarini, Claudemiro Materials Research, Vol. 15, Issue 5 https://doi.org/10.1590/S1516-14392012005000095	journal	August 2012
Influence of mechanically milled powder and high pressure on spark plasma sintering of Mg–Cu–Gd metallic glasses Zheng, Baolong; Ashford, Dustin; Zhou, Yizhang Acta Materialia, Vol. 61, Issue 12 https://doi.org/10.1016/j.actamat.2013.04.011	journal	July 2013
Effects of extrusion conditions on mechanical properties in ZrAlNiCu glassy powder compacts Kawamura, Yoshihito; Kato, Hidemi; Inoue, Akihisa Materials Science and Engineering: A, Vol. 219, Issue 1-2 https://doi.org/10.1016/S0921-5093(96)10437-8	journal	November 1996
Synthesis of a bulk amorphous alloy by consolidation of the melt-spun amorphous ribbons under high pressure Zhou, F.; Zhang, X. H.; Lu, K. Journal of Materials Research, Vol. 13, Issue 3 https://doi.org/10.1557/JMR.1998.0100	journal	March 1998
Impact, recoil and splashing of molten metal droplets Aziz, Shiraz D.; Chandra, Sanjeev International Journal of Heat and Mass Transfer, Vol. 43, Issue 16 https://doi.org/10.1016/S0017-9310(99)00350-6	journal	August 2000
Quantitative phase analysis in Al86Ni8Y6 bulk glassy alloy synthesized by consolidating mechanically alloyed amorphous powder via spark plasma sintering Maurya, Ram S.; Sahu, Ashutosh; Laha, Tapas Materials & Design, Vol. 93 https://doi.org/10.1016/j.matdes.2015.12.129	journal	March 2016
Metallic glass matrix composites Qiao, Junwei; Jia, Haoling; Liaw, Peter K. Materials Science and Engineering: R: Reports, Vol. 100 https://doi.org/10.1016/j.mser.2015.12.001	journal	February 2016
Consolidation and mechanical properties of ball milled Zr50Cu50 glassy ribbons Scudino, S.; Venkataraman, S.; Stoica, M. Journal of Alloys and Compounds, Vol. 483, Issue 1-2 https://doi.org/10.1016/j.jallcom.2008.07.149	journal	August 2009
The world's biggest glassy alloy ever made Nishiyama, Nobuyuki; Takenaka, Kana; Miura, Haruko Intermetallics, Vol. 30 https://doi.org/10.1016/j.intermet.2012.03.020	journal	November 2012
Novel Cooling Rate Correlations in Molten Metal Gas Atomization Ciftci, N.; Ellendt, N.; Coulthard, G. Metallurgical and Materials Transactions B, Vol. 50, Issue 2 https://doi.org/10.1007/s11663-019-01508-0	journal	January 2019
Mechanical properties of ductile Fe-Ni-Zr and Fe-Ni-Zr (Nb or Ta) amorphous alloys containing fine crystalline particles Inoue, A.; Tomioka, H.; Masumoto, T. Journal of Materials Science, Vol. 18, Issue 1 https://doi.org/10.1007/BF00543821	journal	January 1983
Modeling fragmentation of plasma-sprayed particles impacting on a solid surface at room temperature McDonald, André; Xue, Michelle; Chandra, Sanjeev Comptes Rendus Mécanique, Vol. 335, Issue 5-6 https://doi.org/10.1016/j.crme.2007.05.006	journal	May 2007
Influence of spherical particles and interfacial stress distribution on viscous flow behavior of Ti‐Cu‐Ni‐Zr‐Sn bulk metallic glass composites Hong, Sung Hwan; Kim, Jeong Tae; Mun, Sang Chul Intermetallics, Vol. 91 https://doi.org/10.1016/j.intermet.2017.08.016	journal	December 2017
The Critical Cooling Rate of Fe-Based Mono-Sized Spherical Particles with Fully Glassy Phase Li, Ying; Dong, Wei; Fu, Yi Fan Advanced Materials Research, Vol. 509 https://doi.org/10.4028/www.scientific.net/AMR.509.185	journal	April 2012
Ti–Cu–Ni shape memory bulk metallic glass composites Gargarella, P.; Pauly, S.; Song, K. K. Acta Materialia, Vol. 61, Issue 1 https://doi.org/10.1016/j.actamat.2012.09.042	journal	January 2013
Consolidation of [(Fe_0.5Co_0.5)_0.75Si_0.05B_0.2]₉₆Nb₄ Metallic Glassy Powder by SPS Method Yodoshi, N.; Yamada, R.; Kawasaki, A. MATERIALS TRANSACTIONS, Vol. 50, Issue 9 https://doi.org/10.2320/matertrans.M2009093	journal	January 2009
Kinetics of crystal nucleation and growth in Pd77.5Cu6Si16.5 glass Kiminami, C. S.; Sahm, P. R. Acta Metallurgica, Vol. 34, Issue 11 https://doi.org/10.1016/0001-6160(86)90158-6	journal	November 1986
Consolidation of amorphous copper based powder by equal channel angular extrusion Robertson, J.; Im, J. -T.; Karaman, I. Journal of Non-Crystalline Solids, Vol. 317, Issue 1-2 https://doi.org/10.1016/S0022-3093(02)01995-6	journal	March 2003
Super-high strength of over 4000 MPa for Fe-based bulk glassy alloys in [(Fe1−xCox)0.75B0.2Si0.05]96Nb4 system Inoue, A.; Shen, B. L.; Chang, C. T. Acta Materialia, Vol. 52, Issue 14 https://doi.org/10.1016/j.actamat.2004.05.022	journal	August 2004
Microstructure Characterization and Kinetics of Crystallization Behavior of Tubular Spray Formed Fe_43.2Co_28.8B_19.2Si_4.8Nb₄ Bulk Metallic Glass* Cava, R. D.; Aliaga, L. C. R.; Rios, C. Trivenõ HTM Journal of Heat Treatment and Materials, Vol. 69, Issue 5 https://doi.org/10.3139/105.110236	journal	October 2014
Consolidation of Cu54Ni6Zr22Ti18 bulk amorphous alloy powders Kim, Taek-Soo; Lee, Jin-Kyu; Kim, Hwi-Jun Materials Science and Engineering: A, Vol. 402, Issue 1-2 https://doi.org/10.1016/j.msea.2005.04.044	journal	August 2005
Thermoplastic blow molding of metals Schroers, Jan; Hodges, Thomas M.; Kumar, Golden Materials Today, Vol. 14, Issue 1-2 https://doi.org/10.1016/S1369-7021(11)70018-9	journal	January 2011
Connecting, Assemblage and Electromechanical Shaping of Bulk Metallic Glasses Oliveira, M. de; Botta F., W. J.; Yavari, A. R. Materials Transactions, JIM, Vol. 41, Issue 11 https://doi.org/10.2320/matertrans1989.41.1501	journal	January 2000
Effective Method to Enhance the Glass-Forming Ability of Vitreloy 105 Containing High Oxygen Concentrations de Campos Neto, Nelson Delfino; de Carvalho Lopes Rocha, Renan Freire; Pereira, Flavio Soares Metallurgical and Materials Transactions A, Vol. 51, Issue 7 https://doi.org/10.1007/s11661-020-05775-4	journal	April 2020
Substrate melting during thermal spray splat quenching Li, L.; Wang, X. Y.; Wei, G. Thin Solid Films, Vol. 468, Issue 1-2 https://doi.org/10.1016/j.tsf.2004.05.073	journal	December 2004
Gas Atomization of Amorphous Aluminum: Part I. Thermal Behavior Calculations Zheng, Baolong; Lin, Yaojun; Zhou, Yizhang Metallurgical and Materials Transactions B, Vol. 40, Issue 5 https://doi.org/10.1007/s11663-009-9276-5	journal	August 2009
Consolidation and properties of ball-milled Ti50Cu18Ni22Al4Sn6 glassy alloy by equal channel angular extrusion Zhang, L. C.; Xu, J.; Ma, E. Materials Science and Engineering: A, Vol. 434, Issue 1-2 https://doi.org/10.1016/j.msea.2006.06.085	journal	October 2006
Fabrication of new metallic glassy Ti 40.6 Cu 15.4 Ni 8.5 Al 5.5 W 30 alloy powders by mechanical alloying and subsequent SPS consolidation Sherif El-Eskandarany, M.; Al-Hajji, L. A.; Al-Hazza, Abdulsalam Advanced Powder Technology, Vol. 28, Issue 3 https://doi.org/10.1016/j.apt.2016.12.007	journal	March 2017
Compaction of amorphous aluminum alloy powder by direct extrusion and equal channel angular extrusion Senkov, O. N.; Senkova, S. V.; Scott, J. M. Materials Science and Engineering: A, Vol. 393, Issue 1-2 https://doi.org/10.1016/j.msea.2004.09.061	journal	February 2005
Thermal stability and magnetic properties of FeCoBSiNb bulk metallic glasses Stoica, Mihai; Li, Ran; Yavari, Alain Reza Journal of Alloys and Compounds, Vol. 504 https://doi.org/10.1016/j.jallcom.2010.04.013	journal	August 2010
Preparation of Fe-based monodisperse spherical particles with fully glassy phase Miura, Ayako; Dong, Wei; Fukue, Masahiro Journal of Alloys and Compounds, Vol. 509, Issue 18 https://doi.org/10.1016/j.jallcom.2011.02.044	journal	May 2011
Consolidation of gas atomized Cu47Ti34Zr11Ni8 amorphous powders Sordelet, Daniel J.; Rozhkova, Elena; Besser, Matthew F. Journal of Non-Crystalline Solids, Vol. 317, Issue 1-2 https://doi.org/10.1016/S0022-3093(02)01994-4	journal	March 2003
Splat-quench solidification of freely falling liquid-metal drops by impact on a planar substrate Collings, E. W.; Markworth, A. J.; McCoy, J. K. Journal of Materials Science, Vol. 25, Issue 8 https://doi.org/10.1007/BF00575404	journal	August 1990
Solidification Study of Aluminum Alloys using Impulse Atomization: Part I: Heat Transfer Analysis of an Atomized Droplet Wiskel, J. B.; Henein, H.; Maire, E. Canadian Metallurgical Quarterly, Vol. 41, Issue 1 https://doi.org/10.1179/cmq.2002.41.1.97	journal	January 2002
Phase formation and mechanical properties of Ti–Cu–Ni–Zr bulk metallic glass composites Gargarella, P.; Pauly, S.; Samadi Khoshkhoo, M. Acta Materialia, Vol. 65 https://doi.org/10.1016/j.actamat.2013.10.068	journal	February 2014

Similar Records

Production of Nd-Fe-B alloy powders using high-pressure gas atomization and their hard magnetic properties

Journal Article · 1988 · Metallurgical Transactions, (Section) A: Physical Metallurgy and Materials Science; (USA) · OSTI ID:5180542

Study on Magnetic Properties and Degradability of Gas Atomization Fe-Based (Fe-Si-B-P) Amorphous Powder

Journal Article · 2019 · Journal of Superconductivity and Novel Magnetism · OSTI ID:22919469

Phase composition and magnetic characteristics of inert gas-atomized RE-Fe-B-based powders

Journal Article · 1995 · IEEE Transactions on Magnetics · OSTI ID:186933

Production of gas-atomized powders of [(Fe[subscript 0.6]Co[subscript 0.4])[subscript 0.75]B[subscri

Citation Formats

References (66)

Similar Records

Related Subjects