Strengthening of pretreated aluminum during ultrasonic additive manufacturing

Pagan, Michael; Zhao, Ningxiner; Headings, Leon M.; Dapino, Marcelo J.; Vijayan, Sriram; Jinschek, Joerg R.; Zinkle, Steven J.; Babu, S.S.

doi:10.1016/j.addma.2022.103228

Strengthening of pretreated aluminum during ultrasonic additive manufacturing

Journal Article · 01 December 2022 · Additive Manu.

DOI:https://doi.org/10.1016/j.addma.2022.103228· OSTI ID:1901126

Pagan, Michael; Zhao, Ningxiner; Headings, Leon M.; Dapino, Marcelo J.; Vijayan, Sriram; Jinschek, Joerg R.; Zinkle, Steven J.; Babu, S.S.

Research Organization:: Advanced Photon Source (APS), Argonne National Laboratory (ANL), Argonne, IL (US)

Sponsoring Organization:: DOE - Office Of Science; DOE - BASIC ENERGY SCIENCES

OSTI ID:: 1901126

Journal Information:: Additive Manu., Journal Name: Additive Manu. Journal Issue: (A) Vol. 60

Country of Publication:: United States

Language:: ENGLISH

References (77)

HAZ development and accelerated post-weld natural ageing in ultrasonic spot welding aluminium 6111-T4 automotive sheet Chen, Y. -C.; Bakavos, D.; Gholinia, A. Acta Materialia, Vol. 60, Issue 6-7 https://doi.org/10.1016/j.actamat.2012.01.047	journal	April 2012
Comparative in Mechanical Behavior of 6061 Aluminum Alloy Welded by Pulsed GMAW with Different Filler Metals and Heat Treatments Guzmán, Isidro; Granda, Everardo; Acevedo, Jorge Materials, Vol. 12, Issue 24 https://doi.org/10.3390/ma12244157	journal	December 2019
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments Oliver, W. C.; Pharr, G. M. Journal of Materials Research, Vol. 7, Issue 06, p. 1564-1583 https://doi.org/10.1557/JMR.1992.1564	journal	June 1992
Characterisation of aluminium alloy 6061 for the ultrasonic consolidation process Kong, C. Y.; Soar, R. C.; Dickens, P. M. Materials Science and Engineering: A, Vol. 363, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00590-2	journal	December 2003
Formulating the strength factor α for improved predictability of radiation hardening Tan, L.; Busby, J. T. Journal of Nuclear Materials, Vol. 465 https://doi.org/10.1016/j.jnucmat.2015.07.009	journal	October 2015
Indentation size effects in crystalline materials: A law for strain gradient plasticity Nix, William D.; Gao, Huajian Journal of the Mechanics and Physics of Solids, Vol. 46, Issue 3 https://doi.org/10.1016/S0022-5096(97)00086-0	journal	March 1998
Microstructure and lap shear strength of the weld interface in ultrasonic welding of Al alloy to stainless steel Fujii, Hiromichi T.; Goto, Yuta; Sato, Yutaka S. Scripta Materialia, Vol. 116 https://doi.org/10.1016/j.scriptamat.2016.02.004	journal	April 2016
Formation of submicroscopic vacancy clusters and radiation-induced refining in metals by electron-irradiation at high temperatures Kiritani, M.; Urban, K.; Yoshida, N. Radiation Effects, Vol. 61, Issue 1-2 https://doi.org/10.1080/00337578208225740	journal	January 1982
Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing Dehoff, R. R.; Babu, S. S. Acta Materialia, Vol. 58, Issue 13 https://doi.org/10.1016/j.actamat.2010.03.006	journal	August 2010
Nano-indentation of copper thin films on silicon substrates Suresh, S.; Nieh, T. -G.; Choi, B. W. Scripta Materialia, Vol. 41, Issue 9 https://doi.org/10.1016/S1359-6462(99)00245-6	journal	October 1999
Void growth and constitutive softening in a periodically voided solid Worswick, M. Journal of the Mechanics and Physics of Solids, Vol. 38, Issue 5 https://doi.org/10.1016/0022-5096(90)90025-Y	journal	January 1990
Coarsening behavior of Mg2Si precipitates during post homogenization cooling process in Al-Mg-Si alloy Qin, Jian; Nagaumi, Hiromi; Yu, Chengbin Journal of Alloys and Compounds, Vol. 902 https://doi.org/10.1016/j.jallcom.2021.162851	journal	May 2022
Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments McElhaney, K. W.; Vlassak, J. J.; Nix, W. D. Journal of Materials Research, Vol. 13, Issue 5 https://doi.org/10.1557/JMR.1998.0185	journal	May 1998
Size dependent hardness of silver single crystals Ma, Qing; Clarke, David R. Journal of Materials Research, Vol. 10, Issue 4 https://doi.org/10.1557/JMR.1995.0853	journal	April 1995
Generalized Representation of Grain Boundary Self-Diffusion data Gust, W.; Mayer, S.; Bögel, A. Le Journal de Physique Colloques, Vol. 46, Issue C4 https://doi.org/10.1051/jphyscol:1985460	journal	April 1985
Microstructure and mechanical property characterisation of aluminium–steel joints fabricated using ultrasonic additive manufacturing Sridharan, Niyanth; Wolcott, Paul; Dapino, Marcelo Science and Technology of Welding and Joining, Vol. 22, Issue 5 https://doi.org/10.1080/13621718.2016.1249644	journal	November 2016
Stability Analysis of the Mg2Si Phase in AA 6061 Aluminum Alloy Linardi, E.; Haddad, R.; Lanzani, L. Procedia Materials Science, Vol. 1 https://doi.org/10.1016/j.mspro.2012.06.074	journal	January 2012
The Indentation Size Effect: A Critical Examination of Experimental Observations and Mechanistic Interpretations Pharr, George M.; Herbert, Erik G.; Gao, Yanfei Annual Review of Materials Research, Vol. 40, Issue 1 https://doi.org/10.1146/annurev-matsci-070909-104456	journal	June 2010
The role of inclusions in ductile fracture and fracture toughness Broek, D. Engineering Fracture Mechanics, Vol. 5, Issue 1 https://doi.org/10.1016/0013-7944(73)90007-6	journal	February 1973
Micro-hardness of annealed and work-hardened copper polycrystals Poole, W. J.; Ashby, M. F.; Fleck, N. A. Scripta Materialia, Vol. 34, Issue 4 https://doi.org/10.1016/1359-6462(95)00524-2	journal	February 1996
Effect of preheat temperature and post-process treatment on the microstructure and mechanical properties of stainless steel 410 made via ultrasonic additive manufacturing Han, Tianyang; Kuo, Chih-Hsiang; Sridharan, Niyanth Materials Science and Engineering: A, Vol. 769 https://doi.org/10.1016/j.msea.2019.138457	journal	January 2020
Influence of ultrasonic spot welding on microstructure in a magnesium alloy Patel, V. K.; Bhole, S. D.; Chen, D. L. Scripta Materialia, Vol. 65, Issue 10 https://doi.org/10.1016/j.scriptamat.2011.08.009	journal	November 2011
Rationalization of anisotropic mechanical properties of Al-6061 fabricated using ultrasonic additive manufacturing Sridharan, Niyanth; Gussev, Maxim; Seibert, Rachel Acta Materialia, Vol. 117 https://doi.org/10.1016/j.actamat.2016.06.048	journal	September 2016
Effects of He radiation on cavity distribution and hardness of bulk nanolayered Cu-Nb composites Yang, L. X.; Zheng, S. J.; Zhou, Y. T. Journal of Nuclear Materials, Vol. 487 https://doi.org/10.1016/j.jnucmat.2017.02.022	journal	April 2017
Toward accurate evaluation of bulk hardness from nanoindentation testing at low indent depths Zhu, Pengcheng; Zhao, Yajie; Agarwal, Shradha Materials & Design, Vol. 213 https://doi.org/10.1016/j.matdes.2021.110317	journal	January 2022
Microindentations on W and Mo oriented single crystals: An STM study Stelmashenko, N. A.; Walls, M. G.; Brown, L. M. Acta Metallurgica et Materialia, Vol. 41, Issue 10 https://doi.org/10.1016/0956-7151(93)90100-7	journal	October 1993
Forced chemical mixing in immiscible alloys during severe plastic deformation at elevated temperatures Vo, Nhon Q.; Odunuga, Samson; Bellon, Pascal Acta Materialia, Vol. 57, Issue 10 https://doi.org/10.1016/j.actamat.2009.03.007	journal	June 2009
Ultrasonic additive manufacturing of 4130 steel using Ni interlayers Kuo, Chih-Hsiang; Sridharan, Niyanth; Han, Tianyang Science and Technology of Welding and Joining, Vol. 24, Issue 5 https://doi.org/10.1080/13621718.2019.1607486	journal	May 2019
Vacancy clusters in ultra fine grained metals prepared by severe plastic deformation Čížek, J.; Melikhova, O.; Barnovská, Z. Journal of Physics: Conference Series, Vol. 443 https://doi.org/10.1088/1742-6596/443/1/012008	journal	June 2013
A review of dynamic recrystallization phenomena in metallic materials Huang, K.; Logé, R. E. Materials & Design, Vol. 111 https://doi.org/10.1016/j.matdes.2016.09.012	journal	December 2016
Optimum process parameters for ultrasonic consolidation of 3003 aluminium Kong, C. Y.; Soar, R. C.; Dickens, P. M. Journal of Materials Processing Technology, Vol. 146, Issue 2 https://doi.org/10.1016/j.jmatprotec.2003.10.016	journal	February 2004
Characterisation of Al–Ti dissimilar material joints fabricated using ultrasonic additive manufacturing Wolcott, P. J.; Sridharan, N.; Babu, S. S. Science and Technology of Welding and Joining, Vol. 21, Issue 2 https://doi.org/10.1179/1362171815Y.0000000072	journal	February 2016
Atomic-scale mechanisms of void hardening in bcc and fcc metals Osetsky, Yu. N.; Bacon, D. J. Philosophical Magazine, Vol. 90, Issue 7-8 https://doi.org/10.1080/14786430903164580	journal	March 2010
Elastic interaction between prismatic dislocation loops and straight dislocations Kroupa, F.; Hirsch, P. B. Discussions of the Faraday Society, Vol. 38 https://doi.org/10.1039/df9643800049	journal	January 1964
Elastic modulus measurement—obtaining reliable data from the tensile test Lord, J. D.; Morrell, R. M. Metrologia, Vol. 47, Issue 2 https://doi.org/10.1088/0026-1394/47/2/S05	journal	March 2010
A review of nanoindentation continuous stiffness measurement technique and its applications Li, Xiaodong; Bhushan, Bharat Materials Characterization, Vol. 48, Issue 1 https://doi.org/10.1016/S1044-5803(02)00192-4	journal	February 2002
A Coupled Thermal-Mechanical Analysis of Ultrasonic Bonding Mechanism Zhang, Chunbo (SAM); Li, Leijun Metallurgical and Materials Transactions B, Vol. 40, Issue 2 https://doi.org/10.1007/s11663-008-9224-9	journal	February 2009
Smart Structure Integration Through Ultrasonic Additive Manufacturing Dapino, Marcelo J. Volume 2: Mechanics and Behavior of Active Materials; Integrated System Design and Implementation; Bioinspired Smart Materials and Systems; Energy Harvesting https://doi.org/10.1115/SMASIS2014-7710	conference	September 2014
The Deformation and Ageing of Mild Steel: III Discussion of Results Hall, E. O. Proceedings of the Physical Society. Section B, Vol. 64, Issue 9 https://doi.org/10.1088/0370-1301/64/9/303	journal	September 1951
A model of size effects in nano-indentation Huang, Y.; Zhang, F.; Hwang, K. Journal of the Mechanics and Physics of Solids, Vol. 54, Issue 8 https://doi.org/10.1016/j.jmps.2006.02.002	journal	August 2006
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology Oliver, W. C.; Pharr, G. M. Journal of Materials Research, Vol. 19, Issue 1 https://doi.org/10.1557/jmr.2004.19.1.3	journal	January 2004
Ultrasonic additive manufacturing of zirconium: Pilot results Massey, Caleb P.; Havrilak, Cody J.; Gussev, Maxim N. Materials Letters, Vol. 302 https://doi.org/10.1016/j.matlet.2021.130330	journal	November 2021
Nanoindentation in multi-modal map combinations: a correlative approach to local mechanical property assessment Magazzeni, Christopher M.; Gardner, Hazel M.; Howe, Inigo Journal of Materials Research, Vol. 36, Issue 11 https://doi.org/10.1557/s43578-020-00035-y	journal	January 2021
Interdiffusion of Elements During Ultrasonic Additive Manufacturing Pagan, Michael; Petrie, Christian; Leonard, Donovan Metallurgical and Materials Transactions A, Vol. 52, Issue 3 https://doi.org/10.1007/s11661-020-06131-2	journal	February 2021
The Role of Indentation Depth on the Measured Hardness of Materials Shell De Guzman, Melissa; Neubauer, Gabi; Flinn, Paul MRS Proceedings, Vol. 308 https://doi.org/10.1557/PROC-308-613	journal	January 1993
Quantitative Evaluation of Bulk and Interface Microstructures in Al-3003 Alloy Builds Made by Very High Power Ultrasonic Additive Manufacturing Fujii, Hiromichi T.; Sriraman, M. R.; Babu, S. S. Metallurgical and Materials Transactions A, Vol. 42, Issue 13 https://doi.org/10.1007/s11661-011-0805-x	journal	September 2011
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals Cordero, Z. C.; Knight, B. E.; Schuh, C. A. International Materials Reviews, Vol. 61, Issue 8 https://doi.org/10.1080/09506608.2016.1191808	journal	June 2016
Thermal transients during processing of materials by very high power ultrasonic additive manufacturing Sriraman, M. R.; Gonser, Matt; Fujii, Hiromichi T. Journal of Materials Processing Technology, Vol. 211, Issue 10 https://doi.org/10.1016/j.jmatprotec.2011.05.003	journal	October 2011
The determination of dislocation densities in thin films Ham, R. K. Philosophical Magazine, Vol. 6, Issue 69 https://doi.org/10.1080/14786436108239679	journal	September 1961
Embedded metallized optical fibers for high temperature applications Petrie, Christian M.; Sridharan, Niyanth; Subramanian, Mohan Smart Materials and Structures, Vol. 28, Issue 5 https://doi.org/10.1088/1361-665X/ab0b4e	journal	April 2019
Effect of process parameters on bond formation during ultrasonic consolidation of aluminum alloy 3003 Janaki Ram, G. D.; Yang, Y.; Stucker, B. E. Journal of Manufacturing Systems, Vol. 25, Issue 3 https://doi.org/10.1016/S0278-6125(07)80011-2	journal	January 2006
Bonding characteristics during very high power ultrasonic additive manufacturing of copper Sriraman, M. R.; Babu, S. S.; Short, M. Scripta Materialia, Vol. 62, Issue 8 https://doi.org/10.1016/j.scriptamat.2009.12.040	journal	April 2010
Further analysis of the size effect in indentation hardness tests of some metals Atkinson, M. Journal of Materials Research, Vol. 10, Issue 11 https://doi.org/10.1557/JMR.1995.2908	journal	November 1995
Grain structure, texture and mechanical property evolution of automotive aluminium sheet during high power ultrasonic welding Haddadi, Farid; Tsivoulas, Dimitrios Materials Characterization, Vol. 118 https://doi.org/10.1016/j.matchar.2016.06.004	journal	August 2016
Thermodynamic description of the Al–Mg–Si system using a new formulation for the temperature dependence of the excess Gibbs energy Tang, Ying; Du, Yong; Zhang, Lijun Thermochimica Acta, Vol. 527 https://doi.org/10.1016/j.tca.2011.10.017	journal	January 2012
The hardness of solids Tabor, D. Reviews of Physics in Technology, Vol. 1, Issue 3 https://doi.org/10.1088/0034-6683/1/3/I01	journal	January 1970
Plastic flow and work hardening of Al alloy matrices during ultrasonic consolidation fibre embedding process Li, Dezhi; Soar, Rupert C. Materials Science and Engineering: A, Vol. 498, Issue 1-2 https://doi.org/10.1016/j.msea.2008.08.037	journal	December 2008
Grain Boundary Diffusion in Metals: Recent Developments Herzig, Christian; Divinski, Sergiy V. MATERIALS TRANSACTIONS, Vol. 44, Issue 1 https://doi.org/10.2320/matertrans.44.14	journal	January 2003
Dislocation movement through random arrays of obstacles Foreman, A. J. E.; Makin, M. J. Philosophical Magazine, Vol. 14, Issue 131 https://doi.org/10.1080/14786436608244762	journal	October 1966
Effect of microstructure and precipitation phenomena on the mechanical behavior of AA6061-T6 aluminum alloy weld Hakem, Maamar; Lebaili, Soltane; Mathieu, Stephane The International Journal of Advanced Manufacturing Technology, Vol. 102, Issue 9-12 https://doi.org/10.1007/s00170-019-03401-1	journal	February 2019
On the generation of vacancies by moving dislocations Seitz, Frederick Advances in Physics, Vol. 1, Issue 1 https://doi.org/10.1080/00018735200101161	journal	January 1952
Characterization of Steel-Ta Dissimilar Metal Builds Made Using Very High Power Ultrasonic Additive Manufacturing (VHP-UAM) Sridharan, Niyanth; Norfolk, Mark; Babu, Sudarsanam Suresh Metallurgical and Materials Transactions A, Vol. 47, Issue 5 https://doi.org/10.1007/s11661-016-3354-5	journal	February 2016
Ultrasonic Additive Manufacturing – A Hybrid Production Process for Novel Functional Products Friel, R. J.; Harris, R. A. Procedia CIRP, Vol. 6 https://doi.org/10.1016/j.procir.2013.03.004	journal	January 2013
Microstructure and texture evolution in aluminum and commercially pure titanium dissimilar welds fabricated using ultrasonic additive manufacturing Sridharan, Niyanth; Wolcott, Paul; Dapino, Marcelo Scripta Materialia, Vol. 117 https://doi.org/10.1016/j.scriptamat.2016.02.013	journal	May 2016
Radiation-Induced Effects on Microstructure**Prepared for the Oak Ridge National Laboratory under Contract No. DE-AC05-000R22725 Zinkle, S. J. Comprehensive Nuclear Materials https://doi.org/10.1016/B978-0-08-056033-5.00003-3	book	February 2012
High-strain-rate deformation in ultrasonic additive manufacturing Fujii, Hiromichi T.; Shimizu, Saki; Sato, Yutaka S. Scripta Materialia, Vol. 135 https://doi.org/10.1016/j.scriptamat.2016.12.030	journal	July 2017
Isothermal Time-Temperature-Precipitation Diagram for an Aluminum Alloy 6005A by In Situ DSC Experiments Milkereit, Benjamin; Giersberg, Lydia; Kessler, Olaf Materials, Vol. 7, Issue 4 https://doi.org/10.3390/ma7042631	journal	March 2014
Effect of Process Parameters on Interfacial Temperature and Shear Strength of Ultrasonic Additive Manufacturing of Carbon Steel 4130 Han, Tianyang; Headings, Leon M.; Hahnlen, Ryan Journal of Manufacturing Science and Engineering, Vol. 144, Issue 8 https://doi.org/10.1115/1.4053278	journal	February 2022
Optimization of the shear strengths of ultrasonically consolidated Ti/Al 3003 dual-material structures Obielodan, J. O.; Stucker, B. E.; Martinez, E. Journal of Materials Processing Technology, Vol. 211, Issue 6 https://doi.org/10.1016/j.jmatprotec.2010.12.017	journal	June 2011
Optimized welding parameters for Al 6061 ultrasonic additive manufactured structures Wolcott, Paul J.; Hehr, Adam; Dapino, Marcelo J. Journal of Materials Research, Vol. 29, Issue 17 https://doi.org/10.1557/jmr.2014.139	journal	July 2014
Analysis of displacement damage and defect production under cascade damage conditions Zinkle, S. J.; Singh, B. N. Journal of Nuclear Materials, Vol. 199, Issue 3 https://doi.org/10.1016/0022-3115(93)90140-T	journal	February 1993
Recent progress in understanding reactor pressure vessel steel embrittlement Odette, G. R.; Lucas, G. E. Radiation Effects and Defects in Solids, Vol. 144, Issue 1-4 https://doi.org/10.1080/10420159808229676	journal	June 1998
High-temperature strain monitoring of stainless steel using fiber optics embedded in ultrasonically consolidated nickel layers Petrie, Christian M.; Sridharan, Niyanth; Hehr, Adam Smart Materials and Structures, Vol. 28, Issue 8 https://doi.org/10.1088/1361-665X/ab2a27	journal	July 2019
Thermal Transients During Processing of 3003 Al-H18 Multilayer Build by Very High-Power Ultrasonic Additive Manufacturing Sriraman, M. R.; Gonser, Matt; Foster, Daniel Metallurgical and Materials Transactions B, Vol. 43, Issue 1 https://doi.org/10.1007/s11663-011-9590-6	journal	October 2011
Strengthening Effects at Dissimilar Metal Interfaces Created by Ultrasonic Additive Manufacturing Pagan, Michael; Ohmura, Takahito; Wang, Ling Metallurgical and Materials Transactions A, Vol. 53, Issue 10 https://doi.org/10.1007/s11661-022-06776-1	journal	August 2022
Correlation of Fractographic Features with Mechanical Properties in Systematically Varied Microstructures of Cu-Strengthened High-Strength Low-Alloy Steel Das, Arpan; Das, Swapan Kumar; Tarafder, Soumitra Metallurgical and Materials Transactions A, Vol. 40, Issue 13 https://doi.org/10.1007/s11661-009-9999-6	journal	September 2009
SVET Study of Galvanic Corrosion of Al/Mg₂Si Couple in Aqueous Solutions at Different pH Li, L. L.; Zhang, B.; Tian, B. Journal of The Electrochemical Society, Vol. 164, Issue 6 https://doi.org/10.1149/2.0671706jes	journal	January 2017

Similar Records

Interdiffusion of Elements During Ultrasonic Additive Manufacturing

Journal Article · 2021 · Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science · OSTI ID:1772645

Additive manufacturing enabled synergetic strengthening of bimodal reinforcing particles for aluminum matrix composites

Journal Article · 2023 · Additive Manufacturing · OSTI ID:2423274

Strengthening of pretreated aluminum during ultrasonic additive manufacturing

Citation Formats

References (77)

Similar Records

Related Subjects