Recrystallization Texture Analysis of FeCoNiCrMnAl[subscript 0.5] High-Entropy Alloy Investigated by

Shi, Yajuan; Wang, Youkang; Li, Shilei; Li, Runguang; Cui, Yimin; Wang, Yan-Dong

doi:10.3390/met12101674

Title: Recrystallization Texture Analysis of FeCoNiCrMnAl[subscript 0.5] High-Entropy Alloy Investigated by

Journal Article · 01 October 2022 · Metals

DOI:https://doi.org/10.3390/met12101674· OSTI ID:1901073

Shi, Yajuan; Wang, Youkang; Li, Shilei; Li, Runguang; Cui, Yimin; Wang, Yan-Dong

Cite

Export

Save

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)

Sponsoring Organization:: DOE - Office Of Science; DOE - BASIC ENERGY SCIENCES

OSTI ID:: 1901073

Journal Information:: Metals, Vol. 12, Issue (10)

Country of Publication:: United States

Language:: ENGLISH

References (30)

Tailoring the texture of an extruded Mg sheet through constrained groove pressing for achieving low mechanical anisotropy and high yield strength Hoseini-Athar, M. M.; Mahmudi, R.; Prasath Babu, R. Scripta Materialia, Vol. 186 https://doi.org/10.1016/j.scriptamat.2020.05.042	journal	September 2020
Effect of deformation path on microstructure, microhardness and texture evolution of interstitial free steel fabricated by differential speed rolling Hamad, Kotiba; Chung, Bong Kwon; Ko, Young Gun Materials Characterization, Vol. 94 https://doi.org/10.1016/j.matchar.2014.05.019	journal	August 2014
Effect of Hot Rolling Rate on the Structure and Texture Condition of Plates of the Al – Si – Mg Alloy System Lobanov, M. L.; Loginov, Yu. N.; Danilov, S. V. Metal Science and Heat Treatment, Vol. 60, Issue 5-6 https://doi.org/10.1007/s11041-018-0279-1	journal	September 2018
Texture formation in face-centered cubic high-entropy alloys Sathiaraj, G. Dan; Pukenas, Aurimas; Skrotzki, Werner Journal of Alloys and Compounds, Vol. 826 https://doi.org/10.1016/j.jallcom.2020.154183	journal	June 2020
New insights into the development of microstructure and deformation texture in nickel–60 wt.% cobalt alloy Madhavan, R.; Ray, R. K.; Suwas, S. Acta Materialia, Vol. 78 https://doi.org/10.1016/j.actamat.2014.06.031	journal	October 2014
Effects of alloying addition on deformation mechanisms, microstructure, texture and mechanical properties in Fe-12Mn-0.5C austenitic steel Kalsar, Rajib; Ray, Ranjit Kumar; Suwas, Satyam Materials Science and Engineering: A, Vol. 729 https://doi.org/10.1016/j.msea.2018.05.071	journal	June 2018
Texture formation in metal alloys with cubic crystal structures Kestens, L. A. I.; Pirgazi, H. Materials Science and Technology, Vol. 32, Issue 13 https://doi.org/10.1080/02670836.2016.1231746	journal	January 2016
Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy Sathiaraj, G. Dan; Bhattacharjee, P. P.; Tsai, Che-Wei Intermetallics, Vol. 69 https://doi.org/10.1016/j.intermet.2015.10.005	journal	February 2016
Effect of Microstructure and Texture Evolution During Variable Gauge Rolling on Mechanical Properties of Tailor Rolled Blanks Shafiei, E.; Dehghani, K.; Ostovan, F. Metals and Materials International, Vol. 25, Issue 5 https://doi.org/10.1007/s12540-019-00269-4	journal	April 2019
Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy Bhattacharjee, P. P.; Sathiaraj, G. D.; Zaid, M. Journal of Alloys and Compounds, Vol. 587 https://doi.org/10.1016/j.jallcom.2013.10.237	journal	February 2014
Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals R. Kalidindi, Surya International Journal of Plasticity, Vol. 17, Issue 6 https://doi.org/10.1016/S0749-6419(00)00071-1	journal	July 2001
Microstructure, Texture, and Strength Development during High-Pressure Torsion of CrMnFeCoNi High-Entropy Alloy Skrotzki, Werner; Pukenas, Aurimas; Odor, Eva Crystals, Vol. 10, Issue 4 https://doi.org/10.3390/cryst10040336	journal	April 2020
Crystallographic relations between face- and body-centred cubic crystals formed under near-equilibrium conditions: Observations from the Gibeon meteorite He, Youliang; Godet, Stéphane; Jacques, Pascal J. Acta Materialia, Vol. 54, Issue 5 https://doi.org/10.1016/j.actamat.2005.11.008	journal	March 2006
In situ neutron diffraction study of a new type of stress-induced confined martensitic transformation in Fe22Co20Ni19Cr20Mn12Al7 high-entropy alloy Shi, Yajuan; Li, Shilei; Lee, Tung Lik Materials Science and Engineering: A, Vol. 771 https://doi.org/10.1016/j.msea.2019.138555	journal	January 2020
Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system He, J. Y.; Liu, W. H.; Wang, H. Acta Materialia, Vol. 62 https://doi.org/10.1016/j.actamat.2013.09.037	journal	January 2014
The intermediate energy X-ray beamline at the APS McChesney, J. L.; Reininger, R.; Ramanathan, M. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 746 https://doi.org/10.1016/j.nima.2014.01.068	journal	May 2014
Effect of shear deformation on plasticity, recrystallization mechanism and texture evolution of Mg–3Al–1Zn alloy sheet: Experiment and coupled finite element-VPSC simulation Chen, S. F.; Song, H. W.; Zhang, S. H. Journal of Alloys and Compounds, Vol. 805 https://doi.org/10.1016/j.jallcom.2019.07.015	journal	October 2019
Texture evolution in NiAl Harris, K. E.; Ebrahimi, F.; Garmestani, H. Materials Science and Engineering: A, Vol. 247, Issue 1-2 https://doi.org/10.1016/S0921-5093(97)00740-5	journal	June 1998
Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys Sathiaraj, G. D.; Ahmed, M. Z.; Bhattacharjee, P. P. Journal of Alloys and Compounds, Vol. 664 https://doi.org/10.1016/j.jallcom.2015.12.172	journal	April 2016
Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys Haase, Christian; Barrales-Mora, Luis A. Acta Materialia, Vol. 150 https://doi.org/10.1016/j.actamat.2018.02.048	journal	May 2018
Effect of strain path on microstructure and texture formation in cold-rolled and annealed FCC equiatomic CoCrFeMnNi high entropy alloy Reddy, S. R.; Ahmed, M. Z.; Sathiaraj, G. D. Intermetallics, Vol. 87 https://doi.org/10.1016/j.intermet.2017.04.016	journal	August 2017
The effect of Al to high-temperature deformation mechanisms and processing maps of Al0.5CoCrFeMnNi high entropy alloy Kim, W. J.; Jeong, H. T.; Park, H. K. Journal of Alloys and Compounds, Vol. 802 https://doi.org/10.1016/j.jallcom.2019.06.099	journal	September 2019
Fundamental Aspect of Texture Formation in Low Carbon Steel. Inagaki, Hirosuke ISIJ International, Vol. 34, Issue 4 https://doi.org/10.2355/isijinternational.34.313	journal	January 1994
Texture and microstructure of hot rolled steel Raabe, D.; Lücke, K. Scripta Metallurgica et Materialia, Vol. 26, Issue 8 https://doi.org/10.1016/0956-716X(92)90567-X	journal	April 1992
Development of ferrite rolling textures in low- and extra low-carbon steels Tóth, L. S.; Jonas, J. J.; Daniel, D. Metallurgical Transactions A, Vol. 21, Issue 11 https://doi.org/10.1007/BF02647219	journal	November 1990
The Development of Rolling Textures in Low-Carbon Steels Inagaki, H.; Suda, T. Texture, Vol. 1, Issue 2 https://doi.org/10.1155/TSM.1.129	journal	January 1972
Deformation texture transition in brass: critical role of micro-scale shear bands El-Danaf, E.; Kalidindi, S. R.; Doherty, R. D. Acta Materialia, Vol. 48, Issue 10 https://doi.org/10.1016/S1359-6454(00)00050-1	journal	June 2000
On the Relation of Microstructure and Texture Evolution in an Austenitic Fe-28Mn-0.28C TWIP Steel During Cold Rolling Haase, Christian; Chowdhury, Sandip Ghosh; Barrales-Mora, Luis A. Metallurgical and Materials Transactions A, Vol. 44, Issue 2 https://doi.org/10.1007/s11661-012-1543-4	journal	November 2012
Control of microstructure and orientation distribution in Ni–Al-based (β/γ′) two phase alloys by thermomechanical processing Sakata, T.; Yasuda, H. Y.; Umakoshi, Y. Acta Materialia, Vol. 49, Issue 20 https://doi.org/10.1016/S1359-6454(01)00310-X	journal	December 2001
Microstructure and mechanical properties of Ni1,5Co1,5CrFeTi0,5 high entropy alloy fabricated by mechanical alloying and spark plasma sintering Moravcik, Igor; Cizek, Jan; Zapletal, Jozef Materials & Design, Vol. 119 https://doi.org/10.1016/j.matdes.2017.01.036	journal	April 2017

Similar Records

Solid state amorphization of metastable Al_0.5TiZrPdCuNi high entropy alloy investigated by high voltage electron microscopy

Journal Article · 2017 · Materials Chemistry and Physics · OSTI ID:1901073

Nagase, Takeshi; Takeuchi, Akira; Amiya, Kenji; +1 more

External-field-induced crystal structure and domain texture in (1;#8722;x)Na[subscript 0.5]Bi[subscript 0.5]TiO[subscript 3x]K[subscript 0.5]Bi[subscript 0.5]TiO[subscript 3] piezoceramics

Journal Article · 2020 · Acta Mater. · OSTI ID:1901073

Otonicar, M.; Park, J.; Logar, M.; +3 more

Piezoelectric K[subscript 0.5]Na[subscript 0.5]NbO[subscript 3] Ceramics Textured Using Needlelike K[subscript 0.5]Na[subscript 0.5]NbO[subscript 3] Templates

Journal Article · 2014 · J. Am. Ceram. Soc. · OSTI ID:1901073

Haugen, Astri Bjornetun; Olsen, Gerhard Henning; Madaro, Francesco; +5 more

Title: Recrystallization Texture Analysis of FeCoNiCrMnAl[subscript 0.5] High-Entropy Alloy Investigated by

Citation Formats

References (30)

Similar Records

Related Subjects