Influence of warm rolling temperature on multi-scale lamellar structure and mechanical properties of

Liu, Guolong; Zhang, Minghe; Feng, Yunli; Cao, Kuo; Li, Shilei; Wang, Yandong

doi:10.1016/j.jmrt.2022.04.047

Influence of warm rolling temperature on multi-scale lamellar structure and mechanical properties of

Journal Article · 01 May 2022 · J. Mater. Res. Technol.

DOI:https://doi.org/10.1016/j.jmrt.2022.04.047· OSTI ID:1879744

Liu, Guolong; Zhang, Minghe; Feng, Yunli; Cao, Kuo; Li, Shilei; Wang, Yandong

Research Organization:: Advanced Photon Source (APS), Argonne National Laboratory (ANL), Argonne, IL (US)

Sponsoring Organization:: DOE - Office Of Science; FOREIGN

OSTI ID:: 1879744

Journal Information:: J. Mater. Res. Technol., Journal Name: J. Mater. Res. Technol. Vol. 18

Country of Publication:: United States

Language:: ENGLISH

References (48)

A review on the steels, alloys/high entropy alloys, composites and coatings used in high temperature wear applications Gopinath, Vattikuti Mohan; Arulvel, S. Materials Today: Proceedings, Vol. 43 https://doi.org/10.1016/j.matpr.2020.06.495	journal	January 2021
Calculation of the taylor factor and lattice rotations for bcc metals deforming by pencil glide Rosenberg, J. M.; Piehler, H. R. Metallurgical Transactions, Vol. 2, Issue 1 https://doi.org/10.1007/BF02662666	journal	December 1971
Flattening of a Nearly Plane Solid Surface due to Capillarity Mullins, William W. Journal of Applied Physics, Vol. 30, Issue 1 https://doi.org/10.1063/1.1734979	journal	January 1959
Microstructure evolution and mechanical properties of eutectoid steel with ultrafine or fine (ferrite+cementite) structure Zheng, Chengsi; Li, Longfei; Yang, Wangyue Materials Science and Engineering: A, Vol. 599 https://doi.org/10.1016/j.msea.2014.01.037	journal	April 2014
Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction Zhang, Minghe; Li, Longfei; Ding, Jie Acta Materialia, Vol. 141 https://doi.org/10.1016/j.actamat.2017.09.030	journal	December 2017
Relationship between microstructure and yield strength for plain carbon steel with ultrafine or fine (ferrite+cementite) structure Zheng, Chengsi; Li, Longfei; Yang, Wangyue Materials Science and Engineering: A, Vol. 617 https://doi.org/10.1016/j.msea.2014.08.050	journal	November 2014
Tensile properties and work hardening behaviors of ultrafine grained carbon steel and pure iron processed by warm high pressure torsion Ning, Jiang-li; Courtois-Manara, Eglantine; Kurmanaeva, Lilia Materials Science and Engineering: A, Vol. 581 https://doi.org/10.1016/j.msea.2013.05.008	journal	October 2013
Hall–Petch Behavior in Ultra-Fine-Grained AISI 301LN Stainless Steel Rajasekhara, S.; Ferreira, P. J.; Karjalainen, L. P. Metallurgical and Materials Transactions A, Vol. 38, Issue 6 https://doi.org/10.1007/s11661-007-9143-4	journal	June 2007
Ductility and strain hardening in gradient and lamellar structured materials Wu, Xiaolei; Zhu, Yuntian; Lu, Ke Scripta Materialia, Vol. 186 https://doi.org/10.1016/j.scriptamat.2020.05.025	journal	September 2020
Effect of Rolling in the Recrystallization Temperature Region Associated with a Post-Heat Treatment on the Microstructure, Crystal Orientation, and Mechanical Properties of API 5L X70 Pipeline Steel Masoumi, Mohammad; Silva, Cleiton Carvalho; Abreu, Hamilton Ferreira Gomes de Materials Research, Vol. 20, Issue 1 https://doi.org/10.1590/1980-5373-mr-2016-0651	journal	December 2016
Microstructure and mechanical properties of medium-carbon steel subjected to severe plastic deformation Karavaeva, M. V.; Nurieva, S. K.; Zaripov, N. G. Metal Science and Heat Treatment, Vol. 54, Issue 3-4 https://doi.org/10.1007/s11041-012-9473-8	journal	July 2012
Deformation-induced martensitic transformation kinetics and correlative micromechanical behavior of medium-Mn transformation-induced plasticity steel Zhang, Minghe; Chen, Haiyang; Wang, Youkang Journal of Materials Science & Technology, Vol. 35, Issue 8 https://doi.org/10.1016/j.jmst.2019.04.007	journal	August 2019
Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect Yan, Zhifeng; Wang, Denghui; He, Xiuli Materials Science and Engineering: A, Vol. 723 https://doi.org/10.1016/j.msea.2018.03.023	journal	April 2018
Effect of hydrogen in advanced high strength steel materials Dwivedi, Sandeep Kumar; Vishwakarma, Manish International Journal of Hydrogen Energy, Vol. 44, Issue 51 https://doi.org/10.1016/j.ijhydene.2019.08.149	journal	October 2019
Boundary strengthening in undeformed and deformed polycrystals Hansen, Niels Materials Science and Engineering: A, Vol. 409, Issue 1-2 https://doi.org/10.1016/j.msea.2005.04.061	journal	November 2005
Micromechanical behavior of eutectoid steel quantified by an analytical model calibrated by in situ synchrotron-based X-ray diffraction Zheng, Chengsi; Li, Longfei; Wang, Yandong Materials Science and Engineering: A, Vol. 631 https://doi.org/10.1016/j.msea.2015.02.003	journal	April 2015
Work-hardening of ferrite and microstructure-based modelling of its mechanical behaviour under tension Gutiérrez, I.; Altuna, M. A. Acta Materialia, Vol. 56, Issue 17 https://doi.org/10.1016/j.actamat.2008.05.023	journal	October 2008
Role of grain size on the strength and ductile–brittle transition temperature in the dual-sized ferrite region of the heat-affected zone of ultra-fine grained steel Qiu, Hai; Ito, Reisuke; Hiraoka, Kazuo Materials Science and Engineering: A, Vol. 435-436 https://doi.org/10.1016/j.msea.2006.07.086	journal	November 2006
Effect of Initial Microstructure on Impact Toughness of 1200 MPa-Class High Strength Steel with Ultrafine Elongated Grain Structure Jafari, Meysam; Garrison, Warren M.; Tsuzaki, Kaneaki Metallurgical and Materials Transactions A, Vol. 45, Issue 2 https://doi.org/10.1007/s11661-013-2045-8	journal	October 2013
Grain orientation, deformation microstructure and flow stress Hansen, N.; Huang, X.; Winther, G. Materials Science and Engineering: A, Vol. 494, Issue 1-2 https://doi.org/10.1016/j.msea.2007.10.086	journal	October 2008
Steels in additive manufacturing: A review of their microstructure and properties Bajaj, P.; Hariharan, A.; Kini, A. Materials Science and Engineering: A, Vol. 772 https://doi.org/10.1016/j.msea.2019.138633	journal	January 2020
Dependence of tensile properties on microstructural features of bimodal-sized ferrite/cementite steels Ning, Jiang-li; Feng, Yun-li; Wang, Ming-ming Journal of Iron and Steel Research International, Vol. 24, Issue 1 https://doi.org/10.1016/S1006-706X(17)30010-9	journal	January 2017
Improvement of the work hardening rate of ultrafine grained steels through second phase particles Song, R.; Ponge, D.; Raabe, D. Scripta Materialia, Vol. 52, Issue 11 https://doi.org/10.1016/j.scriptamat.2005.02.016	journal	June 2005
Strengthening and ductilization of laminate dual-phase steels with high martensite content Gao, Bo; Hu, Rong; Pan, Zhiyi Journal of Materials Science & Technology, Vol. 65 https://doi.org/10.1016/j.jmst.2020.03.083	journal	February 2021
Fcc nanostructured TiFeCoNi alloy with multi-scale grains and enhanced plasticity Fu, Zhiqiang; MacDonald, Benjamin E.; Zhang, Dalong Scripta Materialia, Vol. 143 https://doi.org/10.1016/j.scriptamat.2017.09.023	journal	January 2018
Smaller is less stable: Size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels Wang, M-M.; Tasan, C. C.; Ponge, D. Acta Materialia, Vol. 79 https://doi.org/10.1016/j.actamat.2014.07.020	journal	October 2014
Formation of ultrafine grained ferrite by warm deformation of lath martensite in low-alloy steels with different carbon content Poorganji, B.; Miyamoto, G.; Maki, T. Scripta Materialia, Vol. 59, Issue 3 https://doi.org/10.1016/j.scriptamat.2008.03.041	journal	August 2008
The effect of interlamellar spacing on strength of pearlite in annealed eutectoid and hypoeutectoid plain carbon steels Ray, K. K.; Mondal, D. Acta Metallurgica et Materialia, Vol. 39, Issue 10 https://doi.org/10.1016/0956-7151(91)90002-I	journal	October 1991
Nanoscale precipitates and comprehensive strengthening mechanism in AISI H13 steel Mao, Wen-wen; Ning, An-gang; Guo, Han-jie International Journal of Minerals, Metallurgy, and Materials, Vol. 23, Issue 9 https://doi.org/10.1007/s12613-016-1323-z	journal	September 2016
Super-high-strength and formable medium Mn steel manufactured by warm rolling process Hu, Bin; He, BinBin; Cheng, GuanJu Acta Materialia, Vol. 174 https://doi.org/10.1016/j.actamat.2019.05.043	journal	August 2019
Strengthening mechanisms of reduced activation ferritic/martensitic steels: A review Zhou, Jin-hua; Shen, Yong-feng; Jia, Nan International Journal of Minerals, Metallurgy and Materials, Vol. 28, Issue 3 https://doi.org/10.1007/s12613-020-2121-1	journal	March 2021
Fabricating ultrafine grain by advanced thermomechanical processing on low-carbon microalloyed steel Li, Ba; Liu, Qingyou; Jia, Shujun Scripta Materialia, Vol. 152 https://doi.org/10.1016/j.scriptamat.2018.04.028	journal	July 2018
The Dependence of Fracture Resistance on the Size and Distribution of Blocky Retained Austenite-Martensite Constituents Yang, Dezhen; Xiong, Zhiping Metallurgical and Materials Transactions A, Vol. 51, Issue 5 https://doi.org/10.1007/s11661-020-05698-0	journal	March 2020
Texture and mechanical properties of EUROFER 97 steel processed by ECAP Eddahbi, M.; Monge, M. A.; Leguey, T. Materials Science and Engineering: A, Vol. 528, Issue 18 https://doi.org/10.1016/j.msea.2011.04.006	journal	July 2011
An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion Gazder, Azdiar A.; Cao, Wenquan; Davies, Christopher H. J. Materials Science and Engineering: A, Vol. 497, Issue 1-2 https://doi.org/10.1016/j.msea.2008.07.030	journal	December 2008
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD Calcagnotto, Marion; Ponge, Dirk; Demir, Eralp Materials Science and Engineering: A, Vol. 527, Issue 10-11 https://doi.org/10.1016/j.msea.2010.01.004	journal	April 2010
Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues Kubin, L. P.; Mortensen, A. Scripta Materialia, Vol. 48, Issue 2 https://doi.org/10.1016/S1359-6462(02)00335-4	journal	January 2003
Formation of Bimodal-Sized Structure and Its Tensile Properties in a Warm-Rolled and Annealed Ultrafine-Grained Ferrite/Cementite Steel Zhao, Ming-Chun; Hanamura, Toshihiro; Yin, Fuxing Metallurgical and Materials Transactions A, Vol. 39, Issue 7 https://doi.org/10.1007/s11661-008-9531-4	journal	April 2008
Hall–Petch relation and boundary strengthening Hansen, Niels Scripta Materialia, Vol. 51, Issue 8 https://doi.org/10.1016/j.scriptamat.2004.06.002	journal	October 2004
Results and consequences of a recalculation of the frank-read and the orowan stress Ashby, M. F. Acta Metallurgica, Vol. 14, Issue 5 https://doi.org/10.1016/0001-6160(66)90074-5	journal	May 1966
Carbon partitioning during quenching and partitioning heat treatment accompanied by carbide precipitation Toji, Yuki; Miyamoto, Goro; Raabe, Dierk Acta Materialia, Vol. 86 https://doi.org/10.1016/j.actamat.2014.11.049	journal	March 2015
Graded Materials for Resistance to Contact Deformation and Damage Suresh, S. Science, Vol. 292, Issue 5526 https://doi.org/10.1126/science.1059716	journal	June 2001
Mechanism-based strain gradient plasticity? I. Theory Gao, H. Journal of the Mechanics and Physics of Solids, Vol. 47, Issue 6 https://doi.org/10.1016/S0022-5096(98)00103-3	journal	April 1999
Advanced high strength steel (AHSS) development through chemical patterning of austenite Sun, W. W.; Wu, Y. X.; Yang, S. C. Scripta Materialia, Vol. 146 https://doi.org/10.1016/j.scriptamat.2017.11.007	journal	March 2018
Fiber texture and substructural features in the caliber-rolled low-carbon steels Yin, Fuxing; Hanamura, Toshihiro; Inoue, Tadanobu Metallurgical and Materials Transactions A, Vol. 35, Issue 2 https://doi.org/10.1007/s11661-004-0378-z	journal	February 2004
Grain growth and Hall–Petch relation in dual-sized ferrite/cementite steel with nano-sized cementite particles in a heterogeneous and dense distribution Zhao, Ming-Chun; Hanamura, Toshihiro; Qiu, Hai Scripta Materialia, Vol. 54, Issue 6 https://doi.org/10.1016/j.scriptamat.2005.11.032	journal	March 2006
Effect of bimodal distribution in ferrite grain sizes on the tensile properties of low-carbon steels Patra, S.; Hasan, Sk. Md.; Narasaiah, N. Materials Science and Engineering: A, Vol. 538 https://doi.org/10.1016/j.msea.2011.12.114	journal	March 2012
Orientation dependent hardening of {111} plate precipitate by parametric dislocation dynamics Liu, Jianbin; Muraishi, Shinji Mechanics of Materials, Vol. 160 https://doi.org/10.1016/j.mechmat.2021.103968	journal	September 2021

Similar Records

Influence of warm rolling temperature on multi-scale lamellar structure and mechanical properties of

Journal Article · 2022 · J. Mater. Res. Technol. · OSTI ID:1878381

Influence of microstructure on the mechanical properties of heat-treated cast lamellar structure

Journal Article · 1996 · Scripta Materialia · OSTI ID:247978

Research Concerning The Mechanical And Structural Properties Of Warm Rolled Construction Carbon Steels

Journal Article · 2007 · AIP Conference Proceedings · OSTI ID:21056977

Influence of warm rolling temperature on multi-scale lamellar structure and mechanical properties of

Citation Formats

References (48)

Similar Records

Related Subjects