Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Acid-in-Clay Electrolyte for Wide-Temperature-Range and Long-Cycle Proton Batteries

Journal Article · · Adv. Mater.

Research Organization:
Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)
Sponsoring Organization:
DOE - Office Of Science; FOREIGN; UNIVERSITY
OSTI ID:
1873551
Journal Information:
Adv. Mater., Vol. 34, Issue (23)
Country of Publication:
United States
Language:
ENGLISH

References (45)

New Concepts in Electrolytes February 2020
A dynamic stability design strategy for lithium metal solid state batteries May 2021
Li metal deposition and stripping in a solid-state battery via Coble creep February 2020
Designing the next generation of proton-exchange membrane fuel cells July 2021
Before Li Ion Batteries November 2018
Diffusion-free Grotthuss topochemistry for high-rate and long-life proton batteries January 2019
Opportunities and challenges for aqueous metal-proton batteries April 2021
A High‐Rate Aqueous Proton Battery Delivering Power Below −78 °C via an Unfrozen Phosphoric Acid June 2020
The Renaissance of Proton Batteries February 2021
Anticatalytic Strategies to Suppress Water Electrolysis in Aqueous Batteries April 2021
Decoupling electrolytes towards stable and high-energy rechargeable aqueous zinc–manganese dioxide batteries March 2020
A 1.8 V Aqueous Supercapacitor with a Bipolar Assembly of Ion-Exchange Membranes as the Separator January 2016
An All-Organic Proton Battery March 2017
A Non‐aqueous H 3 PO 4 Electrolyte Enables Stable Cycling of Proton Electrodes September 2020
Uncharted Waters: Super-Concentrated Electrolytes January 2020
Proton diffusion facilitated by indirect interactions between proton donors through several hydrogen bonds September 2019
The proton conduction mechanism in a material consisting of packed acids January 2014
Formation and Occurrence of Clay Minerals January 1952
Technical and commercial progress in the adoption of geopolymer cement March 2012
Geopolymer technology: the current state of the art December 2006
Geopolymer foams: An overview of recent advancements April 2020
Applied clay mineralogy today and tomorrow March 1999
Properties and applications of palygorskite-sepiolite clays December 1996
The mechanism of proton conduction in phosphoric acid April 2012
Why do proton conducting polybenzimidazole phosphoric acid membranes perform well in high-temperature PEM fuel cells? January 2017
Anhydrous proton conduction at 150 °C in a crystalline metal–organic framework October 2009
Micromechanical Properties of Elastic Polymeric Materials As Probed by Scanning Force Microscopy May 1998
A new measure of hydrogen bonding strength – ab initio and atoms in molecules studies April 2001
Ab Initio Molecular-Dynamics Simulation of Concentrated Phosphoric Acid May 2006
Insertion-Type Electrodes for Nonaqueous Li-Ion Capacitors July 2014
Degradation mechanisms in Li-ion batteries: a state-of-the-art review: Degradation Mechanisms in Li-ion Batteries: A State-of-the-Art Review April 2017
Drug–clay nanohybrids as sustained delivery systems September 2016
An organic/inorganic electrode-based hydronium-ion battery February 2020
Copper-coordinated cellulose ion conductors for solid-state batteries October 2021
Developing fibrillated cellulose as a sustainable technological material February 2021
Material design and engineering of next-generation flow-battery technologies November 2016
Intercalation-conversion hybrid cathodes enabling Li–S full-cell architectures with jointly superior gravimetric and volumetric energy densities March 2019
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries June 2020
Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries March 2021
Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte March 2021
CMOS-Compatible Protonic Programmable Resistor Based on Phosphosilicate Glass Electrolyte for Analog Deep Learning July 2021
Recent progress towards the electrosynthesis of ammonia from sustainable resources May 2017
Recent advances in industrial CO2 electroreduction April 2019
Recent Advances and Challenges of Electrocatalytic N 2 Reduction to Ammonia May 2020
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology January 2004

Related Subjects