Selective laser melted high Ni content TiNi alloy with superior superelasticity and hardwearing

Shen, Hui; Zhang, Qingquan; Yang, Ying; Ren, Yang; Guo, Yanbao; Yang, Yafeng; Li, Zhonghan; Xiong, Zhiwei; Kong, Xiangguang; Zhang, Zhihui; Guo, Fangmin; Cui, Lishan; Hao, Shijie

doi:10.1016/j.jmst.2021.09.067

Title: Selective laser melted high Ni content TiNi alloy with superior superelasticity and hardwearing

Journal Article · 01 July 2022 · J. Mater. Sci. Technol.

DOI:https://doi.org/10.1016/j.jmst.2021.09.067· OSTI ID:1870913

Shen, Hui; Zhang, Qingquan; Yang, Ying; Ren, Yang; Guo, Yanbao; Yang, Yafeng; Li, Zhonghan; Xiong, Zhiwei; Kong, Xiangguang; Zhang, Zhihui; Guo, Fangmin; Cui, Lishan; Hao, Shijie

Cite

Export

Save

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)

Sponsoring Organization:: DOE - Office Of Science; FOREIGN

OSTI ID:: 1870913

Journal Information:: J. Mater. Sci. Technol., Vol. 116

Country of Publication:: United States

Language:: ENGLISH

References (57)

60NiTi: A Review of Recent Research Findings, Potential for Structural and Mechanical Applications, and Areas of Continued Investigations Khanlari, Khashayar; Ramezani, Maziar; Kelly, Piaras Transactions of the Indian Institute of Metals, Vol. 71, Issue 4 https://doi.org/10.1007/s12666-017-1224-5	journal	November 2017
Deformation characteristics of the intermetallic alloy 60NiTi Benafan, O.; Garg, A.; Noebe, R. D. Intermetallics, Vol. 82 https://doi.org/10.1016/j.intermet.2016.11.003	journal	March 2017
Superelasticity in a New BioImplant Material: Ni-rich 55NiTi Alloy Adharapurapu, R. R.; Vecchio, K. S. Experimental Mechanics, Vol. 47, Issue 3 https://doi.org/10.1007/s11340-006-9004-x	journal	January 2007
Selective laser sintering/melting of nitinol–hydroxyapatite composite for medical applications Shishkovskii, I. V.; Yadroitsev, I. A.; Smurov, I. Yu. Powder Metallurgy and Metal Ceramics, Vol. 50, Issue 5-6 https://doi.org/10.1007/s11106-011-9329-6	journal	September 2011
Microstructural and Mechanical Properties of Porous 60NiTi Prepared by Conventional Press-and-sinter Method Khanlari, Khashayar; Ramezani, Maziar; Hayat, Muhammad MATEC Web of Conferences, Vol. 109 https://doi.org/10.1051/matecconf/201710901002	journal	January 2017
Fundamentals and applications of 3D printing for novel materials Lee, Jian-Yuan; An, Jia; Chua, Chee Kai Applied Materials Today, Vol. 7 https://doi.org/10.1016/j.apmt.2017.02.004	journal	June 2017
Fabrication of NiTi through additive manufacturing: A review Elahinia, Mohammad; Shayesteh Moghaddam, Narges; Taheri Andani, Mohsen Progress in Materials Science, Vol. 83 https://doi.org/10.1016/j.pmatsci.2016.08.001	journal	October 2016
Ultrafine microstructure development in laser polishing of selective laser melted Ti alloy Li, Yuhang; Cheng, Xu; Guan, Yingchun Journal of Materials Science & Technology, Vol. 83 https://doi.org/10.1016/j.jmst.2020.12.056	journal	August 2021
Progress in additive manufacturing on new materials: A review Li, Neng; Huang, Shuai; Zhang, Guodong Journal of Materials Science & Technology, Vol. 35, Issue 2 https://doi.org/10.1016/j.jmst.2018.09.002	journal	February 2019
Toward understanding the effect of remelting on the additively manufactured NiTi Bayati, Parisa; Safaei, Keyvan; Nematollahi, Mohammadreza The International Journal of Advanced Manufacturing Technology, Vol. 112, Issue 1-2 https://doi.org/10.1007/s00170-020-06378-4	journal	November 2020
Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution Yadroitsev, I.; Krakhmalev, P.; Yadroitsava, I. Journal of Alloys and Compounds, Vol. 583 https://doi.org/10.1016/j.jallcom.2013.08.183	journal	January 2014
Phase transformation characteristics and mechanical characterization of nitinol synthesized by laser direct deposition Halani, Pratik R.; Kaya, Irfan; Shin, Yung C. Materials Science and Engineering: A, Vol. 559 https://doi.org/10.1016/j.msea.2012.09.031	journal	January 2013
Physical metallurgy of Ti–Ni-based shape memory alloys Otsuka, K.; Ren, X. Progress in Materials Science, Vol. 50, Issue 5 https://doi.org/10.1016/j.pmatsci.2004.10.001	journal	July 2005
Selective Laser Melting of NiTi Shape Memory Alloy: Processability, Microstructure, and Superelasticity Biffi, Carlo Alberto; Fiocchi, Jacopo; Valenza, Fabrizio Shape Memory and Superelasticity, Vol. 6, Issue 3 https://doi.org/10.1007/s40830-020-00298-8	journal	August 2020
Selective laser melting of NiTi alloy with superior tensile property and shape memory effect Xiong, Zhiwei; Li, Zhonghan; Sun, Zhen Journal of Materials Science & Technology, Vol. 35, Issue 10 https://doi.org/10.1016/j.jmst.2019.05.015	journal	October 2019
Interfacial/intragranular reinforcement of titanium-matrix composites produced by a novel process involving core-shell structured powder Li, Shaofu; Yang, Yafeng; Misra, R. D. K. Carbon, Vol. 164 https://doi.org/10.1016/j.carbon.2020.04.010	journal	August 2020
Sintering Response and Equiaxed α-Ti Grain Formation in the Ti Alloys Sintered from Ti@Ni Core–Shell Powders Tan, C.; Li, S. F.; Yang, Y. F. Metallurgical and Materials Transactions A, Vol. 49, Issue 8 https://doi.org/10.1007/s11661-018-4698-9	journal	May 2018
My Experience with Ti–Ni-Based and Ti-Based Shape Memory Alloys Miyazaki, Shuichi Shape Memory and Superelasticity, Vol. 3, Issue 4 https://doi.org/10.1007/s40830-017-0122-3	journal	October 2017
Influence of Ni on martensitic phase transformations in NiTi shape memory alloys Frenzel, J.; George, E. P.; Dlouhy, A. Acta Materialia, Vol. 58, Issue 9 https://doi.org/10.1016/j.actamat.2010.02.019	journal	May 2010
Analytical TEM investigations on concentration gradients surrounding Ni4Ti3 precipitates in Ni–Ti shape memory material Yang, Zhiqing; Tirry, Wim; Schryvers, Dominique Scripta Materialia, Vol. 52, Issue 11 https://doi.org/10.1016/j.scriptamat.2005.02.013	journal	June 2005
Phase field modeling of Ni-concentration distribution behavior around Ni4Ti3 precipitates in NiTi alloys Ke, C. B.; Cao, S.; Zhang, X. P. Computational Materials Science, Vol. 105 https://doi.org/10.1016/j.commatsci.2015.04.013	journal	July 2015
Effect of Ni4Ti3 precipitation on martensitic transformation in Ti–Ni Zhou, N.; Shen, C.; Wagner, M. F. -X. Acta Materialia, Vol. 58, Issue 20 https://doi.org/10.1016/j.actamat.2010.08.033	journal	December 2010
Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi Tirry, W.; Schryvers, D. Acta Materialia, Vol. 53, Issue 4 https://doi.org/10.1016/j.actamat.2004.10.049	journal	February 2005
Martensitic phase transformations in nanocrystalline NiTi studied by TEM Waitz, T.; Kazykhanov, V.; Karnthaler, H. P. Acta Materialia, Vol. 52, Issue 1 https://doi.org/10.1016/j.actamat.2003.08.036	journal	January 2004
Size effects on martensitic phase transformations in nanocrystalline NiTi shape memory alloys Waitz, T.; Antretter, T.; Fischer, F. D. Materials Science and Technology, Vol. 24, Issue 8 https://doi.org/10.1179/174328408X302620	journal	August 2008
Size-dependent martensitic transformation path causing atomic-scale twinning of nanocrystalline NiTi shape memory alloys Waitz, T.; Spišák, D.; Hafner, J. Europhysics Letters (EPL), Vol. 71, Issue 1 https://doi.org/10.1209/epl/i2005-10061-y	journal	July 2005
Size effects on the martensitic phase transformation of NiTi nanograins Waitz, T.; Antretter, T.; Fischer, F. D. Journal of the Mechanics and Physics of Solids, Vol. 55, Issue 2 https://doi.org/10.1016/j.jmps.2006.06.006	journal	February 2007
Structural Study of R-Phase in Ti-50.23 at.%Ni and Ti-47.75 at.%Ni-1.50 at.%Fe Alloys Hara, Toru; Ohba, Takuya; Okunishi, Eiji Materials Transactions, JIM, Vol. 38, Issue 1 https://doi.org/10.2320/matertrans1989.38.11	journal	January 1997
High resolution transmission electron microscopy study of the hardening mechanism through phase separation in a β-Ti–35Nb–7Zr–5Ta alloy for implant applications Afonso, Conrado R. M.; Ferrandini, Peterson L.; Ramirez, Antonio J. Acta Biomaterialia, Vol. 6, Issue 4 https://doi.org/10.1016/j.actbio.2009.11.010	journal	April 2010
Quantitative measurement of displacement and strain fields from HREM micrographs Hÿtch, M. J.; Snoeck, E.; Kilaas, R. Ultramicroscopy, Vol. 74, Issue 3, p. 131-146 https://doi.org/10.1016/S0304-3991(98)00035-7	journal	August 1998
Quantitative strain and stress measurements in Ge/Si dual channels grown on a Si0.5Ge0.5 virtual substrate Cherkashin, N.; Hÿtch, M. J.; Snoeck, E. Materials Science and Engineering: B, Vol. 124-125 https://doi.org/10.1016/j.mseb.2005.08.054	journal	December 2005
Elastic strain around needle-shaped particles embedded in Al matrix Douin, J.; Donnadieu, P.; Houdellier, F. Acta Materialia, Vol. 58, Issue 17 https://doi.org/10.1016/j.actamat.2010.06.053	journal	October 2010
In situ synchrotron high-energy X-ray diffraction study of microscopic deformation behavior of a hard-soft dual phase composite containing phase transforming matrix Zhang, Junsong; Hao, Shijie; Jiang, Daqiang Acta Materialia, Vol. 130 https://doi.org/10.1016/j.actamat.2017.03.052	journal	May 2017
Dual Phase Synergy Enabled Large Elastic Strains of Nanoinclusions in a Dislocation Slip Matrix Composite Zhang, Junsong; Hao, Shijie; Jiang, Daqiang Nano Letters, Vol. 18, Issue 5 https://doi.org/10.1021/acs.nanolett.8b00427	journal	April 2018
In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing Trapp, Johannes; Rubenchik, Alexander M.; Guss, Gabe Applied Materials Today, Vol. 9 https://doi.org/10.1016/j.apmt.2017.08.006	journal	December 2017
Tailoring Selective Laser Melting Process Parameters for NiTi Implants Bormann, Therese; Schumacher, Ralf; Müller, Bert Journal of Materials Engineering and Performance, Vol. 21, Issue 12 https://doi.org/10.1007/s11665-012-0318-9	journal	July 2012
Effect of SLM Parameters on Transformation Temperatures of Shape Memory Nickel Titanium Parts: Effect of SLM Parameters on Transformation Temperatures of NiTi Dadbakhsh, Sasan; Speirs, Mathew; Kruth, Jean-Pierre Advanced Engineering Materials, Vol. 16, Issue 9 https://doi.org/10.1002/adem.201300558	journal	March 2014
An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties Seede, Raiyan; Shoukr, David; Zhang, Bing Acta Materialia, Vol. 186 https://doi.org/10.1016/j.actamat.2019.12.037	journal	March 2020
Microstructure formed during selective laser melting of IN738LC in keyhole mode Guraya, T.; Singamneni, S.; Chen, Z. W. Journal of Alloys and Compounds, Vol. 792 https://doi.org/10.1016/j.jallcom.2019.03.419	journal	July 2019
Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms Xia, Mujian; Gu, Dongdong; Yu, Guanqun Science Bulletin, Vol. 61, Issue 13 https://doi.org/10.1007/s11434-016-1098-7	journal	July 2016
Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy Tan, Qiyang; Liu, Yingang; Fan, Zhiqi Journal of Materials Science & Technology, Vol. 58 https://doi.org/10.1016/j.jmst.2020.03.070	journal	December 2020
Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance Cai, Chao; Wu, Xu; Liu, Wan Journal of Materials Science & Technology, Vol. 57 https://doi.org/10.1016/j.jmst.2020.05.004	journal	November 2020
Influence of stress aging process on variants of nano-Ni4Ti3 precipitates and martensitic transformation temperatures in NiTi shape memory alloy Radi, A.; Khalil-Allafi, J.; Etminanfar, M. R. Materials & Design, Vol. 142 https://doi.org/10.1016/j.matdes.2018.01.024	journal	March 2018
Precipitation of Ni4Ti3-variants in a polycrystalline Ni-rich NiTi shape memory alloy Bojda, O.; Eggeler, G.; Dlouhý, A. Scripta Materialia, Vol. 53, Issue 1 https://doi.org/10.1016/j.scriptamat.2005.03.006	journal	July 2005
Modeling of Ni4Ti3 precipitation during stress-free and stress-assisted aging of bi-crystalline NiTi shape memory alloys Ke, Chang-bo; Cao, Shan-shan; Ma, Xiao Transactions of Nonferrous Metals Society of China, Vol. 22, Issue 10 https://doi.org/10.1016/S1003-6326(11)61503-3	journal	October 2012
Selective variant growth of coherent Ti11Ni14 precipitate in a TiNi alloy under applied stresses Li, D. Y.; Chen, L. Q. Acta Materialia, Vol. 45, Issue 2 https://doi.org/10.1016/S1359-6454(96)00207-8	journal	February 1997
Selective growth of Ni4Ti3 precipitate variants induced by complicated cyclic stress during laser additive manufacturing of NiTi-based composites Ma, Chenglong; Gu, Dongdong; Dai, Donghua Materials Characterization, Vol. 143 https://doi.org/10.1016/j.matchar.2018.04.004	journal	September 2018
Deformation physics of shape memory alloys – Fundamentals at atomistic frontier Chowdhury, Piyas; Sehitoglu, Huseyin Progress in Materials Science, Vol. 88 https://doi.org/10.1016/j.pmatsci.2017.03.003	journal	July 2017
Compressive response of NiTi single crystals Sehitoglu, H.; Karaman, I.; Anderson, R. Acta Materialia, Vol. 48, Issue 13 https://doi.org/10.1016/S1359-6454(00)00153-1	journal	August 2000
Stabilisation of martensite due to shear deformation via variant reorientation in polycrystalline NiTi Liu, Yinong; Favier, D. Acta Materialia, Vol. 48, Issue 13 https://doi.org/10.1016/S1359-6454(00)00129-4	journal	August 2000
A Transforming Metal Nanocomposite with Large Elastic Strain, Low Modulus, and High Strength Hao, Shijie; Cui, Lishan; Jiang, Daqiang Science, Vol. 339, Issue 6124, p. 1191-1194 https://doi.org/10.1126/science.1228602	journal	March 2013
Microstructure and kinetics of a functionally graded NiTi–TiCx composite produced by combustion synthesis Burkes, Douglas E.; Moore, John J. Journal of Alloys and Compounds, Vol. 430, Issue 1-2 https://doi.org/10.1016/j.jallcom.2006.05.008	journal	March 2007
Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites Hu, Liangfa; Kothalkar, Ankush; Proust, Gwénaëlle Journal of Alloys and Compounds, Vol. 610 https://doi.org/10.1016/j.jallcom.2014.04.224	journal	October 2014
Effect of starting materials on the wear performance of NiTi-based composites Farvizi, M.; Ebadzadeh, T.; Vaezi, M. R. Wear, Vol. 334-335 https://doi.org/10.1016/j.wear.2015.04.011	journal	July 2015
Effect of surface treatment by ceramic conversion on the fretting behavior of NiTi shape memory alloy Yang, Hui; Qian, Linmao; Zhou, Zhongrong Tribology Letters, Vol. 25, Issue 3 https://doi.org/10.1007/s11249-006-9169-6	journal	December 2006
Surface treatment of NiTi for medical applications Hassel, A. W. Minimally Invasive Therapy & Allied Technologies, Vol. 13, Issue 4 https://doi.org/10.1080/13645700410020278	journal	January 2004
Bimodal nanocrystallization of NiTi shape memory alloy by laser shock peening and post-deformation annealing Ye, Chang; Suslov, Sergey; Fei, Xueling Acta Materialia, Vol. 59, Issue 19 https://doi.org/10.1016/j.actamat.2011.07.070	journal	November 2011

Similar Records

Selective laser melted high Ni content TiNi alloy with superior superelasticity and hardwearing

Journal Article · 2022 · J. Mater. Sci. Technol. · OSTI ID:1870913

Shen, Hui; Zhang, Qingquan; Yang, Ying; +10 more

The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability

Journal Article · 2020 · Applied Materials Today · OSTI ID:1870913

Zhang, Qingquan; Hao, Shijie; Liu, Yuting; +7 more

Selective variant growth of coherent Ti{sub 11}Ni{sub 14} precipitate in a TiNi alloy under applied stresses

Journal Article · 1997 · Acta Materialia · OSTI ID:1870913

Li, D Y; Chen, Q

Title: Selective laser melted high Ni content TiNi alloy with superior superelasticity and hardwearing

Citation Formats

References (57)

Similar Records

Related Subjects