Review on study of internal load transfer in metal matrix composites using diffraction techniques

Maurya, Pooja; Kota, Navya; Gibmeier, Jens; Wanner, Alexander; Roy, Siddhartha

doi:10.1016/j.msea.2022.142973

Review on study of internal load transfer in metal matrix composites using diffraction techniques

Journal Article · 01 April 2022 · Mat. Sci. Eng. A

DOI:https://doi.org/10.1016/j.msea.2022.142973· OSTI ID:1855437

Maurya, Pooja; Kota, Navya; Gibmeier, Jens; Wanner, Alexander; Roy, Siddhartha

Research Organization:: Advanced Photon Source (APS), Argonne National Laboratory (ANL), Argonne, IL (US)

Sponsoring Organization:: DOE - Office Of Science

OSTI ID:: 1855437

Journal Information:: Mat. Sci. Eng. A, Journal Name: Mat. Sci. Eng. A Vol. 840

Country of Publication:: United States

Language:: ENGLISH

References (164)

The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites Allen, A. J.; Bourke, M. A. M.; Dawes, S. Acta Metallurgica et Materialia, Vol. 40, Issue 9 https://doi.org/10.1016/0956-7151(92)90155-8	journal	September 1992
Damage evolution and domain-level anisotropy in metal/ceramic composites exhibiting lamellar microstructures Roy, Siddhartha; Butz, Benjamin; Wanner, Alexander Acta Materialia, Vol. 58, Issue 7 https://doi.org/10.1016/j.actamat.2009.12.015	journal	April 2010
Neutron diffraction measurement of the internal stresses following heat treatment of a plastically deformed Al/SiC particulate metal–matrix composite Dutta, M.; Bruno, G.; Edwards, L. Acta Materialia, Vol. 52, Issue 13 https://doi.org/10.1016/j.actamat.2004.05.002	journal	August 2004
A fast numerical method of introducing the strengthening effect of residual stress and strain to tensile behavior of metal matrix composites Zhang, J. F.; Zhang, X. X.; Andrä, H. Journal of Materials Science & Technology, Vol. 87 https://doi.org/10.1016/j.jmst.2021.01.079	journal	October 2021
Corrigendum to: Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect [Mater. Sci. Eng. A 531 (2012) 112–118] Sanaty-Zadeh, A.; Rohatgi, P. K. Materials Science and Engineering: A, Vol. 551 https://doi.org/10.1016/j.msea.2012.04.039	journal	August 2012
Röntgenographische Untersuchung von Spannungszuständen in Werkstoffen Eigenmann, B.; Macherauch, E. Materialwissenschaft und Werkstofftechnik, Vol. 26, Issue 3 https://doi.org/10.1002/mawe.19950260310	journal	March 1995
SiC single fibre full-fragmentation during straining in a Ti–6Al–4V matrix studied by synchrotron X-rays Preuss, M.; Withers, P. J.; Maire, E. Acta Materialia, Vol. 50, Issue 12 https://doi.org/10.1016/S1359-6454(02)00134-9	journal	July 2002
Freeze casting – A review of processing, microstructure and properties via the open data repository, FreezeCasting.net Scotti, Kristen L.; Dunand, David C. Progress in Materials Science, Vol. 94 https://doi.org/10.1016/j.pmatsci.2018.01.001	journal	May 2018
Load partitioning in Al2O3–Al composites with three-dimensional periodic architecture Young, M. L.; Rao, R.; Almer, J. D. Acta Materialia, Vol. 57, Issue 8 https://doi.org/10.1016/j.actamat.2009.01.019	journal	May 2009
Investigation of through thickness residual stress distribution in equal channel angular rolled Al 5083 alloy by layer removal technique and X-ray diffraction Mahmoodi, M.; Sedighi, M.; Tanner, D. A. Materials & Design, Vol. 40 https://doi.org/10.1016/j.matdes.2012.03.029	journal	September 2012
Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression Basak, A. K.; Pramanik, A.; Prakash, C. Materials Science and Engineering: A, Vol. 763 https://doi.org/10.1016/j.msea.2019.138141	journal	August 2019
Titanium metal matrix composites: An overview Hayat, Muhammad D.; Singh, Harshpreet; He, Zhen Composites Part A: Applied Science and Manufacturing, Vol. 121 https://doi.org/10.1016/j.compositesa.2019.04.005	journal	June 2019
Synchrotron X-ray diffraction studies of the phase-specific deformation in additively manufactured Ni–CrC composites He, Lewei; Pagan, Darren C.; Nardi, Aaron Composites Part B: Engineering, Vol. 222 https://doi.org/10.1016/j.compositesb.2021.109086	journal	October 2021
The determination of thermal residual stresses in unidirectional and cross-ply titanium matrix composites using an etch removal method Watt, Gerald CR; Crocombe, Andrew D.; Ogin, Stephen L. Journal of Composite Materials, Vol. 54, Issue 13 https://doi.org/10.1177/0021998319883167	journal	November 2019
Analysis of residual stresses in particulate reinforced aluminium matrix composite after EDM Sidhu, S. S.; Batish, A.; Kumar, S. Materials Science and Technology, Vol. 31, Issue 15 https://doi.org/10.1179/1743284715Y.0000000033	journal	March 2015
A neutron diffraction study of load partitioning in continuous Ti/SiC composites Withers, P. J.; Clarke, A. P. Acta Materialia, Vol. 46, Issue 18 https://doi.org/10.1016/S1359-6454(98)00297-3	journal	November 1998
Micromechanical investigation of the processing and loading of fibre-reinforced metal matrix composites Böhm, H. J.; Rammerstorfer, F. G. Materials Science and Engineering: A, Vol. 135 https://doi.org/10.1016/0921-5093(91)90558-5	journal	March 1991
Mapping two-dimensional state of strain using synchroton X-ray diffraction Korsunsky, Alexander M.; Wells, Karen E.; Withers, Philip J. Scripta Materialia, Vol. 39, Issue 12 https://doi.org/10.1016/S1359-6462(98)00385-6	journal	November 1998
Lattice strain evolution during cyclic loading of stainless steel Lorentzen, T.; Daymond, M. R.; Clausen, B. Acta Materialia, Vol. 50, Issue 6 https://doi.org/10.1016/S1359-6454(02)00029-0	journal	April 2002
Effects of Thermal Residual Stress on Mechanical Properties of SiC Whisker Reinforced Al–Mg and Al–Li Alloys Composites Hong, Sung-Kil; Tezuka, Hiroyasu; Kamio, Akihiko Materials Transactions, JIM, Vol. 37, Issue 5 https://doi.org/10.2320/matertrans1989.37.975	journal	January 1996
Internal load transfer in an interpenetrating metal/ceramic composite material studied using energy dispersive synchrotron X-ray diffraction Roy, Siddhartha; Gibmeier, Jens; Schell, Karl Günter Materials Science and Engineering: A, Vol. 753 https://doi.org/10.1016/j.msea.2019.03.049	journal	April 2019
Effect of Size, Content and Shape of Reinforcements on the Behavior of Metal Matrix Composites (MMCs) Under Tension Paknia, A.; Pramanik, A.; Dixit, A. R. Journal of Materials Engineering and Performance, Vol. 25, Issue 10 https://doi.org/10.1007/s11665-016-2307-x	journal	August 2016
Austenite reversion kinetics and stability during tempering of a Ti-stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry Escobar, J. D.; Faria, G. A.; Wu, L. Acta Materialia, Vol. 138 https://doi.org/10.1016/j.actamat.2017.07.036	journal	October 2017
Numerical study of internal load transfer in metal/ceramic composites based on freeze-cast ceramic preforms and experimental validation Sinchuk, Yuriy; Roy, Siddhartha; Gibmeier, Jens Materials Science and Engineering: A, Vol. 585 https://doi.org/10.1016/j.msea.2013.07.022	journal	November 2013
Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites Preuss, M.; Rauchs, G.; Doel, T. J. A. Acta Materialia, Vol. 51, Issue 4 https://doi.org/10.1016/S1359-6454(02)00508-6	journal	February 2003
In situ Study of Internal Load Transfer in a Novel Metal/Ceramic Composite Exhibiting Lamellar Microstructure Using Energy Dispersive Synchrotron X-ray Diffraction Roy, Siddhartha; Gibmeier, Jens; Wanner, Alexander Advanced Engineering Materials, Vol. 11, Issue 6 https://doi.org/10.1002/adem.200800352	journal	June 2009
Measurement and prediction of strain in individual phases of a 2219Al/TiC/15p-T6 composite during loading Bourke, M. A. M.; Goldstone, J. A.; Shi, N. Scripta Metallurgica et Materialia, Vol. 29, Issue 6 https://doi.org/10.1016/0956-716X(93)90224-G	journal	September 1993
Residual stress and yield strength evolution with annealing treatments in an age-hardenable aluminum alloy matrix composite Fernández, R.; Cabeza, S.; Mishurova, T. Materials Science and Engineering: A, Vol. 731 https://doi.org/10.1016/j.msea.2018.06.031	journal	July 2018
Study on the relaxation mechanism of residual stress in SiCp/6061Al composites based on the surface modification of reinforcement Zhu, Zhiqiang; Wang, Qingping; Maryum, Pakeeza Applied Physics A, Vol. 127, Issue 4 https://doi.org/10.1007/s00339-021-04451-7	journal	March 2021
Effect of grain size on thermal residual stresses and damage in sintered chromium–alumina composites: Measurement and modeling Węglewski, W.; Basista, M.; Manescu, A. Composites Part B: Engineering, Vol. 67 https://doi.org/10.1016/j.compositesb.2014.06.027	journal	December 2014
The determination of a continuum mechanics equivalent elastic strain from the analysis of multiple diffraction peaks Daymond, Mark R. Journal of Applied Physics, Vol. 96, Issue 8 https://doi.org/10.1063/1.1794896	journal	October 2004
Tensile and fatigue behavior of Al-based metal matrix composites reinforced with continuous carbon or alumina fibers: Part I. Quasi-unidirectional composites Jacquesson, M.; Girard, A.; Vidal-Sétif, M. -H. Metallurgical and Materials Transactions A, Vol. 35, Issue 10 https://doi.org/10.1007/s11661-004-0071-2	journal	October 2004
Microstructure evolution and mechanical properties of B4C/6061Al neutron absorber composite sheets fabricated by powder metallurgy Chen, H. S.; Wang, W. X.; Nie, H. H. Journal of Alloys and Compounds, Vol. 730 https://doi.org/10.1016/j.jallcom.2017.09.312	journal	January 2018
Residual stresses and stress partitioning measurements by neutron diffraction in Al/Al–Cu–Fe composites Tang, F.; Gnäupel-Herold, T.; Prask, H. Materials Science and Engineering: A, Vol. 399, Issue 1-2 https://doi.org/10.1016/j.msea.2005.02.027	journal	June 2005
Explaining Deviatoric Residual Stresses in Aluminum Matrix Composites with Complex Microstructure Evsevleev, S.; Sevostianov, I.; Mishurova, T. Metallurgical and Materials Transactions A, Vol. 51, Issue 6 https://doi.org/10.1007/s11661-020-05697-1	journal	March 2020
Effect of oxidation of SiC particles on mechanical properties and wear behavior of SiCp/Al6061 composites Van Trinh, Pham; Lee, Junho; Minh, Phan Ngoc Journal of Alloys and Compounds, Vol. 769 https://doi.org/10.1016/j.jallcom.2018.07.355	journal	November 2018
Residual stresses in novel metal/ceramic composites exhibiting a lamellar microstructure Roy, Siddhartha; Gibmeier, Jens; Wanner, Alexander Powder Diffraction, Vol. 24, Issue S1 https://doi.org/10.1154/1.3139053	journal	June 2009
Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure Roy, S.; Gibmeier, J.; Kostov, V. Acta Materialia, Vol. 59, Issue 4 https://doi.org/10.1016/j.actamat.2010.11.004	journal	February 2011
A study of the residual stress and its influence on tensile behaviors of fiber-reinforced SiC/Al composite Lu, Yun; Hao, Liang; Pan, Fusheng Advanced Composite Materials, Vol. 22, Issue 4 https://doi.org/10.1080/09243046.2013.802119	journal	August 2013
Neutron diffraction methods for the study of residual stress fields Allen, A. J.; Hutchings, M. T.; Windsor, C. G. Advances in Physics, Vol. 34, Issue 4 https://doi.org/10.1080/00018738500101791	journal	January 1985
Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading Hanan, Jay C.; Mahesh, Sivasambu; Üstündag, Ersan Materials Science and Engineering: A, Vol. 399, Issue 1-2 https://doi.org/10.1016/j.msea.2005.02.018	journal	June 2005
Internal stress evolution in a random-planar short fiber aluminum composite Garces, G.; Bruno, G.; Wanner, A. Scripta Materialia, Vol. 55, Issue 2 https://doi.org/10.1016/j.scriptamat.2006.03.056	journal	July 2006
2D and 3D in-situ mechanical testing of an interpenetrating metal ceramic composite consisting of a slurry-based ceramic foam and AlSi10Mg Schukraft, Joél; Lohr, Christoph; Weidenmann, Kay André Composite Structures, Vol. 263 https://doi.org/10.1016/j.compstruct.2021.113742	journal	May 2021
Thermal residual stress in metal matrix composite Arsenault, R. J.; Taya, M. Acta Metallurgica, Vol. 35, Issue 3 https://doi.org/10.1016/0001-6160(87)90188-X	journal	March 1987
Effect of cyclic plasticity on internal stresses in a metal matrix composite Daymond, M. R.; Fitzpatrick, M. E. Metallurgical and Materials Transactions A, Vol. 37, Issue 6 https://doi.org/10.1007/s11661-006-0140-9	journal	June 2006
Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding Amirkhanlou, Sajjad; Rahimian, Mehdi; Ketabchi, Mostafa Metallurgical and Materials Transactions A, Vol. 47, Issue 10 https://doi.org/10.1007/s11661-016-3666-5	journal	July 2016
Radiation from Electrons in a Synchrotron Elder, F. R.; Gurewitsch, A. M.; Langmuir, R. V. Physical Review, Vol. 71, Issue 11 https://doi.org/10.1103/PhysRev.71.829.5	journal	June 1947
Elastoplastic deformation of Al/SiCp metal–matrix composite studied by self-consistent modelling and neutron diffraction Baczmański, A.; Levy-Tubiana, R.; Fitzpatrick, M. E. Acta Materialia, Vol. 52, Issue 6 https://doi.org/10.1016/j.actamat.2003.12.002	journal	April 2004
In situ synchrotron X-ray diffraction and dilatometric study of austenite formation in a multi-component steel: Influence of initial microstructure and heating rate Esin, V. A.; Denand, B.; Le Bihan, Qu. Acta Materialia, Vol. 80 https://doi.org/10.1016/j.actamat.2014.07.042	journal	November 2014
Effects of welding speed on the multiscale residual stresses in friction stir welded metal matrix composites Zhang, X. X.; Wu, L. H.; Andrä, H. Journal of Materials Science & Technology, Vol. 35, Issue 5 https://doi.org/10.1016/j.jmst.2018.11.005	journal	May 2019
Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel Young, M. L.; Almer, J. D.; Daymond, M. R. Acta Materialia, Vol. 55, Issue 6 https://doi.org/10.1016/j.actamat.2006.11.004	journal	April 2007
Strengthening mechanisms in particulate metal matrix composites Miller, W. S.; Humphreys, F. J. Scripta Metallurgica et Materialia, Vol. 25, Issue 1 https://doi.org/10.1016/0956-716X(91)90349-6	journal	January 1991
Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties Oza, Meet Jaydeepkumar; Schell, Karl Günter; Bucharsky, Ethel Claudia Materials Science and Engineering: A, Vol. 805 https://doi.org/10.1016/j.msea.2020.140625	journal	February 2021
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction Neil, C. J.; Wollmershauser, J. A.; Clausen, B. International Journal of Plasticity, Vol. 26, Issue 12 https://doi.org/10.1016/j.ijplas.2010.03.005	journal	December 2010
Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics Bodunrin, Michael Oluwatosin; Alaneme, Kenneth Kanayo; Chown, Lesley Heath Journal of Materials Research and Technology, Vol. 4, Issue 4 https://doi.org/10.1016/j.jmrt.2015.05.003	journal	October 2015
Determination of macroscopic and microscopic residual stresses in friction stir welded metal matrix composites via neutron diffraction Zhang, X. X.; Ni, D. R.; Xiao, B. L. Acta Materialia, Vol. 87 https://doi.org/10.1016/j.actamat.2015.01.006	journal	April 2015
Load Partitioning Study in a 3D Interpenetrating AlSi12/Al₂O₃ Metal/Ceramic Composite Roy, Siddhartha; Gibmeier, Jens; Kostov, Vladimir Materials Science Forum, Vol. 772 https://doi.org/10.4028/www.scientific.net/MSF.772.103	journal	November 2013
Freezing as a Path to Build Complex Composites Deville, S. Science, Vol. 311, Issue 5760 https://doi.org/10.1126/science.1120937	journal	January 2006
Elastoplasticity of micro-inhomogeneous metals at large strains Lipinski, P.; Berveiller, M. International Journal of Plasticity, Vol. 5, Issue 2 https://doi.org/10.1016/0749-6419(89)90027-2	journal	January 1989
Thermal Relaxation of Residual Stresses in Shot Peened Surface Layer of SiCw/Al Composite Huang, Junjie; Wang, Zhou; Bian, Kai Journal of Materials Engineering and Performance, Vol. 21, Issue 6 https://doi.org/10.1007/s11665-011-9982-4	journal	June 2011
Residual Stresses in Fiber-Reinforced Ceramics due to Thermal Expansion Mismatch Kuntz, Meinhard; Meier, Bernhard; Grathwohl, Georg Journal of the American Ceramic Society, Vol. 76, Issue 10 https://doi.org/10.1111/j.1151-2916.1993.tb03988.x	journal	October 1993
Investigation on surface roughness, residual stress and fatigue property of milling in-situ TiB2/7050Al metal matrix composites Xiong, Yifeng; Wang, Wenhu; Shi, Yaoyao Chinese Journal of Aeronautics, Vol. 34, Issue 4 https://doi.org/10.1016/j.cja.2020.08.046	journal	April 2021
A synchrotron X-ray study of a Ti/SiCf composite during in situ straining Maire, E. Acta Materialia, Vol. 49, Issue 1 https://doi.org/10.1016/S1359-6454(00)00218-4	journal	January 2001
Effects of thermal residual stresses and thermal-induced geometrically necessary dislocations on size-dependent strengthening of particle-reinforced MMCs Cao, Dongfeng; Duan, Qingfeng; Li, Shuxin Composite Structures, Vol. 200 https://doi.org/10.1016/j.compstruct.2018.05.129	journal	September 2018
Numerical simulation of the debonding behavior of fiber reinforced metal matrix composites Bahl, Shashi Materials Today: Proceedings, Vol. 28 https://doi.org/10.1016/j.matpr.2020.04.598	journal	January 2020
Metal Matrix Composites for Thermal Management: A Review Sidhu, Sarabjeet Singh; Kumar, Sanjeev; Batish, Ajay Critical Reviews in Solid State and Materials Sciences, Vol. 41, Issue 2 https://doi.org/10.1080/10408436.2015.1076717	journal	October 2015
Residual stress. Part 1 – Measurement techniques Withers, P. J.; Bhadeshia, H. K. D. H. Materials Science and Technology, Vol. 17, Issue 4 https://doi.org/10.1179/026708301101509980	journal	April 2001
Texture and residual stress within rotary swaged Cu/Al clad composites Kunčická, Lenka; Kocich, Radim; Strunz, Pavel Materials Letters, Vol. 230 https://doi.org/10.1016/j.matlet.2018.07.085	journal	November 2018
Microstructures and mechanical properties of AA6061–SiC composites prepared through spark plasma sintering and hot rolling Li, X. P.; Liu, C. Y.; Ma, M. Z. Materials Science and Engineering: A, Vol. 650 https://doi.org/10.1016/j.msea.2015.10.015	journal	January 2016
A Neutron Diffractometer for a Long Pulsed Neutron Source Sokol, Paul; Wang, Cailin Physics Procedia, Vol. 26 https://doi.org/10.1016/j.phpro.2012.03.023	journal	January 2012
Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction Vaidyanathan, R.; Bourke, M. A. M.; Dunand, D. C. Acta Materialia, Vol. 47, Issue 12 https://doi.org/10.1016/S1359-6454(99)00214-1	journal	September 1999
Gradients in composite materials Bever, M. B.; Duwez, P. E. Materials Science and Engineering, Vol. 10 https://doi.org/10.1016/0025-5416(72)90059-6	journal	January 1972
Synchrotron X-ray residual strain scanning of a friction stir weld Webster, P. J.; Oosterkamp, L. Djapic; Browne, P. A. The Journal of Strain Analysis for Engineering Design, Vol. 36, Issue 1 https://doi.org/10.1243/0309324011512612	journal	January 2001
Effect of Microstructure on Residual Stresses in Sintered Diamond-Metal Composites Selvadurai-Laßl, U.; Crostack, H. -A.; Fischer, G. Advanced Engineering Materials, Vol. 11, Issue 6 https://doi.org/10.1002/adem.200800393	journal	June 2009
Numerical and Experimental Characterization of Elastic Properties of a Novel, Highly Homogeneous Interpenetrating Metal Ceramic Composite Horny, Dominik; Schukraft, Joél; Weidenmann, Kay André Advanced Engineering Materials, Vol. 22, Issue 7 https://doi.org/10.1002/adem.201901556	journal	May 2020
Particle size effect in metal matrix composites: A study by the continuum theory of stress gradient plasticity Soleymani Shishvan, Siamak; Asghari, Amir-Hossein Journal of Composite Materials, Vol. 50, Issue 13 https://doi.org/10.1177/0021998315595708	journal	July 2015
Residual stress and its role in failure Withers, P. J. Reports on Progress in Physics, Vol. 70, Issue 12 https://doi.org/10.1088/0034-4885/70/12/R04	journal	November 2007
Measurement of the evolution of internal strain and load partitioning in magnesium hybrid composites under compression load using in-situ synchrotron X-ray diffraction analysis Meixner, M.; Fitzpatrick, M. E.; Reimers, W. Composites Science and Technology, Vol. 71, Issue 2 https://doi.org/10.1016/j.compscitech.2010.11.003	journal	January 2011
Dislocation generation due to differences between the coefficients of thermal expansion Arsenault, R. J.; Shi, N. Materials Science and Engineering, Vol. 81 https://doi.org/10.1016/0025-5416(86)90261-2	journal	August 1986
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength Zhang, Z.; Chen, D. Scripta Materialia, Vol. 54, Issue 7 https://doi.org/10.1016/j.scriptamat.2005.12.017	journal	April 2006
Preparation of hybrid particulates SiCnp and Mg2Si reinforced Al-Cu matrix composites Li, Jianyu; Zhao, Gaozhan; Wu, Shusen Materials Science and Engineering: A, Vol. 751 https://doi.org/10.1016/j.msea.2019.02.076	journal	March 2019
Effects of WC size and amount on the thermal residual stress in WC–Ni composites Seol, K.; Krawitz, A. D.; Richardson, J. W. Materials Science and Engineering: A, Vol. 398, Issue 1-2 https://doi.org/10.1016/j.msea.2005.01.041	journal	May 2005
Thermal relaxation of residual stress in shot-peened CNT/Al–Mg–Si alloy composites Zhu, Kaiyuan; Li, Zhiqiang; Fan, Genlian Journal of Materials Research and Technology, Vol. 8, Issue 2 https://doi.org/10.1016/j.jmrt.2019.01.023	journal	April 2019
Computational quantification and correction of the errors induced by layer removal for subsurface residual stress measurements Savaria, Vincent; Bridier, Florent; Bocher, Philippe International Journal of Mechanical Sciences, Vol. 64, Issue 1 https://doi.org/10.1016/j.ijmecsci.2012.07.003	journal	November 2012
A study on microstructural effect and mechanical behaviour of Al6061–5%SiC–TiB ₂ particulates reinforced hybrid metal matrix composites Hillary, J. Justin Maria; Ramamoorthi, R.; Joseph, J. Dixon Jim Journal of Composite Materials, Vol. 54, Issue 17 https://doi.org/10.1177/0021998319894666	journal	December 2019
Effect of Cover Plate on the Ballistic Performance of Ceramic Armor Sun, Miao; Cao, Wuxiong; Hu, Diqi Materials, Vol. 14, Issue 1 https://doi.org/10.3390/ma14010001	journal	December 2020
A simple development of the shear lag theory appropriate for composites with a relatively small modulus mismatch Clyne, T. W. Materials Science and Engineering: A, Vol. 122, Issue 2 https://doi.org/10.1016/0921-5093(89)90629-1	journal	December 1989
Residual stress generation in metal matrix composites after cooling Wong, Choo Siew; Pramanik, A.; Basak, A. K. Materials Science and Technology, Vol. 34, Issue 11 https://doi.org/10.1080/02670836.2018.1458460	journal	March 2018
Evaluation of Residual Stress Distribution and Relaxation on In Situ TiB2/7050 Al Composites Lin, Kunyang; Wang, Wenhu; Jiang, Ruisong Materials, Vol. 11, Issue 5 https://doi.org/10.3390/ma11050706	journal	April 2018
Residual stresses in deformed random-planar aluminium/Saffil® short-fibre composites Garces, Gerardo; Bruno, Giovanni; Wanner, Alexander Materials Science and Engineering: A, Vol. 417, Issue 1-2 https://doi.org/10.1016/j.msea.2005.10.069	journal	February 2006
Experimental investigation on residual stress distribution in zirconium/titanium/steel tri-metal explosively welded composite plate after cutting and welding of a cover plate Li, Ning; Zhang, Min; Ye, Jian-lin Journal of Manufacturing Processes, Vol. 64 https://doi.org/10.1016/j.jmapro.2021.01.034	journal	April 2021
Residual stresses and high cycle fatigue properties of friction stir welded SiCp/AA2009 composites Ni, D. R.; Chen, D. L.; Xiao, B. L. International Journal of Fatigue, Vol. 55 https://doi.org/10.1016/j.ijfatigue.2013.05.010	journal	October 2013
Metal Matrix Composites Mortensen, Andreas; Llorca, Javier Annual Review of Materials Research, Vol. 40, Issue 1 https://doi.org/10.1146/annurev-matsci-070909-104511	journal	June 2010
Effect of reinforcement size and orientation on the thermal expansion behavior of metallic glass reinforced metal matrix composites produced by gas pressure infiltration Lichtenberg, Klaudia; Weidenmann, Kay André Thermochimica Acta, Vol. 654 https://doi.org/10.1016/j.tca.2017.05.010	journal	August 2017
Additive Manufacturing of Aluminum‐Based Metal Matrix Composites—A Review Tang, Shengyang; Ummethala, Raghunandan; Suryanarayana, Challapalli Advanced Engineering Materials, Vol. 23, Issue 7 https://doi.org/10.1002/adem.202100053	journal	May 2021
Interphase and intergranular stress generation in carbon steels Oliver, E. C.; Daymond, M. R.; Withers, P. J. Acta Materialia, Vol. 52, Issue 7 https://doi.org/10.1016/j.actamat.2003.12.035	journal	April 2004
Freeze-Casting of Porous Ceramics: A Review of Current Achievements and Issues Deville, S. Advanced Engineering Materials, Vol. 10, Issue 3, p. 155-169 https://doi.org/10.1002/adem.200700270	journal	March 2008
Load partitioning in honeycomb-like silicon carbide aluminum alloy composites Wilkes, T. E.; Harder, B. J.; Almer, J. D. Acta Materialia, Vol. 57, Issue 20 https://doi.org/10.1016/j.actamat.2009.08.050	journal	December 2009
Lattice strain evolution and load partitioning during creep of a Ni-based superalloy single crystal with rafted γ′ microstructure Coakley, James; Ma, Dong; Frost, Matthew Acta Materialia, Vol. 135 https://doi.org/10.1016/j.actamat.2017.06.021	journal	August 2017
Synchrotron X-ray study of bulk lattice strains in externally loaded Cu-Mo composites Wanner, Alexander; Dunand, David C. Metallurgical and Materials Transactions A, Vol. 31, Issue 11 https://doi.org/10.1007/BF02830344	journal	November 2000
Methodological aspects of the high-energy synchrotron X-ray diffraction technique for internal stress evaluation Wanner, Alexander; Dunand, David Journal of Neutron Research, Vol. 9, Issue 2 https://doi.org/10.1080/10238160108200182	journal	December 2001
Effects of particle/matrix interface and strengthening mechanisms on the mechanical properties of metal matrix composites Wu, Guoqing; Zhang, Qingqing; Yang, Xue Composite Interfaces, Vol. 21, Issue 5 https://doi.org/10.1080/15685543.2014.872914	journal	November 2013
Effect of Short Fiber Reinforcement on the Fracture Toughness of Metal Matrix Composites Lee, I. T.; Wang, Y. Q.; Ochi, Y. Advanced Composite Materials, Vol. 19, Issue 1 https://doi.org/10.1163/156855109X434801	journal	January 2010
In-situ analysis of the microstrains during tensile deformation of an AlSi-MMC at room temperature and elevated temperature Pyzalla, A.; Jacques, A.; Feiereisen, J. -P. Journal of Neutron Research, Vol. 9, Issue 2 https://doi.org/10.1080/10238160108200175	journal	December 2001
Finite element analysis of the thermal residual stresses of SiC particle reinforced aluminum composite Bouafia, Farida; Serier, Boualem; Bouiadjra, Bel Abbes Bachir Computational Materials Science, Vol. 54 https://doi.org/10.1016/j.commatsci.2011.10.030	journal	March 2012
Recent advances in residual stress measurement Withers, P. J.; Turski, M.; Edwards, L. International Journal of Pressure Vessels and Piping, Vol. 85, Issue 3 https://doi.org/10.1016/j.ijpvp.2007.10.007	journal	March 2008
Investigation on the residual stress and microstructure of (TiB+TiC)/Ti–6Al–4V composite after shot peening Xie, Lechun; Jiang, Chuanhai; Lu, Weijie Materials Science and Engineering: A, Vol. 528, Issue 9 https://doi.org/10.1016/j.msea.2011.01.022	journal	April 2011
Investigation for Different Peening Techniques on Residual Stress Field of SiCw/Al Composite Huang, Junjie; Wang, Zhou; Bian, Kai Journal of Materials Engineering and Performance, Vol. 22, Issue 3 https://doi.org/10.1007/s11665-012-0303-3	journal	August 2012
Strengthening Mechanisms of Metal Matrix Composites Taya, Minoru Materials Transactions, JIM, Vol. 32, Issue 1 https://doi.org/10.2320/matertrans1989.32.1	journal	January 1991
Load partitioning in aluminum syntactic foams containing ceramic microspheres Balch, D.; Dunand, D. Acta Materialia, Vol. 54, Issue 6 https://doi.org/10.1016/j.actamat.2005.11.017	journal	April 2006
Multiscale modeling of macroscopic and microscopic residual stresses in metal matrix composites using 3D realistic digital microstructure models Zhang, X. X.; Xiao, B. L.; Andrä, Heiko Composite Structures, Vol. 137 https://doi.org/10.1016/j.compstruct.2015.10.045	journal	March 2016
Load transfer in short fibre reinforced metal matrix composites Garces, Gerardo; Bruno, Giovanni; Wanner, Alexander Acta Materialia, Vol. 55, Issue 16 https://doi.org/10.1016/j.actamat.2007.06.003	journal	September 2007
Phase-stress partition during uniaxial tensile loading of a TiC-particulate-reinforced Al composite Shi, N.; Bourke, M. A. M.; Roberts, J. A. Metallurgical and Materials Transactions A, Vol. 28, Issue 12 https://doi.org/10.1007/s11661-997-0031-8	journal	December 1997
Effect of particle size on thermal residual stress in WC–Co composites Coats, D. L.; Krawitz, A. D. Materials Science and Engineering: A, Vol. 359, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00379-4	journal	October 2003
Microscale damage evolution and stress redistribution in Ti–SiC fiber composites Hanan, Jay C.; Üstündag, Ersan; Beyerlein, Irene J. Acta Materialia, Vol. 51, Issue 14 https://doi.org/10.1016/S1359-6454(03)00240-4	journal	August 2003
An Advanced Shear-Lag Model Applicable to Discontinuous Fiber Composites Fukuda, Hiroshi; Chou, Tsu-Wei Journal of Composite Materials, Vol. 15, Issue 1 https://doi.org/10.1177/002199838101500107	journal	January 1981
Fibre anisotropic thermal expansion and residual thermal stress in a graphite/aluminium composite Vedula, M.; Pangborn, R. N.; Queeney, R. A. Composites, Vol. 19, Issue 1 https://doi.org/10.1016/0010-4361(88)90544-7	journal	January 1988
An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals Zecevic, Milovan; Knezevic, Marko; Beyerlein, Irene J. Materials Science and Engineering: A, Vol. 638 https://doi.org/10.1016/j.msea.2015.04.066	journal	June 2015
Complete determination of elastic moduli of interpenetrating metal/ceramic composites using ultrasonic techniques and micromechanical modelling Roy, Siddhartha; Gebert, Jörg-Martin; Stasiuk, Galyna Materials Science and Engineering: A, Vol. 528, Issue 28 https://doi.org/10.1016/j.msea.2011.07.029	journal	October 2011
Internal load transfer and damage evolution in a 3D interpenetrating metal/ceramic composite Roy, Siddhartha; Gibmeier, Jens; Kostov, Vladimir Materials Science and Engineering: A, Vol. 551 https://doi.org/10.1016/j.msea.2012.05.016	journal	August 2012
Effect of ceramic preform geometry on load partitioning in Al2O3–Al composites with three-dimensional periodic architecture Young, M. L.; Rao, R.; Almer, J. D. Materials Science and Engineering: A, Vol. 526, Issue 1-2 https://doi.org/10.1016/j.msea.2009.07.033	journal	November 2009
The materials science synchrotron beamline EDDI for energy-dispersive diffraction analysis Genzel, Ch.; Denks, I. A.; Gibmeier, J. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 578, Issue 1 https://doi.org/10.1016/j.nima.2007.05.209	journal	July 2007
Residual stress. Part 2 – Nature and origins Withers, P. J.; Bhadeshia, H. K. D. H. Materials Science and Technology, Vol. 17, Issue 4 https://doi.org/10.1179/026708301101510087	journal	April 2001
Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties Kota, Navya; Charan, Munagala Sai; Laha, Tapas Ceramics International, Vol. 48, Issue 2 https://doi.org/10.1016/j.ceramint.2021.09.232	journal	January 2022
Thermal Relaxation of Residual Stresses in Shot Peened Surface Layer on TiB₂/Al Composite at Elevated Temperatures Luan, Weizhi; Jiang, Chuanhai; Ji, Vincent MATERIALS TRANSACTIONS, Vol. 50, Issue 6 https://doi.org/10.2320/matertrans.M2009005	journal	January 2009
Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress Withers, P. J.; Preuss, M.; Steuwer, A. Journal of Applied Crystallography, Vol. 40, Issue 5 https://doi.org/10.1107/S0021889807030269	journal	September 2007
Damage evolution in freeze cast metal/ceramic composites exhibiting lamellar microstructures Simpson, C.; Withers, P. J.; Lowe, T. Frattura ed Integrità Strutturale, Vol. 9, Issue 33 https://doi.org/10.3221/IGF-ESIS.33.17	journal	January 2015
Effects of thermal residual stresses and fiber packing on deformation of metal-matrix composites Nakamura, T.; Suresh, S. Acta Metallurgica et Materialia, Vol. 41, Issue 6 https://doi.org/10.1016/0956-7151(93)90186-V	journal	June 1993
Strain Partitioning and Load Transfer in Constituent Phases in Dual-Phase Steels Varshney, A.; Sangal, S.; Mondal, K. Journal of Materials Engineering and Performance, Vol. 25, Issue 9 https://doi.org/10.1007/s11665-016-2196-z	journal	June 2016
Tribological Characteristics of LM13/Si3N4/Gr Hybrid Composite at Elevated Temperature Raj, Nithin; Radhika, N. Silicon, Vol. 11, Issue 2 https://doi.org/10.1007/s12633-018-9893-1	journal	May 2018
Analysis of Deformation Behaviour and Residual Stress in Rotary Swaged Cu/Al Clad Composite Wires Kunčická, Lenka; Macháčková, Adéla; Krátká, Ludmila Materials, Vol. 12, Issue 21 https://doi.org/10.3390/ma12213462	journal	October 2019
Residual stress and microstructure of the CNT/6061 composite after shot peening Zhu, Kaiyuan; Jiang, Chuanhai; Li, Zhiqiang Materials & Design, Vol. 107 https://doi.org/10.1016/j.matdes.2016.06.030	journal	October 2016
Metal/ceramic composites from freeze-cast ceramic preforms: Domain structure and elastic properties Roy, S.; Wanner, A. Composites Science and Technology, Vol. 68, Issue 5 https://doi.org/10.1016/j.compscitech.2007.06.013	journal	April 2008
Analysis of the elastic properties of an interpenetrating AlSi12–Al2O3 composite using ultrasound phase spectroscopy Roy, Siddhartha; Stoll, Oliver; Weidenmann, Kay André Composites Science and Technology, Vol. 71, Issue 7 https://doi.org/10.1016/j.compscitech.2011.02.014	journal	May 2011
In situ room temperature tensile deformation of a 1% CrMoV bainitic steel using synchrotron and neutron diffraction Weisser, M. A.; Evans, A. D.; Van Petegem, S. Acta Materialia, Vol. 59, Issue 11 https://doi.org/10.1016/j.actamat.2011.03.068	journal	June 2011
Microstructural, Dynamic and Residual Stress Analysis of Metal Matrix Composite Shafts Sharma, Anuj; Rastogi, Vikas; Agrawal, Atul Kumar Transactions of the Indian Institute of Metals, Vol. 73, Issue 12 https://doi.org/10.1007/s12666-020-02101-9	journal	October 2020
Load sharing in tungsten fiber reinforced Kanthal composites Clausen, B.; Bourke, Mark A. M.; Brown, Donald W. Materials Science and Engineering: A, Vol. 421, Issue 1-2 https://doi.org/10.1016/j.msea.2005.10.004	journal	April 2006
Measurement of interfacial residual stress in SiC fiber reinforced Ni-Cr-Al alloy composites by Raman spectroscopy Niu, Xixi; Zhang, Haoqiang; Pei, Zhiliang Journal of Materials Science & Technology, Vol. 35, Issue 1 https://doi.org/10.1016/j.jmst.2018.09.023	journal	January 2019
The elasticity and strength of paper and other fibrous materials Cox, H. L. British Journal of Applied Physics, Vol. 3, Issue 3, p. 72-79 https://doi.org/10.1088/0508-3443/3/3/302	journal	March 1952
Developments in the aluminum metal matrix composites reinforced by micro/nano particles – A review Bhoi, Neeraj K.; Singh, Harpreet; Pratap, Saurabh Journal of Composite Materials, Vol. 54, Issue 6 https://doi.org/10.1177/0021998319865307	journal	July 2019
Elastic phase-strain distribution in a particulate-reinforced metal-matrix composite deforming by slip or creep Daymond, Mark R.; Lund, Christian; Bourke, Mark A. M. Metallurgical and Materials Transactions A, Vol. 30, Issue 11 https://doi.org/10.1007/s11661-999-0136-3	journal	November 1999
Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle . Reuss, A. ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 9, Issue 1 https://doi.org/10.1002/zamm.19290090104	journal	January 1929
Residual stresses in random-planar aluminium/Saffil® short-fibre composites deformed in different loading modes Garces, Gerardo; Bruno, Giovanni; Wanner, Alexander International Journal of Materials Research, Vol. 97, Issue 10 https://doi.org/10.3139/146.101372	journal	October 2006
Identification of Residual Stress Phenomena Based on the Hole Drilling Method in Explosively Welded Steel-Titanium Composite Karolczuk, A.; Kowalski, M.; Kluger, K. Archives of Metallurgy and Materials, Vol. 59, Issue 3 https://doi.org/10.2478/amm-2014-0195	journal	October 2014
The influence of residual stress on the yielding of metal matrix composites Zahl, D. B.; McMeeking, R. M. Acta Metallurgica et Materialia, Vol. 39, Issue 6 https://doi.org/10.1016/0956-7151(91)90199-B	journal	June 1991
Methods of measuring residual stresses in components Rossini, N. S.; Dassisti, M.; Benyounis, K. Y. Materials & Design, Vol. 35 https://doi.org/10.1016/j.matdes.2011.08.022	journal	March 2012
Neutron Diffraction Study of Phase Stresses in Al/SiCp Composite During Tensile Test Gadalińska, Elżbieta; Baczmański, Andrzej; Wroński, Sebastian Metals and Materials International, Vol. 25, Issue 3 https://doi.org/10.1007/s12540-018-00218-7	journal	November 2018
Effect of microstructure on mechanical properties and residual stresses in interpenetrating aluminum-alumina composites fabricated by squeeze casting Maj, Justyna; Basista, Michał; Węglewski, Witold Materials Science and Engineering: A, Vol. 715 https://doi.org/10.1016/j.msea.2017.12.091	journal	February 2018
Mechanical and Tribological Properties of Metal Matrix Composites Reinforced with Short Carbon Fibre Łągiewka, M. Archives of Metallurgy and Materials, Vol. 59, Issue 2 https://doi.org/10.2478/amm-2014-0116	journal	June 2014
Microstructures and mechanical properties of pure Al matrix composites reinforced by Al;Cu;Fe alloy particles Tang, F.; Anderson, I. E.; Biner, S. B. Materials Science and Engineering: A, Vol. 363, Issue 1-2 https://doi.org/10.1016/S0921-5093(03)00433-7	journal	December 2003
Size dependent strengthening in particle reinforced aluminium Kouzeli, M.; Mortensen, A. Acta Materialia, Vol. 50, Issue 1 https://doi.org/10.1016/S1359-6454(01)00327-5	journal	January 2002
In Situ Characterization of Internal Damage in TRIP-Steel/Mg-PSZ Composites under Compressive Stress Using X-Ray Computed Tomography Berek, Harry; Ballaschk, Uta; Aneziris, Christos G. Advanced Engineering Materials, Vol. 13, Issue 12 https://doi.org/10.1002/adem.201100117	journal	July 2011
Influence of thermal residual stresses on the composite macroscopic behavior Hu, G. K.; Weng, G. J. Mechanics of Materials, Vol. 27, Issue 4 https://doi.org/10.1016/S0167-6636(97)00050-1	journal	April 1998
Optical measurements of thermal residual stresses in alumina reinforced with chromium Krajewski, Marcin; Węglewski, Witold; Bochenek, Kamil Journal of Applied Physics, Vol. 125, Issue 13 https://doi.org/10.1063/1.5083115	journal	April 2019
Development of metal matrix composites by laser-assisted additive manufacturing technologies: a review Shi, Jing; Wang, Yachao Journal of Materials Science, Vol. 55, Issue 23 https://doi.org/10.1007/s10853-020-04730-3	journal	May 2020
Effect of tool nose radius and tool wear on residual stresses distribution while turning in situ TiB2/7050 Al metal matrix composites Lin, Kunyang; Wang, Wenhu; Jiang, Ruisong The International Journal of Advanced Manufacturing Technology, Vol. 100, Issue 1-4 https://doi.org/10.1007/s00170-018-2742-y	journal	September 2018
Residual stress induced mechanical property enhancement in steel encapsulated light metal matrix composites Fudger, Sean; Sediako, Dimitry; Karandikar, Prashant Materials Science and Engineering: A, Vol. 699 https://doi.org/10.1016/j.msea.2017.05.073	journal	June 2017
Effects of manufacturing environments on the residual stresses in a SiC/Ti metal-matrix composite Aghdam, Mohammad Mohammadi; Morsali, Seyed Reza Science and Engineering of Composite Materials, Vol. 24, Issue 6 https://doi.org/10.1515/secm-2015-0089	journal	November 2017
Processing and characterization of elastic and thermal expansion behaviour of interpenetrating Al12Si/alumina composites Roy, Siddhartha; Schell, Karl Günter; Bucharsky, Ethel Claudia Materials Science and Engineering: A, Vol. 743 https://doi.org/10.1016/j.msea.2018.11.100	journal	January 2019
Effects of manufacturing parameters on residual stresses in SiC/Ti composites by an elastic–viscoplastic micromechanical model Aghdam, M. M.; Morsali, S. R. Computational Materials Science, Vol. 91 https://doi.org/10.1016/j.commatsci.2014.04.026	journal	August 2014
Anomalous size effect in thermal residual stresses in pressure sintered alumina-chromium composites Węglewski, Witold; Krajewski, Marcin; Bochenek, Kamil Materials Science and Engineering: A, Vol. 762 https://doi.org/10.1016/j.msea.2019.138111	journal	August 2019
Texture Investigations by Neutron Time-of-Flight Diffraction Feldmann, K. Textures and Microstructures, Vol. 10, Issue 4 https://doi.org/10.1155/TSM.10.309	journal	January 1989
Three-dimensional visualization and microstructure-based modeling of deformation in particle-reinforced composites Chawla, N.; Sidhu, R.; Ganesh, V. Acta Materialia, Vol. 54, Issue 6 https://doi.org/10.1016/j.actamat.2005.11.027	journal	April 2006
Synchrotron X-ray diffraction measurements of internal stresses during loading of steel-based metal matrix composites reinforced with TiB2 particles Bacon, D. H.; Edwards, L.; Moffatt, J. E. Acta Materialia, Vol. 59, Issue 9 https://doi.org/10.1016/j.actamat.2011.02.012	journal	May 2011

Similar Records

Review on study of internal load transfer in metal matrix composites using diffraction techniques

Journal Article · 2022 · Mat. Sci. Eng. A · OSTI ID:1865465

A study of internal damage of metal matrix composites by neutron diffraction

Conference · 1994 · OSTI ID:10115383

The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites

Journal Article · 1992 · Acta Metallurgica et Materialia; (United States) · OSTI ID:6906142

Review on study of internal load transfer in metal matrix composites using diffraction techniques

Citation Formats

References (164)

Similar Records

Related Subjects