The nature of yielding and anelasticity in metals

Li, Dayong; Wagoner, Robert H.

doi:10.1016/j.actamat.2021.116625

The nature of yielding and anelasticity in metals

Journal Article · 01 March 2021 · Acta Materialia

DOI:https://doi.org/10.1016/j.actamat.2021.116625· OSTI ID:1851648

Li, Dayong;

Not provided.

Research Organization:: The Ohio State Univ., Columbus, OH (United States); Brigham Young Univ., Provo, UT (United States)

Sponsoring Organization:: USDOE Office of Science (SC)

DOE Contract Number:: SC0012483; SC0012587

OSTI ID:: 1851648

Journal Information:: Acta Materialia, Vol. 206, Issue C; ISSN 1359-6454

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

References (65)

On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software Morestin, Fabrice; Boivin, Maurice Nuclear Engineering and Design, Vol. 162, Issue 1 https://doi.org/10.1016/0029-5493(95)01123-4	journal	March 1996
Finite element analysis of tailor-welded blanks Zhao, K. M.; Chun, B. K.; Lee, J. K. Finite Elements in Analysis and Design, Vol. 37, Issue 2 https://doi.org/10.1016/S0168-874X(00)00026-3	journal	February 2001
Role of plastic anisotropy and its evolution on springback Geng, Lumin; Wagoner, R. H. International Journal of Mechanical Sciences, Vol. 44, Issue 1 https://doi.org/10.1016/S0020-7403(01)00085-6	journal	January 2002
Inelastic effects on springback in metals Cleveland, R. M.; Ghosh, A. K. International Journal of Plasticity, Vol. 18, Issue 5-6 https://doi.org/10.1016/S0749-6419(01)00054-7	journal	October 2002
Elastic and Inelastic Recovery After Plastic Deformation of DQSK Steel Sheet Luo, Limin; Ghosh, Amit K. Journal of Engineering Materials and Technology, Vol. 125, Issue 3 https://doi.org/10.1115/1.1491574	journal	July 2003
Study of the Inelastic Response of TRIP Steels after Plastic Deformation PÉRez, R.; Benito, J. A.; Prado, J. M. ISIJ International, Vol. 45, Issue 12 https://doi.org/10.2355/isijinternational.45.1925	journal	January 2005
A physically-based constitutive model for metal deformation Ghosh, A. K. Acta Metallurgica, Vol. 28, Issue 11 https://doi.org/10.1016/0001-6160(80)90046-2	journal	November 1980
Determination of the anelastic modulus for several metals Alexopoulos, P. S.; Cho, C. W.; Hu, C. P. Acta Metallurgica, Vol. 29, Issue 4 https://doi.org/10.1016/0001-6160(81)90138-3	journal	April 1981
Problems in Non‐Elastic Deformation of Metals Zener, Clarence; Hollomon, J. H. Journal of Applied Physics, Vol. 17, Issue 2 https://doi.org/10.1063/1.1707696	journal	February 1946
Anelasticity of metals Zener, C. Il Nuovo Cimento, Vol. 7, Issue S2 https://doi.org/10.1007/BF02751494	journal	September 1958
Complex unloading behavior: Nature of the deformation and its consistent constitutive representation Sun, Li; Wagoner, R. H. International Journal of Plasticity, Vol. 27, Issue 7 https://doi.org/10.1016/j.ijplas.2010.12.003	journal	July 2011
The elastic–plastic transition of metals Chen, Zhong; Bong, Hyuk Jong; Li, Dayong International Journal of Plasticity, Vol. 83 https://doi.org/10.1016/j.ijplas.2016.04.009	journal	August 2016
Variation and consistency of Young’s modulus in steel Chen, Zhong; Gandhi, Umesh; Lee, Jinwoo Journal of Materials Processing Technology, Vol. 227 https://doi.org/10.1016/j.jmatprotec.2015.08.024	journal	January 2016
Tensile testing of Fe and FeCr nanowires using molecular dynamics simulations Byggmästar, J.; Granberg, F.; Kuronen, A. Journal of Applied Physics, Vol. 117, Issue 1 https://doi.org/10.1063/1.4905314	journal	January 2015
Molecular dynamics simulations on tensile behaviors of single-crystal bcc Fe nanowire: effects of strain rates and thermal environment Li, Lili; Han, Ming Applied Physics A, Vol. 123, Issue 6 https://doi.org/10.1007/s00339-017-1062-7	journal	May 2017
Atomistic uniaxial tension tests: investigating various many-body potentials for their ability to produce accurate stress strain curves using molecular dynamics simulations Morrissey, Liam S.; Handrigan, Stephen M.; Subedi, Sabir Molecular Simulation, Vol. 45, Issue 6 https://doi.org/10.1080/08927022.2018.1557333	journal	December 2018
Experimental in-situ verification of the unloading mechanics of dual phase steels Kupke, A.; Madej, L.; Hodgson, P. D. Materials Science and Engineering: A, Vol. 760 https://doi.org/10.1016/j.msea.2019.05.091	journal	July 2019
On the nonlinear anelastic behavior of AHSS Torkabadi, A.; Perdahcıoğlu, E. S.; Meinders, V. T. International Journal of Solids and Structures, Vol. 151 https://doi.org/10.1016/j.ijsolstr.2017.03.009	journal	October 2018
Quantification of dislocation structures from anelastic deformation behaviour Arechabaleta, Zaloa; van Liempt, Peter; Sietsma, Jilt Acta Materialia, Vol. 115 https://doi.org/10.1016/j.actamat.2016.05.040	journal	August 2016
Nonlinear elastic behaviors of low and high strength steels in unloading and reloading Kim, Hyunjin; Kim, Chongmin; Barlat, Frédéric Materials Science and Engineering: A, Vol. 562 https://doi.org/10.1016/j.msea.2012.11.020	journal	February 2013
Springback simulation of advanced high strength steels considering nonlinear elastic unloading–reloading behavior Ghaei, A.; Green, D. E.; Aryanpour, A. Materials & Design, Vol. 88 https://doi.org/10.1016/j.matdes.2015.09.012	journal	December 2015
A new approach for the determination of the linear elastic modulus from uniaxial tensile tests of sheet metals Suttner, Sebastian; Merklein, Marion Journal of Materials Processing Technology, Vol. 241 https://doi.org/10.1016/j.jmatprotec.2016.10.024	journal	March 2017
Experimental and finite element analysis on oscillating cold forming in consideration of nonlinear loading-unloading-reloading behavior Ben, Ning-yu; Zhang, Qi; Choi, Hongjin Journal of Manufacturing Processes, Vol. 36 https://doi.org/10.1016/j.jmapro.2018.10.043	journal	December 2018
Characterisation and modelling of in-plane springback in a commercially pure titanium (CP-Ti) Khayatzadeh, S.; Thomas, M. J.; Millet, Y. Journal of Materials Science, Vol. 53, Issue 9 https://doi.org/10.1007/s10853-017-1983-8	journal	January 2018
Piecewise linear approximation of nonlinear unloading-reloading behaviors using a multi-surface approach Lee, Jeong-Yeon; Lee, Myoung-Gyu; Barlat, Frédéric International Journal of Plasticity, Vol. 93 https://doi.org/10.1016/j.ijplas.2017.02.004	journal	June 2017
A generalized thermodynamic approach for modeling nonlinear hardening behaviors Xiao, Yuzhong; Chen, Jun; Cao, Jian International Journal of Plasticity, Vol. 38 https://doi.org/10.1016/j.ijplas.2012.05.004	journal	November 2012
Evaluating the significance of hardening behavior and unloading modulus under strain reversal in sheet springback prediction Zang, Shun-lai; Lee, Myoung-gyu; Hoon Kim, Ji International Journal of Mechanical Sciences, Vol. 77 https://doi.org/10.1016/j.ijmecsci.2013.09.033	journal	December 2013
Constitutive and friction modeling for accurate springback analysis of advanced high strength steel sheets Lee, Jeong-Yeon; Barlat, Frédéric; Lee, Myoung-Gyu International Journal of Plasticity, Vol. 71 https://doi.org/10.1016/j.ijplas.2015.04.005	journal	August 2015
Experimental assessment of nonlinear elastic behaviour of dual-phase steels and application to springback prediction Xue, Xin; Liao, Juan; Vincze, Gabriela International Journal of Mechanical Sciences, Vol. 117 https://doi.org/10.1016/j.ijmecsci.2016.08.003	journal	October 2016
On the non-linear unloading behavior of a biaxially loaded dual-phase steel sheet Deng, Nengxiu; Kuwabara, Toshihiko; Korkolis, Yannis P. International Journal of Mechanical Sciences, Vol. 138-139 https://doi.org/10.1016/j.ijmecsci.2018.02.015	journal	April 2018
A new strategy to describe nonlinear elastic and asymmetric plastic behaviors with one yield surface Lee, Eun-Ho; Stoughton, Thomas B.; Yoon, Jeong Whan International Journal of Plasticity, Vol. 98 https://doi.org/10.1016/j.ijplas.2017.08.003	journal	November 2017
New formulation of nonlinear kinematic hardening model, Part I: A Dirac delta function approach Okorokov, Volodymyr; Gorash, Yevgen; Mackenzie, Donald International Journal of Plasticity, Vol. 122 https://doi.org/10.1016/j.ijplas.2019.07.006	journal	November 2019
An RVE procedure for micromechanical prediction of mechanical behavior of dual-phase steel Bong, Hyuk Jong; Lim, Hojun; Lee, Myoung-Gyu Materials Science and Engineering: A, Vol. 695 https://doi.org/10.1016/j.msea.2017.04.032	journal	May 2017
A predictive strain-gradient model with no undetermined constants or length scales Zhou, G.; Jeong, W.; Homer, E. R. Journal of the Mechanics and Physics of Solids, Vol. 145 https://doi.org/10.1016/j.jmps.2020.104178	journal	December 2020
“Region of constant flow stress” during compression of aluminium polycrystals prestrained by tension Hasegawa, T.; Yakou, T. Scripta Metallurgica, Vol. 8, Issue 8 https://doi.org/10.1016/0036-9748(74)90390-1	journal	August 1974
Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminium Hasegawa, T.; Yakou, T.; Karashima, S. Materials Science and Engineering, Vol. 20 https://doi.org/10.1016/0025-5416(75)90159-7	journal	January 1975
Stagnation of Strain Hardening During Reversed Straining of Prestrained Aluminium, Copper and Iron Yakou, Takao; Hasegawa, Tadashi; Karashima, Seiichi Transactions of the Japan Institute of Metals, Vol. 26, Issue 2 https://doi.org/10.2320/matertrans1960.26.88	journal	January 1985
Work-hardening behavior of mild steel under stress reversal at large strains Hu, Zaiqian; Rauch, Edgar Fernand; Teodosiu, Cristian International Journal of Plasticity, Vol. 8, Issue 7 https://doi.org/10.1016/0749-6419(92)90006-X	journal	January 1992
Elastic–plastic behavior of steel sheets under in-plane cyclic tension–compression at large strain Yoshida, Fusahito; Uemori, Takeshi; Fujiwara, Kenji International Journal of Plasticity, Vol. 18, Issue 5-6 https://doi.org/10.1016/S0749-6419(01)00049-3	journal	October 2002
A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation Yoshida, Fusahito; Uemori, Takeshi International Journal of Plasticity, Vol. 18, Issue 5-6 https://doi.org/10.1016/S0749-6419(01)00050-X	journal	October 2002
A model of large-strain cyclic plasticity and its application to springback simulation Yoshida, F.; Uemori, T. International Journal of Mechanical Sciences, Vol. 45, Issue 10 https://doi.org/10.1016/j.ijmecsci.2003.10.013	journal	October 2003
Long range internal stresses in single-phase crystalline materials Kassner, M. E.; Geantil, P.; Levine, L. E. International Journal of Plasticity, Vol. 45 https://doi.org/10.1016/j.ijplas.2012.10.003	journal	June 2013
Non-linear Deformation Behavior during Unloading in Various Metal Sheets Hama, Takayuki; Matsudai, Ryogo; Kuchinomachi, Yota ISIJ International, Vol. 55, Issue 5 https://doi.org/10.2355/isijinternational.55.1067	journal	January 2015
Constitutive modeling for path-dependent behavior and its influence on twist springback Liao, Juan; Xue, Xin; Lee, Myoung-Gyu International Journal of Plasticity, Vol. 93 https://doi.org/10.1016/j.ijplas.2017.02.009	journal	June 2017
Improvement of springback prediction accuracy by considering nonlinear elastoplastic behavior after stress reversal Sumikawa, S.; Ishiwatari, A.; Hiramoto, J. Journal of Materials Processing Technology, Vol. 241 https://doi.org/10.1016/j.jmatprotec.2016.11.005	journal	March 2017
Observations on the Nonlinear Unloading Behavior of Advanced High Strength Steels Pavlina, Erik J.; Lee, Myoung-Gyu; Barlat, Frédéric Metallurgical and Materials Transactions A, Vol. 46, Issue 1 https://doi.org/10.1007/s11661-014-2688-0	journal	December 2014
Impact of second phase morphology and orientation on the plastic behavior of dual-phase steels Ismail, Karim; Perlade, Astrid; Jacques, Pascal J. International Journal of Plasticity, Vol. 118 https://doi.org/10.1016/j.ijplas.2019.02.005	journal	July 2019
Relativistic effect inducing drag on fast-moving dislocation in discrete system Kim, Soon; Kim, Hokun; Kang, Keonwook International Journal of Plasticity, Vol. 126 https://doi.org/10.1016/j.ijplas.2019.11.008	journal	March 2020
An investigation of geometrically necessary dislocations and back stress in large grained tantalum via EBSD and CPFEM Hansen, Landon T.; Fullwood, David T.; Homer, Eric R. Materials Science and Engineering: A, Vol. 772 https://doi.org/10.1016/j.msea.2019.138704	journal	January 2020
A practical constitutive model for AZ31B Mg alloy sheets with unusual stress–strain response Nguyen, Ngoc-Trung; Lee, Myoung-Gyu; Kim, Ji Hoon Finite Elements in Analysis and Design, Vol. 76 https://doi.org/10.1016/j.finel.2013.08.008	journal	November 2013
Mechanism-based constitutive modeling of ZEK100 magnesium alloy with crystal plasticity and in-situ HEXRD experiment Bong, Hyuk Jong; Hu, Xiaohua; Sun, Xin International Journal of Plasticity, Vol. 113 https://doi.org/10.1016/j.ijplas.2018.09.005	journal	February 2019
Anelasticity of die-cast magnesium-aluminium based alloys under different strain rates Ang, Hua Qian; Abbott, Trevor B.; Zhu, Suming Materials Science and Engineering: A, Vol. 707 https://doi.org/10.1016/j.msea.2017.09.012	journal	November 2017
Implementation and application of a temperature-dependent Chaboche model Zhou, C.; Chen, Z.; Lee, J. W. International Journal of Plasticity, Vol. 75 https://doi.org/10.1016/j.ijplas.2015.03.002	journal	December 2015
Effective method for fitting complex constitutive equations Smith, A.; Chen, Z.; Lee, J. Y. International Journal of Plasticity, Vol. 58 https://doi.org/10.1016/j.ijplas.2014.01.005	journal	July 2014
An improved test for shear fracture Li, D. Y.; Chen, Z.; Sun, L. International Journal of Solids and Structures, Vol. 97-98 https://doi.org/10.1016/j.ijsolstr.2016.08.002	journal	October 2016
Properties controlling the bend-assisted fracture of AHSS Lee, J.; Kim, J. H.; Lee, M. G. International Journal of Plasticity, Vol. 75 https://doi.org/10.1016/j.ijplas.2015.03.009	journal	December 2015
Extension of quasi-plastic–elastic approach to incorporate complex plastic flow behavior – application to springback of advanced high-strength steels Lee, Jinwoo; Lee, Jeong-Yeon; Barlat, Frédéric International Journal of Plasticity, Vol. 45 https://doi.org/10.1016/j.ijplas.2013.01.011	journal	June 2013
A physically based yield criterion I. Determination of the yield stress based on analysis of pre-yield dislocation behaviour van Liempt, Peter; Sietsma, Jilt Materials Science and Engineering: A, Vol. 662 https://doi.org/10.1016/j.msea.2016.03.013	journal	April 2016
Development of a Mn-Si-Cr-Mo as-rolled dual-phase steel Coldren, A. P.; Tither, G. JOM, Vol. 30, Issue 4 https://doi.org/10.1007/BF03354351	journal	April 1978
Early stages of yielding and strain aging of a vanadium-containing dual-phase steel Davies, R. G. Metallurgical Transactions A, Vol. 10, Issue 10 https://doi.org/10.1007/BF02812021	journal	October 1979
Can a simple heat treatment help to save Detroit? Owen, W. S. Metals Technology, Vol. 7, Issue 1 https://doi.org/10.1179/030716980803286649	journal	January 1980
Role of internal stress for continuous yielding of dual-phase steels Sakaki, T.; Sugimoto, K.; Fukuzato, T. Acta Metallurgica, Vol. 31, Issue 10 https://doi.org/10.1016/0001-6160(83)90172-4	journal	October 1983
Mechanism-based strain gradient plasticity? I. Theory Gao, H. Journal of the Mechanics and Physics of Solids, Vol. 47, Issue 6 https://doi.org/10.1016/S0022-5096(98)00103-3	journal	April 1999
A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations Gurtin, Morton E. Journal of the Mechanics and Physics of Solids, Vol. 50, Issue 1 https://doi.org/10.1016/S0022-5096(01)00104-1	journal	January 2002
A finite deformation theory of higher-order gradient crystal plasticity Kuroda, Mitsutoshi; Tvergaard, Viggo Journal of the Mechanics and Physics of Solids, Vol. 56, Issue 8 https://doi.org/10.1016/j.jmps.2008.03.010	journal	August 2008

Similar Records

The nature of yielding and anelasticity in metals

Journal Article · 2021 · Acta Materialia · OSTI ID:1865472

Li, Dayong; Wagoner, Robert H.

New Mechanism for Yield Point Phenomena

Journal Article · 2021 · Journal of Engineering Materials and Technology · OSTI ID:1865470

Zhou, G.; Fullwood, D. T.; Carroll, J. D.; +3 more

Related Subjects

Materials Science
Metallurgy & Metallurgical Engineering

The nature of yielding and anelasticity in metals

Citation Formats

References (65)

Similar Records

Related Subjects