Tube equal channel angular extrusion (tECAE) of Mg–3Al–1Zn alloy

Srivastava, Abhinav; Vaughan, Matthew W.; Mansoor, Bilal; Nasim, Wahaz; Barber, Robert E.; Karaman, Ibrahim; Hartwig, Karl T.

doi:10.1016/j.msea.2021.141236

Tube equal channel angular extrusion (tECAE) of Mg–3Al–1Zn alloy

Journal Article · 01 May 2021 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2021.141236· OSTI ID:1850994

; Vaughan, Matthew W.; Mansoor, Bilal; Nasim, Wahaz; Barber, Robert E.; Karaman, Ibrahim; Hartwig, Karl T.

Not provided.

Research Organization:: Shear Form, Inc., Bryan, TX (United States)

Sponsoring Organization:: USDOE Office of Science (SC)

DOE Contract Number:: SC0007601

OSTI ID:: 1850994

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Vol. 814, Issue C; ISSN 0921-5093

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

References (57)

Magnesium alloy applications in automotive structures Easton, Mark; Beer, Aiden; Barnett, Matthew JOM, Vol. 60, Issue 11 https://doi.org/10.1007/s11837-008-0150-8	journal	November 2008
Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing Al-Maharbi, Majid; Karaman, Ibrahim; Beyerlein, Irene J. Materials Science and Engineering: A, Vol. 528, Issue 25-26 https://doi.org/10.1016/j.msea.2011.06.043	journal	September 2011
Biodegradable Magnesium Alloys: A Review of Material Development and Applications Persaud-Sharma, Dharam; McGoron, Anthony Journal of Biomimetics, Biomaterials and Tissue Engineering, Vol. 12 https://doi.org/10.4028/www.scientific.net/JBBTE.12.25	journal	February 2012
Recent advances on the development of magnesium alloys for biodegradable implants Chen, Yongjun; Xu, Zhigang; Smith, Christopher Acta Biomaterialia, Vol. 10, Issue 11 https://doi.org/10.1016/j.actbio.2014.07.005	journal	November 2014
Reprint of: The history of biodegradable magnesium implants: A review Witte, Frank Acta Biomaterialia, Vol. 23 https://doi.org/10.1016/j.actbio.2015.07.017	journal	September 2015
AM30 porthole die extrusions—A comparison with circular seamless extruded tubes Sikand, Rajiv; Kumar, Arun M.; Sachdev, Anil K. Journal of Materials Processing Technology, Vol. 209, Issue 18-19 https://doi.org/10.1016/j.jmatprotec.2009.07.023	journal	September 2009
Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy Ding, Hanlin; Liu, Liufa; Kamado, Shigeharu Journal of Alloys and Compounds, Vol. 456, Issue 1-2 https://doi.org/10.1016/j.jallcom.2007.02.045	journal	May 2008
Effect of grain size on prismatic slip in Mg–3Al–1Zn alloy Razavi, S. M.; Foley, D. C.; Karaman, I. Scripta Materialia, Vol. 67, Issue 5 https://doi.org/10.1016/j.scriptamat.2012.05.017	journal	September 2012
Materials processing by simple shear Segal, V. M. Materials Science and Engineering: A, Vol. 197, Issue 2 https://doi.org/10.1016/0921-5093(95)09705-8	journal	July 1995
Using high-pressure torsion for metal processing: Fundamentals and applications Zhilyaev, A.; Langdon, T. Progress in Materials Science, Vol. 53, Issue 6 https://doi.org/10.1016/j.pmatsci.2008.03.002	journal	August 2008
Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process Saito, Y.; Utsunomiya, H.; Tsuji, N. Acta Materialia, Vol. 47, Issue 2 https://doi.org/10.1016/S1359-6454(98)00365-6	journal	January 1999
Room temperature equal-channel angular pressing of a magnesium alloy Gu, C. F.; Tóth, L. S.; Field, D. P. Acta Materialia, Vol. 61, Issue 8 https://doi.org/10.1016/j.actamat.2013.01.063	journal	May 2013
Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression Zhang, Hua; Yan, Yan; Fan, Jianfeng Materials Science and Engineering: A, Vol. 618 https://doi.org/10.1016/j.msea.2014.09.066	journal	November 2014
Microstructure and mechanical properties in an AZ31 magnesium alloy sheet fabricated by asymmetric hot extrusion Chang, L. L.; Wang, Y. N.; Zhao, X. Materials Science and Engineering: A, Vol. 496, Issue 1-2 https://doi.org/10.1016/j.msea.2008.06.015	journal	November 2008
Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties Saray, O.; Purcek, G.; Karaman, I. Materials Science and Engineering: A, Vol. 528, Issue 21 https://doi.org/10.1016/j.msea.2011.05.014	journal	August 2011
Reduction in tension–compression asymmetry via grain refinement and texture design in Mg–3Al–1Zn sheets Dogan, E.; Karaman, I.; Ayoub, G. Materials Science and Engineering: A, Vol. 610 https://doi.org/10.1016/j.msea.2014.04.112	journal	July 2014
Enhanced ductility in strongly textured magnesium produced by equal channel angular processing Agnew, S. R.; Horton, J. A.; Lillo, T. M. Scripta Materialia, Vol. 50, Issue 3 https://doi.org/10.1016/j.scriptamat.2003.10.006	journal	February 2004
The role of heat treatment on the cyclic stress–strain response of ultrafine-grained interstitial-free steel Niendorf, T.; Canadinc, D.; Maier, H. J. International Journal of Fatigue, Vol. 30, Issue 3 https://doi.org/10.1016/j.ijfatigue.2007.04.015	journal	March 2008
Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy Dogan, E.; Vaughan, M. W.; Wang, S. J. Acta Materialia, Vol. 89 https://doi.org/10.1016/j.actamat.2014.12.006	journal	May 2015
Dynamic precipitation in Mg-3Al-1Zn alloy during different plastic deformation modes Dogan, E.; Wang, S.; Vaughan, M. W. Acta Materialia, Vol. 116 https://doi.org/10.1016/j.actamat.2016.06.011	journal	September 2016
Microstructure and Mechanical Properties of Heavily Worked and Recrystallized Copper for Low-Temperature Superconductor Applications Springs, Jason C.; Srivastava, Abhinav; Levin, Zach S. IEEE Transactions on Applied Superconductivity, Vol. 27, Issue 4 https://doi.org/10.1109/TASC.2017.2651397	journal	June 2017
Effect of severe ausforming via equal channel angular extrusion on the shape memory response of a NiTi alloy Kockar, B.; Karaman, I.; Kulkarni, A. Journal of Nuclear Materials, Vol. 361, Issue 2-3 https://doi.org/10.1016/j.jnucmat.2006.12.007	journal	April 2007
Effect of commercial purity levels on the mechanical properties of ultrafine-grained titanium Purcek, G.; Yapici, G. G.; Karaman, I. Materials Science and Engineering: A, Vol. 528, Issue 6 https://doi.org/10.1016/j.msea.2010.11.021	journal	March 2011
Severe plastic deformation of metals by high-pressure tube twisting Toth, L.; Arzaghi, M.; Fundenberger, J. Scripta Materialia, Vol. 60, Issue 3 https://doi.org/10.1016/j.scriptamat.2008.09.029	journal	February 2009
Tubular channel angular pressing (TCAP) as a novel severe plastic deformation method for cylindrical tubes Faraji, Ghader; Mashhadi, Mahmoud Mosavi; Kim, Hyoung Seop Materials Letters, Vol. 65, Issue 19-20 https://doi.org/10.1016/j.matlet.2011.06.039	journal	October 2011
Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes Faraji, Ghader; Babaei, Alireza; Mashhadi, Mahmoud Mosavi Materials Letters, Vol. 77 https://doi.org/10.1016/j.matlet.2012.03.007	journal	June 2012
Principles of severe plastic deformation using tube high-pressure shearing Wang, Jing Tao; Li, Zheng; Wang, Jin Scripta Materialia, Vol. 67, Issue 10 https://doi.org/10.1016/j.scriptamat.2012.07.028	journal	November 2012
Review of principles and methods of severe plastic deformation for producing ultrafine-grained tubes Faraji, G.; Kim, H. S. Materials Science and Technology, Vol. 33, Issue 8 https://doi.org/10.1080/02670836.2016.1215064	journal	August 2016
Equal Channel Angular Extrusion of Tubular Aluminum Alloy Specimens—Analysis of Extrusion Pressures and Mechanical Properties Nagasekhar, A. V.; Chakkingal, Uday; Venugopal, P. Journal of Manufacturing Processes, Vol. 8, Issue 2 https://doi.org/10.1016/S1526-6125(06)80006-X	journal	January 2006
Experimental investigation of three different tube equal channel angular pressing techniques Djavanroodi, F.; Zolfaghari, A. A.; Ebrahimi, M. Metallic Materials, Vol. 53, Issue 01 https://doi.org/10.4149/km_2015_1_27	journal	January 2016
Severe plastic deformation of tubular AA 6061 via equal channel angular pressing Jafarlou, D. M.; Zalnezhad, E.; Hassan, M. A. Materials & Design, Vol. 90 https://doi.org/10.1016/j.matdes.2015.11.026	journal	January 2016
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys Lebensohn, R. A.; Tomé, C. N. Acta Metallurgica et Materialia, Vol. 41, Issue 9 https://doi.org/10.1016/0956-7151(93)90130-K	journal	September 1993
A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals Lebensohn, R. A.; Tomé, C. N. Materials Science and Engineering: A, Vol. 175, Issue 1-2 https://doi.org/10.1016/0921-5093(94)91047-2	journal	February 1994
Principles of equal-channel angular pressing as a processing tool for grain refinement Valiev, Ruslan Z.; Langdon, Terence G. Progress in Materials Science, Vol. 51, Issue 7 https://doi.org/10.1016/j.pmatsci.2006.02.003	journal	September 2006
In situ composites processed by simple shear Segal, V. M.; Hartwig, K. T.; Goforth, R. E. Materials Science and Engineering: A, Vol. 224, Issue 1-2 https://doi.org/10.1016/S0921-5093(96)10539-6	journal	March 1997
Grain refinement vs. crystallographic texture: Mechanical anisotropy in a magnesium alloy Foley, D. C.; Al-Maharbi, M.; Hartwig, K. T. Scripta Materialia, Vol. 64, Issue 2 https://doi.org/10.1016/j.scriptamat.2010.09.042	journal	January 2011
Development and application of MIPAR™: a novel software package for two- and three-dimensional microstructural characterization Sosa, John M.; Huber, Daniel E.; Welk, Brian Integrating Materials and Manufacturing Innovation, Vol. 3, Issue 1 https://doi.org/10.1186/2193-9772-3-10	journal	April 2014
Evaluation of Strain Rate During Equal-channel Angular Pressing Kim, Hyoung Seop Journal of Materials Research, Vol. 17, Issue 1 https://doi.org/10.1557/JMR.2002.0026	journal	January 2002
A model for texture development dominated by deformation twinning: Application to zirconium alloys Tomé, C. N.; Lebensohn, R. A.; Kocks, U. F. Acta Metallurgica et Materialia, Vol. 39, Issue 11 https://doi.org/10.1016/0956-7151(91)90083-D	journal	November 1991
Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions Kabirian, Farhoud; Khan, Akhtar S.; Gnäupel-Herlod, Thomas International Journal of Plasticity, Vol. 68 https://doi.org/10.1016/j.ijplas.2014.10.012	journal	May 2015
Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn Vaughan, M. W.; Nasim, W.; Dogan, E. Acta Materialia, Vol. 168 https://doi.org/10.1016/j.actamat.2019.02.010	journal	April 2019
Deformation twinning in AZ31: Influence on strain hardening and texture evolution Knezevic, Marko; Levinson, Amanda; Harris, Ryan Acta Materialia, Vol. 58, Issue 19 https://doi.org/10.1016/j.actamat.2010.07.041	journal	November 2010
Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium Biswas, Somjeet; Brokmeier, H. -G.; Fundenberger, J. -J. Materials Characterization, Vol. 102 https://doi.org/10.1016/j.matchar.2015.02.021	journal	April 2015
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B Agnew, Sean R.; Duygulu, Özgür International Journal of Plasticity, Vol. 21, Issue 6 https://doi.org/10.1016/j.ijplas.2004.05.018	journal	June 2005
Grain refinement and mechanical behavior of a magnesium alloy processed by ECAP Figueiredo, Roberto B.; Langdon, Terence G. Journal of Materials Science, Vol. 45, Issue 17 https://doi.org/10.1007/s10853-010-4589-y	journal	May 2010
Production of ultrafine-grain microstructure in Mg alloy by alternate biaxial reverse corrugation Yang, Q.; Ghosh, A. K. Acta Materialia, Vol. 54, Issue 19 https://doi.org/10.1016/j.actamat.2006.06.045	journal	November 2006
Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet Jain, A.; Agnew, S. R. Materials Science and Engineering: A, Vol. 462, Issue 1-2 https://doi.org/10.1016/j.msea.2006.03.160	journal	July 2007
Dynamic continuous recrystallization characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet Tan, J. C.; Tan, M. J. Materials Science and Engineering: A, Vol. 339, Issue 1-2 https://doi.org/10.1016/S0921-5093(02)00096-5	journal	January 2003
Dynamic recrystallization during high temperature deformation of magnesium Al-Samman, T.; Gottstein, G. Materials Science and Engineering: A, Vol. 490, Issue 1-2 https://doi.org/10.1016/j.msea.2008.02.004	journal	August 2008
Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60 Galiyev, A.; Kaibyshev, R.; Gottstein, G. Acta Materialia, Vol. 49, Issue 7 https://doi.org/10.1016/S1359-6454(01)00020-9	journal	April 2001
Twinning and texture development in two Mg alloys subjected to loading along three different strain paths Jiang, L.; Jonas, J. J.; Mishra, R. K. Acta Materialia, Vol. 55, Issue 11 https://doi.org/10.1016/j.actamat.2007.03.006	journal	June 2007
Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals Chapuis, Adrien; Driver, Julian H. Acta Materialia, Vol. 59, Issue 5 https://doi.org/10.1016/j.actamat.2010.11.064	journal	March 2011
Twinning and the ductility of magnesium alloys Barnett, M. R. Materials Science and Engineering: A, Vol. 464, Issue 1-2 https://doi.org/10.1016/j.msea.2007.02.109	journal	August 2007
Slip, twinning, and fracture in hexagonal close-packed metals Yoo, M. H. Metallurgical Transactions A, Vol. 12, Issue 3 https://doi.org/10.1007/BF02648537	journal	March 1981
Hall–Petch relation and boundary strengthening Hansen, Niels Scripta Materialia, Vol. 51, Issue 8 https://doi.org/10.1016/j.scriptamat.2004.06.002	journal	October 2004
Grain Size Effects on Primary, Secondary, and Tertiary Twin Development in Mg-4 wt pct Li (-1 wt pct Al) Alloys Lentz, Martin; Behringer, Andreas; Fahrenson, Christoph Metallurgical and Materials Transactions A, Vol. 45, Issue 11 https://doi.org/10.1007/s11661-014-2491-y	journal	August 2014
Grain size constraints on twin expansion in hexagonal close packed crystals Arul Kumar, M.; Beyerlein, I. J.; Tomé, C. N. Journal of Applied Physics, Vol. 120, Issue 15 https://doi.org/10.1063/1.4965719	journal	October 2016

Similar Records

Tube equal channel angular extrusion (tECAE) of Mg–3Al–1Zn alloy

Journal Article · 2021 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing · OSTI ID:1774695

Srivastava, Abhinav; Vaughan, Matthew W.; Mansoor, Bilal; +4 more

Enhanced Hot Tensile Ductility of Mg-3Al-1Zn Alloy Thin-Walled Tubes Processed Via a Combined Severe Plastic Deformation

Journal Article · 2018 · Journal of Materials Engineering and Performance · OSTI ID:22860501

Fata, A.; Eftekhari, M.; Mosavi Mashhadi, M.

Related Subjects

Science & Technology - Other Topics
Materials Science
Metallurgy & Metallurgical Engineering

Tube equal channel angular extrusion (tECAE) of Mg–3Al–1Zn alloy

Citation Formats

References (57)

Similar Records

Related Subjects