Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Tailoring the Surface of Metal Halide Perovskites to Enable the Atomic Layer Deposition of Metal Oxide Contacts

Journal Article · · ACS Applied Energy Materials

Not provided.

Research Organization:
Stanford Univ., CA (United States)
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
DOE Contract Number:
EE0008084; EE0008167
OSTI ID:
1848673
Journal Information:
ACS Applied Energy Materials, Vol. 4, Issue 9; ISSN 2574-0962
Publisher:
American Chemical Society (ACS)
Country of Publication:
United States
Language:
English

References (56)

Efficient perovskite solar cells via improved carrier management February 2021
Surface passivation of perovskite film for efficient solar cells April 2019
Highly efficient planar perovskite solar cells through band alignment engineering January 2015
Overcoming Redox Reactions at Perovskite-Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells August 2020
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers October 2015
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction December 2020
Low-Temperature Nb-Doped SnO 2 Electron-Selective Contact Yields over 20% Efficiency in Planar Perovskite Solar Cells March 2018
Thermally Stable Perovskite Solar Cells by Systematic Molecular Design of the Hole-Transport Layer January 2019
Charge Transport Layers Limiting the Efficiency of Perovskite Solar Cells: How To Optimize Conductivity, Doping, and Thickness July 2019
Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability January 2018
Perovskite Solar Cells with Inorganic Electron- and Hole-Transport Layers Exhibiting Long-Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air May 2018
Enhanced Nucleation of Atomic Layer Deposited Contacts Improves Operational Stability of Perovskite Solar Cells in Air October 2019
The Molybdenum Oxide Interface Limits the High-Temperature Operational Stability of Unencapsulated Perovskite Solar Cells June 2020
The Role of Charge Selective Contacts in Perovskite Solar Cell Stability December 2018
Stabilizing halide perovskite surfaces for solar cell operation with wide-bandgap lead oxysalts August 2019
Sputtered rear electrode with broadband transparency for perovskite solar cells October 2015
Atomic layer deposition for perovskite solar cells: research status, opportunities and challenges January 2017
Hole Transport Materials in Conventional Structural (n–i–p) Perovskite Solar Cells: From Past to the Future January 2020
Recent Progress in Organic Electron Transport Materials in Inverted Perovskite Solar Cells April 2019
State‐of‐the‐Art Electron‐Selective Contacts in Perovskite Solar Cells August 2018
Perovskite solar cells employing organic charge-transport layers December 2013
C 60 as an Efficient n-Type Compact Layer in Perovskite Solar Cells June 2015
Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells December 2014
Cost Analysis of Perovskite Tandem Photovoltaics August 2018
Minimizing Current and Voltage Losses to Reach 25% Efficient Monolithic Two-Terminal Perovskite–Silicon Tandem Solar Cells August 2018
Optical modeling of wide-bandgap perovskite and perovskite/silicon tandem solar cells using complex refractive indices for arbitrary-bandgap perovskite absorbers January 2018
Barrier Design to Prevent Metal-Induced Degradation and Improve Thermal Stability in Perovskite Solar Cells June 2018
Monolithic perovskite/silicon-homojunction tandem solar cell with over 22% efficiency January 2017
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells May 2016
Atomic Layer Deposition of Functional Layers in Planar Perovskite Solar Cells October 2019
Applications of atomic layer deposition and chemical vapor deposition for perovskite solar cells January 2020
Atomic layer deposition for efficient and stable perovskite solar cells January 2019
A brief review of atomic layer deposition: from fundamentals to applications June 2014
21.6%-Efficient Monolithic Perovskite/Cu(In,Ga)Se 2 Tandem Solar Cells with Thin Conformal Hole Transport Layers for Integration on Rough Bottom Cell Surfaces January 2019
Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells January 2017
Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency June 2018
Stabilizing hybrid perovskites against moisture and temperature via non-hydrolytic atomic layer deposited overlayers January 2015
Chemical Analysis of the Interface between Hybrid Organic–Inorganic Perovskite and Atomic Layer Deposited Al 2 O 3 January 2019
Self limiting atomic layer deposition of Al 2 O 3 on perovskite surfaces: a reality? January 2016
Reaction Temperature and Partial Pressure Induced Etching of Methylammonium Lead Iodide Perovskite by Trimethylaluminum April 2019
Interfacial Effects of Tin Oxide Atomic Layer Deposition in Metal Halide Perovskite Photovoltaics June 2018
Atomic Layer Deposition of Electron Selective SnO x and ZnO Films on Mixed Halide Perovskite: Compatibility and Performance August 2017
The chemistry and energetics of the interface between metal halide perovskite and atomic layer deposited metal oxides December 2020
SnO x Atomic Layer Deposition on Bare Perovskite—An Investigation of Initial Growth Dynamics, Interface Chemistry, and Solar Cell Performance January 2021
Stabilizing the MAPbI3 perovksite via the in-situ formed lead sulfide layer for efficient and robust solar cells August 2020
Interfacial Contact Passivation for Efficient and Stable Cesium-Formamidinium Double-Cation Lead Halide Perovskite Solar Cells January 2020
Extremely Robust Gas-Quenching Deposition of Halide Perovskites on Top of Hydrophobic Hole Transport Materials for Inverted (p–i–n) Solar Cells by Targeting the Precursor Wetting Issue September 2019
Sources of Pb(0) artefacts during XPS analysis of lead halide perovskites September 2019
Properties of oxidized silicon as determined by angular-dependent X-ray photoelectron spectroscopy December 1976
The Thickogram: a method for easy film thickness measurement in XPS January 2000
Effect of F, Cl and Br doping on electrical properties of sprayed SnO2 films January 1996
Atomic Layer Deposition of Lead Sulfide Thin Films for Quantum Confinement August 2009
Electron Injection from Colloidal PbS Quantum Dots into Titanium Dioxide Nanoparticles October 2008
Photoluminescence and Photoconductivity to Assess Maximum Open-Circuit Voltage and Carrier Transport in Hybrid Perovskites and Other Photovoltaic Materials June 2018
Hybrid perovskite films approaching the radiative limit with over 90% photoluminescence quantum efficiency April 2018
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes May 2015