Study of printability and porosity formation in laser powder bed fusion built hydride-dehydride (HDH

Wu, Ziheng; Asherloo, Mohammadreza; Jiang, Runbo; Delpazir, Melody H.; Sivakumar, Nihal; Paliwal, Muktesh; Capone, Joe; Gould, Benjamin; Rollett, Anthony; Mostafaei, Amir

doi:10.1016/j.addma.2021.102323

Study of printability and porosity formation in laser powder bed fusion built hydride-dehydride (HDH

Journal Article · 01 November 2021 · Additive Manu.

DOI:https://doi.org/10.1016/j.addma.2021.102323· OSTI ID:1841194

Wu, Ziheng; Asherloo, Mohammadreza; Jiang, Runbo; Delpazir, Melody H.; Sivakumar, Nihal; Paliwal, Muktesh; Capone, Joe; Gould, Benjamin; Rollett, Anthony; Mostafaei, Amir

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)

Sponsoring Organization:: DOE - Office Of Science; DOE - BASIC ENERGY SCIENCES

OSTI ID:: 1841194

Journal Information:: Additive Manu., Vol. 47

Country of Publication:: United States

Language:: ENGLISH

References (47)

The present and future of additive manufacturing in the aerospace sector: A review of important aspects Uriondo, Adrián; Esperon-Miguez, Manuel; Perinpanayagam, Suresh Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 229, Issue 11 https://doi.org/10.1177/0954410014568797	journal	January 2015
Exploring the fabrication limits of thin-wall structures in a laser powder bed fusion process Wu, Ziheng; Narra, Sneha Prabha; Rollett, Anthony The International Journal of Advanced Manufacturing Technology, Vol. 110, Issue 1-2 https://doi.org/10.1007/s00170-020-05827-4	journal	August 2020
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting Vilaro, T.; Colin, C.; Bartout, J. D. Metallurgical and Materials Transactions A, Vol. 42, Issue 10 https://doi.org/10.1007/s11661-011-0731-y	journal	May 2011
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting Yang, Jingjing; Yu, Hanchen; Yin, Jie Materials & Design, Vol. 108 https://doi.org/10.1016/j.matdes.2016.06.117	journal	October 2016
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V Thijs, Lore; Verhaeghe, Frederik; Craeghs, Tom Acta Materialia, Vol. 58, Issue 9 https://doi.org/10.1016/j.actamat.2010.02.004	journal	May 2010
Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM) Wysocki, Bartłomiej; Maj, Piotr; Krawczyńska, Agnieszka Journal of Materials Processing Technology, Vol. 241 https://doi.org/10.1016/j.jmatprotec.2016.10.022	journal	March 2017
Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D Printing Kazantseva, N.; Krakhmalev, P.; Thuvander, M. Materials Characterization, Vol. 146 https://doi.org/10.1016/j.matchar.2018.09.042	journal	December 2018
Rapid thermokinetics driven nanoscale vanadium clustering within martensite laths in laser powder bed fused additively manufactured Ti6Al4V Pantawane, Mangesh V.; Dasari, Sriswaroop; Mantri, Srinivas Aditya Materials Research Letters, Vol. 8, Issue 10 https://doi.org/10.1080/21663831.2020.1772396	journal	June 2020
Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition Xu, W.; Brandt, M.; Sun, S. Acta Materialia, Vol. 85 https://doi.org/10.1016/j.actamat.2014.11.028	journal	February 2015
Controlling martensitic decomposition during selective laser melting to achieve best ductility in high strength Ti-6Al-4V Zafari, A.; Barati, M. R.; Xia, K. Materials Science and Engineering: A, Vol. 744 https://doi.org/10.1016/j.msea.2018.12.047	journal	January 2019
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting Kasperovich, Galina; Haubrich, Jan; Gussone, Joachim Materials & Design, Vol. 105 https://doi.org/10.1016/j.matdes.2016.05.070	journal	September 2016
Mechanism of porosity formation and influence on mechanical properties in selective laser melting of Ti-6Al-4V parts Stef, Jonathan; Poulon-Quintin, Angéline; Redjaimia, Abdelkrim Materials & Design, Vol. 156 https://doi.org/10.1016/j.matdes.2018.06.049	journal	October 2018
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing King, Wayne E.; Barth, Holly D.; Castillo, Victor M. Journal of Materials Processing Technology, Vol. 214, Issue 12 https://doi.org/10.1016/j.jmatprotec.2014.06.005	journal	December 2014
Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys: Experimental and modelling Panwisawas, Chinnapat; Perumal, Bama; Ward, R. Mark Acta Materialia, Vol. 126 https://doi.org/10.1016/j.actamat.2016.12.062	journal	March 2017
Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V Cunningham, Ross; Narra, Sneha P.; Montgomery, Colt JOM, Vol. 69, Issue 3 https://doi.org/10.1007/s11837-016-2234-1	journal	January 2017
Study of Powder Gas Entrapment and Its Effects on Porosity in 17-4 PH Stainless Steel Parts Fabricated in Laser Powder Bed Fusion Wu, Ziheng; Basu, Debomita; Meyer, John L. L. JOM, Vol. 73, Issue 1 https://doi.org/10.1007/s11837-020-04491-z	journal	December 2020
Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V Cunningham, Ross; Nicolas, Andrea; Madsen, John Materials Research Letters, Vol. 5, Issue 7 https://doi.org/10.1080/21663831.2017.1340911	journal	June 2017
Ultrafast X-ray imaging of laser–metal additive manufacturing processes Parab, Niranjan D.; Zhao, Cang; Cunningham, Ross Journal of Synchrotron Radiation, Vol. 25, Issue 5 https://doi.org/10.1107/S1600577518009554	journal	August 2018
In Situ Analysis of Laser Powder Bed Fusion Using Simultaneous High-Speed Infrared and X-ray Imaging Gould, Benjamin; Wolff, Sarah; Parab, Niranjan JOM, Vol. 73, Issue 1 https://doi.org/10.1007/s11837-020-04291-5	journal	July 2020
Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics Kouraytem, Nadia; Li, Xuxiao; Cunningham, Ross Physical Review Applied, Vol. 11, Issue 6 https://doi.org/10.1103/PhysRevApplied.11.064054	journal	June 2019
Dynamics of pore formation during laser powder bed fusion additive manufacturing Martin, Aiden A.; Calta, Nicholas P.; Khairallah, Saad A. Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-10009-2	journal	April 2019
Critical instability at moving keyhole tip generates porosity in laser melting Zhao, Cang; Parab, Niranjan D.; Li, Xuxiao Science, Vol. 370, Issue 6520 https://doi.org/10.1126/science.abd1587	journal	November 2020
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging Cunningham, Ross; Zhao, Cang; Parab, Niranjan Science, Vol. 363, Issue 6429 https://doi.org/10.1126/science.aav4687	journal	February 2019
Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding Hojjatzadeh, S. Mohammad H.; Parab, Niranjan D.; Guo, Qilin International Journal of Machine Tools and Manufacture, Vol. 153 https://doi.org/10.1016/j.ijmachtools.2020.103555	journal	June 2020
Metal Additive Manufacturing: Cost Competitive Beyond Low Volumes Laureijs, Rianne E.; Roca, Jaime Bonnín; Narra, Sneha Prabha Journal of Manufacturing Science and Engineering, Vol. 139, Issue 8 https://doi.org/10.1115/1.4035420	journal	May 2017
Review of the Methods for Production of Spherical Ti and Ti Alloy Powder Sun, Pei; Fang, Zhigang Zak; Zhang, Ying JOM, Vol. 69, Issue 10 https://doi.org/10.1007/s11837-017-2513-5	journal	August 2017
Fabrication of commercial pure Ti by selective laser melting using hydride-dehydride titanium powders treated by ball milling Xu, Wei; Xiao, Shiqi; Lu, Xin Journal of Materials Science & Technology, Vol. 35, Issue 2 https://doi.org/10.1016/j.jmst.2018.09.058	journal	February 2019
The metallurgy and processing science of metal additive manufacturing Sames, W. J.; List, F. A.; Pannala, S. International Materials Reviews, Vol. 61, Issue 5 https://doi.org/10.1080/09506608.2015.1116649	journal	March 2016
Hydrogen as a temporary alloying element in titanium alloys: thermohydrogen processing Froes, F. H.; Senkov, O. N.; Qazi, J. I. International Materials Reviews, Vol. 49, Issue 3-4 https://doi.org/10.1179/095066004225010550	journal	June 2004
Powder metallurgy CP-Ti performances: Hydride–dehydride vs. sponge Bolzoni, L.; Ruiz-Navas, E. M.; Gordo, E. Materials & Design, Vol. 60 https://doi.org/10.1016/j.matdes.2014.04.005	journal	August 2014
Optimizing hydride-dehydride Ti-6Al-4V feedstock composition for titanium powder injection moulding Thavanayagam, G.; Swan, J. E. Powder Technology, Vol. 355 https://doi.org/10.1016/j.powtec.2019.07.091	journal	October 2019
Fabrication of titanium components by low-pressure powder injection moulding using hydride-dehydride titanium powder Moghadam, Masoud Shahidi; Fayyaz, Abdolali; Ardestani, Mohammad Powder Technology, Vol. 377 https://doi.org/10.1016/j.powtec.2020.08.075	journal	January 2021
Low-cost Ti powders for additive manufacturing treated by fluidized bed Ding, Wangwang; Chen, Gang; Qin, Mingli Powder Technology, Vol. 350 https://doi.org/10.1016/j.powtec.2019.03.042	journal	May 2019
Oxidation behavior of low-cost CP-Ti powders for additive manufacturing via fluidization Ding, Wangwang; Wang, Zhangwei; Chen, Gang Corrosion Science, Vol. 178 https://doi.org/10.1016/j.corsci.2020.109080	journal	January 2021
Titanium and zirconium metal powder spheroidization by thermal plasma processes Bissett, H.; van der Walt, I. J.; Havenga, J. L. Journal of the Southern African Institute of Mining and Metallurgy https://doi.org/10.17159/2411-9717/2015/v115n10a6	journal	October 2015
The Use of HDH Titanium Alloy Powder for Additive Manufacturing Application [HDH法で製造したチタン合金粉末の3Dプリンティング用原料粉末としての可能性] Kanou, Osamu; Fukada, Nobuo; Takenaka, Shigehisa Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 64, Issue 6 https://doi.org/10.2497/jjspm.64.295	journal	January 2017
XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting Tammas-Williams, S.; Zhao, H.; Léonard, F. Materials Characterization, Vol. 102 https://doi.org/10.1016/j.matchar.2015.02.008	journal	April 2015
Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components Tammas-Williams, S.; Withers, P. J.; Todd, I. Scripta Materialia, Vol. 122 https://doi.org/10.1016/j.scriptamat.2016.05.002	journal	September 2016
Developments in synchrotron x-ray computed microtomography at the National Synchrotron Light Source Dowd, Betsy A.; Campbell, Graham H.; Marr, Robert B. SPIE's International Symposium on Optical Science, Engineering, and Instrumentation, SPIE Proceedings https://doi.org/10.1117/12.363725	conference	September 1999
Reliable method for calculating the center of rotation in parallel-beam tomography Vo, Nghia T.; Drakopoulos, Michael; Atwood, Robert C. Optics Express, Vol. 22, Issue 16 https://doi.org/10.1364/OE.22.019078	journal	January 2014
TomoPy: a framework for the analysis of synchrotron tomographic data Gürsoy, Dogˇa; De Carlo, Francesco; Xiao, Xianghui Journal of Synchrotron Radiation, Vol. 21, Issue 5 https://doi.org/10.1107/S1600577514013939	journal	August 2014
Non-destructive characterization of additively manufactured components with x-ray computed tomography for part qualification: A study with laboratory and synchrotron x-rays Cakmak, Ercan; Bingham, Philip; Cunningham, Ross W. Materials Characterization, Vol. 173 https://doi.org/10.1016/j.matchar.2021.110894	journal	March 2021
Shock Wave Interaction with Laser-Generated Single Bubbles Sankin, G. N.; Simmons, W. N.; Zhu, S. L. Physical Review Letters, Vol. 95, Issue 3 https://doi.org/10.1103/PhysRevLett.95.034501	journal	July 2005
Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing Spierings, A. B.; Voegtlin, M.; Bauer, T. Progress in Additive Manufacturing, Vol. 1, Issue 1-2 https://doi.org/10.1007/s40964-015-0001-4	journal	July 2015
Distribution of local void ratio in porous media systems from 3D X-ray microtomography images Al-Raoush, Riyadh; Alshibli, Khalid A. Physica A: Statistical Mechanics and its Applications, Vol. 361, Issue 2 https://doi.org/10.1016/j.physa.2005.05.043	journal	March 2006
High-Resolution Neutron and X-Ray Imaging of Granular Materials Kim, Felix H.; Penumadu, Dayakar; Gregor, Jens Journal of Geotechnical and Geoenvironmental Engineering, Vol. 139, Issue 5 https://doi.org/10.1061/(ASCE)GT.1943-5606.0000809	journal	May 2013
Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing Khairallah, Saad A.; Martin, Aiden A.; Lee, Jonathan R. I. Science, Vol. 368, Issue 6491 https://doi.org/10.1126/science.aay7830	journal	May 2020

Similar Records

Predictive microstructure distribution and printability maps in laser powder bed fusion for a Ni–Cu alloy

Journal Article · 2023 · Computational Materials Science · OSTI ID:2369965

Huang, Xueqin; Seede, Raiyan; Karayagiz, Kubra; +6 more

Local prediction of Laser Powder Bed Fusion porosity by short-wave infrared imaging thermal feature porosity probability maps

Journal Article · 2021 · Journal of Materials Processing Technology · OSTI ID:1862321

Lough, Cody S.; Liu, Tao; Wang, Xin; +5 more

Study of printability and porosity formation in laser powder bed fusion built hydride-dehydride (HDH

Citation Formats

References (47)

Similar Records

Related Subjects