Three-dimensional deformation dynamics of porous titanium under uniaxial compression

Chai, H.W.; Xie, Z.L.; Feng, Z.D.; Luo, S.N.; Huang, J.Y.

doi:10.1016/j.matchar.2021.111494

Three-dimensional deformation dynamics of porous titanium under uniaxial compression

Journal Article · 01 December 2021 · Mater. Charact.

DOI:https://doi.org/10.1016/j.matchar.2021.111494· OSTI ID:1829900

Chai, H.W.; Xie, Z.L.; Feng, Z.D.; Luo, S.N.; Huang, J.Y.

Research Organization:: Advanced Photon Source (APS), Argonne National Laboratory (ANL), Argonne, IL (US)

Sponsoring Organization:: DOE - Office Of Science; FOREIGN

OSTI ID:: 1829900

Journal Information:: Mater. Charact., Journal Name: Mater. Charact. Vol. 192

Country of Publication:: United States

Language:: ENGLISH

References (45)

Anisotropic spall behavior of CNT/2024Al composites under plate impact Cheng, J. C.; Chai, H. W.; Fan, G. L. Carbon, Vol. 170 https://doi.org/10.1016/j.carbon.2020.08.007	journal	December 2020
Investigation of spacer size effect on architecture and mechanical properties of porous titanium Tuncer, Nihan; Arslan, Gürsoy; Maire, Eric Materials Science and Engineering: A, Vol. 530 https://doi.org/10.1016/j.msea.2011.10.036	journal	December 2011
Fractal breakage of porous carbonate sand particles: Microstructures and mechanisms Li, H. Y.; Chai, H. W.; Xiao, X. H. Powder Technology, Vol. 363 https://doi.org/10.1016/j.powtec.2020.01.007	journal	March 2020
A new numerical modelling method for deformation behaviour of metallic porous materials using X-ray computed microtomography Doroszko, M.; Seweryn, A. Materials Science and Engineering: A, Vol. 689 https://doi.org/10.1016/j.msea.2017.02.055	journal	March 2017
Multi-scale quantitative characterization of 3-D pore-fracture networks in bituminous and anthracite coals using FIB-SEM tomography and X-ray μ-CT Li, Zhentao; Liu, Dameng; Cai, Yidong Fuel, Vol. 209 https://doi.org/10.1016/j.fuel.2017.07.088	journal	December 2017
Influence of cell aspect ratio on architecture and compressive strength of titanium foams Tuncer, Nihan; Arslan, Gürsoy; Maire, Eric Materials Science and Engineering: A, Vol. 528, Issue 24 https://doi.org/10.1016/j.msea.2011.06.028	journal	September 2011
TomoPy: a framework for the analysis of synchrotron tomographic data Gürsoy, Dogˇa; De Carlo, Francesco; Xiao, Xianghui Journal of Synchrotron Radiation, Vol. 21, Issue 5 https://doi.org/10.1107/S1600577514013939	journal	August 2014
Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting Heinl, Peter; Müller, Lenka; Körner, Carolin Acta Biomaterialia, Vol. 4, Issue 5 https://doi.org/10.1016/j.actbio.2008.03.013	journal	September 2008
Finite element analysis of porous commercially pure titanium for biomedical implant application Soro, Nicolas; Brassart, Laurence; Chen, Yunhui Materials Science and Engineering: A, Vol. 725 https://doi.org/10.1016/j.msea.2018.04.009	journal	May 2018
In situ X-ray synchrotron tomographic imaging during the compression of hyper-elastic polymeric materials Patterson, Brian M.; Cordes, Nikolaus L.; Henderson, Kevin Journal of Materials Science, Vol. 51, Issue 1 https://doi.org/10.1007/s10853-015-9355-8	journal	September 2015
Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method Li, S. J.; Xu, Q. S.; Wang, Z. Acta Biomaterialia, Vol. 10, Issue 10 https://doi.org/10.1016/j.actbio.2014.06.010	journal	October 2014
Characterization of the structure and permeability of titanium foams for spinal fusion devices Singh, R.; Lee, P.; Lindley, T. Acta Biomaterialia, Vol. 5, Issue 1 https://doi.org/10.1016/j.actbio.2008.06.014	journal	January 2009
Structural analysis of porous bioactive glass scaffolds using micro-computed tomographic images Dixit, K.; Gupta, P.; Kamle, S. Journal of Materials Science, Vol. 55, Issue 27 https://doi.org/10.1007/s10853-020-04850-w	journal	June 2020
Geometric classification of open-cell metal foams using X-ray micro-computed tomography Bock, Jessica; Jacobi, Anthony M. Materials Characterization, Vol. 75 https://doi.org/10.1016/j.matchar.2012.10.001	journal	January 2013
A numerical investigation of porous titanium as orthopedic implant material Shen, H.; Brinson, L. C. Mechanics of Materials, Vol. 43, Issue 8 https://doi.org/10.1016/j.mechmat.2011.06.002	journal	August 2011
Strain rate effects on the mechanical behavior of porous titanium with different pore sizes Zhao, J. H.; Xie, Z. L.; Zhong, T. Materials Science and Engineering: A, Vol. 821 https://doi.org/10.1016/j.msea.2021.141593	journal	July 2021
Finite element modeling of porous titanium Shen, H.; Brinson, L. C. International Journal of Solids and Structures, Vol. 44, Issue 1 https://doi.org/10.1016/j.ijsolstr.2006.04.020	journal	January 2007
Deformation and damage of sintered low-porosity aluminum under planar impact: microstructures and mechanisms Yao, Y.; Chai, H. W.; Li, C. Journal of Materials Science, Vol. 53, Issue 6 https://doi.org/10.1007/s10853-017-1869-9	journal	December 2017
Investigation on ultrasonic vibration effects on plastic flow behavior of pure titanium: Constitutive modeling Lin, Jun; Li, Jiao; Liu, Tao Journal of Materials Research and Technology, Vol. 9, Issue 3 https://doi.org/10.1016/j.jmrt.2020.03.017	journal	May 2020
Comparison of aluminium foams prepared by different methods using X-ray tomography Wang, Ningzhen; Maire, Eric; Cheng, Ying Materials Characterization, Vol. 138 https://doi.org/10.1016/j.matchar.2018.02.015	journal	April 2018
Anisotropic mechanical properties of porous copper fabricated by unidirectional solidification Hyun, S. K.; Murakami, K.; Nakajima, H. Materials Science and Engineering: A, Vol. 299, Issue 1-2 https://doi.org/10.1016/S0921-5093(00)01402-7	journal	February 2001
Geometrical and topological evolution of a closed-cell aluminium foam subject to drop-weight impact: An X-ray tomography study Kader, M. A.; Brown, A. D.; Hazell, P. J. International Journal of Impact Engineering, Vol. 139 https://doi.org/10.1016/j.ijimpeng.2020.103510	journal	May 2020
Effect of pore structure on the compressive property of porous Ti produced by powder metallurgy technique Li, B. Q.; Wang, C. Y.; Lu, X. Materials & Design, Vol. 50 https://doi.org/10.1016/j.matdes.2013.02.082	journal	September 2013
Three-dimensional real structure-based finite element analysis of mechanical behavior for porous titanium manufactured by a space holder method Lee, Dong Jun; Jung, Jai Myun; Latypov, Marat I. Computational Materials Science, Vol. 100 https://doi.org/10.1016/j.commatsci.2014.10.020	journal	April 2015
Microstructural characterization and constitutive modeling of deformation of closed-cell foams based on in situ x-ray tomography Chai, H. W.; Xie, Z. L.; Xiao, X. H. International Journal of Plasticity, Vol. 131 https://doi.org/10.1016/j.ijplas.2020.102730	journal	August 2020
Mechanical properties of directionally freeze-cast titanium foams Li, Jessica C.; Dunand, David C. Acta Materialia, Vol. 59, Issue 1 https://doi.org/10.1016/j.actamat.2010.09.019	journal	January 2011
Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomography Atwood, R. C.; Jones, J. R.; Lee, P. D. Scripta Materialia, Vol. 51, Issue 11 https://doi.org/10.1016/j.scriptamat.2004.08.014	journal	November 2004
Numerical modeling of the tensile deformation process of sintered 316L based on microtomography of porous mesostructures Doroszko, M.; Seweryn, A. Materials & Design, Vol. 88 https://doi.org/10.1016/j.matdes.2015.09.006	journal	December 2015
Deformation rate effects on failure modes of open-cell Al foams and textile cellular materials Lee, Sungsoo; Barthelat, François; Moldovan, Nicolaie International Journal of Solids and Structures, Vol. 43, Issue 1 https://doi.org/10.1016/j.ijsolstr.2005.06.101	journal	January 2006
Investigation of strain-rate effect on the compressive behaviour of closed-cell aluminium foam by 3D image-based modelling Sun, Yongle; Li, Q. M.; Lowe, T. Materials & Design, Vol. 89 https://doi.org/10.1016/j.matdes.2015.09.109	journal	January 2016
Structure and deformation correlation of closed-cell aluminium foam subject to uniaxial compression Saadatfar, M.; Mukherjee, M.; Madadi, M. Acta Materialia, Vol. 60, Issue 8 https://doi.org/10.1016/j.actamat.2012.02.029	journal	May 2012
The effect of spatial micro-CT image resolution and surface complexity on the morphological 3D analysis of open porous structures Pyka, Grzegorz; Kerckhofs, Greet; Schrooten, Jan Materials Characterization, Vol. 87 https://doi.org/10.1016/j.matchar.2013.11.004	journal	January 2014
Characterization and modeling of localized compaction in aluminum foam Issen, K.; Casey, T.; Dixon, D. Scripta Materialia, Vol. 52, Issue 9 https://doi.org/10.1016/j.scriptamat.2004.12.031	journal	May 2005
Characterization of the porous structures of the green body and sintered biomedical titanium scaffolds with micro-computed tomography Arifvianto, B.; Leeflang, M. A.; Zhou, J. Materials Characterization, Vol. 121 https://doi.org/10.1016/j.matchar.2016.09.026	journal	November 2016
Image-based correlation between the meso-scale structure and deformation of closed-cell foam Sun, Yongle; Zhang, Xun; Shao, Zhushan Materials Science and Engineering: A, Vol. 688 https://doi.org/10.1016/j.msea.2017.01.092	journal	March 2017
Deformation mechanisms of spherical cell porous aluminum under quasi-static compression Fan, Zhiqiang; Zhang, Bingbing; Gao, Yubo Scripta Materialia, Vol. 142 https://doi.org/10.1016/j.scriptamat.2017.08.019	journal	January 2018
Pore-scale numerical modelling of large deformation behaviour of sintered porous metals under compression using computed microtomography Doroszko, M.; Seweryn, A. Mechanics of Materials, Vol. 141 https://doi.org/10.1016/j.mechmat.2019.103259	journal	January 2020
Microstructural and mechanical characterization of variability in porous advanced ceramics using X-ray computed tomography and digital image correlation Lo, Calvin; Sano, Tomoko; Hogan, James D. Materials Characterization, Vol. 158 https://doi.org/10.1016/j.matchar.2019.109929	journal	December 2019
On-line construction of the convex hull of a simple polyline Melkman, Avraham A. Information Processing Letters, Vol. 25, Issue 1 https://doi.org/10.1016/0020-0190(87)90086-X	journal	April 1987
Individual pore and interconnection size analysis of macroporous ceramic scaffolds using high-resolution X-ray tomography Jerban, Saeed; Elkoun, Saïd Materials Characterization, Vol. 118 https://doi.org/10.1016/j.matchar.2016.06.030	journal	August 2016
Microstructure and fracture properties of open-cell porous Ti-6Al-4V with high porosity fabricated by electron beam melting Chen, S. Y.; Kuo, C. N.; Su, Y. L. Materials Characterization, Vol. 138 https://doi.org/10.1016/j.matchar.2018.02.016	journal	April 2018
Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling Singh, R.; Lee, P. D.; Lindley, T. C. Acta Biomaterialia, Vol. 6, Issue 6 https://doi.org/10.1016/j.actbio.2009.11.032	journal	June 2010
Osteoinduction of porous bioactive titanium metal Fujibayashi, Shunsuke; Neo, Masashi; Kim, Hyun-Min Biomaterials, Vol. 25, Issue 3 https://doi.org/10.1016/S0142-9612(03)00551-9	journal	February 2004
Detailed physics, predictive capabilities and macroscopic consequences for pore-network models of multiphase flow Blunt, Martin J.; Jackson, Matthew D.; Piri, Mohammad Advances in Water Resources, Vol. 25, Issue 8-12 https://doi.org/10.1016/S0309-1708(02)00049-0	journal	August 2002
Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds Jones, Julian R.; Poologasundarampillai, Gowsihan; Atwood, Robert C. Biomaterials, Vol. 28, Issue 7 https://doi.org/10.1016/j.biomaterials.2006.11.014	journal	March 2007

Similar Records

Three-dimensional deformation dynamics of porous titanium under uniaxial compression

Journal Article · 2021 · Mater. Charact. · OSTI ID:1828057

Three-dimensional deformation dynamics of porous titanium under uniaxial compression

Journal Article · 2021 · Materials Characterization · OSTI ID:1868600

Plastic deformation of hafnium under uniaxial compression

Journal Article · 1997 · Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science · OSTI ID:522361

Three-dimensional deformation dynamics of porous titanium under uniaxial compression

Citation Formats

References (45)

Similar Records

Related Subjects