Achieving a combination of decent biocompatibility and large near-linear-elastic deformation behavio

Guo, Shun; Wu, Tinghui; Kwak, Minkyung; Lu, Weiqun; Ma, Wen; Liu, Qing; Liu, Haixia; Meng, Qingkun; Liu, Guanglei; Cheng, Xiaonong; Zhao, Xinqing

doi:10.1016/j.jmbbm.2021.104789

Achieving a combination of decent biocompatibility and large near-linear-elastic deformation behavio

Journal Article · 01 November 2021 · J. Mech. Behav. Biomed.

DOI:https://doi.org/10.1016/j.jmbbm.2021.104789· OSTI ID:1821725

Guo, Shun; Wu, Tinghui; Kwak, Minkyung; Lu, Weiqun; Ma, Wen; Liu, Qing; Liu, Haixia; Meng, Qingkun; Liu, Guanglei; Cheng, Xiaonong; Zhao, Xinqing

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)

Sponsoring Organization:: DOE - Office Of Science; FOREIGN

OSTI ID:: 1821725

Journal Information:: J. Mech. Behav. Biomed., Vol. 123

Country of Publication:: United States

Language:: ENGLISH

References (40)

Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti–23 at% Nb shape-memory alloys Bahador, Abdollah; Hamzah, Esah; Kondoh, Katsuyoshi Materials & Design, Vol. 118 https://doi.org/10.1016/j.matdes.2016.12.048	journal	March 2017
In situ synchrotron X-ray diffraction study of the martensitic transformation in superelastic Ti-24Nb-0.5N and Ti-24Nb-0.5O alloys Castany, P.; Ramarolahy, A.; Prima, F. Acta Materialia, Vol. 88 https://doi.org/10.1016/j.actamat.2015.01.014	journal	April 2015
Co content effect on elastic strain limit in ZrCuNiAlCo bulk metallic glasses Dong, Y.; Wunderlich, R.; Biskupek, J. Scripta Materialia, Vol. 137 https://doi.org/10.1016/j.scriptamat.2017.05.007	journal	August 2017
Influence of Ni/Ti ratio and Nb addition on martensite transformation behavior of NiTiNb alloys Fan, Q. C.; Zhang, Y.; Zhang, Y. H. Journal of Alloys and Compounds, Vol. 790 https://doi.org/10.1016/j.jallcom.2019.02.330	journal	June 2019
In-situ synchrotron high energy X-ray diffraction study of micro-mechanical behaviour of R phase reorientation in nanocrystalline NiTi alloy Feng, Bo; Kong, Xiangguang; Hao, Shijie Acta Materialia, Vol. 194 https://doi.org/10.1016/j.actamat.2020.05.004	journal	August 2020
Influence of Ni on martensitic phase transformations in NiTi shape memory alloys Frenzel, J.; George, E. P.; Dlouhy, A. Acta Materialia, Vol. 58, Issue 9 https://doi.org/10.1016/j.actamat.2010.02.019	journal	May 2010
In situ mechanical behavior of mineral crystals in human cortical bone under compressive load using synchrotron X-ray scattering techniques Giri, Bijay; Almer, Jonathan D.; Dong, X. Neil Journal of the Mechanical Behavior of Biomedical Materials, Vol. 14 https://doi.org/10.1016/j.jmbbm.2012.05.003	journal	October 2012
Suppression of isothermal ω phase by dislocation tangles and grain boundaries in metastable β-type titanium alloys Guo, Shun; Meng, Qingkun; Hu, Liang Journal of Alloys and Compounds, Vol. 550 https://doi.org/10.1016/j.jallcom.2012.09.081	journal	February 2013
Design and fabrication of a (β+α") dual-phase Ti-Nb-Sn alloy with linear deformation behavior for biomedical applications Guo, Shun; Shi, Yulu; Liu, Guanglei Journal of Alloys and Compounds, Vol. 805 https://doi.org/10.1016/j.jallcom.2019.07.109	journal	October 2019
In situ synchrotron X-ray diffraction analysis of deformation behavior of a Nb/NiTi composite for biomedical applications Guo, Shun; Wu, Rui-Tang; Shi, Yu-Lu Rare Metals, Vol. 40, Issue 3 https://doi.org/10.1007/s12598-020-01613-z	journal	October 2020
A sandwich-structured Nb/NiTi composite with good bio-compatibility, near-linear-elastic deformation and large elastic admissible strain Guo, Shun; Zhang, Huihui; Chen, Yueliang Composites Part B: Engineering, Vol. 207 https://doi.org/10.1016/j.compositesb.2020.108586	journal	February 2021
A Transforming Metal Nanocomposite with Large Elastic Strain, Low Modulus, and High Strength Hao, Shijie; Cui, Lishan; Jiang, Daqiang Science, Vol. 339, Issue 6124, p. 1191-1194 https://doi.org/10.1126/science.1228602	journal	March 2013
Continuous and reversible atomic rearrangement in a multifunctional titanium alloy Hao, Y. L.; Gong, D. L.; Li, T. Materialia, Vol. 2 https://doi.org/10.1016/j.mtla.2018.08.013	journal	October 2018
High dislocation density–induced large ductility in deformed and partitioned steels He, B. B.; Hu, B.; Yen, H. W. Science, Vol. 357, Issue 6355 https://doi.org/10.1126/science.aan0177	journal	August 2017
Intermetallic formation and mechanical properties of Ni-Ti diffusion couples Hu, Lifang; Xue, Yongzhi; Shi, Fangrong Materials & Design, Vol. 130 https://doi.org/10.1016/j.matdes.2017.05.055	journal	September 2017
In vitro study of human endothelial progenitor cells behaviour on nitrided Ni-free Ti–27Nb alloy Ion, Raluca; Bédouin, Yvan; Gloriant, Thierry Progress in Natural Science: Materials International, Vol. 29, Issue 4 https://doi.org/10.1016/j.pnsc.2019.08.001	journal	August 2019
Mechanical properties of Ti–Ni shape memory thin films formed by sputtering Ishida, A.; Sato, M.; Miyazaki, S. Materials Science and Engineering: A, Vol. 273-275 https://doi.org/10.1016/S0921-5093(99)00410-4	journal	December 1999
Processing and properties of bulk ultrafine-grained pure niobium Kommel, Lembit; Kimmari, Eduard; Saarna, Mart Journal of Materials Science, Vol. 48, Issue 13 https://doi.org/10.1007/s10853-013-7210-3	journal	February 2013
Preparation of Ti–Nb–Ta–Zr alloys for load-bearing biomedical applications Li, Bo-Qiong; Li, Chun-Lin; Wang, Zhen-Xia Rare Metals, Vol. 38, Issue 6 https://doi.org/10.1007/s12598-019-01239-w	journal	May 2019
Lüders-like deformation associated with martensite reorientation in NiTi Liu, Yinong; Liu, Yong; Humbeeck, JanVan Scripta Materialia, Vol. 39, Issue 8 https://doi.org/10.1016/S1359-6462(98)00241-3	journal	September 1998
Effect of dislocations and residual stresses on the martensitic transformation of Cu-Al-Ni-Mn shape memory alloy powders Mazzer, E. M.; Gargarella, P.; Cava, R. D. Journal of Alloys and Compounds, Vol. 723 https://doi.org/10.1016/j.jallcom.2017.06.312	journal	November 2017
Synchrotron X-ray diffraction characterization of phase transformations during thermomechanical processing of a Ti38Nb alloy Meng, Qing-Kun; Li, Huan; Zhao, Chong-Hang Rare Metals, Vol. 40, Issue 11 https://doi.org/10.1007/s12598-021-01763-8	journal	May 2021
A review of shape memory alloy research, applications and opportunities Mohd Jani, Jaronie; Leary, Martin; Subic, Aleksandar Materials & Design (1980-2015), Vol. 56 https://doi.org/10.1016/j.matdes.2013.11.084	journal	April 2014
Flow stress of commercially pure niobium over a broad range of temperatures and strain rates Nemat-Nasser, Sia; Guo, Weiguo Materials Science and Engineering: A, Vol. 284, Issue 1-2 https://doi.org/10.1016/S0921-5093(00)00740-1	journal	May 2000
Design and thermo-mechanical analysis of a new NiTi shape memory alloy fixing clip Nespoli, Adelaide; Dallolio, Villiam; Stortiero, Francesco Materials Science and Engineering: C, Vol. 37 https://doi.org/10.1016/j.msec.2014.01.001	journal	April 2014
Physical metallurgy of Ti–Ni-based shape memory alloys Otsuka, K.; Ren, X. Progress in Materials Science, Vol. 50, Issue 5 https://doi.org/10.1016/j.pmatsci.2004.10.001	journal	July 2005
Microstructure and elastic deformation behavior of β-type Ti-29Nb-13Ta-4.6Zr with promising mechanical properties for stent applications Plaine, Athos H.; Silva, Murillo R. da; Bolfarini, Claudemiro Journal of Materials Research and Technology, Vol. 8, Issue 5 https://doi.org/10.1016/j.jmrt.2019.06.047	journal	September 2019
Thermo-mechanical characterization of NiTi orthodontic archwires with graded actuating forces Rodrigues, P. Freitas; Fernandes, F. M. Braz; Magalhães, R. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 107 https://doi.org/10.1016/j.jmbbm.2020.103747	journal	July 2020
Grain-resolved analysis of localized deformation in nickel-titanium wire under tensile load Sedmák, P.; Pilch, J.; Heller, L. Science, Vol. 353, Issue 6299 https://doi.org/10.1126/science.aad6700	journal	August 2016
On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys Ševčíková, Jana; Bártková, Denisa; Goldbergová, Monika Applied Surface Science, Vol. 427 https://doi.org/10.1016/j.apsusc.2017.08.235	journal	January 2018
Approaching the ideal elastic limit of metallic glasses Tian, Lin; Cheng, Yong-Qiang; Shan, Zhi-Wei Nature Communications, Vol. 3, Issue 1 https://doi.org/10.1038/ncomms1619	journal	January 2012
Comparative study on crystallographic orientation, precipitation, phase transformation and mechanical response of Ni-rich NiTi alloy fabricated by WAAM at elevated substrate heating temperatures Wang, Jun; Pan, Zengxi; Carpenter, Kristin Materials Science and Engineering: A, Vol. 800 https://doi.org/10.1016/j.msea.2020.140307	journal	January 2021
Phase transformation behavior of pseudoelastic NiTi shape memory alloys under large strain Wang, Xinmei; Xu, Baoxing; Yue, Zhufeng Journal of Alloys and Compounds, Vol. 463, Issue 1-2 https://doi.org/10.1016/j.jallcom.2007.09.029	journal	September 2008
New materials for micro-scale sensors and actuators Wilson, Stephen A.; Jourdain, Renaud P. J.; Zhang, Qi Materials Science and Engineering: R: Reports, Vol. 56, Issue 1-6 https://doi.org/10.1016/j.mser.2007.03.001	journal	June 2007
Bulk metallic glass composite with good tensile ductility, high strength and large elastic strain limit Wu, Fu-Fa; Chan, K. C.; Jiang, Song-Shan Scientific Reports, Vol. 4, Issue 1 https://doi.org/10.1038/srep05302	journal	June 2014
Leaf-like dislocation substructures and the decrease of martensitic start temperatures: A new explanation for functional fatigue during thermally induced martensitic transformations in coarse-grained Ni-rich Ti–Ni shape memory alloys Zhang, Jian; Somsen, Christoph; Simon, Tobias Acta Materialia, Vol. 60, Issue 5 https://doi.org/10.1016/j.actamat.2011.12.014	journal	March 2012
Dual Phase Synergy Enabled Large Elastic Strains of Nanoinclusions in a Dislocation Slip Matrix Composite Zhang, Junsong; Hao, Shijie; Jiang, Daqiang Nano Letters, Vol. 18, Issue 5 https://doi.org/10.1021/acs.nanolett.8b00427	journal	April 2018
The microstructure and linear superelasticity of cold-drawn TiNi alloy Zheng, Y. F.; Huang, B. M.; Zhang, J. X. Materials Science and Engineering: A, Vol. 279, Issue 1-2 https://doi.org/10.1016/S0921-5093(99)00632-2	journal	February 2000
HREM studies of twin boundary structure in deformed martensite in the cold-rolled TiNi shape memory alloy Zheng, Y. F.; Zhao, L. C.; Ye, H. Q. Materials Science and Engineering: A, Vol. 297, Issue 1-2 https://doi.org/10.1016/S0921-5093(00)01222-3	journal	January 2001
Effects of stress relief tempering on microstructure and tensile/impact behavior of quenched and partitioned commercial spring steel Zurnadzhy, V. I.; Efremenko, V. G.; Wu, K. M. Materials Science and Engineering: A, Vol. 745 https://doi.org/10.1016/j.msea.2018.12.106	journal	February 2019

Similar Records

Achieving a combination of decent biocompatibility and large near-linear-elastic deformation behavio

Journal Article · 2021 · J. Mech. Behav. Biomed. · OSTI ID:1823153

Guo, Shun; Wu, Tinghui; Kwak, Minkyung; +8 more

A sandwich-structured Nb/NiTi composite with good bio-compatibility, near-linear-elastic deformation and large elastic admissible strain

Journal Article · 2021 · Compos. Part B-Eng. · OSTI ID:1759051

Guo, Shun; Zhang, Huihui; Chen, Yueliang; +8 more

Achieving large linear elasticity and high strength in bulk nanocompsite via synergistic effect

Journal Article · 2015 · Scientific Reports · OSTI ID:1239626

Hao, Shijie; Cui, Lishan; Guo, Fangmin; +5 more

Achieving a combination of decent biocompatibility and large near-linear-elastic deformation behavio

Citation Formats

References (40)

Similar Records

Related Subjects