Onset of periodic oscillations as a precursor of a transition to pore-generating turbulence in laser

Khairallah, Saad A.; Sun, Tao; Simonds, Brian J.

doi:10.1016/j.addlet.2021.100002

Onset of periodic oscillations as a precursor of a transition to pore-generating turbulence in laser

Journal Article · 01 December 2021 · Additive Manu.

DOI:https://doi.org/10.1016/j.addlet.2021.100002· OSTI ID:1820459

Khairallah, Saad A.; Sun, Tao; Simonds, Brian J.

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)

Sponsoring Organization:: DOE - Office Of Science; DOE - BASIC ENERGY SCIENCES

OSTI ID:: 1820459

Journal Information:: Additive Manu., Vol. 1

Country of Publication:: United States

Language:: ENGLISH

References (25)

TURBULENCE IN ASTROPHYSICS: Stars Canuto, V. M.; Christensen-Dalsgaard, J. Annual Review of Fluid Mechanics, Vol. 30, Issue 1 https://doi.org/10.1146/annurev.fluid.30.1.167	journal	January 1998
Introduction to quantum turbulence Barenghi, C. F.; Skrbek, L.; Sreenivasan, K. R. Proceedings of the National Academy of Sciences, Vol. 111, Issue Supplement_1 https://doi.org/10.1073/pnas.1400033111	journal	March 2014
Sudden Viscous Dissipation of Compressing Turbulence Davidovits, Seth; Fisch, Nathaniel J. Physical Review Letters, Vol. 116, Issue 10 https://doi.org/10.1103/PhysRevLett.116.105004	journal	March 2016
Grand challenges in the science of wind energy Veers, Paul; Dykes, Katherine; Lantz, Eric Science, Vol. 366, Issue 6464 https://doi.org/10.1126/science.aau2027	journal	October 2019
Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing Khairallah, Saad A.; Martin, Aiden A.; Lee, Jonathan R. I. Science, Vol. 368, Issue 6491 https://doi.org/10.1126/science.aay7830	journal	May 2020
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging Cunningham, Ross; Zhao, Cang; Parab, Niranjan Science, Vol. 363, Issue 6429 https://doi.org/10.1126/science.aav4687	journal	February 2019
Critical instability at moving keyhole tip generates porosity in laser melting Zhao, Cang; Parab, Niranjan D.; Li, Xuxiao Science, Vol. 370, Issue 6520 https://doi.org/10.1126/science.abd1587	journal	November 2020
Additive manufacturing of metallic components – Process, structure and properties DebRoy, T.; Wei, H. L.; Zuback, J. S. Progress in Materials Science, Vol. 92 https://doi.org/10.1016/j.pmatsci.2017.10.001	journal	March 2018
Denudation of metal powder layers in laser powder bed fusion processes Matthews, Manyalibo J.; Guss, Gabe; Khairallah, Saad A. Acta Materialia, Vol. 114 https://doi.org/10.1016/j.actamat.2016.05.017	journal	August 2016
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction Zhao, Cang; Fezzaa, Kamel; Cunningham, Ross W. Scientific Reports, Vol. 7, Issue 1 https://doi.org/10.1038/s41598-017-03761-2	journal	June 2017
Fluid and particle dynamics in laser powder bed fusion Bidare, P.; Bitharas, I.; Ward, R. M. Acta Materialia, Vol. 142 https://doi.org/10.1016/j.actamat.2017.09.051	journal	January 2018
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing Leung, Chu Lun Alex; Marussi, Sebastian; Atwood, Robert C. Nature Communications, Vol. 9, Issue 1 https://doi.org/10.1038/s41467-018-03734-7	journal	April 2018
Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing Ye, Jianchao; Khairallah, Saad A.; Rubenchik, Alexander M. Advanced Engineering Materials, Vol. 21, Issue 7 https://doi.org/10.1002/adem.201900185	journal	April 2019
In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing Trapp, Johannes; Rubenchik, Alexander M.; Guss, Gabe Applied Materials Today, Vol. 9 https://doi.org/10.1016/j.apmt.2017.08.006	journal	December 2017
Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal Simonds, Brian J.; Sowards, Jeffrey; Hadler, Josh Physical Review Applied, Vol. 10, Issue 4 https://doi.org/10.1103/PhysRevApplied.10.044061	journal	October 2018
Dynamic Laser Absorptance Measured in a Geometrically Characterized Stainless-Steel Powder Layer Simonds, Brian J.; Garboczi, Edward J.; Palmer, Todd A. Physical Review Applied, Vol. 13, Issue 2 https://doi.org/10.1103/PhysRevApplied.13.024057	journal	February 2020
Mesoscopic simulation model of selective laser melting of stainless steel powder Khairallah, Saad A.; Anderson, Andy Journal of Materials Processing Technology, Vol. 214, Issue 11 https://doi.org/10.1016/j.jmatprotec.2014.06.001	journal	November 2014
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Khairallah, Saad A.; Anderson, Andrew T.; Rubenchik, Alexander Acta Materialia, Vol. 108 https://doi.org/10.1016/j.actamat.2016.02.014	journal	April 2016
Laser ray tracing and power deposition on an unstructured three-dimensional grid Kaiser, Thomas B. Physical Review E, Vol. 61, Issue 1 https://doi.org/10.1103/PhysRevE.61.895	journal	January 2000
Energy-Coupling Mechanisms Revealed through Simultaneous Keyhole Depth and Absorptance Measurements during Laser-Metal Processing Allen, Troy R.; Huang, Wenkang; Tanner, Jack R. Physical Review Applied, Vol. 13, Issue 6 https://doi.org/10.1103/PhysRevApplied.13.064070	journal	June 2020
Simultaneous in operando monitoring of keyhole depth and absorptance in laser processing of AISI 316 stainless steel at 200 kHz Allen, Troy R.; Simonds, Brian J.; Tanner, Jack R. Procedia CIRP, Vol. 94 https://doi.org/10.1016/j.procir.2020.09.157	journal	January 2020
Heat and fluid flow in additive manufacturing – Part II: Powder bed fusion of stainless steel, and titanium, nickel and aluminum base alloys Mukherjee, T.; Wei, H. L.; De, A. Computational Materials Science, Vol. 150 https://doi.org/10.1016/j.commatsci.2018.04.027	journal	July 2018
Surface tension and viscosity of industrial alloys from parabolic flight experiments — Results of theThermoLab project Aune, Ragnhild; Battezzati, Livio; Brooks, Rob Microgravity - Science and Technology, Vol. 16, Issue 1-4 https://doi.org/10.1007/BF02945937	journal	March 2005
Ultrafast X-ray imaging of laser–metal additive manufacturing processes Parab, Niranjan D.; Zhao, Cang; Cunningham, Ross Journal of Synchrotron Radiation, Vol. 25, Issue 5 https://doi.org/10.1107/S1600577518009554	journal	August 2018
Dynamics of pore formation during laser powder bed fusion additive manufacturing Martin, Aiden A.; Calta, Nicholas P.; Khairallah, Saad A. Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-10009-2	journal	April 2019

Similar Records

Onset of periodic oscillations as a precursor of a transition to pore-generating turbulence in laser

Journal Article · 2021 · Additive Manu. · OSTI ID:1819319

Khairallah, Saad A.; Sun, Tao; Simonds, Brian J.

Onset of periodic oscillations as a precursor of a transition to pore-generating turbulence in laser melting

Journal Article · 2021 · Additive Manufacturing Letters · OSTI ID:1808930

Khairallah, Saad A.; Sun, Tao; Simonds, Brian J.

Onset of periodic oscillations as a precursor of a transition to pore-generating turbulence in laser

Citation Formats

References (25)

Similar Records

Related Subjects