Evaluation of Fracture Toughness of Sandstone and Shale Using Digital Image Correlation

Kramarov, Vladyslav; Parrikar, Prathmesh Naik; Mokhtari, Mehdi

doi:10.1007/s00603-020-02171-7

Evaluation of Fracture Toughness of Sandstone and Shale Using Digital Image Correlation

Journal Article · 17 June 2020 · Rock Mechanics and Rock Engineering

DOI:https://doi.org/10.1007/s00603-020-02171-7· OSTI ID:1799933

Kramarov, Vladyslav ^[1]; ; Mokhtari, Mehdi

OSTI

Not provided.

Research Organization:: Univ. of Louisiana, Lafayette, LA (United States)

Sponsoring Organization:: USDOE Office of Fossil Energy (FE)

DOE Contract Number:: FE0031575

OSTI ID:: 1799933

Journal Information:: Rock Mechanics and Rock Engineering, Journal Name: Rock Mechanics and Rock Engineering Journal Issue: 9 Vol. 53; ISSN 0723-2632

Publisher:: Springer

Country of Publication:: United States

Language:: English

References (41)

Size and Geometry Effects on Rock Fracture Toughness: Mode I Fracture Ayatollahi, M. R.; Akbardoost, J. Rock Mechanics and Rock Engineering, Vol. 47, Issue 2 https://doi.org/10.1007/s00603-013-0430-7	journal	May 2013
Use of S-wave anisotropy to quantify the onset of stress-induced microfracturing Ramos, Matthew J.; Nicolas Espinoza, D.; Torres-Verdín, Carlos GEOPHYSICS, Vol. 82, Issue 6 https://doi.org/10.1190/geo2016-0579.1	journal	November 2017
Measurement of mixed-mode stress intensity factors using digital image correlation method Zhang, Rui; He, Lingfeng Optics and Lasers in Engineering, Vol. 50, Issue 7 https://doi.org/10.1016/j.optlaseng.2012.01.009	journal	July 2012
Evaluation of crack-tip fields from DIC data: A parametric study Mokhtarishirazabad, M.; Lopez-Crespo, P.; Moreno, B. International Journal of Fatigue, Vol. 89 https://doi.org/10.1016/j.ijfatigue.2016.03.006	journal	August 2016
Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curves Bažant, Z. P.; Gettu, R.; Kazemi, M. T. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 28, Issue 1 https://doi.org/10.1016/0148-9062(91)93232-U	journal	January 1991
A methodology to determine the elastic properties of anisotropic rocks from a single uniaxial compression test Nejati, Morteza; Dambly, Marie Luise Texas; Saar, Martin O. Journal of Rock Mechanics and Geotechnical Engineering, Vol. 11, Issue 6 https://doi.org/10.1016/j.jrmge.2019.04.004	journal	December 2019
Size effects in mode II brittle fracture of rocks Ayatollahi, M. R.; Akbardoost, J. Engineering Fracture Mechanics, Vol. 112-113 https://doi.org/10.1016/j.engfracmech.2013.10.011	journal	November 2013
Evidence of Strong Fracture Height Containment Based on Complex Shear Failure and Formation Anisotropy Barree, R. D.; Conway, M. W.; Gilbert, J. V. SPE Annual Technical Conference and Exhibition, All Days https://doi.org/10.2118/134142-MS	conference	September 2010
Microstructural controls on elastic anisotropy of finely laminated Mancos Shale Ramos, Matthew J.; Espinoza, D. Nicolas; Goldfarb, Eric J. Geophysical Journal International, Vol. 216, Issue 2 https://doi.org/10.1093/gji/ggy474	journal	November 2018
Experimental Study of Mode-I Fracture Toughness for Layered Shale Based on Two ISRM-Suggested Methods Wang, Hongjian; Zhao, Fei; Huang, Zhiquan Rock Mechanics and Rock Engineering, Vol. 50, Issue 7 https://doi.org/10.1007/s00603-017-1180-8	journal	February 2017
New specimen for fracture toughness determination for rock and other materials Chong, K. P.; Kuruppu, M. D. International Journal of Fracture, Vol. 26, Issue 2 https://doi.org/10.1007/BF01157555	journal	October 1984
Damage and Fracture Investigation of Three-Point Bending Notched Sandstone Beams by DIC and AE Techniques Zhang, Hao; Fu, Donghui; Song, Haipeng Rock Mechanics and Rock Engineering, Vol. 48, Issue 3 https://doi.org/10.1007/s00603-014-0635-4	journal	August 2014
Fracture testing of a soft rock with semi-circular specimens under three-point bending. Part 1—mode I Lim, I. L.; Johnston, I. W.; Choi, S. K. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 31, Issue 3 https://doi.org/10.1016/0148-9062(94)90463-4	journal	June 1994
Suggested method for determining mode I fracture toughness using Cracked Chevron Notched Brazilian Disc (CCNBD) specimens Fowell, R. J. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 32, Issue 1 https://doi.org/10.1016/0148-9062(94)00015-U	journal	January 1995
Typical Upper Bound–Lower Bound Mixed Mode Fracture Resistance Envelopes for Rock Material Aliha, M. R. M.; Ayatollahi, M. R.; Akbardoost, J. Rock Mechanics and Rock Engineering, Vol. 45, Issue 1 https://doi.org/10.1007/s00603-011-0167-0	journal	July 2011
Size effects on fracture toughness of quasi-brittle materials – A new approach Ayatollahi, M. R.; Akbardoost, J. Engineering Fracture Mechanics, Vol. 92 https://doi.org/10.1016/j.engfracmech.2012.06.005	journal	September 2012
ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen Kuruppu, M. D.; Obara, Y.; Ayatollahi, M. R. Rock Mechanics and Rock Engineering, Vol. 47, Issue 1 https://doi.org/10.1007/s00603-013-0422-7	journal	April 2013
Crack Propagation and Fracture Process Zone (FPZ) of Wood in the Longitudinal Direction Determined Using Digital Image Correlation (DIC) Technique Yu, Ying; Zeng, Weihang; Liu, Wen Remote Sensing, Vol. 11, Issue 13 https://doi.org/10.3390/rs11131562	journal	July 2019
Comparing Reservoir and Outcrop Specimens for Mixed Mode I-II Fracture Toughness of a Limestone Rock Formation at Various Conditions Al-Shayea, N. Rock Mechanics and Rock Engineering, Vol. 35, Issue 4 https://doi.org/10.1007/s00603-002-0027-z	journal	October 2002
Evaluating mixed-mode stress intensity factors from full-field displacement fields obtained by optical methods Yoneyama, S.; Ogawa, T.; Kobayashi, Y. Engineering Fracture Mechanics, Vol. 74, Issue 9 https://doi.org/10.1016/j.engfracmech.2006.08.004	journal	June 2007
Optical visualization of strain development and fracture propagation in laminated rocks Nath, Fatick; Mokhtari, Mehdi Journal of Petroleum Science and Engineering, Vol. 167 https://doi.org/10.1016/j.petrol.2018.04.020	journal	August 2018
Stress intensity factors for semi-circular specimens under three-point bending Lim, I. L.; Johnston, I. W.; Choi, S. K. Engineering Fracture Mechanics, Vol. 44, Issue 3 https://doi.org/10.1016/0013-7944(93)90030-V	journal	February 1993
A general method for determining mixed-mode stress intensity factors from isochromatic fringe patterns Sanford, Robert J.; Dally, James W. Engineering Fracture Mechanics, Vol. 11, Issue 4 https://doi.org/10.1016/0013-7944(79)90123-1	journal	January 1979
Estimation of stress intensity factor by digital image correlation McNeill, S. R.; Peters, W. H.; Sutton, M. A. Engineering Fracture Mechanics, Vol. 28, Issue 1 https://doi.org/10.1016/0013-7944(87)90124-X	journal	January 1987
Fracture toughness testing of brittle materials using semi-circular bend (SCB) specimen Kuruppu, Mahinda D.; Chong, Ken P. Engineering Fracture Mechanics, Vol. 91 https://doi.org/10.1016/j.engfracmech.2012.01.013	journal	September 2012
Mode I fracture toughness determination with straight notched disk bending method Tutluoglu, Levent; Keles, Cigdem International Journal of Rock Mechanics and Mining Sciences, Vol. 48, Issue 8 https://doi.org/10.1016/j.ijrmms.2011.09.019	journal	December 2011
Fracture toughness and hydraulic fracturing Thiercelin, M. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 26, Issue 3-4 https://doi.org/10.1016/0148-9062(89)91967-0	journal	July 1989
Fracture Mechanics Anderson, Ted L.; Anderson, T. L. CRC Press https://doi.org/10.1201/9781420058215	book	June 2005
Fracture testing of a soft rock with semi-circular specimens under three-point bending. Part 2—mixed-mode Lim, I. L.; Johnston, I. W.; Choi, S. K. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, Vol. 31, Issue 3 https://doi.org/10.1016/0148-9062(94)90464-2	journal	June 1994
Nonlinear Fracture Properties from Size Effect Tests Bažant, Zdeněk P.; Kim, Jin‐Keun; Pfeiffer, Phillip A. Journal of Structural Engineering, Vol. 112, Issue 2 https://doi.org/10.1061/(ASCE)0733-9445(1986)112:2(289)	journal	February 1986
A laboratory study of the elastic anisotropy in the Mancos Shale at seismic frequencies Mikhaltsevitch, Vassili; Lebedev, Maxim; Gurevich, Boris SEG Technical Program Expanded Abstracts 2016 https://doi.org/10.1190/segam2016-13850199.1	conference	September 2016
An over-deterministic method for calculation of coefficients of crack tip asymptotic field from finite element analysis: CALCULATING COEFFICIENTS OF CRACK TIP ASYMPTOTIC FIELD FROM FE ANALYSIS Ayatollahi, M. R.; Nejati, M. Fatigue & Fracture of Engineering Materials & Structures, Vol. 34, Issue 3 https://doi.org/10.1111/j.1460-2695.2010.01504.x	journal	February 2011
Fracture toughness anisotropy in shale: FRACTURE TOUGHNESS ANISOTROPY IN SHALE Chandler, Michael R.; Meredith, Philip G.; Brantut, Nicolas Journal of Geophysical Research: Solid Earth, Vol. 121, Issue 3 https://doi.org/10.1002/2015JB012756	journal	March 2016
Application of Digital Image Correlation (DIC) in Dynamic Notched Semi-Circular Bend (NSCB) Tests Gao, G.; Huang, S.; Xia, K. Experimental Mechanics, Vol. 55, Issue 1 https://doi.org/10.1007/s11340-014-9863-5	journal	March 2014
The interaction of propagating opening mode fractures with preexisting discontinuities in shale: SHALE VEIN-FRACTURE INTERACTION Lee, Hunjoo P.; Olson, Jon E.; Holder, Jon Journal of Geophysical Research: Solid Earth, Vol. 120, Issue 1 https://doi.org/10.1002/2014JB011358	journal	January 2015
Experimental and numerical study on the fracture process zone and fracture toughness determination for ISRM-suggested semi-circular bend rock specimen Wei, M. D.; Dai, F.; Xu, N. W. Engineering Fracture Mechanics, Vol. 154 https://doi.org/10.1016/j.engfracmech.2016.01.002	journal	March 2016
Fracture Properties of Nash Point Shale as a Function of Orientation to Bedding Forbes Inskip, Nathaniel D.; Meredith, Philip G.; Chandler, Michael R. Journal of Geophysical Research: Solid Earth, Vol. 123, Issue 10 https://doi.org/10.1029/2018JB015943	journal	October 2018
Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens Chang, Soo-Ho; Lee, Chung-In; Jeon, Seokwon Engineering Geology, Vol. 66, Issue 1-2 https://doi.org/10.1016/S0013-7952(02)00033-9	journal	October 2002
Crack propagation trajectories for rocks under mixed mode I–II fracture Al-Shayea, Naser A. Engineering Geology, Vol. 81, Issue 1 https://doi.org/10.1016/j.enggeo.2005.07.013	journal	September 2005
Fracture of sandstone characterized by digital image correlation Lin, Qing; Labuz, Joseph F. International Journal of Rock Mechanics and Mining Sciences, Vol. 60 https://doi.org/10.1016/j.ijrmms.2012.12.043	journal	June 2013
Experimental and numerical investigations on fracture process zone of rock-concrete interface: FPZ Evolution of Rock-Concrete Interface Dong, W.; Yang, D.; Zhou, X. Fatigue & Fracture of Engineering Materials & Structures, Vol. 40, Issue 5 https://doi.org/10.1111/ffe.12558	journal	November 2016

Similar Records

Using Digital Image Correlation for Evaluating the Impact of Brine on Swelling of Heterogeneous Shales

Journal Article · 2021 · Rock Mechanics and Rock Engineering · OSTI ID:1976648

Measurement of Deformation Heterogeneity During Shale Swelling Using Digital Image Correlation

Journal Article · 2021 · Journal of Energy Resources Technology · OSTI ID:1980663

Analyzing the Validity of Brazilian Testing Using Digital Image Correlation and Numerical Simulation Techniques

Journal Article · 2020 · Energies (Basel) · OSTI ID:1799942

Related Subjects

Engineering
Geology

Evaluation of Fracture Toughness of Sandstone and Shale Using Digital Image Correlation

Citation Formats

References (41)

Similar Records

Related Subjects