A constitutive model for glass–ceramic materials

Lester, B. T.; Long, K. N.

doi:10.1016/j.mechmat.2021.103849

Title: A constitutive model for glass–ceramic materials

Journal Article · Sat Mar 27 00:00:00 EDT 2021 · Mechanics of Materials

DOI:https://doi.org/10.1016/j.mechmat.2021.103849· OSTI ID:1778031

^[1]; Long, K. N. ^[1]

Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

Glass–ceramics have received recent attention for use in glass–ceramic to metal hermetic seals. Due to their heterogeneous microstructure, these materials exhibit a number of advantageous responses over conventional glass based seals. Key amongst them is the possibility of a controllable thermal strain response and apparent coefficient of thermal expansion which may be used to minimize thermally induced residual stresses for aforementioned seals. Furthermore, these behaviors result from an inorganic glass matrix and variety of crystalline ceramic phases including silica polymorph(s) that may undergo reversible solid-to-solid transformations with associated inelastic strain. Correspondingly, these materials exhibit complex thermomechanical responses associated with multiple inelastic mechanisms (viscoelasticity and phase transformation). While modeling these behaviors is essential for developing and analyzing the corresponding applications, no such model exists. Therefore, in this work a three-dimensional continuum constitutive model for glass–ceramic materials combining these various inelastic mechanisms is developed via an internal state variable approach. A corresponding fully implicit three dimensional numerical formulation is also proposed and implemented. The model is used to simulate existing experiments and validate the proposed formalism. As an example, the simple seal problem of a glass–ceramic seal inside a concentric metal shell is explored. Finally, the impact of the cooling rates, viscoelastic shift factors, and inelastic strain on final residual stress state are all investigated and the differing contributions highlighted.

View Accepted Manuscript (DOE)

View Accepted Manuscript (Publisher)

Cite

Export

Save

Research Organization:: Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

Sponsoring Organization:: USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: AC04-94AL85000; NA0003525

OSTI ID:: 1778031

Alternate ID(s):: OSTI ID: 1828410

Report Number(s):: SAND-2021-3654J; 695069

Journal Information:: Mechanics of Materials, Vol. 158; ISSN 0167-6636

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (56)

Thermodynamic constitutive equations for materials with memory on a material time scale Lustig, Steven R.; Shay, Robert M.; Caruthers, James M. Journal of Rheology, Vol. 40, Issue 1 https://doi.org/10.1122/1.550789	journal	January 1996
Constitutive model for the numerical analysis of phase transformation in polycrystalline shape memory alloys Lagoudas, Dimitris; Hartl, Darren; Chemisky, Yves International Journal of Plasticity, Vol. 32-33 https://doi.org/10.1016/j.ijplas.2011.10.009	journal	May 2012
Understanding the mechanism for the mechanical property degradation of a lithium disilicate glass-ceramic by annealing Li, D.; Li, X. C.; Zhang, Z. Z. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 78 https://doi.org/10.1016/j.jmbbm.2017.11.003	journal	February 2018
The thermodynamics of elastic materials with heat conduction and viscosity Coleman, Bernard D.; Noll, Walter Archive for Rational Mechanics and Analysis, Vol. 13, Issue 1 https://doi.org/10.1007/BF01262690	journal	December 1963
Three-dimensional modeling and numerical analysis of rate-dependent irrecoverable deformation in shape memory alloys Hartl, Darren J.; Chatzigeorgiou, George; Lagoudas, Dimitris C. International Journal of Plasticity, Vol. 26, Issue 10 https://doi.org/10.1016/j.ijplas.2010.01.002	journal	October 2010
A thermodynamic framework for constitutive modeling of time- and rate-dependent materials. Part I: Theory Abu Al-Rub, Rashid K.; Darabi, Masoud K. International Journal of Plasticity, Vol. 34 https://doi.org/10.1016/j.ijplas.2012.01.002	journal	July 2012
Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity Rice, J. R. Journal of the Mechanics and Physics of Solids, Vol. 19, Issue 6 https://doi.org/10.1016/0022-5096(71)90010-X	journal	November 1971
Recent developments in the preparation, characterization and applications of glass- and glass–ceramic-to-metal seals and coatings Donald, I. W.; Mallinson, P. M.; Metcalfe, B. L. Journal of Materials Science, Vol. 46, Issue 7 https://doi.org/10.1007/s10853-010-5095-y	journal	January 2011
Crystalline phase formation, microstructure and mechanical properties of a lithium disilicate glass–ceramic Huang, Saifang; Zhang, Bo; Huang, Zhaohui Journal of Materials Science, Vol. 48, Issue 1 https://doi.org/10.1007/s10853-012-6738-y	journal	July 2012
A thermodynamically-based constitutive model for thermoplastic polymers coupling viscoelasticity, viscoplasticity and ductile damage Krairi, Anouar; Doghri, Issam International Journal of Plasticity, Vol. 60 https://doi.org/10.1016/j.ijplas.2014.04.010	journal	September 2014
A thermodynamic framework for constitutive modeling of time- and rate-dependent materials. Part II: Numerical aspects and application to asphalt concrete Darabi, Masoud K.; Abu Al-Rub, Rashid K.; Masad, Eyad A. International Journal of Plasticity, Vol. 35 https://doi.org/10.1016/j.ijplas.2012.02.003	journal	August 2012
Thermodynamics with Internal State Variables Coleman, Bernard D.; Gurtin, Morton E. The Journal of Chemical Physics, Vol. 47, Issue 2 https://doi.org/10.1063/1.1711937	journal	July 1967
A Model of Structural Relaxation in Glass Narayanaswamy, O. S. Journal of the American Ceramic Society, Vol. 54, Issue 10 https://doi.org/10.1111/j.1151-2916.1971.tb12186.x	journal	October 1971
Sealing Glass‐Ceramics with Near‐Linear Thermal Strain, Part II : Sequence of Crystallization and Phase Stability Rodriguez, Mark A.; Griego, James J. M.; Dai, Steve Journal of the American Ceramic Society, Vol. 99, Issue 11 https://doi.org/10.1111/jace.14438	journal	August 2016
A thermodynamically consistent, nonlinear viscoelastic approach for modeling glassy polymers Caruthers, James M.; Adolf, Douglas B.; Chambers, Robert S. Polymer, Vol. 45, Issue 13 https://doi.org/10.1016/j.polymer.2004.04.021	journal	June 2004
Extensive validation of a thermodynamically consistent, nonlinear viscoelastic model for glassy polymers Adolf, Douglas B.; Chambers, Robert S.; Caruthers, James M. Polymer, Vol. 45, Issue 13 https://doi.org/10.1016/j.polymer.2004.04.022	journal	June 2004
Interconversion of Prony series for relaxation and creep Loy, R. J.; de Hoog, F. R.; Anderssen, R. S. Journal of Rheology, Vol. 59, Issue 5 https://doi.org/10.1122/1.4929398	journal	September 2015
Validation of a model for static and dynamic recrystallization in metals Brown, Arthur A.; Bammann, Douglas J. International Journal of Plasticity, Vol. 32-33 https://doi.org/10.1016/j.ijplas.2011.12.006	journal	May 2012
Modeling thermal recovery of the Mullins effect Wang, Shuolun; Chester, Shawn A. Mechanics of Materials, Vol. 126 https://doi.org/10.1016/j.mechmat.2018.08.002	journal	November 2018
Modeling of coupled phase transformation and reorientation in shape memory alloys under non-proportional thermomechanical loading Chatziathanasiou, Dimitris; Chemisky, Yves; Chatzigeorgiou, George International Journal of Plasticity, Vol. 82 https://doi.org/10.1016/j.ijplas.2016.03.005	journal	July 2016
Three-dimensional constitutive model for structural and functional fatigue of shape memory alloy actuators Chemisky, Yves; Hartl, Darren J.; Meraghni, Fodil International Journal of Fatigue, Vol. 112 https://doi.org/10.1016/j.ijfatigue.2018.03.016	journal	July 2018
The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming Liquids Williams, Malcolm L.; Landel, Robert F.; Ferry, John D. Journal of the American Chemical Society, Vol. 77, Issue 14 https://doi.org/10.1021/ja01619a008	journal	July 1955
A thermodynamical constitutive model for shape memory materials. Part I. The monolithic shape memory alloy Boyd, J. G.; Lagoudas, D. C. International Journal of Plasticity, Vol. 12, Issue 6 https://doi.org/10.1016/S0749-6419(96)00030-7	journal	January 1996
A modeling study on the thermomechanical behavior of glass-ceramic and self-healing glass seals at elevated temperatures Govindaraju, N.; Liu, W. N.; Sun, X. Journal of Power Sources, Vol. 190, Issue 2 https://doi.org/10.1016/j.jpowsour.2009.01.006	journal	May 2009
Experimental characterization of glass–ceramic seal properties and their constitutive implementation in solid oxide fuel cell stack models Stephens, E. V.; Vetrano, J. S.; Koeppel, B. J. Journal of Power Sources, Vol. 193, Issue 2 https://doi.org/10.1016/j.jpowsour.2009.02.080	journal	September 2009
Ultra-high thermal expansion glass–ceramics in the system MgO/Al2O3/TiO2/ZrO2/SiO2 by volume crystallization of cristobalite Hunger, Anja; Carl, Gunter; Gebhardt, Andreas Journal of Non-Crystalline Solids, Vol. 354, Issue 52-54 https://doi.org/10.1016/j.jnoncrysol.2008.09.001	journal	December 2008
Sealing glass‐ceramics with near‐linear thermal strain, part III : Stress modeling of strain and strain rate matched glass‐ceramic to metal seals Dai, Steve; Elisberg, Brenton; Calderone, James Journal of the American Ceramic Society, Vol. 100, Issue 8 https://doi.org/10.1111/jace.14821	journal	April 2017
Statistical continuum mechanics analysis of effective elastic properties in solid oxide fuel cell glass–ceramic seal material Milhans, J.; Li, D.; Khaleel, M. Journal of Power Sources, Vol. 195, Issue 17 https://doi.org/10.1016/j.jpowsour.2010.03.079	journal	September 2010
Numerical thermomechanical modelling of solid oxide fuel cells Peksen, Murat Progress in Energy and Combustion Science, Vol. 48 https://doi.org/10.1016/j.pecs.2014.12.001	journal	June 2015
A constitutive model for cyclic actuation of high-temperature shape memory alloys Chemisky, Yves; Chatzigeorgiou, George; Kumar, Parikshith Mechanics of Materials, Vol. 68 https://doi.org/10.1016/j.mechmat.2013.07.020	journal	January 2014
A simplified potential energy clock model for glassy polymers Adolf, Douglas B.; Chambers, Robert S.; Neidigk, Matthew A. Polymer, Vol. 50, Issue 17 https://doi.org/10.1016/j.polymer.2009.06.068	journal	August 2009
Review and perspectives: shape memory alloy composite systems Lester, Brian T.; Baxevanis, Theocharis; Chemisky, Yves Acta Mechanica, Vol. 226, Issue 12 https://doi.org/10.1007/s00707-015-1433-0	journal	October 2015
Modeling of cracking of the glass-based seals for solid oxide fuel cell Zhang, Tao; Zhu, Qingshan; Xie, Zhaohui Journal of Power Sources, Vol. 188, Issue 1 https://doi.org/10.1016/j.jpowsour.2008.11.053	journal	March 2009
Preparation, properties and chemistry of glass- and glass-ceramic-to-metal seals and coatings Donald, I. W. Journal of Materials Science, Vol. 28, Issue 11 https://doi.org/10.1007/BF00354689	journal	January 1993
On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material Qidwai, M. A.; Lagoudas, D. C. International Journal of Plasticity, Vol. 16, Issue 10-11 https://doi.org/10.1016/S0749-6419(00)00012-7	journal	January 2000
Thermal cycling and ageing of a glass-ceramic sealant for planar SOFCs Smeacetto, F.; Chrysanthou, A.; Salvo, M. International Journal of Hydrogen Energy, Vol. 36, Issue 18 https://doi.org/10.1016/j.ijhydene.2011.04.083	journal	September 2011
Calibration of excess thermodynamic properties and elastic constant variations associated with the alpha <-->beta phase transition in quartz Carpenter, Michael A.; Salje, Ekhard K. H.; Graeme-Barber, Ann American Mineralogist, Vol. 83, Issue 1-2 https://doi.org/10.2138/am-1998-1-201	journal	February 1998
Micromechanics of spatially uniform heterogeneous media: A critical review and emerging approaches Pindera, Marek-Jerzy; Khatam, Hamed; Drago, Anthony S. Composites Part B: Engineering, Vol. 40, Issue 5 https://doi.org/10.1016/j.compositesb.2009.03.007	journal	July 2009
Characterization and calibration of a viscoelastic simplified potential energy clock model for inorganic glasses Chambers, Robert S.; Tandon, Rajan; Stavig, Mark E. Journal of Non-Crystalline Solids, Vol. 432 https://doi.org/10.1016/j.jnoncrysol.2015.06.005	journal	January 2016
Characterization and performance of glass–ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs Smeacetto, F.; Salvo, M.; Ferraris, M. Journal of the European Ceramic Society, Vol. 28, Issue 13 https://doi.org/10.1016/j.jeurceramsoc.2008.03.035	journal	September 2008
Prediction of the effective coefficient of thermal expansion of heterogeneous media using two-point correlation functions Milhans, J.; Li, D. S.; Khaleel, M. Journal of Power Sources, Vol. 196, Issue 8 https://doi.org/10.1016/j.jpowsour.2010.12.086	journal	April 2011
Comparative finite element analysis of the stress–strain states in three different bonded solid oxide fuel cell seal designs Weil, K. S.; Koeppel, B. J. Journal of Power Sources, Vol. 180, Issue 1 https://doi.org/10.1016/j.jpowsour.2008.01.093	journal	May 2008
Silica Structure Studies: V, The Variable Inversion in Cristobalite Hill, V. G.; Roy, Rustum Journal of the American Ceramic Society, Vol. 41, Issue 12 https://doi.org/10.1111/j.1151-2916.1958.tb12911.x	journal	December 1958
Glass–ceramic seal to join Crofer 22 APU alloy to YSZ ceramic in planar SOFCs Smeacetto, F.; Salvo, M.; Ferraris, M. Journal of the European Ceramic Society, Vol. 28, Issue 1 https://doi.org/10.1016/j.jeurceramsoc.2007.05.006	journal	January 2008
Sealing Glass‐Ceramics with Near Linear Thermal Strain, Part I: Process Development and Phase Identification Dai, Steve; Rodriguez, Mark A.; Griego, James J. M. Journal of the American Ceramic Society, Vol. 99, Issue 11 https://doi.org/10.1111/jace.14364	journal	June 2016
Strength and Microstructure in Lithium Disilicate Glass-Ceramics Borom, Marcus P.; Turkalo, Anna M.; Doremus, Robert H. Journal of the American Ceramic Society, Vol. 58, Issue 9-10 https://doi.org/10.1111/j.1151-2916.1975.tb19004.x	journal	September 1975
Crystallization Kinetics of a Complex Lithium Silicate Glass-Ceramic Hammetter, William F.; Loehman, Ronald E. Journal of the American Ceramic Society, Vol. 70, Issue 8, p. 577-582 https://doi.org/10.1111/j.1151-2916.1987.tb05709.x	journal	August 1987
Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models: TRUST-REGION BASED CONSTITUTIVE MODEL INTEGRATION Lester, B. T.; Scherzinger, W. M. International Journal for Numerical Methods in Engineering, Vol. 112, Issue 3 https://doi.org/10.1002/nme.5515	journal	February 2017
Glass-based seals for solid oxide fuel and electrolyzer cells – A review Mahapatra, M. K.; Lu, K. Materials Science and Engineering: R: Reports, Vol. 67, Issue 5-6, p. 65-85 https://doi.org/10.1016/j.mser.2009.12.002	journal	February 2010
Phase and microstructure formation and their influence on the strength of two types of glass-ceramics Dittmer, M.; Ritzberger, C.; Schweiger, M. Journal of Non-Crystalline Solids, Vol. 384 https://doi.org/10.1016/j.jnoncrysol.2013.03.009	journal	January 2014
A return mapping algorithm for isotropic and anisotropic plasticity models using a line search method Scherzinger, W. M. Computer Methods in Applied Mechanics and Engineering, Vol. 317 https://doi.org/10.1016/j.cma.2016.11.026	journal	April 2017
Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling Nguyen, Ba Nghiep; Koeppel, Brian J.; Ahzi, Said Journal of the American Ceramic Society, Vol. 89, Issue 4 https://doi.org/10.1111/j.1551-2916.2005.00874.x	journal	April 2006
Phenomenological multi-mechanisms constitutive modelling for thermoplastic polymers, implicit implementation and experimental validation Praud, F.; Chatzigeorgiou, G.; Bikard, J. Mechanics of Materials, Vol. 114 https://doi.org/10.1016/j.mechmat.2017.07.001	journal	November 2017
Accelerated devitrification of a strontiumlanthanumaluminoborosilicate based intermediate temperature solid oxide fuel cell glass sealant and its effect on thermophysical behaviour of the glass ceramics Ojha, Prasanta Kumar; Chongdar, T. K.; Gokhale, N. M. Journal of Power Sources, Vol. 221 https://doi.org/10.1016/j.jpowsour.2012.07.110	journal	January 2013
Predicting Young's modulus of glass/ceramic sealant for solid oxide fuel cell considering the combined effects of aging, micro-voids and self-healing Liu, W.; Sun, X.; Khaleel, M. Journal of Power Sources, Vol. 185, Issue 2 https://doi.org/10.1016/j.jpowsour.2008.07.017	journal	December 2008
Synthesis and properties of a barium aluminosilicate solid oxide fuel cell glass–ceramic sealant Meinhardt, K. D.; Kim, D.-S.; Chou, Y.-S. Journal of Power Sources, Vol. 182, Issue 1, p. 188-196 https://doi.org/10.1016/j.jpowsour.2008.03.079	journal	July 2008

Similar Records

A viscoelastic material model for computing stresses in glass

Technical Report · Sun Jul 01 00:00:00 EDT 1990 · OSTI ID:1778031

Chambers, R S

Room Temperature Quasi-static Characterization and Constitutive Model Parametrization of Flexible Polyurethane Foams of Different Densities Loaded in Different Orientations

Technical Report · Thu Oct 01 00:00:00 EDT 2020 · OSTI ID:1778031

Long, Kevin Nicholas; Hamel, Craig M.; Waymel, Robert; +3 more

Constitutive Model Development for Aging Polymer Encapsulants (ASC P&EM FY2021 L2 Milestone 7836)

Technical Report · Wed Sep 01 00:00:00 EDT 2021 · OSTI ID:1778031

Cundiff, Kenneth N.; Long, Kevin N.; Kropka, Jamie M.; +2 more

Related Subjects

36 MATERIALS SCIENCE
Constitutive modeling
glass-ceramics
viscoelasticity
phase transformation
residual stresses

Title: A constitutive model for glass–ceramic materials

Citation Formats

References (56)

Similar Records

Related Subjects