Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Kirkendall pore evolution during interdiffusion and homogenization of titanium-coated nickel microwi

Journal Article · · Intermetallics

Research Organization:
Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)
Sponsoring Organization:
DOE - Office Of Science; National Science Foundation (NSF)
OSTI ID:
1777305
Journal Information:
Intermetallics, Vol. 134
Country of Publication:
United States
Language:
ENGLISH

References (40)

Effect of Low‐Temperature Phase Changes on the Mechanical Properties of Alloys near Composition TiNi journal May 1963
Nitinol – Its Use in Vascular Surgery and Other Applications journal June 2000
Non-medical applications of shape memory alloys journal December 1999
A review of shape memory alloy research, applications and opportunities journal April 2014
An overview of nitinol medical applications journal December 1999
Corrosion behaviour of NiTi alloy journal January 2009
NiTi with 3D-interconnected microchannels produced by liquid phase sintering and electrochemical dissolution of steel tubes journal September 2014
Biomaterials: Past Successes and Future Problems journal June 2003
Porous NiTi for bone implants: A review journal July 2008
Porous NiTi by creep expansion of argon-filled pores journal October 2009
Shape-memory NiTi foams produced by solid-state replication with NaF journal December 2007
Processing of porous TiNi alloys using magnesium as space holder journal June 2009
Porous shape-memory NiTi-Nb with microchannel arrays journal August 2016
High strength, low stiffness, porous NiTi with superelastic properties journal November 2005
Fabrication of SLM NiTi Shape Memory Alloy via Repetitive Laser Scanning journal January 2018
Permeability measurements and modeling of topology-optimized metallic 3-D woven lattices journal December 2014
Metals for bone implants. Part 1. Powder metallurgy and implant rendering journal October 2014
Process development and characterization of additively manufactured nickel–titanium shape memory parts journal July 2016
Fabrication of NiTi through additive manufacturing: A review journal October 2016
Influence of SLM on shape memory and compression behaviour of NiTi scaffolds journal January 2015
Processing and Characterization of Liquid-Phase Sintered NiTi Woven Structures journal March 2018
Transient liquid-phase bonded 3D woven Ni-based superalloys journal November 2015
Pack Aluminization Synthesis of Superalloy 3D Woven and 3D Braided Structures journal October 2014
Experimental and modeling study of compressive creep in 3D-woven Ni-based superalloys journal August 2018
Effect of Cr content on interdiffusion and Kirkendall pore formation during homogenization of pack-aluminized Ni and Ni-Cr wires journal October 2018
Pack cementation processes journal March 1986
Synthesis of NiTi microtubes via the Kirkendall effect during interdiffusion of Ti-coated Ni wires journal January 2018
Diffusion in the titanium-nickel system: II. calculations of chemical and intrinsic diffusion coefficients journal August 1974
Hydrothermal Synthesis and Formation Mechanism of Micrometer-sized MoO 2 Hollow Spheres journal December 2006
MoS2 hierarchical hollow cubic cages assembled by bilayers: one-step synthesis and their electrochemical hydrogen storage properties journal January 2006
Growth mechanism and characterization of zinc oxide microcages journal May 2004
Controlled porosity by an extreme kirkendall effect journal July 1974
In situ X-ray tomographic microscopy of Kirkendall pore formation and evolution during homogenization of pack-aluminized Ni–Cr wires journal January 2016
Shape-memory characterization of NiTi microtubes fabricated through interdiffusion of Ti-Coated Ni wires journal September 2018
Effect of diffusion distance on evolution of Kirkendall pores in titanium-coated nickel wires journal January 2019
Three-Dimensional X-ray Microtomography journal September 1987
X-ray microtomography journal December 2010
TomoPy: a framework for the analysis of synchrotron tomographic data journal August 2014
X-ray micro-tomography an attractive characterisation technique in materials science journal January 2003
Porous NiTi alloy prepared from elemental powder sintering journal October 1998