U.S. Department of EnergyOffice of Scientific and Technical Information
Tritium Transport Phenomena in Molten-Salt Reactors
Abstract
In this work, we review phenomena relevant to tritium transport in molten-salt reactors, which produce tritium from lithium and beryllium salts at significantly higher levels than other reactor types. Modeling of such phenomena began following MSRE operations, and these early models attempted to predict measured tritium distributions in the MSRE, accounting for turbulent mass-transport processes (using established heat transfer correlations), permeation through a variety of metal structures such as heat exchanger tubes, and transport to and from bubbles introduced into the salt by gas sparging. The models reasonably reproduced the MSRE data, but did so best when the permeability of structures was reduced by about a factor of 1,000. This issue does not appear to have been conclusively resolved, and all of the more recent attempts to model tritium transport in molten salts appear to make use of the same methodology. MSRE remains, however, essentially our only source of integral tritium transport data relevant to MSRs. Here, we generalize the MSRE approach to permeation in order to include potential rate-limiting effects at interfaces, as well the effects of added hydrogen. Appropriately non-dimensionalized, this system of equations identifies two dimensionless numbers whose relative values clearly delineate the conditions under which massmore »
- Publication Date:
- Research Org.:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Org.:
- USDOE Office of Nuclear Energy (NE)
- OSTI Identifier:
- 1777267
- Report Number(s):
- INL/EXT-20-59927-Rev000
- DOE Contract Number:
- DE-AC07-05ID14517
- Resource Type:
- Program Document
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 22 - GENERAL STUDIES OF NUCLEAR REACTORS; Tritium; Molten Salt Reactor
Citation Formats
Humrickhouse, Paul W, and Fuerst, Thomas F. Tritium Transport Phenomena in Molten-Salt Reactors. United States: N. p., 2020.
Web.
Humrickhouse, Paul W, & Fuerst, Thomas F. Tritium Transport Phenomena in Molten-Salt Reactors. United States.
Humrickhouse, Paul W, and Fuerst, Thomas F. 2020.
"Tritium Transport Phenomena in Molten-Salt Reactors". United States. https://www.osti.gov/servlets/purl/1777267.
@article{osti_1777267,
title = {Tritium Transport Phenomena in Molten-Salt Reactors},
author = {Humrickhouse, Paul W and Fuerst, Thomas F},
abstractNote = {In this work, we review phenomena relevant to tritium transport in molten-salt reactors, which produce tritium from lithium and beryllium salts at significantly higher levels than other reactor types. Modeling of such phenomena began following MSRE operations, and these early models attempted to predict measured tritium distributions in the MSRE, accounting for turbulent mass-transport processes (using established heat transfer correlations), permeation through a variety of metal structures such as heat exchanger tubes, and transport to and from bubbles introduced into the salt by gas sparging. The models reasonably reproduced the MSRE data, but did so best when the permeability of structures was reduced by about a factor of 1,000. This issue does not appear to have been conclusively resolved, and all of the more recent attempts to model tritium transport in molten salts appear to make use of the same methodology. MSRE remains, however, essentially our only source of integral tritium transport data relevant to MSRs. Here, we generalize the MSRE approach to permeation in order to include potential rate-limiting effects at interfaces, as well the effects of added hydrogen. Appropriately non-dimensionalized, this system of equations identifies two dimensionless numbers whose relative values clearly delineate the conditions under which mass transport, surface effects, permeation, and hydrogen swamping are expected to become rate-limiting. We also describe the preliminary conceptual design of a forced convection FLiBe loop, into which tritium would be introduced for the purpose of providing validation data for such a model. The primary purpose of this is to investigate the coupled transport phenomena described above and identify those that are rate-limiting in MSRs. Additional test section configurations are described that would address other transport phenomena relevant to MSRs, including bubbly flows and graphite interactions.},
doi = {},
url = {https://www.osti.gov/biblio/1777267},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2020},
month = {9}
}