Hierarchically-porous metallic scaffolds via 3D extrusion and reduction of oxide particle inks with

Kenel, C.; Geisendorfer, N.R.; Shah, R.N.; Dunand, D.C.

doi:10.1016/j.addma.2020.101637

Hierarchically-porous metallic scaffolds via 3D extrusion and reduction of oxide particle inks with

Journal Article · 01 January 2021 · Additive Manu.

DOI:https://doi.org/10.1016/j.addma.2020.101637· OSTI ID:1772771

Kenel, C.; Geisendorfer, N.R.; Shah, R.N.; Dunand, D.C.

Research Organization:: Argonne National Lab. (ANL), Argonne, IL (United States). Advanced Photon Source (APS)

Sponsoring Organization:: DOE - Office Of Science; National Science Foundation (NSF)

OSTI ID:: 1772771

Journal Information:: Additive Manu., Vol. 37

Country of Publication:: United States

Language:: ENGLISH

References (38)

Bioinspired structural materials Wegst, Ulrike G. K.; Bai, Hao; Saiz, Eduardo Nature Materials, Vol. 14, Issue 1 https://doi.org/10.1038/nmat4089	journal	October 2014
Nanoporous Gold Catalysts for Selective Gas-Phase Oxidative Coupling of Methanol at Low Temperature Wittstock, A.; Zielasek, V.; Biener, J. Science, Vol. 327, Issue 5963 https://doi.org/10.1126/science.1183591	journal	January 2010
Bioinspired Engineering of Thermal Materials Tao, Peng; Shang, Wen; Song, Chengyi Advanced Materials, Vol. 27, Issue 3 https://doi.org/10.1002/adma.201401449	journal	September 2014
Nature’s hierarchical materials Fratzl, Peter; Weinkamer, Richard Progress in Materials Science, Vol. 52, Issue 8 https://doi.org/10.1016/j.pmatsci.2007.06.001	journal	November 2007
3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics Minas, Clara; Carnelli, Davide; Tervoort, Elena Advanced Materials, Vol. 28, Issue 45 https://doi.org/10.1002/adma.201603390	journal	September 2016
Architected cellular ceramics with tailored stiffness via direct foam writing Muth, Joseph T.; Dixon, Patrick G.; Woish, Logan Proceedings of the National Academy of Sciences, Vol. 114, Issue 8 https://doi.org/10.1073/pnas.1616769114	journal	February 2017
3D printing of sacrificial templates into hierarchical porous materials Alison, Lauriane; Menasce, Stefano; Bouville, Florian Scientific Reports, Vol. 9, Issue 1 https://doi.org/10.1038/s41598-018-36789-z	journal	January 2019
3D-printing porosity: A new approach to creating elevated porosity materials and structures Jakus, A. E.; Geisendorfer, N. R.; Lewis, P. L. Acta Biomaterialia, Vol. 72 https://doi.org/10.1016/j.actbio.2018.03.039	journal	May 2018
Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing Zhu, Cheng; Qi, Zhen; Beck, Victor A. Science Advances, Vol. 4, Issue 8 https://doi.org/10.1126/sciadv.aas9459	journal	August 2018
Immersion precipitation 3D printing ( ip 3DP) Karyappa, Rahul; Ohno, Akihiro; Hashimoto, Michinao Materials Horizons, Vol. 6, Issue 9 https://doi.org/10.1039/C9MH00730J	journal	January 2019
Solid State Porous Metal Production: A Review of the Capabilities, Characteristics, and Challenges Atwater, Mark A.; Guevara, Laura N.; Darling, Kris A. Advanced Engineering Materials, Vol. 20, Issue 7 https://doi.org/10.1002/adem.201700766	journal	January 2018
Replication Processing of Highly Porous Materials Conde, Y.; Despois, J. -F.; Goodall, R. Advanced Engineering Materials, Vol. 8, Issue 9 https://doi.org/10.1002/adem.200600077	journal	September 2006
Metallic Architectures from 3D-Printed Powder-Based Liquid Inks Jakus, Adam E.; Taylor, Shannon L.; Geisendorfer, Nicholas R. Advanced Functional Materials, Vol. 25, Issue 45 https://doi.org/10.1002/adfm.201503921	journal	November 2015
Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W-Cu Composites Calvo, Micha; Jakus, Adam E.; Shah, Ramille N. Advanced Engineering Materials, Vol. 20, Issue 9 https://doi.org/10.1002/adem.201800354	journal	June 2018
Iron and Nickel Cellular Structures by Sintering of 3D-Printed Oxide or Metallic Particle Inks : Iron and Nickel Cellular Structures by Sintering… Taylor, Shannon L.; Jakus, Adam E.; Shah, Ramille N. Advanced Engineering Materials, Vol. 19, Issue 11 https://doi.org/10.1002/adem.201600365	journal	September 2016
3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices Kenel, Christoph; Casati, Nicola P. M.; Dunand, David C. Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-08763-4	journal	February 2019
Kinetics of alloy formation and densification in Fe-Ni-Mo microfilaments extruded from oxide- or metal-powder inks Kenel, C.; Davenport, T.; Li, X. Acta Materialia, Vol. 193 https://doi.org/10.1016/j.actamat.2020.04.038	journal	July 2020
Ni-Mn-Ga micro-trusses via sintering of 3D-printed inks containing elemental powders Taylor, Shannon L.; Shah, Ramille N.; Dunand, David C. Acta Materialia, Vol. 143 https://doi.org/10.1016/j.actamat.2017.10.002	journal	January 2018
The effect of strut size on microstructure and compressive strength of porous Ti6Al4V lattices printed via Direct Ink Writing Elsayed, Hamada; Novak, Nejc; Vesenjak, Matej Materials Science and Engineering: A, Vol. 787 https://doi.org/10.1016/j.msea.2020.139484	journal	June 2020
Direct ink writing of porous titanium (Ti6Al4V) lattice structures Elsayed, Hamada; Rebesan, Pietro; Giacomello, Giovanni Materials Science and Engineering: C, Vol. 103 https://doi.org/10.1016/j.msec.2019.109794	journal	October 2019
Characterization of 100Cr6 lattice structures produced by robocasting Yetna N'Jock, M.; Camposilvan, E.; Gremillard, L. Materials & Design, Vol. 121 https://doi.org/10.1016/j.matdes.2017.02.066	journal	May 2017
Environment-friendly and reusable ink for 3D printing of metallic structures Xu, Chao; Wu, Qinghua; L'Espérance, Gilles Materials & Design, Vol. 160 https://doi.org/10.1016/j.matdes.2018.09.024	journal	December 2018
Mechanical behaviour of 3D printed ordered pore topological iron scaffold Mishra, Dipesh Kumar; Pandey, Pulak Mohan Materials Science and Engineering: A, Vol. 783 https://doi.org/10.1016/j.msea.2020.139293	journal	May 2020
3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices Song, Binna; Kenel, Christoph; Dunand, David C. Additive Manufacturing, Vol. 35 https://doi.org/10.1016/j.addma.2020.101412	journal	October 2020
Printed Origami Structures Ahn, Bok Yeop; Shoji, Daisuke; Hansen, Christopher J. Advanced Materials, Vol. 22, Issue 20 https://doi.org/10.1002/adma.200904232	journal	May 2010
Microstructure and Mechanical Properties of Reticulated Titanium Scrolls Hong, Eunji; Ahn, Bok Y.; Shoji, Daisuke Advanced Engineering Materials, Vol. 13, Issue 12 https://doi.org/10.1002/adem.201100082	journal	August 2011
Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications Jakus, Adam E.; Secor, Ethan B.; Rutz, Alexandra L. ACS Nano, Vol. 9, Issue 4, p. 4636-4648 https://doi.org/10.1021/acsnano.5b01179	journal	February 2015
Site percolation in randomly packed spheres Powell, M. J. Physical Review B, Vol. 20, Issue 10 https://doi.org/10.1103/PhysRevB.20.4194	journal	November 1979
Initial Sintering of Alumina and Hematite Coble, R. L. Journal of the American Ceramic Society, Vol. 41, Issue 2 https://doi.org/10.1111/j.1151-2916.1958.tb13519.x	journal	February 1958
Reduction of Fe2O3 with hydrogen Zieliński, Jerzy; Zglinicka, Ilona; Znak, Leszek Applied Catalysis A: General, Vol. 381, Issue 1-2 https://doi.org/10.1016/j.apcata.2010.04.003	journal	June 2010
NiTi-Nb micro-trusses fabricated via extrusion-based 3D-printing of powders and transient-liquid-phase sintering Taylor, Shannon L.; Ibeh, Amaka J.; Jakus, Adam E. Acta Biomaterialia, Vol. 76 https://doi.org/10.1016/j.actbio.2018.06.015	journal	August 2018
Microstructure and porosity evolution during sintering of Ni-Mn-Ga wires printed from inks containing elemental powders Taylor, Shannon L.; Shah, Ramille N.; Dunand, David C. Intermetallics, Vol. 104 https://doi.org/10.1016/j.intermet.2018.10.024	journal	January 2019
Multi and mixed 3D-printing of graphene-hydroxyapatite hybrid materials for complex tissue engineering: 3D-PRINT GRADED, MULTICOMPOSITIONAL, AND MULTIFUNCTIONAL CONSTRUCTS Jakus, Adam E.; Shah, Ramille. N. Journal of Biomedical Materials Research Part A, Vol. 105, Issue 1 https://doi.org/10.1002/jbm.a.35684	journal	October 2016
Sintering of micro-trusses created by extrusion-3D-printing of lunar regolith inks Taylor, Shannon L.; Jakus, Adam E.; Koube, Katie D. Acta Astronautica, Vol. 143 https://doi.org/10.1016/j.actaastro.2017.11.005	journal	February 2018
3D extruded composite thermoelectric threads for flexible energy harvesting Peng, J.; Witting, I.; Geisendorfer, N. Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-019-13461-2	journal	December 2019
Direct Ink Writing of 3D Functional Materials Lewis, J. A. Advanced Functional Materials, Vol. 16, Issue 17 https://doi.org/10.1002/adfm.200600434	journal	November 2006
3D Printing Fabrication of Amorphous Thermoelectric Materials with Ultralow Thermal Conductivity He, Minhong; Zhao, Yan; Wang, Biao Small, Vol. 11, Issue 44 https://doi.org/10.1002/smll.201502153	journal	October 2015
3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks Kim, Fredrick; Kwon, Beomjin; Eom, Youngho Nature Energy, Vol. 3, Issue 4 https://doi.org/10.1038/s41560-017-0071-2	journal	January 2018

Similar Records

Complex-shaped, finely-featured ZrC/W composites via shape-preserving reactive melt infiltration of porous WC structures fabricated by 3D ink extrusion

Journal Article · 2021 · Additive Manufacturing Letters · OSTI ID:1828395

Zhang, Dingchang; Kenel, Christoph; Caccia, Mario; +2 more

3D-ink-extruded titanium scaffolds with porous struts and bioactive supramolecular polymers for orthopedic implants

Journal Article · 2024 · Acta Biomaterialia · OSTI ID:2467561

Misiaszek, John P.; Sather, Nicholas A.; Goodwin, Alyssa M.; +7 more

Hierarchical porous metals with deterministic 3D morphology and shape via de-alloying of 3D printed alloys

Patent · 2021 · OSTI ID:1860064

Qi, Zhen; Biener, Juergen; Chen, Wen; +5 more

Hierarchically-porous metallic scaffolds via 3D extrusion and reduction of oxide particle inks with

Citation Formats

References (38)

Similar Records

Related Subjects