Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Elucidation of the Jahn-Teller effect in a pair of sodium isomer

Journal Article · · Nano Energy

Research Organization:
Brookhaven National Lab. (BNL), Upton, NY (United States)
Sponsoring Organization:
~OTHER
DOE Contract Number:
SC0012704
OSTI ID:
1760502
Report Number(s):
BNL-220850-2021-JACI
Journal Information:
Nano Energy, Vol. 77
Country of Publication:
United States
Language:
English

References (52)

Reversible Flat to Rippling Phase Transition in Fe Containing Layered Battery Electrode Materials July 2018
High Tap Density Co and Ni Containing P2-Na 0.66 MnO 2 Buckyballs: A Promising High Voltage Cathode for Stable Sodium-Ion Batteries June 2018
Research Development on Sodium-Ion Batteries October 2014
Layered Oxide Cathodes for Sodium-Ion Batteries: Phase Transition, Air Stability, and Performance November 2017
Orthorhombic Na[sub x]MnO[sub 2] as a Cathode Material for Secondary Sodium and Lithium Polymer Batteries January 1994
Sodium and Manganese Stoichiometry of P2-Type Na 2/3 MnO 2 September 2016
Unraveling the Role of Earth-Abundant Fe in the Suppression of Jahn–Teller Distortion of P′2-Type Na 2/3 MnO 2 : Experimental and Theoretical Studies October 2018
P2–Na x Co y Mn 1– y O 2 ( y = 0, 0.1) as Cathode Materials in Sodium-Ion Batteries—Effects of Doping and Morphology To Enhance Cycling Stability March 2016
P2-Na 0.67 Al x Mn 1− x O 2 : Cost-Effective, Stable and High-Rate Sodium Electrodes by Suppressing Phase Transitions and Enhancing Sodium Cation Mobility October 2019
Na 0.67 Mn 1−x Mg x O 2 (0 ≤ x ≤ 0.2): a high capacity cathode for sodium-ion batteries January 2014
Copper substituted P2-type Na 0.67 Cu x Mn 1−x O 2 : a stable high-power sodium-ion battery cathode January 2015
Anionic Redox Activity in a Newly Zn-Doped Sodium Layered Oxide P2-Na 2/3 Mn 1− y Zn y O 2 (0 < y < 0.23) October 2018
Stabilization of over-stoichiometric Mn4+ in layered Na2/3MnO2 June 2010
Inhomogeneous Electron Gas November 1964
Self-Consistent Equations Including Exchange and Correlation Effects November 1965
Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium May 1994
Projector augmented-wave method December 1994
Generalized Gradient Approximation Made Simple October 1996
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation July 2013
VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data October 2011
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis February 2013
Structural study of two layered phases in the NaxMnyO2 system. Electrochemical behavior of their lithium substituted derivatives January 2000
Influence of cooling rate on the structure and composition of NaxCoO2 (x∼ 0.65) January 2009
P′2-Na 2/3 Mn 0.9 Me 0.1 O 2 (Me = Mg, Ti, Co, Ni, Cu, and Zn): Correlation between Orthorhombic Distortion and Electrochemical Property October 2017
Highly Reversible Oxygen-Redox Chemistry at 4.1 V in Na 4/7− x [□ 1/7 Mn 6/7 ]O 2 (□: Mn Vacancy) April 2018
Unraveling the role of Ti in the stability of positive layered oxide electrodes for rechargeable Na-ion batteries January 2019
Na order and Co charge disproportionation in Na CoO2 March 2015
Elucidation of Anionic and Cationic Redox Reactions in a Prototype Sodium-Layered Oxide Cathode October 2019
Molecular Orbital Principles of Oxygen-Redox Battery Electrodes October 2017
A New P2‐Type Layered Oxide Cathode with Extremely High Energy Density for Sodium‐Ion Batteries February 2019
Study on the Reversible Electrode Reaction of Na 1– x Ni 0.5 Mn 0.5 O 2 for a Rechargeable Sodium-Ion Battery May 2012
Understanding the Structural Evolution and Redox Mechanism of a NaFeO 2 -NaCoO 2 Solid Solution for Sodium-Ion Batteries June 2016
Prototype Sodium-Ion Batteries Using an Air-Stable and Co/Ni-Free O3-Layered Metal Oxide Cathode October 2015
Ti-Substituted NaNi 0.5 Mn 0.5- x Ti x O 2 Cathodes with Reversible O3−P3 Phase Transition for High-Performance Sodium-Ion Batteries March 2017
A Honeycomb-Layered Na 3 Ni 2 SbO 6 : A High-Rate and Cycle-Stable Cathode for Sodium-Ion Batteries July 2014
A Practical High-Energy Cathode for Sodium-Ion Batteries Based on Uniform P2-Na 0.7 CoO 2 Microspheres April 2017
P2-type Na 2/3 Ni 1/3 Mn 2/3−x Ti x O 2 as a new positive electrode for higher energy Na-ion batteries January 2014
Synthesis, Structure, and Electrochemical Properties of the Layered Sodium Insertion Cathode Material: NaNi 1 / 3 Mn 1 / 3 Co 1 / 3 O 2 April 2012
Layered Na[Ni1/3Fe1/3Mn1/3]O2 cathodes for Na-ion battery application January 2012
Electrochemical properties of NaNi1/3Co1/3Fe1/3O2 as a cathode material for Na-ion batteries January 2014
NaCrO 2 cathode for high-rate sodium-ion batteries January 2015
O3-type Na[Fe 1/3 Ni 1/3 Ti 1/3 ]O 2 cathode material for rechargeable sodium ion batteries January 2016
A P2-Na 0.67 Co 0.5 Mn 0.5 O 2 cathode material with excellent rate capability and cycling stability for sodium ion batteries January 2016
Structural evolution and electrochemistry of monoclinic NaNiO2 upon the first cycling process July 2014
Electrochemical and Thermal Properties of α-NaFeO 2 Cathode for Na-Ion Batteries January 2013
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries April 2012
An advanced cathode for Na-ion batteries with high rate and excellent structural stability January 2013
A new electrode material for rechargeable sodium batteries: P2-type Na 2/3 [Mg 0.28 Mn 0.72 ]O 2 with anomalously high reversible capacity January 2014
Nature of the “Z”-phase in layered Na-ion battery cathodes January 2019
Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS May 2011
Equilibrium voltage and overpotential variation of nonaqueous Li–O 2 batteries using the galvanostatic intermittent titration technique January 2015
Jahn–Teller Assisted Na Diffusion for High Performance Na Ion Batteries September 2016