skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Thermal tomography 3D imaging of additively manufactured metallic structures

Authors:
ORCiD logo [1]; ORCiD logo [1];  [2]; ORCiD logo [3];  [4]; ORCiD logo [5]; ORCiD logo [1]; ORCiD logo [1]; ORCiD logo [1];  [6]
  1. Nuclear Science and Engineering Division, Argonne National Laboratory, Argonne, Illinois 60439, USA
  2. Nuclear Science and Engineering Division, Argonne National Laboratory, Argonne, Illinois 60439, USA, Department of Electrical and Computer Engineering, Illinois Institute of Technology, Chicago, Illinois 60616, USA
  3. Department of Electrical and Computer Engineering, Illinois Institute of Technology, Chicago, Illinois 60616, USA
  4. Nuclear Science and Engineering Division, Argonne National Laboratory, Argonne, Illinois 60439, USA, Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, USA
  5. Nuclear Science and Engineering Division, Argonne National Laboratory, Argonne, Illinois 60439, USA, Department of Physics, University of California Berkeley, Berkeley, California 94720, USA
  6. Westinghouse Electric Company, Hopkins, South Carolina 29061, USA
Publication Date:
Sponsoring Org.:
USDOE
OSTI Identifier:
1671852
Resource Type:
Journal Article: Publisher's Accepted Manuscript
Journal Name:
AIP Advances
Additional Journal Information:
Journal Name: AIP Advances Journal Volume: 10 Journal Issue: 10; Journal ID: ISSN 2158-3226
Publisher:
American Institute of Physics
Country of Publication:
United States
Language:
English

Citation Formats

Heifetz, A., Shribak, D., Zhang, X., Saniie, J., Fisher, Z. L., Liu, T., Sun, J. G., Elmer, T., Bakhtiari, S., and Cleary, W. Thermal tomography 3D imaging of additively manufactured metallic structures. United States: N. p., 2020. Web. doi:10.1063/5.0016222.
Heifetz, A., Shribak, D., Zhang, X., Saniie, J., Fisher, Z. L., Liu, T., Sun, J. G., Elmer, T., Bakhtiari, S., & Cleary, W. Thermal tomography 3D imaging of additively manufactured metallic structures. United States. doi:10.1063/5.0016222.
Heifetz, A., Shribak, D., Zhang, X., Saniie, J., Fisher, Z. L., Liu, T., Sun, J. G., Elmer, T., Bakhtiari, S., and Cleary, W. Thu . "Thermal tomography 3D imaging of additively manufactured metallic structures". United States. doi:10.1063/5.0016222.
@article{osti_1671852,
title = {Thermal tomography 3D imaging of additively manufactured metallic structures},
author = {Heifetz, A. and Shribak, D. and Zhang, X. and Saniie, J. and Fisher, Z. L. and Liu, T. and Sun, J. G. and Elmer, T. and Bakhtiari, S. and Cleary, W.},
abstractNote = {},
doi = {10.1063/5.0016222},
journal = {AIP Advances},
issn = {2158-3226},
number = 10,
volume = 10,
place = {United States},
year = {2020},
month = {10}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record at 10.1063/5.0016222

Save / Share:

Works referenced in this record:

Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
journal, April 2016


Thermographic Microstructure Monitoring in Electron Beam Additive Manufacturing
journal, March 2017

  • Raplee, J.; Plotkowski, A.; Kirka, M. M.
  • Scientific Reports, Vol. 7, Issue 1
  • DOI: 10.1038/srep43554

X-ray computed tomography for additive manufacturing: a review
journal, June 2016


Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
journal, September 1961

  • Parker, W. J.; Jenkins, R. J.; Butler, C. P.
  • Journal of Applied Physics, Vol. 32, Issue 9
  • DOI: 10.1063/1.1728417

Pulsed photothermal modeling of layered materials
journal, January 1986

  • Balageas, D. L.; Krapez, J. C.; Cielo, P.
  • Journal of Applied Physics, Vol. 59, Issue 2
  • DOI: 10.1063/1.336690

Temporal and spatial deep learning network for infrared thermal defect detection
journal, December 2019


Radiative transport and optical tomography with large datasets
journal, January 2016

  • Machida, Manabu; Panasyuk, George Y.; Wang, Zheng-Min
  • Journal of the Optical Society of America A, Vol. 33, Issue 4
  • DOI: 10.1364/josaa.33.000551

Material Evaluation by Infrared Thermography
journal, July 2016


Quantitative Three-Dimensional Imaging of Heterogeneous Materials by Thermal Tomography
journal, July 2016


Metal Additive Manufacturing: A Review of Mechanical Properties
journal, July 2016


Applications of non-destructive testing techniques for post-process control of additively manufactured parts
journal, August 2017


Additive manufacturing of metallic components – Process, structure and properties
journal, March 2018


The metallurgy and processing science of metal additive manufacturing
journal, March 2016


Offline Predictive Control of Out-of-Plane Shape Deformation for Additive Manufacturing
journal, July 2016

  • Jin, Yuan; Joe Qin, S.; Huang, Qiang
  • Journal of Manufacturing Science and Engineering, Vol. 138, Issue 12
  • DOI: 10.1115/1.4033444

Advanced Manufacturing for Nuclear Energy
journal, June 2019


Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
journal, December 2015

  • King, W. E.; Anderson, A. T.; Ferencz, R. M.
  • Applied Physics Reviews, Vol. 2, Issue 4
  • DOI: 10.1063/1.4937809

Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
journal, June 2017


Physics of the Granular State
journal, March 1992


Pulsed Thermal Tomography Nondestructive Evaluation of Additively Manufactured Reactor Structural Materials
conference, January 2019

  • Bakhtiari, S.; Cleary, W.; Elmer, T.
  • Tranactions - 2019 Winter Meeting, Transactions of the American Nuclear Society - Volume 121
  • DOI: 10.13182/t30825

Improving the Density of Jammed Disordered Packings Using Ellipsoids
journal, February 2004